OTHER

FEED

UNKNOWN

Perform at a journeyman level to construct, repair, restore, and install structural woodwork, masonry, glass and related materials using hand and power tools in accordance with blueprints, specs, established practices and pertinent state and local code. • Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter’s hand tools, and power tools.

HOUR

Pay Range:
USD $17.70 - USD $17.70 /Hr.

Overview:
This is a highly customer service oriented position in which employees should strive to exceed customer expectations. Perform at a journeyman level to construct, repair, restore, and install structural woodwork, masonry, glass and related materials using hand and power tools in accordance with blueprints, specs, established practices and pertinent state and local code. Responsible for estimating material costs and time required to complete project and to inspect work. 

Responsibilities:
• Install, repair and maintain drywall in all campus buildings/areas. • Develop and maintain campus database of paint types and locations. • Prepare surfaces/areas for painting; this may require removing old paint, filling holes and washing walls using various tools such as sandpaper, wire brushes, scrapers, etc. • Fill cracks, holes, and joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives. • Apply protective and decorative coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of buildings, furniture, equipment, and other structures. • Supervise summer paint crew. • Measure and mark cutting lines on materials, using ruler, pencil, chalk, and marking gauge. • Shape or cut materials to specified measurements, using hand tools, machines, or power saw. • Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required. • Assemble and fasten materials to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue. • Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter’s hand tools, and power tools. • Erect scaffolding and ladders for assembling structures above ground level. • Remove damaged or defective parts or sections of structures and repair or replace, using hand and power tools. • Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware using carpenter’s hand and power tools. • Select and order lumber and other required materials. • Build, install and repair formica counter tops, bathroom partitions, furniture, carpet, windows, doors cabinets, shelving, bulletin boards, show cases, picture frames, etc. • Repair and maintain room numbers and signage on campus.• Learn new Maintenance Mechanic Carpenter/Painter techniques as required to remain up-todate with current and new technologies/legal requirements as applicable • Live out and make decisions in line with the Clarkson University values in all daily activities • Operate and work in a safe manner at all times and ensure the highest level of housekeeping • Provide mentoring and leadership to interns, apprentices and/or student workers • Willingness to take courses and/or training to meet trade specific and University standards • Complete Clarkson Vehicle Safety Checklist before vehicle use. Be responsible for care, cleanliness, and maintenance of assigned vehicle and report all vehicle concerns to appropriate supervisor immediately • Operate a Clarkson vehicle in accordance with University policy • Perform other related duties incidental to the work described herein • Deliver timely, friendly, and effective service to University faculty, staff and students • Encourage and Promote Teamwork • Ability to gain general knowledge of the campus • Participate in reporting of campus damage and/or safety issues

Qualifications:
Education: Minimal Qualifications: • High School Diploma or equivalent. Preferred Qualifications: • Associates degree in building trades • Journeyman card in related building trades Experience: Minimal Qualifications: • Four (4) years of journeyman equivalent experience as a carpenter or painter. • Four (4) years of painting experience • Documented record of taking courses and or training to meet University standards. Preferred Qualifications: • Five (5) or more years at the journeyman equivalent experience level as a painter.

Essential Skills:
• Must have enthusiasm for the job, a customer service approach and be willing to work in a team environment • Hold a valid NYS driver’s license with a driving record acceptable to meet the University insurance standards • Proficient mathematical skills • Problem solving and analytical skills • Possess general knowledge of the campus layout and building locations • Demonstrated ability to establish and maintain effective working relationships with diverse constituencies • Excellent written and oral communication skills • Strong organizational skills are required • Knowledge of the tools, equipment, materials, and application techniques common to the painting trade • Knowledge and skill in hazardous materials handling, application, and disposal • Skill in the preparation and application of paints, stains, and surface preparation materials to a wide variety of surfaces • Must be able to function under stressful conditions and/or high volume with short turnaround

Physical Demands:
The physical demands characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Health & Safety:
Health & Safety: All staff has a statutory responsibility to take reasonable care of themselves, others and the environment and to prevent harm by their acts or omissions. All staff is therefore required to adhere to the University’s Health, Safety, and Environmental Policy & Procedures.

Disclaimer Statement:
DISCLAIMER: The above statements are designed to indicate the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all duties, responsibilities, skills, and qualifications required of personnel so classified.

EEO Statement:
Special Instructions to Applicants: An equal opportunity/affirmative action employer, Clarkson actively seeks and encourages applications from veterans and people with disabilities.  All offers of employment are subject to the applicant successfully passing a background check (including, but not limited to, employment verification, educational and other credential verification, and criminal records

Clarkson University

Maintenance Mechanic Carpenter/ Painter

Analysis Skills

Blueprints

Carpentry

Communication Skills

Construction

Cost Estimates

Customer Support/Service

Database Administration

Driver's License

Furniture

Furniture Construction

Furniture Repair

Hand Tools

Housekeeping/Cleaning

Installation Guide

Insurance

Leadership

Machine Tool

Maintenance Services

Masonry

Mathematics

Mentoring

Order Picking/Packing

Organizational Skills

Painting (Facilities and Maintenance)

Physical Demands

Presentation/Verbal Skills

Problem Solving Skills

Property Maintenance

Regulatory Requirements

Safety/Work Safety

Scaffolding

Surface Preparation and Characterization

Team Player

Time Management

University/School Policies

Woodworking

Writing Skills

[AW]-iCims

Perform at a journeyman level of expertise on a variety of operational and maintenance duties with a focus to include key and lock systems, door closures, lock and key work and other specialized duties pertaining to doors and door hardware. • Rekey locks; establish and maintain records of keys produced to include room numbers, key numbers and master key designations.

Pay Range:
USD $17.02 - USD $17.02 /Hr.

Overview:
This is a highly customer service oriented position in which employees should strive to exceed customer expectations. Perform at a journeyman level of expertise on a variety of operational and maintenance duties with a focus to include key and lock systems, door closures, lock and key work and other specialized duties pertaining to doors and door hardware. Responsible for estimating material costs and time required to complete a project or job. Ability to read blueprints as related to a iob. 

Responsibilities:
• Fabricate keys for desks, file cabinets, laboratories, offices and University vehicles. • Rekey locks; establish and maintain records of keys produced to include room numbers, key numbers and master key designations. • Repair and maintain Access Door Control System, be able to work with low voltage electrical systems. • Establish and maintain master key systems and related records. • Serve as a liaison with lock manufacturer to set up and maintain master key systems. • Install and repair locks, closures, panic devices, hinges and doors. • Review blueprints, building codes, and specs etc. • Layout, order material, and install in a neat and professional manner. • Service and maintain handicap doors and openers. • Install, maintain and inspect fire doors per applicable codes. • Create, inventory and document keys in fire department box. • Learn new locksmith techniques as required to remain up-to-date with current and new technologies. • Live out and make decisions in line with the Clarkson University values in all daily activities • Operate and work in a safe manner at all times and ensure the highest level of housekeeping • Provide mentoring and leadership to interns, apprentices and/or student workers • Willingness to take courses and/or training to meet trade specific and University standards • Complete Clarkson Vehicle Safety Checklist before vehicle use. Be responsible for care, cleanliness, and maintenance of assigned vehicle and report all vehicle concerns to appropriate supervisor immediately • Operate a Clarkson vehicle in accordance with University policy • Perform other related duties incidental to the work described herein • Deliver timely, friendly, and effective service to University faculty, staff and students • Encourage and Promote Teamwork • Ability to gain general knowledge of the campus • Participate in reporting of campus damage and/or safety issues

Qualifications:
Education:Minimal Qualifications: o High School Diploma or equivalent o Locksmith Certificate Preferred Qualifications: o Associates degree in the building trades o Journeyman card in related building trade Experience: Minimal Experience: o Four (4) years of journeyman equivalent experience in a related field o Documented record of taking courses and or training to stay current in skills Preferred Experience: o Five (5) years of experience with card access systems, Best keys, and Russwin and Sargent keys. o Five (5) years or more of journeyman equivalent experience in related field

Essential Skills:
• Must have enthusiasm for the job, a customer service approach and be willing to work in a team environment • Hold a valid NYS driver's license with a driving record acceptable to meet the University insurance standards • Proficient mathematical skills • Problem solving and analytical skills • Possess general knowledge of the campus layout and building locations • Demonstrated ability to establish and maintain effective working relationships with diverse constituencies • Excellent written and oral communication skills • Strong organizational skills are required • Must be able to function under stressful conditions and/or high volume with short turnaround

Physical Demands:
The physical demands characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Health & Safety:
Health & Safety: All staff has a statutory responsibility to take reasonable care of themselves, others and the environment and to prevent harm by their acts or omissions. All staff is therefore required to adhere to the University’s Health, Safety, and Environmental Policy & Procedures.

Disclaimer Statement:
DISCLAIMER: The above statements are designed to indicate the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all duties, responsibilities, skills, and qualifications required of personnel so classified.

EEO Statement:
Special Instructions to Applicants: An equal opportunity/affirmative action employer, Clarkson actively seeks and encourages applications from veterans and people with disabilities.  All offers of employment are subject to the applicant successfully passing a background check (including, but not limited to, employment verification, educational and other credential verification, and criminal records

Maintenance Mechanic Locksmith

Access Control

Building Codes

Control Systems

Electrical Engineering

Firefighting

Laboratory

Low Voltage (LV)

Record Keeping

Systems Maintenance

Re-tubing older boilers which includes cutting out old tubes with torches, cutting new tubes to length, rolling new tubes into tube sheet, beading ends of tubes, and to perform a hydrostatic test to ensure there are no leaks in the work performed. Install and assemble new boilers which include wiring all boiler controls, gas pipes, boiler supply and return lines, feed water lines, and intake air and exhaust, and testing for safe operations.

Pay Range:
USD $23.37 - USD $23.37 /Hr.

Overview:
This is a highly customer service oriented position in which employees should strive to exceed customer expectations. Perform Journeyman level skilled work in the installation, modification, assembly, maintenance, service, and repair of all types of residential and commercial hot water and steam boilers. Inspect equipment for proper operation, lubrication and cleaning, and follow a schedule of preventative maintenance to ensure facilities are in accordance with pertinent state and local codes. Perform a variety of maintenance welding tasks, rigging, plumbing and electrical trouble shooting. 

Responsibilities:
Operate, maintain and repair residential gas and oil furnaces. Monitor operation of unit and make adjustments to ensure optimum efficiency using flue gas analyzer. Operate, maintain and repair residential and commercial boilers both hot water and steam. Monitor them by checking water levels and pressures, testing low water controls, high limits, over pressure switches and all other safeties including safety valves. Trouble shoot electrical control circuits, low and high voltage, and replace necessary parts to maintain boiler’s operation. Participate in the design and installation of new boilers and heating equipment. Determine routing of pipe and location of equipment so it can be maintained and installed to trade practice specifications, blueprints and codes. Assist in the decision of when heating systems are started and shut down depending on outside air temperatures to ensure lowest cost of operations. Install and assemble new boilers which include wiring all boiler controls, gas pipes, boiler supply and return lines, feed water lines, and intake air and exhaust, and testing for safe operations. Install, maintain and repair condensate pumps, boiler feed pumps and circulating pumps replacing seals, impellers and motors, float type switches, single and three phase. Re-tubing older boilers which includes cutting out old tubes with torches, cutting new tubes to length, rolling new tubes into tube sheet, beading ends of tubes, and to perform a hydrostatic test to ensure there are no leaks in the work performed. Replace seals, rope or push nipples in cast iron sectional boilers by splitting cast sections apart and replacing necessary seals and gaskets. Reassemble boiler sections torqueing to proper specifications, and perform a hydrostatic test to ensure there are no leaks. Operate, trouble-shoot and maintain high efficiency boilers, gas fired domestic water heaters and steam operated water heaters. Perform a variety of heavy and light welding duties involving working with black iron, cold roll, aluminum, stainless steel, and cast iron. Welding processes include gas welding, stick welding, mig/tig welding. Perform other duties when necessary such as layout, fabrication assembly and finishes. Maintain the boiler rooms in a clean and safe condition. Participate in the painting of boiler machinery and rooms. Provide technical guidance and direction to supportive staff personnel including estimating costs for time and materials. Provide assistance to other trades projects as directed. Live out and make decisions in line with the Clarkson University values in all daily activities Operate and work in a safe manner at all times and ensure the highest level of housekeeping Provide mentoring and leadership to interns, apprentices and/or student workers Willingness to take courses and/or training to meet trade specific and University standards Complete Clarkson Vehicle Safety Checklist before vehicle use. Be responsible for care, cleanliness, and maintenance of assigned vehicle and report all vehicle concerns to appropriate supervisor immediately Operate a Clarkson vehicle in accordance with University policy Perform other related duties incidental to the work described herein Deliver timely, friendly, and effective service to University faculty, staff and students Encourage and Promote Teamwork Ability to gain general knowledge of the campus Participate in reporting of campus damage and/or safety issues

Qualifications:
Minimal Qualifications: High school diploma or equivalentPreferred Qualifications: Associates degree in boilermaker related field Journeyman card as boilermakerMinimal Experience: Four (4) years of journeyman equivalent experience as a boilermaker Documented record of taking courses and/or training to meet University standardsPreferred Experience: Four (4) or more years of journeyman equivalent experience as a boilermaker

Essential Skills:
NY State Pesticide License (if individual does not have this, they must obtain within 12 months)Must have enthusiasm for the job, a customer service approach and be willing to work in a team environmentHold a valid NYS driver’s license with a driving record acceptable to meet the University insurance standardsProficient mathematical skillsProblem solving and analytical skillsPossess general knowledge of the campus layout and building locationsDemonstrated ability to establish and maintain effective working relationships with diverse constituenciesExcellent written and oral communication skillsStrong organizational skills are requiredMust be able to function under stressful conditions and/or high volume with short turnaround

Physical Demands:
The physical demands characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Health & Safety:
Health & Safety: All staff has a statutory responsibility to take reasonable care of themselves, others and the environment and to prevent harm by their acts or omissions. All staff is therefore required to adhere to the University’s Health, Safety, and Environmental Policy & Procedures.

Disclaimer Statement:
DISCLAIMER: The above statements are designed to indicate the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all duties, responsibilities, skills, and qualifications required of personnel so classified.

EEO Statement:
Special Instructions to Applicants: An equal opportunity/affirmative action employer, Clarkson actively seeks and encourages applications from veterans and people with disabilities.  All offers of employment are subject to the applicant successfully passing a background check (including, but not limited to, employment verification, educational and other credential verification, and criminal records

Maintenance Mechanic Boilermaker

Cleanroom

Electrical Wiring

Electricity

Gas Welding

High Voltage (HV)

Identify Issues

Maintenance - Electrical

Maintenance - Plumbing

Oil and Gas

Paint Shop Pro Tubes

Preventative Maintenance

Pumps

Technical Leadership

Testing

Water Quality Testing

Welding

Perform routine preventive maintenance on vehicles; lubricate, fill with fuel, change oil, repair and mount tires, replace lights and install belts and hoses. Minimal Qualifications: Four (4) years of journeyman equivalent experience as an automotive mechanic o Documented record of taking courses and/or training to stay current/grow skills in trade.

Pay Range:
USD $18.81 - USD $18.81 /Hr.

Overview:
This is a highly customer service oriented position in which employees should strive to exceed customer expectations. Inspect, repair, and service fleet vehicles for the University as well as other equipment such as grounds automobiles and custodial equipment. Perform routine maintenance to prevent future breakdowns of vehicles and other University equipment

Responsibilities:
<ul><li>Perform basic and some major automotive repairs, maintenance, etc on University fleet vehicles.</li><li>Participate in standard mechanical repairs on vehicles to include, but not limited to, engine repairs, tune ups, repair of transmissions and differentials, replacing brake linings and making necessary adjustments.</li><li>Perform routine preventive maintenance on vehicles; lubricate, fill with fuel, change oil, repair and mount tires, replace lights and install belts and hoses.</li><li>Order supplies and parts necessary to maintain vehicles.</li><li>Maintain record of vehicle servicing and repairs.</li><li>Repair chain saws, lawn mowers, weed eaters and other small equipment.</li><li>Maintain and repair stationary and mobile generators used for emergency power. • Install portable power pumps.</li><li>Perform welding as needed to repair different types of machinery.</li><li>Operate all types of equipment such as trucks, tractors, lawn sweepers and other combustible engine equipment.</li><li>Service and repair gasoline and diesel engines.</li><li>Keeps equipment available and in a useable manner by inspecting and testing vehicles. • Maintain the equipment repair area in an orderly fashion so tools are readily available. • Assist grounds keepers with duties and responsibilities as needed.</li><li>Live out and make decisions in line with the Clarkson University values in all daily activities • Operate and work in a safe manner at all times and ensure the highest level of housekeeping • Provide mentoring and leadership to interns, apprentices and/or student workers • Willingness to take courses and/or training to meet trade specific and University standards • Complete Clarkson Vehicle Safety Checklist before vehicle use. Be responsible for care, cleanliness, and maintenance of assigned vehicle and report all vehicle concerns to appropriate supervisor immediately</li><li>Operate a Clarkson vehicle in accordance with University policy</li><li>Perform other related duties incidental to the work described herein</li><li>Deliver timely, friendly, and effective service to University faculty, staff and students</li><li>Encourage and Promote Teamwork</li><li>Ability to gain general knowledge of the campus</li><li>Participate in reporting of campus damage and/or safety issues</li></ul>

Qualifications:
Education: Minimal Qualifications:<ul><li>High School Diploma or Equivalent</li><li>NYS Inspections license</li></ul>Preferred Qualifications:<ul><li>CDL</li><li>Associates degree in automotive repair field</li></ul>Experience:Minimal Qualifications: Four (4) years of journeyman equivalent experience as an automotive mechanic o Documented record of taking courses and/or training to stay current/grow skills in tradePreferred Qualifications: Five (5) or more years at the journeyman equivalent experience level as an automotive mechanic

Essential Skills:
<ul><li>Must have enthusiasm for the job, a customer service approach and be willing to work in a team environment</li><li>Hold a valid NYS driver’s license with a driving record acceptable to meet the University insurance standards</li><li>Proficient mathematical skills</li><li>Problem solving and analytical skills</li><li>Possess general knowledge of the campus layout and building locations</li><li>Demonstrated ability to establish and maintain effective working relationships with diverse constituencies</li><li>Excellent written and oral communication skills</li><li>Strong organizational skills are required</li><li>Must be able to function under stressful conditions and/or high volume </li></ul>

Physical Demands:
The physical demands characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Health & Safety:
Health & Safety: All staff has a statutory responsibility to take reasonable care of themselves, others and the environment and to prevent harm by their acts or omissions. All staff is therefore required to adhere to the University’s Health, Safety, and Environmental Policy & Procedures.

Disclaimer Statement:
DISCLAIMER: The above statements are designed to indicate the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all duties, responsibilities, skills, and qualifications required of personnel so classified.

EEO Statement:
Special Instructions to Applicants: An equal opportunity/affirmative action employer, Clarkson actively seeks and encourages applications from veterans and people with disabilities.  All offers of employment are subject to the applicant successfully passing a background check (including, but not limited to, employment verification, educational and other credential verification, and criminal records

Maintenance Mechanic Automotive

Automotive Industry

Automotive Repair and Maintenance

CDL Driver's License

Diesel Engine

Equipment Maintenance/Repair

High School Diploma

Order Supplies

Tire Repair

Vehicle Fleets

Maintenance jobs in Canton, NY - find them here! Apply today to the top opportunities near you.

Top Maintenance Jobs in Canton, NY | Monster

Maintenance Jobs in Canton, NY

Resume Resources

Get noticed by top employers!

Maintenance Jobs in Canton, NY

Maintenance Mechanic Carpenter/ Painter Clarkson University

Maintenance Mechanic Locksmith Clarkson University

Maintenance Mechanic Boilermaker Clarkson University

Maintenance Mechanic Automotive Clarkson University

Resume Resources