Manufacturing Engineer KalogonManufacturing EngineerMELBOURNE, FLProduct Improvement for Manufacturability - Design and implement product changes with a focus on rework rates, cost, and assembly time, utilizing direct feedback from production technicians and field feedback to validate improvements and surface further opportunities. - Manage analysis and disposition of units returned through the Return Authorization (RA) process, ensuring root cause is identified, findings are documented, and systemic corrective actions are driven when required.
Test Engineer (Dragon) SpaceXTest Engineer (Dragon)Cape Canaveral, FLTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The role will also require significant interface with the design engineers, providing the opportunity to continuously improve the capsule design and ground processing as the team works to establish aircraft-like operations on Dragon.
Systems Engineer Actalent IncSystems EngineerMelbourne, FL$55–$84.13 / hourLead end-to-end systems engineering activities across multiple related systems, including architecture definition, requirements development, interface management, risk assessment, verification planning, and participation in formal design reviews such as SRR, PDR, CDR, PRR, and TRR. Coordinate technical execution across internal teams and external partners to ensure a consistent system architecture, controlled interfaces, aligned schedules, and delivery of verified, compliant system capabilities.
New Graduate Engineer, Mechanical (Cape Canaveral) Space Exploration TechnologiesNew Graduate Engineer, Mechanical (Cape Canaveral)Cape Canaveral, FLWhether it's building out a new Starship launch pad and tower, Gigabay vertical integration facility, or scaling heat shield tile production, each day is filled with new and exciting challenges. Our team is building high performance flight hardware, high-volume rocket production lines, and a launch system that can rapidly and reliably launch and land our rockets.
Automation & Controls Engineer (Starship Launch Hardware) SpaceXAutomation & Controls Engineer (Starship Launch Hardware)Cape Canaveral, FLProficiency or direct hands-on experience in one or more of the following: electronics test rack design and build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond.
New Graduate Engineer, Mechanical (Cape Canaveral) SpaceXNew Graduate Engineer, Mechanical (Cape Canaveral)Cape Canaveral, FLTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Whether it’s building out a new Starship launch pad and tower, Gigabay vertical integration facility, or scaling heat shield tile production, each day is filled with new and exciting challenges.
Sr. Automation & Controls Engineer (Starship) SpaceXSr. Automation & Controls Engineer (Starship)Cape Canaveral, FLProficiency or direct hands-on experience in one or more of the following: electronics test rack design and build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond.
Electrical Engineer, Propellant Generation (Starship) SpaceXElectrical Engineer, Propellant Generation (Starship)Cape Canaveral, FLELECTRICAL ENGINEER, PROPELLANT GENERATION (STARSHIP) As a member of the Starship Launch Engineering team, you will focus on the electrical design and field support for propellant generation systems that enable rapid, high-volume production of liquid oxygen and methane. You will work with a group of elite engineers across multiple disciplines to design, install, and activate air separation plants (ASUs), liquefaction equipment, and gas turbine-based power generation infrastructure required to support Starship orbital launch capability.
Electrical Engineer, Launch Infrastructure (Starship) SpaceXElectrical Engineer, Launch Infrastructure (Starship)Cape Canaveral, FLAs a member of the Starship Launch Engineering team, you will work with a group of elite engineers across multiple disciplines to design, build, and activate infrastructure that will enable orbital launch capability for the largest rocket in the world. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewSr. Automation & Controls Engineer (Starship) Space Exploration TechnologiesSr. Automation & Controls Engineer (Starship)Cape Canaveral, FLPREFERRED SKILLS AND EXPERIENCE: Proficiency or direct hands-on experience in one or more of the following: electronics test rack design and build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond.
Electrical Engineer, Propellant Generation (Starship) Space Exploration TechnologiesElectrical Engineer, Propellant Generation (Starship)Cape Canaveral, FLYou will work with a group of elite engineers across multiple disciplines to design, install, and activate air separation plants (ASUs), liquefaction equipment, and gas turbine-based power generation infrastructure required to support Starship orbital launch capability. As a member of the Starship Launch Engineering team, you will focus on the electrical design and field support for propellant generation systems that enable rapid, high-volume production of liquid oxygen and methane.
Electrical Engineer, Launch Infrastructure (Starship) Space Exploration TechnologiesElectrical Engineer, Launch Infrastructure (Starship)Cape Canaveral, FLAs a member of the Starship Launch Engineering team, you will work with a group of elite engineers across multiple disciplines to design, build, and activate infrastructure that will enable orbital launch capability for the largest rocket in the world. Working knowledge of switchgear, motor control centers, variable frequency drives, transformers, building lighting, building construction specifications, and facility grounding.
NewElectronics Engineer Senior (Level III) Lockheed Martin CorpElectronics Engineer Senior (Level III)Cape Canaveral, FL$85,300–$158,300 / yearLockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate''s work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer. This position does not support teleworking; you will be located near our Lockheed Martin Space facility in: Cape Canaveral, FL and be expected to work a flexible 9x80 schedule in the office full-time.
NewElectronics Engineer Sr - E3 Lockheed Martin CorpElectronics Engineer Sr - E3Cape Canaveral, FL$85,300–$158,300 / yearLockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate''s work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer. Join Our Team as an Electronics Engineer III and become a member of the US Navy''s Fleet Ballistic Missile (FBM) D5 Life Extension 2 (D5LE2) Electrical Ground Support Equipment (EGSE team.
Mechanical Engineer, Tower & Launch Mount (Starship) Space Exploration TechnologiesMechanical Engineer, Tower & Launch Mount (Starship)Cape Canaveral, FLThe Starship launch mount and catch tower will redefine ground support systems for launch vehicles as we know them, with the ultimate goal of launching, catching, and relaunching orbital boosters in hours or days instead of weeks or months. Furthermore, Mechanical Engineers will be expected to sometimes act as de facto supervisors and advisors to production technicians, welders, and other skilled labor partners.
Sr Test Engineer - Cape Canaveral Florida General Dynamics CorpSr Test Engineer - Cape Canaveral FloridaCape Canaveral, FL$86,091–$93,154 / yearAs a Senior Support Engineer II, you will become part of the engineering team responsible for supporting the Pod Ground Control (PGC) System, the primary ground control and test system used during missile guidance system development, integration, verification, and flight test operations. This position offers an excellent opportunity for engineers who enjoy solving technical problems, working with hardware and software, supporting mission operations, and collaborating with government and industry partners in a fast-paced engineering environment.
Process Engineer Brunswick CorpProcess EngineerMerritt Island, FL$82,600–$133,000 / yearSee how your contributions will help transform vision into reality: Position Overview: Provide daily production support to the Brunswick Integrated Manufacturing Center through the Gemba process in order to improve safety, quality, delivery and cost by analyzing process & quality data; utilizing root cause analysis to eliminate variation; implementing engineering changes and work instructions; designing new processes and systems to improve the flow of product through production. Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern.
Mechanical Engineer Amentum Services IncMechanical EngineerKennedy Space Center, FLThe COMET contract provides overall management and implementation of ground systems capabilities, flight hardware processing, and launch operations at NASA''s Kennedy Space Center (KSC) in Florida. These tasks will support the International Space Station, Ground Systems Development and Operations, and the Space Launch System, Orion Multi-Purpose Crew Vehicle, and Launch Services programs.
Sr. Mfg Quality Engineer, Amazon Leo Amazon.com IncSr. Mfg Quality Engineer, Amazon LeoMerritt Island, FLIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Additional Requirements: Must be able to obtain and maintain a US Passport and must meet customs entry requirements to include but not limited to: Yellow Fever vaccine and other immunization requirements as recommended by the U.S. Centers for Disease Control and Prevention.
Sr. Automation & Controls Engineer Starship Space Exploration Technologies CorpSr. Automation & Controls Engineer StarshipCape Canaveral, FLPREFERRED SKILLS AND EXPERIENCE: Proficiency or direct hands-on experience in one or more of the following: electronics test rack design and build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.