Electronics Technician U.S. NavyElectronics TechnicianPorterdale, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Aviation Electronics Technician U.S. NavyAviation Electronics TechnicianHapeville, GAWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianZebulon, GAWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewFacility Maintenance Technician 3PL Ryder SystemFacility Maintenance Technician 3PLConyers, GA$73,000Experience and proficiency in the following areas: Automated conveyors systems and controls, Electrical and electronic principles, Blueprint and electrical schematic reading, Knowledge of CMMS programs, Preventative maintenance procedures, Industrial electrical, Industrial controls, Industrial Electronics, Industrial PC literacy, Knowledge of N.E.C. Able to manage, lead, and influence others on the team. Install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, photo eyes, motor starters, relays, limit switches, timers, solenoids, Servo drives, frequency inverters, linear drives, tachs, and encoders.
Advanced Electronics U.S. NavyAdvanced ElectronicsFairburn, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Computer Field Technician U.S. NavyComputer Field TechnicianSmyrna, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
NewEquipment Maintenance Technician III - Second Shift - Sign on Bonus JABIL CIRCUIT, INCEquipment Maintenance Technician III - Second Shift - Sign on BonusAtlanta, GAPerforms routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints. In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery.
Explosive Ordnance Disposal Technician U.S. NavyExplosive Ordnance Disposal TechnicianSocial Circle, GAKey Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. Job Title: Bomb Technician (EOD) Category / Component: Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide.
Bomb Technician U.S. NavyBomb TechnicianMorrow, GAKey Responsibilities Detonate and demolish hazardous munitions, pyrotechnics, and outdated explosives; neutralize ordnance including sea mines, torpedoes, depth charges, and improvised explosive devices; remotely disable unsafe ordnance using robotic and diagnostic technology; conduct parachute and helicopter insertion operations; clear waterways of mines in support of ships and submarines; provide explosive ordnance support to law enforcement agencies and organizations such as the United States Secret Service and Department of State. Job Title: Bomb Technician (EOD) Category / Component: Enlisted • Active Overview Explosive Ordnance Disposal Technicians locate, identify, render safe, and dispose of explosive threats on land, at sea, and underwater, using advanced robotics, diving, and explosives skills to protect forces and civilians and support fleet and joint operations worldwide.
Fire Controlman U.S. NavyFire ControlmanZebulon, GAWhat to Expect Hands on technical work that blends classroom, computer based training, and intensive lab practice; frequent troubleshooting under time pressure to restore mission critical combat systems and communications; strict adherence to safety procedures, configuration control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts to support around the clock operations; progressive responsibility as you qualify on systems, earn Navy Enlisted Classifications, and advance in rate. Enlist under the Advanced Electronics and Computer Field program, with final placement into the Electronics Technician or Fire Controlman rating during initial training at Great Lakes, based on performance and Navy needs; maintain AECF eligibility throughout training in order to retain any accelerated advancement benefits; fleet conversion into ET or FC from another rating may be possible for qualified Sailors, subject to screening and community manning.
Aviation Electrician’s Mate U.S. NavyAviation Electrician’s MateUnion City, GAWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
SCA-Electronic Security System (ESS) Electronics Technician Parsons CorpSCA-Electronic Security System (ESS) Electronics TechnicianGAJob Description: We're currently seeking an SCA-Electronics Technician to perform Installation on physical access control systems (PACS) and Intrusion Detection Systems (IDS) including access keypads, card readers, sensors, control panels, application server configuration, and low-voltage wiring on the Ft Gordon military installation. RESPONSIBILITIES: Performs nonroutine and occasionally heavy labor tasks related to onsite physical access control systems (PACS) and intrusion detection systems (IDS) including access keypads, card readers, sensors, control panels, application server configuration, and low-voltage wiring.
Electronics Technician 3 - Atlanta, GA M.C. Dean IncElectronics Technician 3 - Atlanta, GAAtlanta, GAAs part of (SES) Strategic Business Unit, you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems.
Automation Electronics Technician AmcorAutomation Electronics TechnicianGriffin, GAWorks with staff and contractors as needed to improve efficiencies, reduce downtime, upgrades/automated equipment, and troubleshoots a wide range of equipment and specializing in robotic application by performing the following duties which includes but limited to: Essential Functions : . Working knowledge of PLCs (modern Studio 5000 and legacy RsLogix 500 Allen Bradley SLC PLCs, Siemens), FANUC Robots, Cognex Vision Systems, VFDs, & HMI programming.
Automation Electronics Technician Amcor PlcAutomation Electronics TechnicianGriffin, GAWhen you join Amcor, you will have access to a comprehensive benefits and compensation package that includes: Medical, dental and vision plans Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location Company-paid holidays starting at 8 days per year and may vary by location Wellbeing programs & Employee Assistance Program Health Savings Account/Flexible Spending Account Life insurance, AD&D, short-term & long-term disability, and voluntary benefits Paid Parental Leave Retirement Savings Plan with company match Tuition Reimbursement (dependent upon approval) Discretionary bonus program (initial eligibility dependent upon hire date). Good verbal, written, and interpersonal communication skills are essential Advanced understanding of safety and e-stop systems Advanced troubleshooting of electrical components such as, but not limited to PLC's, AC & DC drives, relay logic, single loop controllers, pneumatics & hydraulics, robots and vision systems.
NewElectronics Technician Senior Acuity BrandsElectronics Technician SeniorAtlanta, GALogistics & Training: Manage component purchasing, maintain inventory, and transfer knowledge to production operators/technicians during NPI or software rollouts. Documentation & Calibration: Update technical documentation (electrical schematics, parts lists) and document annual validation/calibration methods.
Electrical Technician, Power Electronics Endeavour. Inspired Infrastructure.Electrical Technician, Power ElectronicsAtlanta, GeorgiaOur teams work extremely hard because we believe in Endeavour’s mission: to guarantee clean water and renewable energy to everyone, everywhere by decentralizing infrastructure, developing new technologies, & deploying energy, water, and waste treatment solutions that are more profitable than those that currently exist. The right person is trustworthy with confidential information, highly organized, self-motivated, has excellent communication skills, can think strategically, and works equally as well independently as with a team.
Electronics Installation Technician - 100 Percent Travel Parsons CorpElectronics Installation Technician - 100 Percent TravelGA$15.68–$71.30 / hourCandidate must have extensive experience with above and below ground electrical installations, duct banks, manholes, steel racks, towers and poles, surveying, concrete work, excavation equipment operations, and airfield systems. What You'll Be Doing: This position works as part of a construction and installation crew installing new or upgrading existing equipment and systems such as navigational aids, air traffic communications systems, and weather monitoring equipment.
Electronics Tech - Fiber Optics/Radio Control System Parsons CorpElectronics Tech - Fiber Optics/Radio Control SystemGA$15.68–$71.30 / hourTest and troubleshoot electrical components by applying the theory of operation of transistors, solid state components, integrated circuits, motors, servos, power transmissions, and other electrical devices utilizing electrical schematics, wiring diagrams, blueprints, color codes, publications, and other technical data. In this role you will get to perform such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.
Electronics Technician Delta Air Lines IncElectronics TechnicianAtlanta, GAMust pass Avionics Evaluation Test administered by Avionics management that measures the ability to read electronic schematics, identify electronic components, discuss electronic circuit operation, and operate analog and digital meters. • Performs maintenance, including but not limited to, inspection, test, and repair of aircraft avionics/electronic components in an avionics bench repair environment in accordance with Delta-approved manuals and methods.
SCA - Telecommunications Installation Technician, FAA Parsons CorpSCA - Telecommunications Installation Technician, FAAGA$15.68–$71.30 / hourThe statement of work includes a variety of activities that support the FAA's Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
SCA - Communication Systems Technician, FAA Parsons CorpSCA - Communication Systems Technician, FAAGA$15.68–$71.30 / hourThe statement of work includes a variety of activities that support the FAA's Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
SCA - Data Systems Technician, FAA Parsons CorpSCA - Data Systems Technician, FAAGA$15.68–$71.30 / hourThe statement of work includes a variety of activities that support the FAA's Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
NewCommercial Installation Technician II Allied UniversalCommercial Installation Technician IIAtlanta, GAMust possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a company issued vehicle. RESPONSIBILITIES: Install, program and configure electronic security systems for commercial clients, including, door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, and other security systems.
Electronic Technician Borr Drilling LtdElectronic TechnicianCovington, GAResponsible for performing diagnostic tests, and troubleshooting system faults and failures, of electronic equipment onboard the rig, including but not limited to: helideck, navigation, marine systems and radio comms systems, emergency alarm systems, communication and IT equipment, PLC and VFD systems, Drilling Automation systems, Fire & Gas systems, Mud and Bulk management / monitoring systems. Execute and update the rig's Computerized Maintenance Management System (CMMS), maintenance and rig documentation records to ensure all actions are carried out and completed in a timely manner and in accordance with Borr Drilling policies and procedures to minimize potential downtime for electronic-electrical maintenance activities.
HFC Atlanta - Electronic Controls Technician 1st shift Hormel Foods CorpHFC Atlanta - Electronic Controls Technician 1st shiftTucker, GAThe Company is a member of the S&P 500 Index and the S&P 500 Dividend Aristocrats, was named one of the best companies to work for by U.S. News & World Report and one of America's most responsible companies by Newsweek, was recognized by TIME magazine as one of the World's Best Companies and has received numerous other awards and accolades for its corporate responsibility and community service efforts. Its brands include PLANTERS, SKIPPY, SPAM, HORMEL NATURAL CHOICE, APPLEGATE, WHOLLY, HORMEL BLACK LABEL, COLUMBUS, JENNIE-O and more than 30 other beloved brands.
Field Technician Adex CorporationField TechnicianAtlanta, GAEXPERIENCE and QUALIFICATIONS: " Vocational Skills and procedural knowledge, typically gained through a combination of education and relevant experience totaling up to 2 years post-high school or equivalent. Interpret the alarm conditions on the network to proactively identify and implement repairs and restoration plans to ensure minimal service disruption and impact to customer.
Skillbridge Fellowship - Industrial Maintenance Technician Tyson Foods IncSkillbridge Fellowship - Industrial Maintenance TechnicianGARelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). Tyson Foods proudly supports the Department of Defense SkillBridge program and invites transitioning service members to join our team as an Equipment Maintenance Fellow.
Field Service Technician - Atlanta, GA Entrust CorpField Service Technician - Atlanta, GAAtlanta, GA$22.68–$35.65 / hourWork with a high degree of autonomy with the ability to test, diagnose and resolve issues on systems that may include: Mechanical embossers, thermal image application and laminating, magstripe and chip data writing, ultraviolet curing. Responsibilities: Electromechanical Emergency and Preventative Maintenance: Perform high quality preventative and emergency maintenance services on Entrust equipment.
Electronic Security Systems Technician III Parsons CorpElectronic Security Systems Technician IIIGAJob Description: Parsons is looking for amazingly talented ESS Technicians to perform on-demand services, inventory tracking, streamlined projects, and preventive maintenance on ESS equipment including Physical Access Control Systems (PACS), Video Surveillance Systems (VSS), Intrusion Detection Systems (IDS) Intercoms, infrastructure, cabling, door hardware, power, security consoles, life safety devices, detention locks/controllers, and turnstiles at approximately 220 court and USMS facilities in the Southern region United States Marshals Service (USMS), which includes multiple districts across the Southern US. Performs nonroutine and occasionally heavy labor tasks related to onsite physical access control systems (PACS), Video Surveillance Systems (VSS), Intrusion Detection Systems (IDS) Intercoms, infrastructure, cabling, door hardware, power, security consoles, life safety devices, detention locks/controllers, and turnstiles.
Avionics Technician Careers in AviationAvionics TechnicianAtlanta, GeorgiaWith 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries.
Instrumentation Technician ZoetisInstrumentation TechnicianAtlanta, GeorgiaTwo + years of assignment-related maintenance/equipment experience or an equivalent combination of education and/or experience sufficient to successfully perform the essential duties of the job as listed in the essential functions or experience in at least 1 operational functions and intermediate knowledge in at least 2 operational functions. Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property.
Electrical/Mechanical Maintenance Technician - First Shift Greif Packaging LLCElectrical/Mechanical Maintenance Technician - First ShiftAustell, GAFull timeUtilize tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Ability to make precise coordinated movements of the fingers of one or both hands to grasp, manipulate or repair small parts, wiring, electrical, etc from various types of machinery or devices.
SCA - Automation Systems Technician, FAA Parsons CorpSCA - Automation Systems Technician, FAAGA$15.68–$71.30 / hourThe statement of work includes a variety of activities that support the FAA's Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety. Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
Cell Phone Technician Front of House DOUGLAS-PAULDING SERVICES LLCCell Phone Technician Front of HouseMcdonough, GA$13–$15 / hourBASIC QUALIFICATIONS- Outstanding customer service skills- Excellent technical, problem solving, and analytical skills- Exceptional organizational skills- Strong written and oral communication skills- Proficient in Microsoft Office- Work well in team environment- Ability to work flexible hours, including weekends and holidays- High school diploma or GED. PREFERRED QUALIFICATIONS- A+ Certification- Apple Certified Macintosh Technician (ACMT)- Experience repairing electronics, smartphones, PC/MACs, and game consoles- Technical degree or certification in Electronics or Consumer Electronics- Previous experience working at retail electronics store.
Cell Phone Technician DOUGLAS-PAULDING SERVICES LLCCell Phone TechnicianPeachtree City, GA$15–$20 / hourBASIC QUALIFICATIONS- Outstanding customer service skills- Excellent technical, problem solving, and analytical skills- Exceptional organizational skills- Strong written and oral communication skills- Proficient in Microsoft Office- Work well in team environment- Ability to work flexible hours, including weekends and holidays- High school diploma or GED. PREFERRED QUALIFICATIONS- A+ Certification- Apple Certified Macintosh Technician (ACMT)- Experience repairing electronics, smartphones, PC/MACs, and game consoles- Technical degree or certification in Electronics or Consumer Electronics- Previous experience working at retail electronics store.
Electronic Game Support / Maintenance Technician PuttshackElectronic Game Support / Maintenance TechnicianAtlanta, GeorgiaThrough various troubleshooting and repair techniques as well as timely and accurate reporting, the Game Technician will work closely with the venue team to resolve technical issues promptly and efficiently, contributing to a positive and engaging atmosphere and guest experience on the course. Physical demands-necessary ability to move and lift 10-50lbs, navigate stairs and dimly lit areas, remain on feet for an entire shift throughout all venue areas including kitchen, stairs, etc.
Field Technician Dashiell CorporationField TechnicianAtlanta, GAThe selected candidate will be placed at the Field Service Technician I, Field Service Technician II, Field Service Technician III, or Senior Field Service Technician level based on experience, qualifications, and demonstrated technical capability at the time of hire — offering a clear path for professionals at multiple points in their field services career to contribute and grow with our team. To be considered, candidates must meet the following minimum qualifications (Field Service Technician I): Associate’s or Bachelor’s degree in Electrical Engineering Technology, Electronics Technology, or a related technical field; equivalent field experience may be considered in lieu of a degree (2 years for Associate’s, 4 years for Bachelor’s).
Lead Technician Security 101 Holdings LLCLead TechnicianAtlanta, GA$25–$38 / hourSecurity 101 - Atlanta is now recruiting a Lead Commercial Security Technician that has experience installing programming and servicing commercial electronic security devices primarily IP network systems and overall security systems. Skills/Abilities: Must have a minimum of 5 years' experience installing, servicing, and programming commercial access control, IP-based video systems and intrusion alarm systems.
Instrumentation Technician Zoetis IncInstrumentation TechnicianAtlanta, GAExperience: Two + years of assignment-related maintenance/equipment experience or an equivalent combination of education and/or experience sufficient to successfully perform the essential duties of the job as listed in the essential functions or experience in at least 1 operational functions and intermediate knowledge in at least 2 operational functions. Physical Requirements: While performing the duties of this job, the employee is required to stand; walk; reach, stretch hands and arms; stoop, kneel, crouch, or crawl, push & pull objects, rotating and repetitive movements, climb stairs and must be able to see, talk or hear.
Process Controls Technician 1st, 2nd, 3rd shift (3 Openings) Quality Custom Distribution ServicesProcess Controls Technician 1st, 2nd, 3rd shift (3 Openings)Conyers, GAJOB SUMMARY: The Process Controls Technician supports production, maintenance, and engineering to ensure safe/efficient/cost effective processes for the Liquid Products manufacturing, packaging, and sanitation operations. Golden State Foods is a distinguished leader in the food service industry, offering an extensive array of products and services to a diverse clientele.
Service Technician Patterson Companies IncService TechnicianGA$19.23–$25 / hourWe value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization. Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information".
Access Control Technician Perimeter Solutions GroupAccess Control TechnicianMcDonough, Georgia$23–$32 / hourFull timeIf you have experience installing or servicing access control systems, gate automation, low-voltage wiring, security systems, or electronic controls , this is an excellent opportunity to build your career with a company that continues to grow throughout the Southeast. Our team completes more than 1,000 commercial installations annually , serving government agencies, schools, military facilities, industrial operations, commercial businesses, and renewable energy clients.
COMMUNICATION TECHNICIAN - INFORMATION TECHNOLOGY Clayton CountyCOMMUNICATION TECHNICIAN - INFORMATION TECHNOLOGYGAAssociate degree in Electronics preferred; supplemented by two (2) years previous experience involving installation, repair, and maintenance of communications electronics, to a component level; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Installs, repairs, and maintains two-way radio equipment (mobile, portable, and field/base units), emergency vehicle warning equipment, mobile video recording equipment, multimedia cabling and termination, radio programming (with personal computer), and various electronic devices.
Biomedical Technician I - Atlanta, GA GE HealthCare Technologies IncBiomedical Technician I - Atlanta, GAAtlanta, GAAssociate degree, Bachelors degree, military education, participant in the formal GEHC Biomed/FE Services Internship or Military Externship program; OR High School Diploma/GED with 2+ years of experience servicing electrical, electronics, IT or mechanical equipment. Evaluate customer biomedical equipment issues, implement appropriate repairs, and perform planned maintenance and safety/environmental inspections to support our customers ability to deliver healthcare.
Technician, Teleport Operations SES SATechnician, Teleport OperationsEllenwood, GAYou will monitor the conditions of Telemetry, Tracking and Command, commercial services and terrestrial facilities, including the status of system alarms, station plant and facility subsystems while working with state-of-the-art monitoring systems and test equipment. It would be nice if you had: General understanding of antenna drive-systems, high power amplifiers, Up/Down converters, fiber optic sub-systems, baseband equipment consisting of modems, multiplexers, broadband, IP technologies and video technologies/systems.
NewEngineering Technician AbsolicsEngineering TechnicianCovington, GA$26–$34 / hourBasic knowledge of manufacturing processAble to cope with pressure and be a team playerAble to work irregular or extended hours, including weekends and nights as neededAble to lift 50 pounds without restrictionAble to stand and be on feet for up to 12 hoursMust be a safety and quality conscious personGoal and customer-oriented individualMust have the ability to work with small quantities of chemicals and in a wet lab environment (applicable to specific job function)Skilled as a trainer/mentor/coach with focus on individual and team growthPlumbing knowledge to address leaks, clogs or other drainage problemsElectrical wiring capabilities to manage problems with the equipment's electricityAbility to handle basic repairs around the equipment. Required QualificationsTwo years of college or technical school (preferred, but not required)More than one year of experience in Semiconductor field (preferred, but not required)Experience in maintaining and setting up semiconductor manufacturing equipment.
Senior Field Technician Pyramid, IncSenior Field TechnicianAtlanta, GAFull timeResponsible for the installation, monitoring, testing, maintenance, repair and removal of telecommunications and associated electronic equipment, including CPE and wiring per specifications and operational procedures, both in technical facilities as well as on customer property. Assembles, installs, and/or tests transmission equipment channel banks, channel service units (CSU), digital service units (DSU), modems, routers, etc.
Field Service/Installation Technician Benco DentalField Service/Installation TechnicianAtlanta, GAWe provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930—a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states.
Wastewater Plant - Maintenance Technician Veolia Environnement SAWastewater Plant - Maintenance TechnicianCollege Park, GAPrimary Duties /Responsibilities: Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters and belt presses. Position Purpose: Performs maintenance services, installation or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting or vehicle servicing.