Facility Design Fire Protection Engineer III Blue Origin Enterprises LPFacility Design Fire Protection Engineer IIIHuntsville, AL$121,023–$169,432.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewBuilding Automation Systems (BAS) Specialist PinnacleBuilding Automation Systems (BAS) SpecialistMobile, AL$60,000–$75,000 / yearThe specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup.
Systems Engineer ASRC Federal Holding CompanySystems EngineerHuntsville, ALASRC Federal Mission Solutions is a premier provider of systems engineering, software engineering, system integration and project management services for real-time, mission-critical defense systems. The salary offered will depend on several factors including, but not limited to, relevant experience, skills, education, geographic location, internal equity, business needs, and other factors permitted by law.
Senior Systems Engineer ASRC Federal Holding CompanySenior Systems EngineerHuntsville, ALASRC Federal Mission Solutions is a premier provider of systems engineering, software engineering, system integration and project management services for real-time, mission-critical defense systems. The salary offered will depend on several factors including, but not limited to, relevant experience, skills, education, geographic location, internal equity, business needs, and other factors permitted by law.
Co-Op Process Engineer - Spring 2027 Packaging Corporation of AmericaCo-Op Process Engineer - Spring 2027Jackson, ALCurrently attending a participating University (Mississippi State University, The University of Mississippi, Auburn University, University of Alabama, University of South Alabama, University of Maine, University of North Carolina State, University of Miami Ohio, Georgia Tech, University of Tennessee or Tennessee Technology University, majoring in Paper Science or Chemical/Electrical/Mechanical Engineering or other related majors. The individual will be assigned project work including process optimization and studies, process safety evaluations, data analysis, capital project scope and justification, and other process related projects.
Software Architect Vets HiredSoftware ArchitectHuntsville, AlabamaThis role provides technical leadership and subject matter expertise across multiple Army Acquisition Category (ACAT) II programs, including Major Capability Acquisition (MCA) and Middle Tier Acquisition (MTA) rapid prototyping efforts. Serving in a Systems Engineering and Technical Assistance (SETA) capacity, the role augments a government program office by providing software architecture expertise throughout the full system lifecycle—from requirements definition and source selection through design, development, test and evaluation, training, and sustainment.
Engineering Manager Accura EngineeringEngineering ManagerHuntsville, AlabamaJob Title: Engineering Manager **Work Location: Marshall Space Flight Center (MSFC), Huntsville, AL ** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Position Summary: We are seeking an experienced Engineering Manager to provide leadership and technical oversight for engineering services under contract at the Marshall Space Flight Center. The Engineering Manager will be responsible for guiding multidisciplinary engineering teams, ensuring technical excellence, and coordinating closely with program leadership to deliver high-quality, timely, and cost-effective solutions.
Drafter - Substation Quanta Infrastructure Solutions Group, LLCDrafter - SubstationBirmingham, AlabamaFull timeThe QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. We encourage and inspire our people to embrace opportunities within our corporate office and 200 operating companies providing solutions for the utility, renewable energy, electric power, industrial, and communications industries worldwide.
Sitework Designer II – 4P/747 4P ConsultingSitework Designer II – 4P/747Birmingham, AlabamaThis position is responsible for preparing grading, drainage, erosion control, and stormwater management designs using AutoCAD Civil 3D, while providing technical support to engineering teams and field personnel. Southern Company Services is seeking an experienced Sitework Designer II to support civil site design for transmission substation projects across Alabama and Mississippi.
Hvac Tech WillScot CorporationHvac TechMoody, ALPerforms repairs, and modifications (where applicable), to all products to include framing and finish carpentry, electrical, flooring, plumbing, painting, running gear, and all other facets of modular building repair. Some knowledge of computer is necessary and good communication skills are required for dealing with customers, sales people, contractors, shop personnel as well as Williams Scotsman employees at various branch locations.
Process Controls Engineer INEOSProcess Controls EngineerTheodore, AlabamaPromote and ensure a sustained commitment to operating without harm to our employees, contractors, third parties, communities, the environment, and our assets by visibly demonstrating leadership in safety Promote safety and safe actions through communication such as discussing safety with employees/contractors before job tasks, during meetings, and as opportunities arise to promote safety to the fullest extent possible Develop and implement preventative maintenance and inspection plans for the facility’s DCS/PLC control systems, Emergency Shutdown system, Data Historian, and Alarm Management system to ensure safe and reliable performance Develop and implement a system to measure, track, and report on reliability and availability of the DCS, ESD, PLC, Data Historian, and Alarm management systems. Develop and implement control strategies including loop tuning, process variable calculations, alarm configuration, and interlocks to improve operational performance Develop and implement advanced control algorithms and control sequences to continuously improve process safety, stability, efficiency and reliability Support to the production, maintenance, ES&H, laboratory, and engineering departments, by analyzing process and system data to evaluate upsets, equipment failures, quality issues, etc.
Civil Engineer III Quanta Power Solutions, LLCCivil Engineer IIIBirmingham, AlabamaFull timeOur integrated approach spans power generation, battery energy storage, renewables, transmission, substation, and underground infrastructure — from concept to commissioning, we execute complex power infrastructure projects with the speed, certainty, and operational excellence our customers depend on. About this Role: Quanta Power Solutions is seeking an experienced Civil Engineer III to support the design and execution of EPC power generation, renewable energy, battery energy storage system (BESS), substation, transmission, and industrial infrastructure projects.
NewAssociate Project Manager - Michels Underground Cable, Inc Michels CorporationAssociate Project Manager - Michels Underground Cable, IncMontgomery, AlabamaInstalling underground cables for power transmission, power distribution, renewable energy and communication networks is a necessary step in hardening the electrical grid, delivering reliable communication networks, and integrating renewable energy into our existing systems. The Associate Project Manger will assist on essential project duties including cost and labor tracking, material submittals, subcontractor management, contract compliance, etc. that will optimize performance, productivity, and reduce costs.
NewProject Manager - Michels Underground Cable, Inc Michels CorporationProject Manager - Michels Underground Cable, IncMontgomery, AlabamaInstalling underground cables for power transmission, power distribution, renewable energy and communication networks is a necessary step in hardening the electrical grid, delivering reliable communication networks, and integrating renewable energy into our existing systems. This position is accountable for all aspects of a project success from the initial proposal/bidding process to meet or exceed the clients’ expectations, to the profitable completion of the jobs, with a special emphasis on safety performance.
Principal GNC Engineer ALTEN Technology USAPrincipal GNC EngineerHuntsville, AL$155,000–$170,000 / yearThese development efforts will generally be small focused design teams, which will require engineers to use a range of skills and tools across traditional engineering, computer science, and mathematical disciplines. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
ELECTRICIAN TECHNICIAN 2 U.S. Space and Rocket CenterELECTRICIAN TECHNICIAN 2Huntsville, ALManage work orders and scheduled maintenance using Computer Maintenance Management Software (CMMS) (current software is FMX Work Order & Asset Management). Sight, reading, wrist movement, and feeling to operate computer terminal, handle documents, operate automobile for travel, and interact with vendors.
Lighting Specialist II 4P/527 4P ConsultingLighting Specialist II 4P/527Birmingham, AlabamaCollaborate with Lighting Services Sales , Lighting Construction Coordinators , NESC engineers , APC Power Delivery partners , ALDOT , outside engineering firms, architects, lighting vendors, and contractors. This role partners closely with sales teams, engineers, vendors, contractors, and utility stakeholders to deliver safe, efficient, and cost-effective lighting designs from concept through construction.
BC Electrician Warrior Met CoalBC ElectricianBerry, AlabamaTroubleshoot and perform electrical repairs faults with electrical wiring and equipment, including transformers, motors, instrumentation (limit switches, flow meters, totalizers, etc.), generators, lighting systems, protective relays, switchgear and associated components, control panels and associated equipment. Must be able to work in extreme conditions, including but not limited to changing weather conditions, dust, mud, varying levels of noise from low to high decibels, varying degrees of light and dark, in and around artificial light and in a confined work area.
Constructability Coordinator II 4P/597 4P ConsultingConstructability Coordinator II 4P/597Birmingham, AlabamaCollaborate with Lighting Account Executives, Sales Consultants, and Lighting Design Analysts to ensure lighting designs meet NEC, safety, and Southern Company specifications. This role is responsible for coordinating, scheduling, tracking, and managing lighting system installations and maintenance projects.
Construction Inspector-Aviation Accura EngineeringConstruction Inspector-AviationHuntsville, AlabamaAlternatively, an Associate degree (two- year degree)/Technical Training degree (two years of training) in construction management, engineering, or related field, along with 6 years’ experience in construction inspection. Experience performing inspections of construction activities, including concrete, buildings, electrical systems, electrical, HVAC systems, and insulation.