$66.67/hr. - Secret-Cleared RF Engineer PGS Worldwide$66.67/hr. - Secret-Cleared RF EngineerCamarillo, CA$66.67 / hourThis onsite role requires active Secret clearance, RF systems experience, strong communication skills, and the ability to support RF hardware design, component selection, prototyping, testing, chamber testing, troubleshooting, and integration with software and aircraft systems. The RF Engineer will support development of Electronic Warfare systems for military aircraft, primarily supporting a Navy-led team developing systems for the U.S. Marine Corps.
Job Opportunity for Engineer RF Microwave Design 2 with our Aerospace Client Artech LLCJob Opportunity for Engineer RF Microwave Design 2 with our Aerospace ClientCamarillo, CA$64–$70 / hourResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. • Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new system’s RF design.
Engineer RF Microwave Design 2 First Tek, Inc.Engineer RF Microwave Design 2Camarillo, CAResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. • Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new system's RF design.
Electrical Engineer GrvtyElectrical EngineerVentura, CaliforniaAn employee in this position frequently sits or stands in the same location with opportunity to move about; regularly thinks, concentrates, analyzes, interprets, interacts with others, and communicates orally and in writing; regularly reads, sees, hears, and speaks; regularly uses a computer; and frequently uses hands to write, type, finger, handle, or feel. Pay Range: At GRVTY, we understand that compensation is influenced by many factors—such as geographic location, federal contract labor categories, wage rates, prior experience, skillsets, education, and certifications.
Systems/Principal Systems Engineer Northrop Grumman CorpSystems/Principal Systems EngineerCamarillo, CA$91,800–$137,600 / yearBasic Qualifications for Principal Systems Engineer: • Bachelor's degree in a STEM field (Science, Technology, Engineering or Math) and 5+ years of relevant experience or Master's degree in a STEM related field with 3+ years of relevant experience • US citizen • Must have Secret clearance • Some experience with hardware and software integration (school and or work experience). Basic Qualifications for Systems Engineer: • Bachelor's Degree in a STEM field (Science, Technology, Engineering or Math) and 2+ years of relevant experience or Master's Degree in a STEM related field with 1+ years of relevant experience • US citizen • Must have Secret clearance • Some experience with hardware and software integration (school and or work experience).
RF Microwave Design Engineer 2 DP ProfessionalsRF Microwave Design Engineer 2Camarillo, CAResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. Responsibilities: Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new system’s RF design.
#2662 Field Engineer- BOAT MECHANIC (FE30) ADVANTEDGE TECHNOLOGY, INC.#2662 Field Engineer- BOAT MECHANIC (FE30)Port Hueneme, CA$28–$33 / hourSeeking a motivated and experienced Boat Mechanic/Deckhand to support operations aboard the Self Defense Test Ship (SDTS), operating out of Port Hueneme, California. • Support shipboard casualty response and emergency operations as well as participate in shipboard drills, training, andoperational evolutions.
Engineer Radio Frequency Microwave Design 2 BelcanEngineer Radio Frequency Microwave Design 2Camarillo, CAResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. Responsibilities: * Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new systems RF design.
#2662 Field Engineer- BOAT MECHANIC (FE30) AdvantEdge Technology Inc#2662 Field Engineer- BOAT MECHANIC (FE30)Port Hueneme, CA$28–$33 / hourLevel/Salary Range: $28 - 33 + WD stipend $5.55 HourlyPosition FT/PT: Full TimeRole and Responsibilities: Seeking a motivated and experienced Boat Mechanic/Deckhand to support operations aboard the Self Defense Test Ship (SDTS), operating out of Port Hueneme, California. Support shipboard casualty response and emergency operations as well as participate in shipboard drills, training, andoperational evolutions.
Engineer Radio Frequency Microwave Design 2-1517 The Kemtah Group, Inc.Engineer Radio Frequency Microwave Design 2-1517Camarillo, CAResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. Responsibilities: Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new systems RF design.
Engineer Radio Frequency Microwave Design 2 Belcan LLCEngineer Radio Frequency Microwave Design 2Camarillo, CAResearch and recommend appropriate COTS or vendor developed RF components (transceivers, antennas, amplifiers, analog filters, switches, couplers, splitters, cables, etc.) for a new system based on RF performance requirements; size, weight, and power (SWAP) constraints; aircraft space limitations; existing aircraft antenna locations; etc. Responsibilities: Follow USMC supplied operational scenarios, architecture framework (DoDAF), and RF performance requirements for developing a new systems RF design.
R&D Tac Air Fighter Pilot Textron IncR&D Tac Air Fighter PilotCAExperience with test & evaluation of installed systems on fighter aircraft Minimum Qualifications + Previously qualified DoD-trained Fighter Pilot + Previously qualified 4-Ship/Division Flight Lead + 700 hours Pilot in Command (PIC) of any fixed wing DOD-owned/operated fighter aircraft + 100 hours PIC at night + Logged 100 hours PIC time in the past 12 months + Current FAA First Class Medical Certificate + FAA Single Engine, Commercial Certificate with Instrument Privileges + Secret Security Clearance, US Citizen Specific Contract Qualifications 1000 hours PIC of a military tactical aircraft 500 hours Pilot in Command (PIC) of any fixed wing DOD-owned/operated fighter aircraft Desired Qualifications + USAF WIC graduate, USAF adversary qualification + USNFWS/NAWDC/TOPGUN graduate + TPS graduate + DoD military Instructor Pilot qualification + Mission Commander qualification + Military or Civilian Flight Examiner qualification + Functional Check Flight Pilot qualification + NVG Instructor, CRM Instructor + FAA CFI(I) Certificate + Familiarization with DoD Commercial Air Services industry + FAA Authorized Experimental Aircraft (AEA) privileges (list types) + DoD Safety School or Board President Course graduate + Squadron Command experience + Active fighter flying (for each fighter type, provide total hours, date of last sortie) + Actively flying (provide 1-year look-back per active aircraft type) How We Care At Textron Systems, our talented people make us successful. R&D Tac Air Fighter Pilot Description ATAC Research & Development Manager, Tactical Aircraft About Textron Textron Inc. is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with innovative solutions and services.
Engineering Technician General Dynamics CorpEngineering TechnicianPort Hueneme, CARemote$31.37–$34.41 / hourREPRESENTATIVE DUTIES AND TASKS: The LCS DEPS Mission Package General Technician will engage in Maintenance, Mission Module Movements/Embarks and Debarks, Pre-embark Staging, Maintenance Planning, Fly-Away/Distance Support and Logistic Engineering Support. Candidate will be required to perform physically demanding work, to include working aloft, in tight, restricted spaces onboard LCS Platforms, climbing scaffolding, ladders and standing for long periods of time onboard a LCS ship or pier and be able to lift 50 lbs.