Quality Inspector Forgent Power Solutions IncQuality InspectorCommerce, CA$25–$30 / hourJob Summary: We are seeking a Quality Control Inspector who will perform inspections and verification tasks to ensure products and services meet customer requirements, tolerances, and specifications. Continuously look for ways to improve personal skills, the department, and overall processes.
Quality Inspector 2 Parker Hannifin CorpQuality Inspector 2Simi Valley, CA$21.20–$35.35 / hourParker Meggitt, a recent addition to Parker Hannifin, is a global leader in the Commercial and Military Aerospace markets, specializing in a wide range of products including fire and smoke detection systems, extinguishing systems, bleed air overheat detection systems, actuators, rudder pedal assemblies, pumps, fuel gauging systems, and high-temperature cables. Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.
Apprentice Quality Inspector Senra SystemsApprentice Quality InspectorRedondo Beach, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Create and maintain inspection documentation, including First Article Inspection Reports (FAIRs), Inspection Reports, Certificates of Conformance (CoC), and End Item Data Packages (EIDPs).
Quality Inspector Senra SystemsQuality InspectorRedondo Beach, CaliforniaTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Create and maintain inspection documentation, including First Article Inspection Reports (FAIRs), Inspection Reports, Certificates of Conformance (CoC), and End Item Data Packages (EIDPs).
Quality Final Inspector Careers in AviationQuality Final InspectorBurbank, CaliforniaWith 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries.
Construction Inspector Leland Saylor AssociatesConstruction InspectorLos Angeles, CAInspectors with good knowledge and ability to inspect large scale construction of airport and public building facilities, which may include steel and concrete structures, architectural finishes and components, and other construction related to the airport terminal operations to ensure conformance with safety regulations, plans, specifications, and other applicable documents. The Construction Inspector will support Los Angeles World Airport's (LAWA’s) construction inspection and work as a member of LAWA Quality Assurance & Construction Inspection Division across multiple projects within LAWA’s Tenant Improvement Program primarily focusing on building disciplines.
Inspector (Machined Parts) – $25–$35/hr – Full‑Time Maetz ConsultingInspector (Machined Parts) – $25–$35/hr – Full‑TimeLos Angeles, California$25–$35 / hourWhat You Bring: High school diploma or equivalent experience 5+ years inspecting machined parts 5+ years using precision inspection tools (calipers, micrometers, etc.) 5+ years working directly with customer source inspectors Strong blueprint reading and interpretation skills Solid understanding of customer specifications and requirements Exceptional attention to detail, organization, and communication skills Ability to work effectively with all levels of management and production staff (with the help of translator) Compensation $25–$35 per hour DOE Full‑time, hourly position with long‑term stability and growth potential. What You’ll Do: Support AS9100 quality procedures and continuous improvement initiatives Maintain a clean, organized, and safety‑focused work area Generate accurate inspection reports and documentation Perform detailed mechanical and visual inspections on machined products Present product and data packages to customer source inspectors Partner with program managers to coordinate inspection activities Complete additional duties as assigned to support production and quality goals Requirements.
Ultrasonic Inspector Level 2 L3Harris Technologies IncUltrasonic Inspector Level 2Canoga Park, CA$33.14–$57.32 / hourThe Ultrasonic Inspector Level 2 is responsible for inspecting ferrous and nonferrous raw stock details, brazed assemblies machined parts, diffusion bonded parts and assemblies for defects and compliance with fracture control requirements, engineering drawings, customer acceptance criteria or other critical established requirements using ultrasonic inspection equipment and processes. Set up and operate immersion and contact ultrasonic equipment for inspection of machined and detail parts, assemblies, weldments and materials, including those having high stress, temperature or pressure limits to exacting tolerances where accessibility requires the use of special probes and variations in surfaces, thickness or materials result in critical acoustical interference.
Railroad Track Inspector RAILPROS IncRailroad Track InspectorCalifornia, CADriven by a passion for our people, clients, and communities, we are committed to solving our customers' challenges and earning their trust through teamwork, continuous improvement, and service excellence. An Innovative, Industry Leading Environment (Innovation): Our Innovation pillar fuels creative problem solving, modern technology adoption, and breakthrough thinking that positions RailPros as a leader in the rail and transit space.
Construction Inspector TRC Companies, Inc.Construction InspectorLos Angeles, California$55–$95 / hourFull timeResponsibilities: Provide daily inspections and complete documentation including daily reports documenting contractor labor, equipment, daily construction progress, project site visitors, non-conforming work, safety issues, traffic control, field measured quantiles, field discussions with the contractor and public, and daily project photographs, etc. This role will focus on all aspects of required field and office construction work, including but not limited to, inspection of non-structural and structural construction operations, inspection of traffic control system compliance, CCO preparation and analysis, CPM scheduling analysis, and SWPPP enforcement.
Inspector Volt Information Sciences IncInspectorGardena, CAVolt isHiringVolt isimmediatelyhiringfor a Quality Inspector inGardena CA.As Quality Inspector you will Interpret engineering drawings inspection procedures work orders and setup instructions. Pay Rate23.00 per hourPay range offered to a successful candidate will be based on several factors including the candidates education work experience work location specific job duties certifications etc.
Electrical / IT Inspector The Greenridge GroupElectrical / IT InspectorLos Angeles, CA$145,000–$160,000 / yearGreenridge Group is seeking an experienced Electrical / IT Inspector to support the Los Angeles World Airports (LAWA) Quality Assurance & Construction Inspection Division across multiple projects within LAWA’s Capital Improvement Program. Inspect IT and low-voltage infrastructure, including voice/data, security systems, access controls, cameras, public-address systems, communication cabling, and equipment rooms.
Aerospace Quality Inspector - 2nd shift Regal Rexnord CorpAerospace Quality Inspector - 2nd shiftSimi Valley, CA$24–$28 / hourThe Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Ability to apply visual inspection techniques and perform "Go/No Go" gage type inspections; possess aptitude/ability to perform required inspections using simple inspection set-up(s) constructed by either a higher level Inspector.
Precision Inspector (Machining) SpaceXPrecision Inspector (Machining)Hawthorne, CA$24–$31 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Precision Inspector (Rocket Valves) - 2nd Shift SpaceXPrecision Inspector (Rocket Valves) - 2nd ShiftHawthorne, CA$26–$32 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Electrical/ IT Construction Inspector - Airport TDIP CLMI Group, LLCElectrical/ IT Construction Inspector - Airport TDIPLos Angeles, CA$133,000–$134,000 / yearConduct comprehensive daily inspections of electrical and IT systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications; review and interpret construction documents including blueprints, shop drawings, submittals, RFIs, and change orders. CLMI Group is seeking an Inspector, Electrical/IT to support Los Angeles World Airports' (LAWA) Quality Assurance & Construction Inspection Division across multiple projects within LAWA's Capital Improvement Program.
Welding Inspector ENGICON CMWelding InspectorALHAMBRA, CAFull timeUnder the oversight and direction of Department Section Heads, Area Supervisors, or consultant Construction Managers Welding Inspectors will be assigned to bridge construction, bridge seismic retrofit, retaining wall, water tank, water line and other projects during and in support of welding operations as needed for quality assurance. Desired Qualifications: Current American Welding Society Certification as a Certified Welding Inspector, or Senior Certified Welding Inspector, with a minimum of 10 years experience, and holds a current International Code Council (ICC) Welding Certificate and an ICC High Strength Bolting Certificate.
Welding Inspector DVJ Consulting EngineersWelding InspectorLos Angeles, CaliforniaRoles and Responsibilities: a) Under the oversight and direction of Department Section Heads, Area Supervisors, or consultant Construction Managers Welding Inspectors will be assigned to bridge construction, bridge seismic retrofit, retaining wall, water tank, water line and other projects during and in support of welding operations as needed for quality assurance. Desired Qualifications: Current American Welding Society Certification as a Certified Welding Inspector, or Senior Certified Welding Inspector With a minimum of 10 years experience and hold a current International Code Council (ICC) Welding Certificate and an ICC High Strength Bolting Certificate.
Welding Inspector Engicon CmWelding InspectorAlhambra, CaliforniaRoles and Responsibilities: Under the oversight and direction of Department Section Heads, Area Supervisors, or consultant Construction Managers Welding Inspectors will be assigned to bridge construction, bridge seismic retrofit, retaining wall, water tank, water line and other projects during and in support of welding operations as needed for quality assurance. Desired Qualifications: Current American Welding Society Certification as a Certified Welding Inspector, or Senior Certified Welding Inspector, with a minimum of 10 years experience, and holds a current International Code Council (ICC) Welding Certificate and an ICC High Strength Bolting Certificate.
Electronics Quaity Inspector SelectStaffingElectronics Quaity InspectorMoorpark, CA$25–$30 / hourEducation and/or experience: Knowledge of product, ISO process, IPC A610 Latest Revision, J-STD-01 Latest revision. Perform INCOMING inspections for all level boards and components and record results.