April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Hudson, New Hampshire30+ days ago
This role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.
Hudson, New Hampshire20 days ago
Experience doing root-cause analysis and complex debug activities on motherboard platforms (Intel server motherboard platforms is preferred). Overview: Client is seeking a Manufacturing Test Engineer or Test Technician to perform debug and validation efforts for Intel-based server motherboards.
Hudson, New Hampshire30+ days ago
You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
A successful candidate will assist ASIC development through creating custom analog layouts, floor planning entire chips, high level problem solving, and executing tape outs. ¿ Perform or guide physical layout, including floor-planning, and simulate circuits using extracted parasitic, contribute to design-for-test development.
Woburn, Massachusetts30+ days ago
Client is focused on delivering National Defense capabilities by driving mission-focused strategies to develop advanced technology systems enabling enduring products and solutions focused on achieving the customer vision. Applicants are expected to be self-motivated, detail oriented and have a demonstrated ability to effectively communicate with all levels of management and individual contributors on the program team through strong written and verbal communication skills.
Marlborough, MA3 days ago
li>Process development â Create process flow diagrams, mass and energy balances, and support HAZOP and FMEA risk assessments. The position requires strong communication skills, technical depth, and the ability to collaborate across teams.
p>Our Heart Failure R&D team is seeking a Senior Mechanical Engineer to provide technical leadership and hands-on expertise in the development of Mechanical Circulatory Support devices, specifically Left Ventricular Assist Devices (LVAD). You will work cross-functionally to design, analyze, prototype, and test implantable Class III devices, contributing to the full product lifecycle from concept through commercialization.
p>Bachelor’s degree in Optical Engineering, Physics, Photonics, or related discipline; Master’s or PhD strongly preferred. Deep proficiency with optical simulation tools (Zemax, Code V, FRED, LightTools, or equivalent).
p>Requirements: Highly motivated individual with a proven track record (7+ years) of innovative work designing precision mechanisms and/or opto-mechanical assemblies.
An emerging leader – experience as a technical lead, project lead, and/or working directly with customers.
li>Drive product development from concept through manufacturing, including: System architecture and conceptualization. Ability to innovate and apply new technologies or existing methods to solve complex design challenges.
May 29, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Expertise with RF subsystem and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits and/or frequency conversion circuits is desired. In this role, the Staff RF Engineer will support the development and production of complex multi-function modules used in challenging high reliability applications in all phases of the product life cycle.
Desired Skills (Nice to Have)Experience with project leadership, project cost and schedule management, i.e. EVMS, MS ProjectDoW (DoD) project development life cycle processes. The individual comes up to speed quickly, has an impact on our projects developing test stations/fixtures/automated test software, has familiarity with a process heavy work environment.
Desired Skills (Nice to Have)Experience with project leadership, project cost and schedule management, i.e. EVMS, MS ProjectDoW (DoD) project development life cycle processes. The individual comes up to speed quickly, has an impact on our projects developing test stations/fixtures/automated test software, has familiarity with a process heavy work environment.
Responsibilities will include assistance with continual improvement projects, gathering, organizing, and filing process and equipment data, execution, and support of small projects, and supporting facility. The temp Engineer is responsible for supporting the overall operation of the mechanical systems associated with the Cambridge and Weston sites.
Bachelor's degree in Chemical Engineering, Biochemistry, Biotechnology, Bioengineering, or a related life sciences field with a minimum of 2 - 4 years of relevant industry experience; OR a Master's degree with a minimum of 1 - 2 years of experience in biopharmaceutical manufacturing, process engineering, or process development. • Contribute to digitalization and data modernization efforts, including the development or maintenance of dashboards, structured data templates, automated trackers, and workflow tools (e.g., Excel-based tools, Power BI, or similar platforms).
p>More information about the holding company and overall organization can be found at
The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. Lead development and review of system security documentation including System Security Management Plans, Program Protection Plans, Security Risk Analyses, OPSEC Plans, and security CONOPS in accordance with DoDI 5000.02,
Employee pay is based on factors like relevant education, qualifications, certifications, experience, skills, seniority, location, performance, union contract and business needs. You will work closely with the technical lead, business development, client services and UX design teams to build intuitive and functional user interfaces.
Job Description: FM Approvals is an international leader in third-party testing and certification services.
Qualifications:
- MS or BS in Engineering, Electrical or Electro-Mechanical highly preferred + 2+ years of related experience.
Security Compliance: Oversee endpoint security configurations, including disk encryption (BitLocker), endpoint protection clients, and corporate mobile device management (MDM) policies. ensures that hospital staff—including clinicians, administrators, and support personnel—receive seamless, timely, and ITIL-aligned technical support to maintain uninterrupted patient care and operational workflows.
In order to complete the above-mentioned tasks, the following skills and experience is required: Experience with transmission planning, software simulations, IBR modeling, and transient analysis; Experience applying electrical theory to planning an electric power supply system; Experience using power system modeling and simulation software for steady state power flow, voltage, short circuit, stability, and electromagnetic transients; Experience with HVDC and inverter-based resource parameters and modeling, including simulation experience in weak grid systems; Experience with PSSE and PSCAD; Experience with Python and VBA; Experience with Powertech (TSAT, VSAT), ASPEN Oneliner, EMTP (ATP), TARA, and PI Processbook; Experience applying NERC TPL, NPCC, and ISO-NE planning procedures. Requires a Bachelor's degree or foreign equivalent in Electrical Engineer or a related field, and at least five years of experience as a Planning Engineer, Research Assistant, or related occupation.
Manchester, NH12 days ago
A successful Senior Lean Engineer should have: Bachelor's degree in Engineering, Operations, or related field (advanced degree preferred). This role drives measurable results through Lean, Six Sigma, and Theory of Constraints while partnering with cross-functional teams.
Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations. As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future.
With decades of industry leadership and a strong international footprint, they partner with leading chip manufacturers to drive innovation across industries including automotive, consumer electronics, and communications. The ideal candidate is an experienced electrical engineer with a strong background in hardware design and a proven ability to deliver projects independently.
A growing precision manufacturing environment is seeking a skilled Senior Process Engineer with strong CNC programming expertise to support new product introduction, optimize production processes, and drive continuous improvement across machining operations. Create, implement, and troubleshoot CNC programs for new part start ups using MasterCAM, PartMaker, or similar platforms.
Preferred experience includes: Hands-on with their operational stack-NinjaOne, CrowdStrike, Proofpoint, Barracuda Backup, and Azure Recovery Services Vault-or close equivalents. Strong automation and integration skills (PowerShell, Python, or equivalent), plus practical experience tying systems together via APIs and event-driven patterns.
Known for tackling complex clinical challenges, the company invests heavily in R&D, values engineering rigor, and fosters a hands‑on, collaborative culture where technical excellence is recognized and rewarded. As the Senior Mechanical Engineer, Product Development, you will lead the design and development of innovative electromechanical medical products used in high impact clinical applications.
p/>The AE candidate will need to develop a deep understanding of our clients' business, operations, and exposures to evaluate the nature, probability, and magnitude of loss potentials and build client-specific risk improvement strategies that clearly demonstrate FM's value-add. By aligning FM products and services to each client's unique needs and partnering with Account Managers to produce cohesive, client-facing deliverables, the AE will reinforce a tailored account strategy and the tangible value FM brings to each client's organization.
li>Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.
We are HCLTech, one of the fastest-growing large tech companies in the world and home to 218,000 people across 60 countries, supercharging progress through industry-leading capabilities centered around Digital, Engineering and Cloud. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries.
p/>Join the fun and follow us on social media to see what's happening at our company, and don't forget to connect with us on Lennar: Overview | LinkedIn<https://www.linkedin.com/company/lennar/> for the latest job opportunities.
Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career.
Dorchester, MA30+ days ago
In addition to leading union employees, the Lead Engineer will guide peers, internal and external to Distribution Engineering, to ensure all necessary engineering work for major projects is completed promptly and within budget, meeting financial compliance requirements. Ensures designs, specifications, modifications, and replacements for transmission and distribution systems related to major projects such as ESMP, Reliability, Capacity, Strategy — as well as necessary permits and customer notifications — are prepared accurately and delivered on time.
Other key duties and responsibilities are as follows: Technical Management: Oversee design, implementation, and maintenance of modern workspace identity services (Entra ID, Active Directory, Conditional Access, MFA, identity lifecycle, SSO, Managed Identities, Enterprise Applications, etc). Essential: Deep understanding of directory services, EntraID (PIM, Conditional Access, MFA, identity lifecycle, Managed Identities, Enterprise Applications, etc) and Active Directory in a global enterprise.
p>This role will collaborate with technical subject‑matter experts, security leadership, process and risk stakeholders, cyber threat intelligence analysts, defensive operations teams, and business system owners to ensure testing scenarios accurately represent realistic adversary behaviors and align with enterprise risk priorities. The Lead Engineer is expected to bring deep technical expertise across core security control domains, including identity and access management, data protection, secure software practices, cloud and infrastructure security, endpoint and detection technologies, network security, and vulnerability and threat management.
Competencies: Build trusting relationships Manage and develop people Foster teamwork and cross-functional collaboration Lead change Communicate strategic vision Create an engaged workforce Focus on the customer Take ownership & accountability. Technical Knowledge/Skill/Education/Licenses/Certifications: Familiarity with substation equipment such as transformers, circuit breakers, switchgear, reclosers, capacitor banks and associated controls, instrument transformers, reactors, switches, and batteries is desired.
p>As a Lead Engineer, you will work closely with internal teams, regulatory agencies, and external contractors to develop and implement remediation strategies that align with company requirements and industry best practices. We are seeking a highly skilled Site Investigation & Remediation Project Manager (Lead Engineer) to manage complex environmental investigation and remediation projects for our company.
Lead Engineer Blue Cross and Blue Shield of Massachusetts Inc
Lead EngineerBoston, MA30+ days ago
An employee's pay position within the salary range will be based on several factors including, but limited to, relevant education, qualifications, certifications, experience, skills, performance, shift, travel requirements, sales or revenue-based metrics, and business or organizational needs and affordability. Learn how we are dedicated to creating an inclusive and rewarding workplace that promotes excellence and provides opportunities for employees to forge their unique career path by visiting our Company Culture page.
p>Other supporting role responsibilities: • Represents the department and the company on various industry-related committees • Participates with other utilities and the planning staff of the Independent System Operator (ISO) in the preparation of regional transmission expansion studies • Coordinates and works in close collaboration with various internal departments such as Engineering, System Operations, Protection & Control, Communications, Project Management, Regulatory Policy, Compliance, Siting & Outreach, Real Estate, Investment Planning, and Finance as well as any other internal or external groups as necessary • Clearly and effectively communicates the results of analyses and action plans both verbally and in writing • Trains junior staff in technical analyses and procedures • Performs an emergent storm assignment as needed during times of inclement weather or adverse system conditions. This includes:
• Collection and review of the forecast loads to be included in the model • Collection, modification, and review of a variety of electric system parameters including: equipment ratings, impedances, contingency sets, protection and control parameters, as well as system topology • Collection, modification, and review of modeling for steady state, stability, short circuit, and EMT analyses.