April 9, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
The Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry. Successful candidates will have the ability to learn in a fast-paced environment, and the ability to collaborate with both the engineering teams and mechanics on the factory floor.
Master's degree or equivalent experience in Optics, Optical Sciences, Optical Engineering, Physics, Mechanical Engineering, Electrical Engineering, Computer Sciences, or a similar field. The ideal candidate will have strong experience in optical testing, calibration, data analysis, and test automation and a proven ability to develop and execute test procedures, analyze results, and drive hardware quality.
June 22, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
June 22, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
June 22, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Spacecraft or launch vehicle integration experience with demonstrated technical expertise in one or more of the following areas: Fluids/Propulsion Systems, Harnessing, Electrical Power Systems, Thermal Protection Systems, Environmental Control and Life Support Systems, Integrated Vehicle Test, MGSE/EGSE.
Mill Creek, WA30+ days ago
The Manufacturing Technician I is responsible for: following documented procedures, such as Manufacturing Work Instructions; performing inspections and functional tests to verify quality conformance; and following all safety protocols to perform all tasks in a safe environment. The base salary for the role will depend on a several job-related factors, including, but not limited to education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge and travel requirements for this position.
TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. The Core Components Fabrication Manager will interface extensively with the Natrium Fuel Design and Supply leadership team to ensure proper integration between functional areas to support on-time fuel load.
Mill Creek, WA30+ days ago
Execute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Background in mass production across multiple processes such as miniature motorized mechanisms, soft goods cutting and laminating, kitting, active optical alignment, casting, molding, machining, electronics packaging, coatings, and additive manufacturing. The ideal candidate will have strong experience in developing and scaling novel manufacturing processes from concept to pilot-production and a proven ability to deliver reliable, high-performance hardware prototypes for future projects.
This role provides full operational leadership for day to day production activities in GMP aligned hot cell and glovebox operations, ensuring safe, compliant, and efficient manufacturing performance. TerraPower Isotopes is seeking a Radioisotopes Manufacturing Manager to lead all aspects of actinium 225 manufacturing as an API starting material precursor for targeted radiopharmaceutical therapies.
To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. Job Description:
Under general supervision and following established policies, the Specialist, Manufacturing Engineer performs professional assignments requiring general use and application of design concepts, practices, and techniques for highly reliable space hardware production.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer II supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
You must deeply understand not just how to manufacture the product, but the product itself - its design intent, functionality, and critical features - to effectively translate engineering requirements into successful production outcomes. The ideal candidate thrives on the shop floor, takes personal ownership of their manufacturing processes, and finds satisfaction in directly engaging with the hardware and production teams to solve real-world challenges.
p>RESPONSIBILITIES: Design and implement electro-mechanical assembly and test processes Collaborate with the mechanical design team to incorporate design for manufacturability Lead prototype builds ensuring incremental milestones for the production development are met Ensure manufacturing systems are capable of hitting high volume rate, cost and quality targets Lead facilities development, floor layout, headcount requirements and material flow definition Identify tooling and hardware requirements, design and implement into production processes Identify automation opportunities and establish requirements as well as evaluating return on investment for each Work with in-house resources or vendors as necessary to develop these solutions and implement on production line. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Key involvement includes design for manufacturability early in the product development, ensuring intrinsic quality is built-in to the product through robustness of processes and supporting continuous improvement and maintenance throughout the production cycle.
In particular:Controlling linear motion stagesControlling hexapod positionersControlling robot armsKnowledge about camera optics and acquisition settingsExperience with VR or AR systemsData analysis and visualization. You will work closely with teams developing novel sensors, silicon, and integrated products to guarantee successful calibration and establish clear interfaces and quality gates.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer I supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
p>RESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product and process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Proficiency in Geometric Dimensioning and Tolerancing (GDT) principles and applications • Knowledge of metrology tools and techniques for measuring and characterizing mechanical parts • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
Snoqualmie, Washington8 days ago
has three operating divisions: (a) Security, providing security and inspection systems, turnkey security screening solutions and related services; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components and electronic manufacturing services for original equipment manufacturers with applications in the defense, aerospace, medical and industrial markets, among others.. Qualifications: - Bachelor’s degree in Electronics Engineering, Manufacturing Engineering, or a related field, and a minimum of five (5) years of relevant manufacturing engineering experience; or a Master’s degree with at least three (3) years of relevant experience; or a PhD with relevant academic or industry experience; or an equivalent combination of education and experience, including eleven (11) or more years of related experience instead of a degree.
Basic Qualifications - Bachelor's degree in mechanical engineering, electrical engineering, material science, physics or equivalent - 3+ years of hardware design and validation of components, subsystems and systems experience - Knowledge of Lean Manufacturing - Experience in root cause analysis and troubleshooting or problem solving - Experience working with interdisciplinary teams to execute product design from concept to production - Familiarity with Low-Rate Manufacturing Environments & New Product Introduction Preferred Qualifications - Knowledge of engineering practices of hardware development life cycle, including control management, build processes, and testing. - 10% - Mentorship settings with other engineers on the team, performing collaborative work & coaching to develop the team members skillsets, while ensuring common team execution to your technical vision About the team The Optical Inter-Satellite Link Production team is a multi-disciplinary organization responsible for all aspects of production of the key modules enabling satellite-to-satellite communication.
In terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Experience with mass production of systems requiring multiple manufacturing processes such as miniature motorized mechanisms, soft goods processing, active optical alignment, casting, molding, machining, electronics packaging, coatings, and additive manufacturing.
25% - Independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc. You'll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing optical, electrical, and mechatronic module to space.
25% - Independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc. You'll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing optical, electrical, and mechatronic module to space.
p>RESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite and ground station systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Drive design for manufacturing feedback and best practices with peer teams for efficient and highly scalable production designs • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product & process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base.
PREFERRED SKILLS AND EXPERIENCE:
• Master's degree in optics, engineering, business, or supply chain • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Bachelor, Master, or Doctorate of Science degree in engineering, computer science, mathematics, physics, or chemistry from an accredited course.
Employer will accept a Bachelor's degree, or foreign equivalent, in Industrial Engineering, Mechanical Engineering, Operations, Business Administration, or related discipline followed by 5 years of experience as a project engineer, process engineer, manufacturing engineer, or related occupation. The pay range for this position in Bellevue, WA is $96416 - $114900 (yr); however, base pay offered may vary depending on job-related knowledge, skills, and experience A sign-on bonus and restricted stock units may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered.
We are looking for a talented manufacturing engineer to support the production of Starlink satellites, who will be responsible for leading the efficient and reliable acceptance testing of satellite electronics, development of advanced electrical test systems, and evolution of production and testing processes. ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Qualifications:** + Bachelor's degree in Manufacturing Engineering, Manufacturing Engineering Technology, Plastics Manufacturing Engineering, or Mechanical Engineering from an ABET certified university + 1-2 years of related experience + Root cause analysis using various Problem-Solving methodologies + Understanding & knowledge of continuous improvement (Toyota Production System, Kaizen, Lean, etc.) + Comfortable working problems of moderate scope where analysis of data requires evaluation of identifiable factors + Ability to exercise judgment within procedures and practices to determine appropriate action + Must build productive internal/external working relationships + Ability to read and interpret mechanical drawings required + Ability to handle high pressures, engineering workload, and understand impact of duties + Respond to metric/result-oriented environment, take initiative to meet goals **Fortive Corporation Overview** Fortive's essential technology makes the world safer and more productive. We're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care.
Our client in the Greater Seattle, WA area is a precision manufacturer offering a variety of manufacturing and custom-engineered solutions to solve the most complex challenges and is looking for a Manufacturing Engineer responsible for providing support for their Company. Main Duties: Evaluate manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.
Redmond, Washington4 days ago
Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment.
You'll work closely with the Design Engineering and Supplier Manufacturing teams to ensure new designs are optimized for manufacturing while driving improvements in yield, cycle time, and cost for existing hardware. Amazon Leo will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.
p>ITAR REQUIREMENTS: - To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Our engineers are endlessly curious, love to learn and try out new things, and work collaboratively across disciplines in a dynamic environment with changing needs as we strive to deliver high-impact technology on a global scale.
With over 6500 people worldwide and 65 years caring for patients and healthcare professionals, we are committed to driving healthier outcomes for people facing mobility challenges. Our products and solutions are designed to promote a safe and dignified experience through patient handling, medical beds, personal hygiene, disinfection, diagnostics, and the prevention of pressure injuries and venous thromboembolism.
p>Since 1969, Romac has been dedicated to "connecting people to water" by designing and manufacturing innovative, high-quality American waterworks products. From initial concept to final implementation, youll be involved in every stage of the project lifecycle, including research, planning, design, testing, and analysis.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.