Avionics/Aerospace Engineering Support, Principal F-16 WAM (Top-Secret) - 193 CredenceAvionics/Aerospace Engineering Support, Principal F-16 WAM (Top-Secret) - 193WPAFB, OHShall assist to interface with all levels of engineering, program management, and leadership, including, but not limited to, other engineers, lead and chief engineers, technical experts, PMs, and civilian and military leadership within the F-16 Division/Fighters Directorate, other AFLCMC directorates, AFLCMC headquarters, AFRL, HQ AFMC, ACC, DoD, prime and subcontractors, and other government and private sector personnel. Credence has an immediate opening for an Avionics/Aerospace Engineering Support at the principal level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at WPAFB, OH.
NewPosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret) CredencePosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHSupport engineering and technical requirements derivation, design, development, integration, verification, qualification for airworthiness certification, and fielding of F-16 PNT systems, including Inertial Navigation Systems (INS), transponders, Global Positioning System (GPS), and other forms of alternate PNT as defined in, or derived from, program requirements. Credence has an immediate opening for an Position, Navigation, and Timing (PNT) Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH.
Avionics Hardware Engineering Support F-16 WAM (Top-Secret) CredenceAvionics Hardware Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHCredence has an immediate opening for an Avionics Hardware Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH. Support next-generation mission computer procurement and integration, including recommending best practices for implementing new software and hardware solutions and applying a thorough understanding of industry computer, firmware, memory, CPU, GPU, and middleware solutions.
Avionics Software Engineering Support F-16 WAM (Top-Secret) CredenceAvionics Software Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHCredence has an immediate opening for an Avionics Software Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH. For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an Accreditation Board for Engineering and Technology (ABET) accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering.
NewEngineering Technician Co-Op ALLIENT INCEngineering Technician Co-OpDayton, OHThe Engineering Technician Co-Op works on assignments to support the organization’s need to design, validate, and release new products and/or product improvements. • Must be an actively enrolled student having completed 2 years of education in a 4-year minimum technical program at an accredited institution.
NewProject Manager - Civil Engineering BURKHARDT ENGINEERING COMPANYProject Manager - Civil EngineeringDayton, OHBurkhardt Engineering Company, founded in 1999, provides land surveying, civil engineering and site development design services to owners, operators, real estate professionals, architects and developers stretching across various sectors including: commercial, mixed use, healthcare, national retail, residential, educational, civic, municipal, and industrial markets. Project Team Leaders are responsible for leading a team of civil engineers, designers, and other technical staff to successfully plan, execute, and deliver high-quality projects while ensuring client satisfaction and project success.
NewEngineering Drafter Elite Recruiting CoEngineering DrafterFairborn, OHThe Drafter II is a mid-level position responsible for creating accurate 2D drawings and 3D CAD models from existing physical components, assemblies, or legacy drawings supporting aerospace and defense programs. Create and modify detailed 2D engineering drawings and 3D CAD models using CAD software (e.g., SolidWorks, AutoCAD, Inventor, Creo, or Siemens NX).
NewEngineering Technician ActalentEngineering TechnicianVandalia, OH$30–$33 / hourThe role involves regular interaction with production equipment and utilities, including biosafety cabinets, incubators, peristaltic pumps, bar sealers, autoclaves, automated parts washers, clean steam generators, purified water systems, facility utilities, and label printers. Hands-on experience troubleshooting, diagnosing, or qualifying equipment such as biosafety cabinets, incubators, peristaltic pumps, bar sealers, autoclaves, automated parts washers, clean steam generators, purified water systems, facility utilities, and label printers.
Maintenance and Engineering Manager VantageMaintenance and Engineering ManagerEnglewood, OhioUnderpinned by our broad portfolio of formulations, ingredients and actives that are built on a backbone of sustainable oils, fats and their derivatives, Vantage targets selected markets and applications including personal care, food, surface treatment, agriculture, pharma, and consumer and industrial performance. This position manages a team of maintenance technicians, project engineers, production engineers, and CI engineers, and drives the execution of maintenance strategies, capital projects, and continuous improvement initiatives.
Engineering Technician II (OH) Johnson Service GroupEngineering Technician II (OH)Vandalia, OHThe Engineering Technician II will take on more complex tasks in the construction, troubleshooting, calibration, and maintenance of electronic, mechanical, electromechanical, and optical equipment. This role involves working more independently and assisting in the training of entry-level technicians.
Engineering Manager (ASME) RightWorksEngineering Manager (ASME)Middletown, OhioThis is a high-impact leadership role responsible for driving engineering performance, mentoring teams, and partnering cross-functionally to deliver innovative, high-quality equipment solutions. We are seeking a Senior Engineering Manager to lead design, product development, and continuous improvement efforts for complex industrial / capital equipment systems used in food, beverage, and pharmaceutical applications.
Product Engineering Manager - Switchboard AccelevationProduct Engineering Manager - SwitchboardMiamisburg, OhioYour leadership will ensure our products meet the reliability, scalability, and efficiency demands of modern data center environments while advancing innovation across the portfolio. As Product Engineering Manager, you will own the end-to-end development of our UL 891–compliant low-voltage switchboard product line.
NewEngineering Operation Technician Amazon.com IncEngineering Operation TechnicianJeffersonville, OHThey will maintain, operate, and troubleshoot, Data Center Operation's Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems.
NewEngineering Operation Technician, DCC Communities Amazon.com IncEngineering Operation Technician, DCC CommunitiesJeffersonville, OHThey will maintain, operate, and troubleshoot, Data Center Operation's Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, as well as three phase electrical systems such as: switch gear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. They will maintain, operate, and troubleshoot mission-critical data center facility equipment including stand-by diesel generators and related fuel systems, 3 phase electrical systems such as switchgear, UPS units, PDUs, and wet cell batteries and associated systems.
Senior Manager, Engineering Jbt Marel CorporationSenior Manager, EngineeringMiddletown, Ohio$130,000–$175,000 / yearThis position plans, organizes and directs engineering to meet objectives for design, new product development and improvement of existing product lines of High Pressure (HPP) machinery for the Food, Beverage and Pharma industry. Our purpose is to transform the future of food; this guides our vision of being the global leader in food and beverage technology, by harnessing the full power of JBT Marel to partner with our customers and pioneer sustainable innovation.
NewAsab Ess: Engineering Technician (Secret Clearance) KBRAsab Ess: Engineering Technician (Secret Clearance)Dayton, OHThis role provides technical support across planning, project execution, GIS, and documentation activities to ensure facilities and infrastructure data remains accurate, compliant, and mission-ready. In addition to Engineering Support Services at Prince Sultan Air Base, KBR also provides food services and other quality-of-life support to sustain base operations.
Solar Engineering Manager Charlie Mike RecruitingSolar Engineering ManagerDayton, OhioAct as liaison with Project Management on matters relating to engineering progress, quality, scope issues on projects as well as interface with customers on technical questions/concerns. Charlie Mike has partnered with a national leader offering comprehensive energy solutions (Solar, CHP, Battery, Storage) to commercial and industrial clients across the country.
Process Engineering Technician - PLC & Controls JOHNSON ELECTRIC HOLDINGS LIMITEDProcess Engineering Technician - PLC & ControlsVandalia, OHWe are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. Support continuous improvement initiatives aimed at reducing waste, improving automation reliability, and simplifying processes.
Composite Materials & Process Engineering Technician Joby AviationComposite Materials & Process Engineering TechnicianDayton, Ohio$35–$42 / hourFull timeResponsibilities: Develop and optimize composite manufacturing processes for propeller blade fabrication, including dry fiber layup, resin transfer molding (RTM), vacuum bagging, curing, demolding, and post-cure operations. The ideal candidate is a highly skilled engineering technician who thrives at the intersection of fabrication and process development, bridging the gap between engineering and manufacturing, and possesses the ability to work with minimal supervision within a small, focused team.
Group Manager Civil Engineering (Kettering, OH) KBJWGroup Manager Civil Engineering (Kettering, OH)Dayton, OHFull timeReviewing project requirements, RFP's and proposalsManage multiple projects at different stages of developmentJob Qualifications:BS Civil Engineering or equivalent experienceProfessional Engineers license8+ years of design experience related to site development4+ years management of technical staffExperience in business development and client interactionThe ability to work collaboratively with other team members and clientsDemonstrate strong organizational, communication and computer skillsComprehensive Knowledge of Autodesk Civil 3D requiredWork requirements:May require the ability to sit for long periods of time, stand, walk, and manipulate (carry, lift, move) light to medium weights of 10-30 pounds. Job Responsibilities:Effectively communicate with clients, contractors, and jurisdictional authorities throughout the duration of all projectsReports to Service Sector Leader and collaborates with other Group Managers and Directors in all Service SectorsManage and assure the technical quality and compliance with budgets and schedules of his/her own work products and the work produced by assigned technical resources.