NewElectronics Technician U.S. NavyElectronics TechnicianRockwood, MIWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewAviation Electronics Technician U.S. NavyAviation Electronics TechnicianWilliamston, MIWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Electronics Assembler & Tester OPUS IVS INCElectronics Assembler & TesterDexter, MIGuided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. This position is responsible for small parts assembly, testing, and packaging of all OPUS-IVS electronic products in a manner that meets internal and customer quality and delivery expectations.
NewAviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianTaylor, MIWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
SITE MANUFACTURING PRODUCTION SUPERVISION TECHNICIAN - SUPERINTENDENT OP MobilitySITE MANUFACTURING PRODUCTION SUPERVISION TECHNICIAN - SUPERINTENDENTNew Boston, MIA world leader in onboard energy storage and emission reduction systems, OPmobility C-Power develops solutions for all types of powertrains including, gasoline, diesel, hybrids, plug-in hybrids and battery electric vehicles. Responsibility 2: • Responsible for ensuring all authorized Lockout/Tagout Employees have received the appropriate level of training and that these employees are provided with the proper equipment and personal protective equipment (PPE) to perform the job safely and that they are adhering to LOTO procedures.
NewAdvanced Electronics U.S. NavyAdvanced ElectronicsAllen Park, MIWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewComputer Field Technician U.S. NavyComputer Field TechnicianSouth Rockwood, MIWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewSolderer II OPUS IVS INCSolderer IIDexter, MIGuided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear.
NewFire Controlman U.S. NavyFire ControlmanSouthgate, MIWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewAviation Electrician’s Mate U.S. NavyAviation Electrician’s MateSouth Lyon, MIWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
EMC Electronics Technician - Sr North American Lighting IncEMC Electronics Technician - SrFarmington Hills, MI$55,000–$79,800 / yearThe ideal candidate will assist in maintaining electronics lab, order components, equipment for lab for modifying, testing electronics such as LED Drivers, AFS electronics; work with Lead Electrical engineer in testing of prototypes electronics; and create load boxes and data acquisition setups. As the market share leader in exterior automotive lighting, NAL provides advanced lighting technology, engineering design expertise, and state-of-the-art production capabilities to auto makers based in North America and around the world.
Electronics Technician - Sr North American Lighting IncElectronics Technician - SrFarmington Hills, MI$55,000–$79,800 / yearThe ideal candidate will assist in maintaining electronics lab, order components, equipment for lab for modifying, testing electronics such as LED Drivers, AFS electronics; work with Lead Electrical engineer in testing of prototypes electronics; and create load boxes and data acquisition setups. As the market share leader in exterior automotive lighting, NAL provides advanced lighting technology, engineering design expertise, and state-of-the-art production capabilities to auto makers based in North America and around the world.
Lead Field Service Electronics Technician Eaton Corporation PlcLead Field Service Electronics TechnicianSouthfield, MIRemote$69,000–$101,000 / yearYou will set yourself apart by demonstrating some or all of the following: Associate's degree in electrical or electronics from an accredited institution, current enrollment in a bachelor's degree engineering program at an accredited institution or applicable military training and experience. From mission-critical facilities to complex energy management challenges, we partner with customers as trusted advisors, delivering innovative solutions and technical expertise that safeguard operations and maximize uptime.
Senior Electronics Technician Gentherm IncSenior Electronics TechnicianNovi, MIAs a global leader in thermal management and pneumatic comfort technologies, we develop advanced systems that deliver meaningful solutions to enhance health, wellness, comfort, and efficiency in everyday life. We are committed to building an inclusive culture through Our Network of Engagement (ONE) where we value our differences and work together to positively impact the lives of our employees, customers, and communities.
Electronics Repair Technician - AV LED Nationwide VideoElectronics Repair Technician - AV LEDWixom, MIFull timeThis position performs repairs to LED modules, maintains LED spare parts inventory, tracks and prepares analytical repair data, and assists the warehouse as needed. LED repair responsibilities include but are not limited to : Soldering diodes to circuit boards, replacing and gluing masks, and waterproofing modules.
Sr Relay Technician EPSSr Relay TechnicianRiverview, MichiganFull timeElectric Power Systems (EPS) is a NETA-accredited independent electrical testing and engineering organization specializing in electrical acceptance testing, commissioning, and maintenance for clients across Data Centers, Utility, Generation, Renewables, Transit, Industrial and Commercial Facilities throughout North America. Perform installation, commissioning, testing, and function testing of substation control circuits on relay panel, transformer & circuit breaker change-outs.
Retail Field, Smart Lock Access, Network Technicians Mobile Technologies Inc.Retail Field, Smart Lock Access, Network TechniciansAuburn Hills, MI$20–$25While performing the duties of this job, the employee is required to: Regularly stand, walk, bend over, reach overhead, crouch, kneel, balance, grasp, push or pull, talk and/or hear, and drive. Responsibilities include installing/building displays, end caps, fixturing, and maintenance of those displays, planogram resets, and conducting break-fix repairs.
Electronic Technician (Transportation Public Works) Civil Service City of DallasElectronic Technician (Transportation Public Works) Civil ServiceCanton, Michigan3 Tests electronic components, circuits, and faulty equipment and applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction; performs various tests and implements various testing methods to evaluate soundness of all pumps, motors, and related equipment; performs alignment activities, general maintenance, and effective technical work to correct deficiencies or issues. The Electronic Technician performs journey level technical work involving installation, operation, repair and maintenance of a wide variety of electronic equipment for communications, traffic signal control, flood control, water pumping stations or related electrical equipment to ensure efficient operation.
Technician General - 15 MindlanceTechnician General - 15Auburn Hills, MIThe Dyno Test Technician will be responsible for test execution and dynamometer operation for hybrid & electronic vehicle power electronics products. " Knowledge base of engineering theories related to rotating electric engineering function and ability to apply those theories to a variety of complex situations.
Health Information Management Clerk/Technician HIM Vibra Healthcare LLCHealth Information Management Clerk/Technician HIMTaylor, MIOften our patients require additional critical care services for medically complex conditions such as trauma, infectious diseases, wound healing, cardiovascular disease, stroke, amputation and ventilator weaning. Vibra Hospital of SE Michigan - Taylor Campus, located in Taylor, MI is a 40 bed Critical Care Hospital providing acute care services to patients recovering from serious illnesses or injuries.
Associate Field Service Technician Toshiba Global Commerce Solutions - ExternalAssociate Field Service TechnicianHowell, MIThey are responsible to perform a full workload of product installation, support services and repair on Toshiba Global Commerce Solutions and non-TOSHIBA retail products and in the store systems, retail banking and SMB marketplaces (i.e., apparel stores, supermarkets, mass merchandising, specialty shops, banks, local insurance agents, CPAs, legal firms, etc.). Possesses basic knowledge of personal computer technology, network infrastructure, flat panel TVs & monitors, cash registers / point-of-sale equipment, and associated retail devices to include scanners, handheld devices, kiosks, printers & other related and similar retail, and SMB product technologies.
Installation Technician Detroit, MI (Wixom) BearCom, Inc.Installation Technician Detroit, MI (Wixom)Wixom, MIKEYWORDS: Motorola, Kenwood, ICOM, Avigilon, Two-Way Radio, Two Way Radio, 2-Way Radio, GPS, VOIP, WI-FI, BDA/DAS, RF, UHF, VHF, MOTOTRBO, LMR, OSHA 10, FCC GROL, L3Harris, CET, Network+, Security+, P2P, P2MP, PtMP, P25, Astro25, PPE. Must physically be able to lift 50 lbs., maneuver into and out of heavy equipment and work on ladders and other elevated locations including at times standing for extended periods, and occasionally working outside in extreme temperatures.
Full Time Night Service Technician Indian TrailsFull Time Night Service TechnicianRomulus, MIFull timeServiceTechnician/Mechanics will be classified in accordance with training and capability grades as follows: Class A Knowledge and competency in all vehicle systems, including electrical, engine, transmission, including teardown and rebuild, brakes, suspension, cooling systems, electronics, diagnostics, and HVAC systems. Class B Knowledge and competency in brakes, suspensions, and HVAC with broad scope R&R (remove and repair) of major components, including routine maintenance, electronic diagnostic, and repair capabilities.
EMC Technician Reliance OneEMC TechnicianPlymouth, MichiganWork directly with EMC/EMI test equipment like EMI receivers, spectrum analyzers, network analyzers, LISNs, and antennas. If you’re experienced with electronics and EMC testing, this is a hands-on role where you’ll get to work with cutting-edge test equipment in a dynamic automotive environment.
Audio Visual Equipment - Quality Control Technician Nationwide VideoAudio Visual Equipment - Quality Control TechnicianWixom, MIFull timeQuality Control: Conduct quality control testing on all equipment in existing and new products in accordance with the “QC Handbook”, which governs procedures, specifications, safe practices, troubleshooting, testing times, etc. for equipment owned by Nationwide in the predetermined amount of time given for each item. Warehouse Support: Support all warehouse functions including: palletizing, de-palletizing, in-bound/outbound order verification, shipping/receiving duties (including lift truck and box operation), etc.
Panel Build Technician Lincoln Electric Holdings IncPanel Build TechnicianPlymouth, MIThis includes interpreting electrical schematics, wiring diagrams, and bills of materials; mounting and connecting components; and ensuring panels meet quality, safety, and performance specifications. Lincoln Electric's innovative solutions enable higher quality and productivity across a variety of processes including welding, cutting, brazing, machining, process automation, and field repair.
NewEngineering Technician III Power Solutions InternationalEngineering Technician IIIWaterford, MI$25–$30 / hourUnder the direction of the Business Unit Manager the Engineering Technician III - Electronics, provides support for the implementation of electrical components for base engines, prototypes and finished good products released by engineering through the Engineering Change Order (ECO) process. Power Solutions International (PSI) is a leading manufacturer of emissions-certified powertrains specializing in customized and fully integrated turnkey solutions for the leading global equipment manufacturers in the industrial, transportation, and energy markets manufacturers.
Instrumentation Calibration Technician AmentumInstrumentation Calibration TechnicianAllen Park, MichiganOur experience encompasses virtually every type of automotive test facility, including climatic and driveability wind tunnels; aerodynamic, acoustic, and thermodynamic wind tunnels; emissions test rooms; soak rooms; altitude chambers; engine and powertrain test cells; and electromagnetic anechoic chambers. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
Engineering Technician III Power Solutions International, Inc.Engineering Technician IIIWaterford, MI$25–$30 / hourSummary: Under the direction of the Business Unit Manager the Engineering Technician III - Electronics, provides support for the implementation of electrical components for base engines, prototypes and finished good products released by engineering through the Engineering Change Order (ECO) process. Power Solutions International (PSI) is a leading manufacturer of emissions-certified powertrains specializing in customized and fully integrated turnkey solutions for the leading global equipment manufacturers in the industrial, transportation, and energy markets manufacturers.
THCE Biomedical Equipment Technician II Trinity HealthTHCE Biomedical Equipment Technician IIAnn Arbor, MIMust be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. BioMed, BMET, CBET,Bio-Med, CE, Clinical Engineer, BioMedical Technician, HTM, Healthcare Technology Management, BioMedical Equipment Technician, CLES.
Dyno Test Technician LanceSoft IncDyno Test TechnicianAuburn Hills, MI$30–$36 / hourThe Dyno Test Technician will be responsible for test execution and dynamometer operation for hybrid & electronic vehicle power electronics products. • Knowledge base of engineering theories related to rotating electric engineering function and ability to apply those theories to a variety of complex situations.
Network Technician (Central Office Technician) Frontier Communications Parent IncNetwork Technician (Central Office Technician)Brooklyn, MI$22.50–$40.06 / hourInstall, maintain and repair Central office Equipment that provides Voice Data, ISDN Circuits, XDSL, Video, VoIP and Data Networking. Work with field technicians to test and resolve customer problems, provide information to complete jobs, work orders and service orders, coordinate with assignments as needed.
Tire and Lube Technician (40366) HertzTire and Lube Technician (40366)Detroit, Michigan$17.50Take advantage of Hertz negotiated discounts (Travel, Tickets- movies, concerts, theme parks, Electronics, Food, Fitness). Ability to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools.
Tire and Lube Technician HertzTire and Lube TechnicianDetroit, Michigan$17.50About Us The Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company.
Certified Automotive Technician HertzCertified Automotive TechnicianDetroit, Michigan$23The Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company.
Certified Automotive Technician (40365) HertzCertified Automotive Technician (40365)Detroit, Michigan$23About Us The Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company.
NewMechanical Technician PEAK Technical Services Inc.Mechanical TechnicianRomulus, MI$22 / hourRomulus, Michigan, is a vibrant city known for its community spirit and strategic location near major transportation hubs, offering a dynamic work environment with access to various amenities. Must be able to perform the essential physical functions of the position, including sitting, standing, walking, stooping, kneeling, and lifting up to 25 pounds, with or without reasonable accommodation.
Quality Technician ZobilityQuality TechnicianAuburn Hills MI, MIAccountable for day-to-day floor quality support of operations and quality management including: Cross functional collaborating with production, and departments to lead quality support in manufacturing/assembly. Record inspection results with use of hand gauges, electronic based scanning and optical systems to verify product conformity.
Mechanical Technician PEAK Technical StaffingMechanical TechnicianRomulus, MI$22 / hourMust be able to perform the essential physical functions of the position, including sitting, standing, walking, stooping, kneeling, andlifting upto 25 pounds, with or without reasonable accommodation. Romulus, Michigan, is a vibrant city known for its community spirit and strategic location near major transportation hubs, offering a dynamic work environment with access to various amenities.
Biomedical Technician II Trimedx Holdings LLCBiomedical Technician IIMIAccordingly, Associates are prohibited from engaging in the unlawful manufacture, sale, distribution, dispensation, possession, or use of any controlled substance or marijuana, or otherwise being under the influence thereof, on all TRIMEDX and Customer property or during working/on-call hours. Performs Incoming Inspections (II) to maintain a complete and accurate inventory of medical devices, including trial and evaluation, rental, and loaner equipment in addition to permanently assigned equipment inventory.
Technician (Mechanic) Front Street ShipyardTechnician (Mechanic)MIAs a fast-growing company, SHM cultivates a team dynamic of passionate individuals led by the sharpest minds in the industry in order to serve the vibrant boating community that encompasses the SHM network. Troubleshoot, repair, and install vessel systems and components including but not limited to: electrical, electronics, HVAC, plumbing & water systems (fresh, salt, and waste), gas and diesel engines.
Engineering Technician KLA CorpEngineering TechnicianAnn Arbor, MI$26.98–$45.87 / hourEnabling the movement towards advanced chip design, KLA''s Global Products Group (GPG), which is responsible for creating all of KLA's metrology and inspection products, is looking for the best and the brightest research scientist, software engineers, application development engineers, and senior product technology process engineers. Our team builds and develops sophisticated electromechanical assemblies that power high-performance computing (HPC) infrastructure for KLA products, enabling innovative image data processing.
Breadboard Technician Actalent IncBreadboard TechnicianAllen Park, MI$25–$28 / hourYou will work hands-on with automotive ECUs, wiring harnesses, sensors, displays, and gateways, using tools such as multimeters, oscilloscopes, breakout boxes, and automotive network diagnostic software (including Vector CANoe and CANalyzer). This role focuses on integrating physical hardware such as ECUs, wiring, gateways, displays, and sensors to support software validation and ensure reliable operation of automotive electrical systems in a fast-paced lab environment.
Associate Field Service Technician ExternalAssociate Field Service TechnicianBrighton, MichiganThey are responsible to perform a full workload of product installation, support services and repair on Toshiba Global Commerce Solutions and non-TOSHIBA retail products and in the store systems, retail banking and SMB marketplaces (i.e., apparel stores, supermarkets, mass merchandising, specialty shops, banks, local insurance agents, CPAs, legal firms, etc.). Possesses basic knowledge of personal computer technology, network infrastructure, flat panel TVs & monitors, cash registers / point-of-sale equipment, and associated retail devices to include scanners, handheld devices, kiosks, printers & other related and similar retail, and SMB product technologies.
NewTools Technician Magna International, IncTools TechnicianSouthfield, MichiganWe are a premier supplier for the global automotive industry with full capabilities in design, development, testing and manufacturing of complex Electronic systems. This role involves performing mechanical assembly, cable testing, PCB rework, and utilizing tools such as.
Technician, Controls Magna International, IncTechnician, ControlsAnn Arbor, MichiganEnsures proper controls-specific documentation delivery from the Original Equipment Manufacturer(s) and maintains documents (e.g., electrical, hydraulic and pneumatic schematics, panel layouts, PLC, operator display, operator interface, robot programs, and machine power distribution) throughout equipment life cycle; and documents any changes during that time. Plans the updates, modifications, and continuous improvement of existing controls systems including robotic programs, ladder logic programs, relay logic, electrical distribution, motor controls, operator interface, hydraulics, and pneumatics distribution and control.
Instrumentation & Calibration Technician Williams InternationalInstrumentation & Calibration TechnicianPontiac, MIWilliams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. Experienced in calibrating several disciplines of test and measurement equipment including but not limited to: torque, load/force, strain, vibration, pressure, vacuum, temperature, weight, mass, AC/DC current/voltage.
Fiber Technician - Pontiac, MI MetronetFiber Technician - Pontiac, MIPontiac, MIAs a Fiber Technician you will be responsible for performing basic to advanced installations, disconnects and service changes for residential and business customers for high-speed internet services, phone, and TV. We're in it to win it, and a key part of our strategy is to strengthen our business-to-business technology sales team with talented and hard-working individuals who aspire to be the next generation of technology leaders.
ECAD Librarian (PCB / ECAD Technician) KLAECAD Librarian (PCB / ECAD Technician)Ann Arbor, MichiganResearch and Development: ECAD Librarians are responsible for researching new components and technologies, integrating them into the library, and ensuring that the library remains current and relevant to the design needs. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world’s leading technology providers to accelerate the delivery of tomorrow’s electronic devices.
Appliance Service Technician Heydlauff's Appliance, Inc.Appliance Service TechnicianChelsea, MIProvide exceptional customer service by addressing client concerns, explaining repairs, and offering advice on appliance care and maintenance. As an Appliance Service Technician, you are a key member of the team responsible for the quality and efficient installation, maintenance, and repair of appliances and other equipment.