Maintenance Trades Specialist II - Electrical JT4 LLCMaintenance Trades Specialist II - ElectricalEdwards AFB, California$80,200–$90,000 / yearWorking under limited supervision of the work unit Lead, the incumbent must have a general knowledge of maintenance trades (i.e. electrical, structural, carpentry and/or plumbing assemblies) with high-level skills and knowledge of Electrical systems, to effect repairs of facilities, machinery, mechanical equipment, and other related subsystems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
Maintenance Trades Specialist I - Electrical JT4 LLCMaintenance Trades Specialist I - ElectricalEdwards AFB, California$75,400–$84,000 / yearWorking under moderate supervision of the work unit Lead, the incumbent must have a general knowledge of maintenance trades (i.e. electrical, structural, carpentry and/or plumbing assemblies) with moderate-level skills and knowledge of Electrical systems, to effect repairs of facilities, machinery, mechanical equipment, and other related subsystems. In addition, a Maintenance Trades Specialist I Electrical must possess the following qualifications: Must possess a working knowledge of the technical terminology and language structure related to a variety of electrical and mechanical equipment/systems supported by the work unit.
NewAerospace Electrical Engineer Johnson Service GroupAerospace Electrical EngineerChatsworth, CA$95,000–$120,000 / yearThis position offers the opportunity to work on advanced aerospace technologies supporting both flight and simulator instrumentation, while contributing to products that demand precision, reliability, and engineering excellence. Required Qualifications Bachelor's degree in Electrical Engineering, Software Engineering, Aerospace Engineering, Computer Engineering, or a related technical discipline.
Electrical Engineer IV Artech LLCElectrical Engineer IVValencia, CA$65.35–$83.44 / hourSenior Electrical/Hardware Engineer supporting Neuromodulation medical device R&D , focused on analog/digital circuit design, PCB development, testing, troubleshooting, and product development from concept to commercialization. Create schematics, BOMs, assembly drawings, and engineering documentation.
Engineer Electrical - Subsystems Northrop Grumman CorpEngineer Electrical - SubsystemsPalmdale, CA$171,000–$256,400 / yearSupport design requirements for electrical power generation, conversion and distribution systems, and circuit protective requirements for aerospace vehicle systems including Electrical Loads Analysis, test procedures, power architectures, reports, analyses, and other vehicle power related deliverables. Responsibilities Include: Develop electrical wiring designs of a functional system including the selection of aircraft-type conductors and electro-mechanical components such as connectors, relays, switches, circuit breakers, terminal junction systems.
Principal OR Sr. Principal Electrical Engineer - Vehicle Subsystems & Integration Northrop Grumman CorpPrincipal OR Sr. Principal Electrical Engineer - Vehicle Subsystems & IntegrationCA$93,300–$171,000 / yearBasic Qualifications for Senior Principal Electrical Engineer: Bachelor's Degree in a related Science, Technology, Engineering or Math (STEM) discipline and 8 years of experience in electrical engineering; OR a Master's Degree in a related STEM discipline with 6 years of electrical engineering experience; OR a PhD in a related STEM discipline with 4 years of electrical engineering experience. Basic Qualifications for Principal Electrical Engineer: Bachelor's Degree in a related Science, Technology, Engineering or Math (STEM) discipline and 5 years of experience in electrical engineering; OR a Master's Degree in a related STEM discipline with 3 years of electrical engineering experience; OR a PhD in a related STEM discipline with 1 year of electrical engineering experience.
Lead Electrical Engineer-Feb23 Keltia Design IncLead Electrical Engineer-Feb23Chatsworth, CAProvide technical expertise for trouble shooting, root cause analysis, and corrective action for aircraft systems failures which will include, but are not limited to: pneumatics, hydraulics, water/waste, smoke detection, environmental control, cooling, oxygen, APU, and power plant. If interested, please send your updated resume in Word doc format to Kevin at Kevin@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
Staff Engineer Subsystems Mechanical - Electrical Design Northrop Grumman CorpStaff Engineer Subsystems Mechanical - Electrical DesignPalmdale, CA$171,000–$256,400 / yearBasic Qualifications: • Basic Qualifications for a Sr Principal Engineer include a Bachelors in Science, Technology, Engineering or Math (STEM) and a minimum of 12 years of experience in Aerospace structural design OR an MS degree in STEM with 10 years of related experience OR a PhD in STEM and 7 years of related experience. • Support design requirements for electrical power generation, conversion and distribution systems, and circuit protective requirements for aerospace vehicle systems including Electrical Loads Analysis, test procedures, power architectures, reports, analyses, and other vehicle power related deliverables.
Senior Principal Engineer - Subsystems Electrical Design Northrop Grumman CorpSenior Principal Engineer - Subsystems Electrical DesignPalmdale, CA$116,300–$213,400 / yearBasic Qualifications: Basic Qualifications for a Sr Principal Engineer include a Bachelors in Science, Technology, Engineering or Math (STEM) and a minimum of 8 years of experience in Aerospace structural design OR an MS degree in STEM with 6 years of related experience OR a PhD in STEM and 4 years of related experience. Support design requirements for electrical power generation, conversion and distribution systems, and circuit protective requirements for aerospace vehicle systems including Electrical Loads Analysis, test procedures, power architectures, reports, analyses, and other vehicle power related deliverables.
Electrical Design Engineer Motive Workforce SolutionsElectrical Design EngineerSanta Clarita, CA$40–$55 / hourElectrical Design Engineer The Electrical Design Engineer will support the development of advanced electrical systems and components for high‑performance vehicle programs. Responsibilities include designing electrical components and subsystems, creating 3D/2D models, and developing wire harnesses and high‑voltage components.
Electrical Engineer, Graduate Curtiss-Wright CorpElectrical Engineer, GraduateSanta Clarita, CA$65,700–$87,600 / yearThe Graduate Engineer will work under the guidance of senior engineers, contributing to design, analysis, testing, and problem-solving efforts related to engineering projects. The Curtiss-Wright Defense Solutions facility in Santa Clarita, California is the center of excellence for hardware level system integration and advanced package design.
Senior Engineer, Electrical Test - ATE Sonova Holding AGSenior Engineer, Electrical Test - ATEValencia, CA$100,320–$150,480 / yearMore about you: Required: Bachelor's degree in an appropriate engineering field or equivalent experience, with 5+ years of experience in electrical test systems, embedded hardware, and software for Class III medical devices; Preferred: Master of Engineering or related field and 10+ years of related experience. The Senior Electrical Test Engineer is responsible for the design and specification and construction of automated test equipment (ATE) to verify the design and the manufacturing of Medical Class III systems, consisting of active implantable and external devices, at AB and/or vendor locations.
Aircraft Electrical Engineer- Level 3 Lockheed Martin CorpAircraft Electrical Engineer- Level 3Palmdale, CA$85,500–$150,765 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765. As the Aircraft Electrical Engineer- Level 3 you will be responsible for researching, developing, and defining Electrical Power System (EPS) architecture, requirements, and analysis in coordination with system engineering and other specialty disciplines.
NewAircraft Electrical Engineer Lockheed Martin CorpAircraft Electrical EngineerPalmdale, CA$104,500–$184,115 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $104,500 - $184,115. We provide the resources and give you the flexibility to enable inspiration and focus - if you have the passion and courage to tackle challenging problems, work hard, and enjoy what you do, we want to build a better tomorrow with you.
Electrical Design Engineer Motive CompaniesElectrical Design EngineerSanta Clarita, CA$40–$55 / hourElectrical Design Engineer The Electrical Design Engineer will support the development of advanced electrical systems and components for high‑performance vehicle programs. Responsibilities include designing electrical components and subsystems, creating 3D/2D models, and developing wire harnesses and high‑voltage components.
Electrical Integration & Test Engineer Advanced Technology Innovation Corp.Electrical Integration & Test EngineerChatsworth, CA$85–$115 / hourREQUIRED SKILLS/EXPERIENCE: BS in EE or STEM with 8 yrs Engineerign Exp . Experience with at least one programming language or script .
Electrical Harness Engineer - Level 3 Lockheed Martin CorpElectrical Harness Engineer - Level 3Palmdale, CA$85,500–$150,765 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $85,500 - $150,765. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays.
NewSenior Aircraft Electrical Power Systems Engineer Lockheed Martin CorporationSenior Aircraft Electrical Power Systems EngineerPalmdale, CAThe role demands a Bachelor's degree in Electrical Engineering, experience with CAD tools, and strong problem-solving skills. Lockheed Martin in Palmdale, California is seeking an Aircraft Electrical Engineer – Level 3 for the Electrical Power Systems team.
Electrical Tech Johnson Service GroupElectrical TechValencia, CAMust be able to read and write in English, can document test findings, follow verbal and written instructions, have proper math skills to perform conversion calculations, and the ability to interpret blueprints, complex electrical wiring schematics, test procedures and instructions. Essential Responsibilities Interprets blueprints, complex electrical wiring schematics, test procedures and shop order instructions to set up and perform functional test, and electrical, under minimum supervision on a variety of products.
Electrical Harness Engineer - Level 2 Lockheed Martin CorpElectrical Harness Engineer - Level 2Palmdale, CA$70,100–$123,625 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $70,100 - $123,625. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays.
Electrical Instrument Technician CalPortland Co IncElectrical Instrument TechnicianMojave, CAuses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M's, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes; climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties Maintains equipment, work areas, measuring instruments and tools Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work; performs cutting and welding; paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc. Walk on all types of surfaces (uneven and/or slippery ground) Ability to work in surroundings that include dust, vibration, heights and confined spaces Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process Exposure to cement, clay, limestone and various chemicals.
NewElectrical Assemblers Needed! Call Or Text Express Employment Professionals DefunctElectrical Assemblers Needed! Call Or TextPalmdale, CA$16.90–$19 / hourUtilize hand tools, electronic, and pneumatic tooling to assemble electrical or electronic systems, support structures, and install components, units, subassemblies, wiring, or assembly casings using soldering or fasteners. The ideal candidate will be responsible for performing bench-like processes, electrical assemblies, tooling, wiring, harnessing, soldering, crimping wires, blueprint reading, assembly, and wire stripping.
NewHybrid District Planning Engineer - Electrical Utilities Southern California EdisonHybrid District Planning Engineer - Electrical UtilitiesLancaster, CAThis hybrid position requires visits to the Antelope Valley Service Center and possible travel within the service territory.#J-18808-Ljbffr. Your technical abilities combined with experience in electrical utility are crucial to successfully managing multiple projects.
Electrical Inspector Innovation ConsultingElectrical InspectorPalmdale, CaliforniaThe Inspector will be embedded with the construction management team on-site, providing day-to-day field inspection and quality oversight across the full electrical scope: incoming medium-voltage switchgear, step-down transformer installation, power distribution centers, load migration, and programmable logic controller installations. Inspect installation of medium-voltage electrical equipment, including incoming switchgear, step-down power transformers, power distribution centers (PDCs), motor control centers (MCCs), and associated conductors, conduit systems, and terminations.
Electrical Commissioning Manager Innovation ConsultingElectrical Commissioning ManagerPalmdale, CaliforniaThe program involves the installation and commissioning of new medium- and high-voltage electrical infrastructure, including a new utility service connection, switchgear, power transformers, power distribution centers, load migration, and programmable logic controller installations, as part of an ongoing compressor modernization effort. Innovation Consulting is partnered with a leading infrastructure and engineering services firm to recruit an Electrical Commissioning Manager for a utility capital improvement program at an operating natural gas compression and storage facility in the Santa Clarita area.
Electrical Technician II AmentumElectrical Technician IILancaster, CaliforniaDiagnoses, troubleshoots, maintains, and repairs electrical equipment and control circuits from 24v up to and including 480V AC, electro-mechanical test devices, instrumentation devices, PLCs / ladder logic controllers, and variable frequency drives as necessary. This position is responsible for performing at the intermediate level of expertise with assisting in performing preventative maintenance on the heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems.
Electrical Superintendent I - Solar - CA M. A. Mortenson CoElectrical Superintendent I - Solar - CACA$125,600–$188,400 / yearMortenson is currently seeking an experienced Electrical Superintendent I to provide coordination, planning, and supervision to Assistant Electrical Superintendents, contractors, and craft activities in a specific area of discipline. Coordinate work projects within the electrical scope, ensuring high-quality installation of electrical portions, including underground cabling, overhead lines, and substation construction.
Wastewater Treatment Electrician (Electrical & Instrumentation Technician) (LA-008-26E), Valencia Sanitation Districts of Los Angeles CountyWastewater Treatment Electrician (Electrical & Instrumentation Technician) (LA-008-26E), ValenciaValencia, CA$105,828–$131,484 / yearJOB SUMMARY: Under the general supervision of a Supervisor of Electrical and Instrumentation Repair, incumbents assemble, install, maintain, calibrate, troubleshoot and repair and/or replace electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; operate, maintain, calibrate and repair pneumatic and electronic testing and measuring instruments; maintain records and prepare reports on maintenance and repair work, calibration readings and related data; order parts, supplies and equipment; instruct lower level classes in the series; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; perform math calculations related to the trades; drive to and perform inspections on new construction; maintain shop area; and perform related duties as required. Ability to: Utilize specialized tools, math formulas and equipment of the trade; independently troubleshoot and repair electrical, electronic, mechanical, pneumatic, hydraulic, digital and analog control equipment and systems; read, interpret and prepare schematic diagrams, blueprints, sketches and equipment specifications; maintain records and prepare reports; independently perform difficult assignments; instruct lower-level apprentices in trade techniques.
Electrical Engineer RIDE MobilityElectrical EngineerLancaster, CA$70,000–$90,000 / yearDrive continuous improvement to electrical best practices by evaluating industry tools and techniques, collaborating with the Electrical and Software Engineering team to discuss implementation. •Maintain an awareness of how assigned tasks impact schedule, scope, budget, and quality at every stage of development, from concept to end of life.
Maintenance Trades Specialist II - Electrical Jt4 LLCMaintenance Trades Specialist II - ElectricalLancaster, CA$80,200–$90,000 / yearWorking under limited supervision of the work unit Lead, the incumbent must have a general knowledge of maintenance trades (i.e. electrical, structural, carpentry and/or plumbing assemblies) with high-level skills and knowledge of Electrical systems, to effect repairs of facilities, machinery, mechanical equipment, and other related subsystems. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
Maintenance Trades Specialist I - Electrical Jt4 LLCMaintenance Trades Specialist I - ElectricalLancaster, CA$75,400–$84,000 / yearWorking under moderate supervision of the work unit Lead, the incumbent must have a general knowledge of maintenance trades (i.e. electrical, structural, carpentry and/or plumbing assemblies) with moderate-level skills and knowledge of Electrical systems, to effect repairs of facilities, machinery, mechanical equipment, and other related subsystems. In addition, a Maintenance Trades Specialist I Electrical must possess the following qualifications: Must possess a working knowledge of the technical terminology and language structure related to a variety of electrical and mechanical equipment/systems supported by the work unit.
Electrical Inspection Technician American Electric Company IncElectrical Inspection TechnicianSanta Clarita, CA$19–$21 / hourThis role is ideal for someone who is punctual, responsible, and comfortable working early mornings and traveling to various job sites. American Electric Co. is seeking a reliable, motivated full-time employee to handle electrical inspections across our service areas.
Traveling Asst Electrical Superintendent - Energy Storage -Commercial Construction M. A. Mortenson CoTraveling Asst Electrical Superintendent - Energy Storage -Commercial ConstructionCA$102,900–$154,400 / yearMortenson is currently seeking an experienced Assistant Electrical Superintendent with the ability to interact with a variety of staff at all levels in an ever-changing environment, remaining flexible, resourceful, proactive and efficient with a high level of professionalism and confidentiality. Attend and participate in project meetings, and act as the liaison between field engineers and contractors or craft workers to ensure construction complies with drawings and specifications.
Substation Project Engineer David Evans and Associates IncSubstation Project EngineerSanta Clarita, CA$120,000–$150,000 / yearPotential office locations include: Los Angeles, CA; Ontario, CA; Santa Clarita, CA; Tustin, CA; Colorado Springs, CO; Denver, CO; Boise, ID; Coeur d''''Alene, ID; Pocatello, ID; Bend, OR; Corvallis, OR; Portland, OR; Salem, OR; Bryan/College Station, TX; Salt Lake City, UT; Bellevue, WA; Bellingham, WA; Everett, WA; Olympia, WA; Seattle, WA; Spokane, WA; Tacoma, WA; Vancouver, WA; Woodinville, WA; or Remote. Key Responsibilities: Create and oversee substation design deliverables from preliminary through IFC plan sets; deliverables may include but not limited to: one-line diagrams, schematics, wiring, general arrangements, conduit, grounding, equipment connection details, design criteria, equipment specifications, and construction specifications.
Sr. Engineer (Hardware Design) Integrated Resources, IncSr. Engineer (Hardware Design)Valencia, CA$70–$83 / hourAs a key member of a cross-functional team, the individual will be responsible for designing, testing, and troubleshooting electrical systems, driving innovation, enhancing product reliability, and maintaining engineering excellence in the development of electronic hardware for medical devices used in pain management and movement disorder therapies. Neuromodulation portfolio offers comprehensive, clinically proven solutions that enhance the quality of life for patients worldwide by silencing pain and treating movement disorders.
Building/Stationary Engineer PRIDE IndustriesBuilding/Stationary EngineerChatsworth, CaliforniaFull timeUnder limited supervision, the Building/Stationary Engineer performs the following skilled and technical duties; installing, maintaining, replacing, repairing, operating, or assisting in operating all heating and ventilation equipment, engines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, fans, siphons, also automatic and power-oiling pumps and engines. - Operating Engineer Apprenticeships, Technical Program Certifications, or Prior Military training in Building Automation Systems (BAS), Central Utility Plant (CUP) operations preferred; Knowledge of the methods, tools, and equipment used in the repair of heating and air conditioning equipment in buildings and structures;
Building/Stationary Engineer CROSSROADS DIVERSIFIED SERVICES, INC.Building/Stationary EngineerChatsworth, CAMINIMUM QUALIFICATIONS: Four years of journey-level experience operating, maintaining, and repairing HVAC/boiler equipment or a combination of training, education, and experience that provides the required knowledge and abilities of a universal CFC License; Completion of the Union's Supervision for Chief/Assistant Chief Engineers; Operating Engineer Apprenticeships, Technical Program Certifications, or Prior Military training in Building Automation Systems (BAS), Central Utility Plant (CUP) operations preferred; Knowledge of the methods, tools, and equipment used in the repair of heating and air conditioning equipment in buildings and structures; Through knowledge of operating principles, efficiency optimization practices, and compliance requirements of heating, air conditioning, and refrigeration equipment; Ability to use computerized energy management software; Ability to use basic arithmetic; Ability to recognize and locate conditions which require repair and maintenance work; Knowledge of the tools necessary to fulfil the duties of the engineer, including special equipment necessary to operate, install, maintain, and repair equipment; Ability to communicate effectively and respond to questions and requests; Effective written communication skills using appropriate business English; Computer literacy to use business software, the Internet, enter data/retrieve data; Human relations skills to build effective working relationships; Demonstrated customer service, problem solving and commonsense skills. POSITION SUMMARY: Under limited supervision, the Building/Stationary Engineer performs the following skilled and technical duties; installing, maintaining, replacing, repairing, operating, or assisting in operating all heating and ventilation equipment, engines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, fans, siphons, also automatic and power-oiling pumps and engines.