Manufacturing Technician B - 2nd Shift L3Harris TechnologiesManufacturing Technician B - 2nd ShiftRedmond, WA$22.83–$42.54 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Manufacturing Technician B - 1st Shift L3Harris TechnologiesManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Manufacturing Technician C - 1st Shift L3Harris TechnologiesManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewSr Electrical Engineer, Last Mile Delivery & Technology, Last Mile Delivery & Technology Amazon.com Services LLCSr Electrical Engineer, Last Mile Delivery & Technology, Last Mile Delivery & TechnologyBellevue, WAExperience designing complex embedded electronics architectures and interconnections — including SoCs, MCUs, FPGAs, DRAM, storage, digital communication interfaces (e.g., Ethernet, USB, CAN, I2C, SPI), and high-speed routing. * Develop electrical schematics and provide oversight for component placement and layout activities of printed circuit board assemblies (PCBAs) — including component selection, floor planning, signal and power integrity review.
NewSenior Hardware Engineer, Automation Amazon.com Services LLCSenior Hardware Engineer, AutomationSeattle, WAThis role requires deep experience with automated assembly systems, robotic platforms, material handling, and safety systems, along with the ability to think holistically—connecting vendor evaluation, mechanical design, and system-level performance. - Independently design, develop, and validate mechanical hardware for automated systems including workstations, robotic arms, safety systems, material handling, and part load/unload mechanisms.
NewCAD/CAE Engineer ComriseCAD/CAE EngineerRedmond, WA$54–$56.66 / hourTemporaryContractorFull timeJob title: CAD/CAE Engineer Location: Onsite at Redmond, WA Pay range: $54 - $56.66/hr W2 Responsibilities: Supports engineering data quality and PLM readiness by executing CAD data cleanup and alignment activities within CAD and PLM systems. Success in this role depends on strong attention to detail, ability to follow structured processes, and effective collaboration with engineering teams.
NewD05 - ENGINEERING / VALIDATION - Computer System Validation Engineer ECLAROD05 - ENGINEERING / VALIDATION - Computer System Validation EngineerBothell, WA$76.61–$81.25 / hourBachelor's degree in a life sciences or engineering / IT discipline or equivalent industry experience (a combination of industry-specific education and work experience may be used to substitute this degree requirement) 4+ years of direct experience with CSV activities, strong knowledge of GAMP / risk-based approaches to validation and good understanding of electronic records and signatures. Strong knowledge on development of CSV documentation (Validation Plans, Requirements, Specifications, Assessments, Test Scripts [IQ / OQ / PQ or equivalent], Summary Reports, Trace Matrices, SOPs, etc.).
NewCertification Engineer JobotCertification EngineerMedina, WA$74,000–$95,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. The successful candidate will be responsible for a diverse range of certification-related tasks, including developing training material on certification/ODA procedures and ensuring compliance with FAA regulations.
EWIS Engineer (w/Capital Harness Experience) 804 TechnologyEWIS Engineer (w/Capital Harness Experience)Seattle, WA$165,000–$184,000 / yearFull timeYou will play a key part in ensuring wiring harnesses and interconnection systems meet all functional, safety, and certification requirements while delivering high-quality engineering solutions to our customers. We are seeking a talented EWIS (Electrical Wiring Interconnection System) Engineers with 5+ years of drawing and design experience in Siemens Capital Harness (Capital).
Senior Electrical Engineer - Planning & Coordination MicrosoftSenior Electrical Engineer - Planning & CoordinationRedmond, WA$119,800–$234,700 / yearPartner across qubit design, electrical engineering, mechanical engineering, systems engineering, reliability, sourcing, supply chain, fabrication partners, contract manufacturers, system integrators, and leadership teams to align deliverables, resolve blockers, and support high-quality execution. We are seeking a Senior Electrical Engineering - Engineering Planning Coordinator with an electrical engineering background to lead complex printed circuit board (PCB) supplier engagements, drive process development, coordinate multidisciplinary hardware teams, and oversee program schedules, budgets, and resource planning.
NewStructural Design Engineer Dogwood Industries LLCStructural Design EngineerBothell, WA$81,000–$110,000 / yearDogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. To perform the essential functions of this job, the employee is regularly seated at a computer desk with the option to stand, is utilizing the telephone frequently, and participating in meetings with colleagues, clients, third party vendors, etc.
Manufacturing Engineer 3 Spectraforce Technologies Inc.Manufacturing Engineer 3Woodmont Beach, WAFull timeManufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.
People Analytics AI Engineer SamsaraPeople Analytics AI EngineerSeattle, WAThis Staff AI Engineer role sits directly within the People team and acts as the technical bridge between HR professionals, people operations, program managers and the people that build Samsara, You’ll design, develop, and operate secure, scalable applications, automations, and AI workflows that transform manual HR work into efficient, production-grade solutions. • Proficiency with low-code / no-code automation platforms (e.g., Workato, UiPath, Zapier), core enterprise platforms (e.g., Workday, Google Suite, Slack, Salesforce, ServiceNow), AWS and similar platforms, and data warehouses (e.g., Databricks, Snowflake, Google BigQuery, Amazon Redshift).
Electrical Engineer Davis Wire CorporationElectrical EngineerKent, WAHistorically talented at restoring distressed companies, Heico strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. The employee is occasionally required to use hands to finger, handle or feel and reach with hands and arms, lift and/or carry up to 50 pounds, balance, bend, stoop or kneel, climb, push/pull and squat, or crouch.
Manufacturing Engineer III/Sr. - Design for Automation Terex CorporationManufacturing Engineer III/Sr. - Design for AutomationRedmond, WAFull timeThe Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.
Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue Origin LLCManufacturing Engineer II, III, Sr (Multiple Shifts) - LunarSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewStructural/Civil Engineer (Engineer-in-Training) WeyerhaeuserStructural/Civil Engineer (Engineer-in-Training)Seattle, WA$69,300–$113,500You will also develop design tools, improve technical literature, and work with manufacturing teams to deliver production-ready solutions, while gaining exposure to laboratory testing and building codes. Description: Weyerhaeuser is a global leader in timber and wood-framed construction, delivering innovative products and solutions for residential, light commercial, and home improvement applications.
Manufacturing Engineer 3 Hexcel CorporationManufacturing Engineer 3Kent, WA$77,968–$130,228 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Manufacturing Engineer III Hexcel CorporationManufacturing Engineer IIIKent, WA$77,968–$130,228 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Program Chief Engineer LeidosProgram Chief EngineerLake Stevens, WA$131,300–$237,350If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. Leidos’ Undersea Systems Division is a recognized leader in C4ISR technologies, delivering innovative, mission-critical solutions across sensor networks, unmanned systems, and tactical platforms.
Manufacturing Engineer 2 (Aerospace) Parker Hannifin CorporationManufacturing Engineer 2 (Aerospace)Woodmont Beach, WA$83,250–$138,550 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Manufacturing Engineer II Hexcel CorporationManufacturing Engineer IIKent, WA$77,968–$117,324 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Manufacturing Engineer III Blue Origin LLCManufacturing Engineer IIISeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Spacecraft or launch vehicle integration experience with demonstrated technical expertise in one or more of the following areas: Fluids/Propulsion Systems, Harnessing, Electrical Power Systems, Thermal Protection Systems, Environmental Control and Life Support Systems, Integrated Vehicle Test, MGSE/EGSE.
Manufacturing Engineer III - Product Development Sekisui AerospaceManufacturing Engineer III - Product DevelopmentRenton, WAFull timeThis responsibility encompasses the entire R&D manufacturing value chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and documentation associated with the processes that the Manufacturing Engineer oversees. Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets.
NewManager, Infrastructure Project Advisory (Construction/Engineering) KPMGManager, Infrastructure Project Advisory (Construction/Engineering)Seattle, WA$110,295–$225,515 / yearClient coordination, subcontractor management for full life cycle construction projects including planning and work breakdown structures, pre-construction services, sourcing and procurement of contracts, contract administration, scheduling, cost estimating, quality management, project reporting, and project closeout. Qualifications: Minimum five years of recent experience in construction management or construction advisory services with increasing roles and responsibilities in major power and utilities, oil and gas, infrastructure, manufacturing, healthcare, or public sector projects.
Experienced Manufacturing Engineer (CapEx Focus) Parker Hannifin CorporationExperienced Manufacturing Engineer (CapEx Focus)Woodmont Beach, WA$83,250–$138,550 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Leads capital equipment and process improvement projects end-to-end-managing scope, schedule/milestones, budget/CapEx tracking, and cross-functional coordination through installation, start-up, and closure while escalating risks/issues as needed.
Senior Manufacturing Engineer (CapEx) Parker Hannifin CorporationSenior Manufacturing Engineer (CapEx)Woodmont Beach, WA$111,450–$195,150 / yearFull timeManagement of extensive capital project - leadership experience spanning capital equipment procurement (specification development, supplier evaluation, RFQ/RFP support, vendor selection, FAT/SAT), project management (charter, scope, schedule, risk, cost control), CapEx justification (NPV/ROI/payback aligned to strategy), and equipment/line installation, commissioning, and validation with minimal operational disruption. Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.
Manufacturing Engineer (Aftermarket) Parker Hannifin CorporationManufacturing Engineer (Aftermarket)Woodmont Beach, WA$69,500–$115,000 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Manufacturing Engineer (Aerospace) Parker Hannifin CorporationManufacturing Engineer (Aerospace)Woodmont Beach, WA$69,500–$115,000 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Manufacturing Assembly Tech II Bruker Nano IncManufacturing Assembly Tech IIMill Creek, WAFull timeThe Manufacturing Technician I is responsible for: following documented procedures, such as Manufacturing Work Instructions; performing inspections and functional tests to verify quality conformance; and following all safety protocols to perform all tasks in a safe environment. The base salary for the role will depend on a several job-related factors, including, but not limited to education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge and travel requirements for this position.
Senior Manufacturing Engineer (Aerospace) Acara SolutionsSenior Manufacturing Engineer (Aerospace)Everett, WAFull timeJob Requirements.
Manufacturing Production Technician Bruker Nano IncManufacturing Production TechnicianMill Creek, WAFull timeExecute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.
Engineer - Manufacturing Castings Blue Origin LLCEngineer - Manufacturing CastingsArlington, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Process Engineer V (Manufacturing) Bucher & Christian Consulting, Inc. dba BCforward (BCF)Process Engineer V (Manufacturing)Redmond, WAFull timeBackground in mass production across multiple processes such as miniature motorized mechanisms, soft goods cutting and laminating, kitting, active optical alignment, casting, molding, machining, electronics packaging, coatings, and additive manufacturing. The ideal candidate will have strong experience in developing and scaling novel manufacturing processes from concept to pilot-production and a proven ability to deliver reliable, high-performance hardware prototypes for future projects.
Specialist, Manufacturing Engineer L3Harris Technologies IncSpecialist, Manufacturing EngineerRedmond, WA$84,000–$156,000 / yearTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. Job Description: Under general supervision and following established policies, the Specialist, Manufacturing Engineer performs professional assignments requiring general use and application of design concepts, practices, and techniques for highly reliable space hardware production.
Manufacturing Engineer II Karman Holdings IncManufacturing Engineer IIMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer II supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
Systems Engineer V Spectraforce Technologies Inc.Systems Engineer VRedmond, WAFull timeIn particular:Controlling linear motion stagesControlling hexapod positionersControlling robot armsKnowledge about camera optics and acquisition settingsExperience with VR or AR systemsData analysis and visualization. You will work closely with teams developing novel sensors, silicon, and integrated products to guarantee successful calibration and establish clear interfaces and quality gates.
Manufacturing Engineer, Solar Starlink Space Exploration Technologies CorpManufacturing Engineer, Solar StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: Design and implement electro-mechanical assembly and test processes Collaborate with the mechanical design team to incorporate design for manufacturability Lead prototype builds ensuring incremental milestones for the production development are met Ensure manufacturing systems are capable of hitting high volume rate, cost and quality targets Lead facilities development, floor layout, headcount requirements and material flow definition Identify tooling and hardware requirements, design and implement into production processes Identify automation opportunities and establish requirements as well as evaluating return on investment for each Work with in-house resources or vendors as necessary to develop these solutions and implement on production line. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
Manufacturing Engineer III Karman Holdings IncManufacturing Engineer IIIMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Key involvement includes design for manufacturability early in the product development, ensuring intrinsic quality is built-in to the product through robustness of processes and supporting continuous improvement and maintenance throughout the production cycle.
Manufacturing Engineer - 2nd shift, Amazon Leo AmazonManufacturing Engineer - 2nd shift, Amazon LeoRedmond, WABasic Qualifications - Bachelor's degree in mechanical engineering, electrical engineering, material science, physics or equivalent - 3+ years of hardware design and validation of components, subsystems and systems experience - Knowledge of Lean Manufacturing - Experience in root cause analysis and troubleshooting or problem solving - Experience working with interdisciplinary teams to execute product design from concept to production - Familiarity with Low-Rate Manufacturing Environments & New Product Introduction Preferred Qualifications - Knowledge of engineering practices of hardware development life cycle, including control management, build processes, and testing. - 10% - Mentorship settings with other engineers on the team, performing collaborative work & coaching to develop the team members skillsets, while ensuring common team execution to your technical vision About the team The Optical Inter-Satellite Link Production team is a multi-disciplinary organization responsible for all aspects of production of the key modules enabling satellite-to-satellite communication.
Manufacturing Engineer, Amazon Leo Amazon.com IncManufacturing Engineer, Amazon LeoRedmond, WA25% - Independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc. You'll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing optical, electrical, and mechatronic module to space.
Manufacturing Engineer - 2nd Shift, Amazon Leo Amazon.com IncManufacturing Engineer - 2nd Shift, Amazon LeoRedmond, WA25% - Independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc. You'll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing optical, electrical, and mechatronic module to space.
NewManufacturing Engineer II Fortive CorporationManufacturing Engineer IIEverett, WA$81,190–$135,585 / yearQualifications Bachelor's degree in Manufacturing Engineering, Manufacturing Engineering Technology, Plastics Manufacturing Engineering, or Mechanical Engineering from an ABET certified university.3-5 years of related experience. As a Manufacturing Engineer II with Fluke, you will be tasked with analyzing, developing, implementing, and maintaining methods, manufacturing operation sequences, specifications, and equipment requirements for production/assembly of new and existing products.
Manufacturing Engineer I Karman Holdings IncManufacturing Engineer IMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer I supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
NewManufacturing Engineer - Process Quality, Hardware Engineering - Manufacturing AmazonManufacturing Engineer - Process Quality, Hardware Engineering - ManufacturingSeattle, WABachelor's or Master's degree in Mechanical, Industrial, Manufacturing Engineering or similar related field or equivalent experience.2+ years of Manufacturing Engineering work experience with server platforms or on high‑tech hardware.3+ years of product development experience. Our Process Quality team works closely with our ODMs, CMs, internal AWS hardware and software development teams, and with upstream component vendors to scale up manufacturing processes and ensure we can achieve our throughput and quality targets.
Manufacturing Engineer - Supplier Development Starlink Space Exploration Technologies CorpManufacturing Engineer - Supplier Development StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product and process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Proficiency in Geometric Dimensioning and Tolerancing (GDT) principles and applications • Knowledge of metrology tools and techniques for measuring and characterizing mechanical parts • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
NewDFX Manufacturing Engineer: NPI & Process Leader Fortive CorporationDFX Manufacturing Engineer: NPI & Process LeaderEverett, WAThe ideal candidate will have a Bachelor's degree in Engineering and 5-8 years of experience in manufacturing engineering, focusing on continuous improvement and cost reduction. Fortive is seeking a DFX Manufacturing Engineer in Everett, Washington to lead design for excellence across new product introductions.