NewFacilities & Maintenance Technician Micro Tech Staffing GroupFacilities & Maintenance TechnicianNorfolk, MAThe Maintenance Technician is responsible for maintaining, troubleshooting, repairing, and assisting with the installation of manufacturing equipment, building systems, and facility infrastructure across 2 manufacturing facilities. Maintain both buildings, including walls, floors, ceilings, doors, windows, plumbing fixtures, lighting, roofs, exterior areas, and the building perimeter.
NewFacilities Technician YMCA of Greater BostonFacilities TechnicianBoston, MAResponsible for the proper operation and documentation all building systems, to include without limitation, fire alarm, fire sprinkler, security alarm, emergency lighting and signage, emergency egress, building access control, monitoring and recording, fuel distribution, elevators, generators, communications, disposal, sanitary, domestic water, plumbing, electric, heating, cooling, and ventilation. General building and grounds maintenance includes without limitation, physically performing minor carpentry, cleaning, electrical, furniture / equipment assembly, landscaping, masonry, painting, plumbing, snow removal, supply and inventory control, and event preparations.
NewSr. Facilities Tech, Building Maintenance and HVAC RoslinCT USSr. Facilities Tech, Building Maintenance and HVACHopkinton, MAPerform and oversee Preventive Maintenance (PM) and Corrective Maintenance (CM) activities on facility and utility systems, including but not limited to air handlers, exhaust systems, electric heaters, electric boilers, chillers, reverse osmosis (RO) systems, compressed gas filter housings, lighting, building management systems (BMS), access controls, and pest control systems. Ensure all maintenance activities are executed in compliance with Health, Safety & Environmental (HSE) policies and procedures, including lockout/tagout (LOTO), confined space entry, working at heights, contractor management, and other applicable safe work practices.
NewFacilities & Maintenance Technician Museum of Ice CreamFacilities & Maintenance TechnicianBoston, MA$22–$26 / hourDaily Operations: Efficiently complete daily tasks by following the prescribed routines in the daily binder, ensuring all checklists are up-to-date and meticulously maintained. Efficiency: Proactively address facility needs and communicate effectively with the team to ensure operations run smoothly and the space is always welcoming.
NewSenior Mechanical Engineer -Critical Facilities Syska Hennessy GroupSenior Mechanical Engineer -Critical FacilitiesBoston, MA$104,953–$152,430 / yearYou will be responsible for creating basic designs under the direction of the senior engineer and/or senior designer, develop specifications, system narratives and system layouts for a variety of projects and project sizes. Working from our Chicago, IL office, you will contribute to the design of major projects from Data center engineering design across all sectors from markets around the world.
NewCommercial Facilities Engineer Hobbs Brook Real EstateCommercial Facilities EngineerWaltham, MA$30.88–$38.61 / hourJob Description: Hobbs Brook Real Estate LLC is an innovative commercial real estate leader with a portfolio of forward-thinking, sustainable properties in the United States and Singapore. Performs various duties such as preventative maintenance and building repairs, completes tenant work orders, acts as a vendor escort in base building and tenant space.
NewFacilities Technician SERVPRO Team JRFFacilities TechnicianSalem, MAThis part-time, morning-shift role is the backbone of our day-to-day operations — keeping our fleet road-ready, our equipment in top condition, our warehouse organized, and our building well-maintained. SERVPRO Team JRF is a leading cleaning, restoration, and construction franchise serving residential and commercial clients across Massachusetts.
NewManufacturing - Facilities Technician Kelly ServicesManufacturing - Facilities TechnicianMarlborough, MAYou’ll be: Troubleshooting, repairing, and performing preventive and corrective maintenance on facility MEP systems, including electrical distribution, HVAC, plumbing, boilers, compressors, pumps, and utility systems. Possess working knowledge in at least two of the following areas: electrical systems, HVAC-R, plumbing/pipefitting, boilers/steam systems, wastewater systems, pumps, controls, or RODI/WFI.
NewFacilities Technician - Part-Time UTEC, IncFacilities Technician - Part-TimeLowell, MAThe Facilities Technician is responsible for maintaining UTEC buildings in Lowell, Lawrence, and Haverhill by performing repairs, general carpentry, painting, and installations while ensuring a safe and clean environment. UTEC is committed to its vision for Diversity, Equity and Inclusion which pledges to honor the lived experiences and expertise of individuals; create community and celebration of cultures; challenge all forms of oppression; and embody a culture that leans into discomfort and recognizes it as a growth opportunity.
NewFacilities Maintenance Technician - Ira Toyota of Danvers Group 1 Automotive, Inc.Facilities Maintenance Technician - Ira Toyota of DanversDanvers, MA$27–$40 / hourWorking knowledge of building maintenance issues, including but not limited to, painting, electrical, small appliance repair, air filter replacement, and spills cleanup. Ira Toyota Motors of Danvers is part of fast growing Group 1 Automotive , a leader in automotive retail and we are looking to add a qualified FACILITIES MAINTENANCE PERSON to our team.
NewFacilities Engineering Technician BusekFacilities Engineering TechnicianNatick, MAThe successful candidate will perform electrical installation, troubleshooting, preventative maintenance, and facility improvement projects while supporting the overall operation of multiple buildings and infrastructure systems. Located in Natick, Massachusetts, Busek operates over 30,000 square feet of engineering laboratories, manufacturing space, and test facilities, including one of the nation's largest collections of spacecraft vacuum chambers.
NewSenior Facilities Engineer AbbVieSenior Facilities EngineerWorcester, MAIn addition, the position will assist the department manager with program management activities, including long-range planning, stakeholder engagement, and work prioritization, while also contributing to process improvements and the development of SOPs and policies that strengthen work management and operational consistency across the site. The Senior Facilities Engineer will play a key role in helping ensure safe, reliable, compliant, and efficient facility operations through technical leadership, problem solving, and collaboration with internal stakeholders and external vendors.
Facilities Technician (Mid Level) - Contract TalentBurst, Inc.Facilities Technician (Mid Level) - ContractMarlborough, MA$32.40 / hourUsing common hand and power tools such as screwdrivers, saws, drills, wrenches, and hammers, as well as some specialized equipment and electronic testing devices, these workers replace or fix worn or broken parts, where necessary, or make adjustments to correct malfunctioning equipment and machines. They inspect, repair and maintain machines, mechanical equipment, buildings and work on plumbing,basic electrical repairs and upgrades, and heating, ventilation, and air-conditioning (HVAC) systems.
NewFacilities Maintenance Technician William Raveis Real EstateFacilities Maintenance TechnicianBoston, MAAssist in exterior maintenance by performing landscape and horticultural maintenance, including manual labor such as walkway/driveway cleanup, weeding, shoveling, lifting, mulching, watering, or transporting materials as needed to ensure an organized and neat building appearance. \nCompany Description William Raveis Real Estate: A multi-billion-dollar company for real estate, mortgage, and insurance and the nation’s #1 independent family-owned real estate brokerage in the Northeast and Florida according to Real Trends.
NewFacilities Manager YMCA of Greater BostonFacilities ManagerBoston, MAResponsible for the proper operation and documentation all building systems, to include without limitation, fire alarm, fire sprinkler, security alarm, emergency lighting and signage, emergency egress, building access control, monitoring and recording, fuel distribution, elevators, generators, communications, disposal, sanitary, domestic water, plumbing, electric, heating, cooling, and ventilation. General building and grounds maintenance includes without limitation, physically performing minor carpentry, cleaning, electrical, furniture / equipment assembly, landscaping, masonry, painting, plumbing, snow removal, supply and inventory control, and event preparations.
NewFacilities Maintenance Technician - Full Time CATALDO AMBULANCE SERVICEFacilities Maintenance Technician - Full TimeLynn, MAPrevious hands-on experience in facilities maintenance, building systems, plumbing, carpentry, electrical, security, or other related services preferred. Ability to work safely and independently, pay attention to detail, maintain and develop knowledgeable skills and adhere to safety procedures at all times.
NewFacilities Technician III Syner-GFacilities Technician IIIBoston, MARemoteMaintain and repair complex utility systems including HVAC and environmental control systems, cold storage systems, compressed air and gas systems, Reverse Osmosis (RO) and Water for Injection (WFI) systems, clean steam generation systems, wastewater treatment systems, boilers, pumps, motors, and fire detection and suppression systems. This role is responsible for performing advanced maintenance activities, troubleshooting complex issues across multiple building systems, and supporting reliability and compliance requirements in laboratory, manufacturing, and utility environments.
NewFacilities Manager ESPLANADE ASSOCIATIONFacilities ManagerBoston, MA$70,000–$80,000 / yearEA’s contributions include funding and implementing the following enhancements, revitalizations and activations: over 150 free educational, recreational and cultural programs offered annually; nearly 200 new trees planted through the Lasting Esplanade Arbor Fund (L.E.A.F.); repair or reconstruction of beloved amenities including Lotta Fountain, Community Boating docks and Centennial Fountain; both temporary and long-term public art commissions; playground maintenance and accessible design, including the Gronk Playground in 2025; plans underway to introduce a new building and two-acre landscape improvement at Charlesbank that will equitably welcome many neighborhoods to a year-round destination in the park; and much more. This role will keep the pavilion and campus safe, welcoming, clean, and high-performing—from restrooms, community rooms, lobby, café, offices, and operations spaces to the trash room, pathways that need to be cleared of snow, irrigated lawns that require special care, HVAC, utility and security systems, and maintenance services.
NewEquipment and Facilities Technician Stellar Industries Corp.Equipment and Facilities TechnicianMillbury, MACHA Electron beam evaporation systems, Thick film screen printing machines, Disco Dicing machines and cut water support systems, Ferric and Cupric Chloride etching systems, Photo patterning equipment including Laminating, Exposure, and Development systems, Automated Electrolytic Plating line, High-Temperature BTU Furnaces, as well as various facility-related items including air handlers, air compressors, air filtration units, etc. The Equipment & Facilities Technician is responsible for troubleshooting, repair, and preventative maintenance on all production and facilities machinery, equipment, and instrumentation to sustain plant operations at efficient levels.
NewFacilities Maintenance Technician II (1st Shift) 6am-2:30PM (Tuesday - Saturday) Keystone ManagementFacilities Maintenance Technician II (1st Shift) 6am-2:30PM (Tuesday - Saturday)East Boston, MA$30–$33 / hourThe Facilities Maintenance Technician II, under supervision, is responsible for performing essential preventive maintenance and repair of building plumbing, mechanical, electrical, and control systems, including refrigeration, and A/C units at the hangar and terminal locations. Use computer-based CMMS system to create and closeout work orders with data including labor hours, equipment maintenance and parts used.