April 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Picatinny Arsenal, NJ2 days ago
May 13, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
New Providence, NJ7 days ago
Candidates should have prior technical experience with the commodities that we produce (Mascara, Lip-gloss, Lipstick, Nail Enamel packages, compacts, IBM and ISBM bottles, skin care jars and closures). · Review customer artwork and die lines, and work with the factories and customers to resolve technical issues or concerns, provide troubleshooting and problem solving as needed.
Parsippany, NJ30+ days ago
Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders or required by Federal, State, or local government contracts. The Engineering Manager leads day-to-day execution of mechanical design activities supporting ruggedized electronics packaging within the PAS business unit.
MANHATTAN, NY30+ days ago
p>The Office of Building Water System Oversight (BWSO) within the Bureau of Environmental Sciences and Engineering (ESE) is responsible for conducting inspections to ensure compliance with various rules and regulations aimed at improving the operating conditions of various engineered systems such as cooling towers, water tanks, evaporative condensers, internal plumbing, and wastewater systems in order to prevent risks associated with these systems. Special Note:
In addition to above qualification requirements, to be eligible for placement in Assignment Levels II and III, individuals must have at least one year within the last three years of experience as a major contributor or a project leader on a complex project requiring additional and specific expertise in the disciplines needed to design or construct the project.
li>Prepare mechanical engineering designs, drawings, As-Builts, systems specifications, equipment lists, general arrangements, aux power demands, and process flow diagrams (PFDs) and procurement packages for equipment/components, technical bid evaluation from vendors, and vendor selection. Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence.
Our staff leads the power markets engineering process and collaborates with Kiewit's construction teams to approach construction-driven engineering with a focus on safe, cost-effective, and innovative designs that achieve client expectations and further Kiewit's legacy of excellence. Develop mechanical piping and instrument diagrams (P&IDs) for power plant systems including steam cycles, boiler feed, condensate, water treatment, flue gas, hydrogen, fuel handling, heat transfer systems, and utility systems.
Parsippany, NJ15 days ago
Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. Applicant should have a background in Mechanical Test Equipment Engineering, and possess a demonstrated ability in designing, developing, integrating, and deploying Special & Peculiar Automated Test Equipment.
Parsippany, NJ29 days ago
Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. Applicant should have a background in Mechanical Test Equipment Engineering, and possess a demonstrated ability in designing, developing, integrating, and deploying Special & Peculiar Automated Test Equipment.
li>Demonstrated experience designing and qualifying electronics packing for weapons systems using military environmental safety and EMIE3 frameworks, including MIL-STD-202, 810, 461, 464, 331, 125, 019, 012, 105, 216, 9. Collaborate and effectively communicate with cross-functional product teams, including RF/Electrical Engineering, Test Engineering, Manufacturing, Quality Engineering, Supply chain management, and Procurement as part of your daily activities.
p>Our automation and control solutions for homes and buildings allow our clients to control entire environments with the push of a button, integrating systems such as Audio Visual, Lighting, Shading, Security, Building Management Systems and HVAC to provide greater comfort, convenience and security. Lead packaging sustainability strategy development and execution by researching emerging materials and technologies, developing strategic roadmaps, identify and develop strategic packaging vendors, and contributing to the company's annual sustainability report.
Participate in verifying the characteristics of a site and providing technical assistance on various engineering, design, and construction issues relating to automatic temperature control systems and specifications, air distribution (supply, return, exhaust), hydronic systems (chilled water, heating water, etc.), and plumbing systems (domestic water, waste, vent, storm, etc.). Work as an individual or as part of a cross-functional team of engineers, planners, and scientific professionals to execute project work, assist with laying out installation of equipment, calculating costs and quantities of material/equipment/labor, and ensuring project work conforms with specifications, permit applications, schematics, compliance documentation, and regulatory and technical analysis memos.
New York, New York30+ days ago
Serve as the technical interface between internal teams and external consultants, keeping designs aligned with Fluidstack's high-density cooling and power requirements. Own mechanical systems end to end for AI-optimized, high-density data centers, from early concept and analytical modeling through final build and deployment.
We work with a human-first approach to flexibility, giving Nscalers the autonomy to deliver in a way that works for their lives while staying closely connected to a high-performing remote-first team. Support early-stage site screening by defining mechanical utility and constructability requirements, including cooling approach, water strategy, heat rejection constraints, climate considerations, and expansion capacity.
Our mechanical, electrical, plumbing, fire protection, controls, telecommunications, and security building system designs keep many of the world's top Fortune 100 financial, technology, enterprise, hyperscale, and colocation companies up and running 24 hours a day, 365 days a year. As an AVP Mechanical Engineer with us, you will design complex cooling and HVAC systems, including air distribution systems, chiller plants, and alternative energy solutions while leading projects and a team of mechanical engineers.
You will work closely with industry-leading partners, including Caterpillar and NVIDIA, on projects such as our 2+ GW Monarch Compute Campus, helping shape the mechanical engineering function as Nscale Energy and Power scales. We are seeking a Director, Mechanical Engineering to help lead Nscale Energy and Power as we develop behind-the-meter and islanded microgrid generation assets that provide prime power for world-scale, mission-critical AI infrastructure.
Participate in verifying the characteristics of a site and providing technical assistance on various engineering, design, and construction issues relating to automatic temperature control systems and specifications, air distribution (supply, return, exhaust), hydronic systems (chilled water, heating water, etc.), and plumbing systems (domestic water, waste, vent, storm, etc.). Work as an individual or as part of a cross-functional team of engineers, planners, and scientific professionals to execute project work, assist with laying out installation of equipment, calculating costs and quantities of material/equipment/labor, and ensuring project work conforms with specifications, permit applications, schematics, compliance documentation, and regulatory and technical analysis memos.
With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
The technician performs hands-on technical work related to assembly inspection refurbishment testing and documentation of medium-caliber weapon systems including the M230 M242 XM813 XM913 XM914 XM915 and associated components. Assist with loading transport and accountability of inert weapon componentstest articles per DA Pam 710-2-1.Support engineering staff during developmental qualification and endurance testing on and off site.
Draft sketches, piping and instrument diagrams (P&IDs), plans, sections and details, drawings, equipment layout, and design/model in 3D for power plant systems which could include: steam cycle systems, boiler feed and condensate, water treatment, fuel handling, hydraulic, heat transfer systems, conveying systems, rotating equipment (generators) systems, and Balance of plant systems (compressed air and gas systems, service water, HVAC). Experience designing and modeling piping and equipment layouts in the Power market (power generation - thermal, hydroelectric, wind/solar, geothermal) highly desired but will consider candidates with strong mechanical design skills in other Industrial processing markets, or.
p>Under the supervision of the Mechanical Engineering (ME) Manager for Student Success and ME Associate Department Chair for Graduate Studies, the Graduate Academic Advisor position will provide academic advising for graduate students majoring in mechanical engineering programs and assist with related academic administrative matters. Ability to work independently to produce high-quality work, staying abreast of complex curricular information, policies, and procedures while organizing multiple tasks and setting priorities for action and meeting deadlines in a fast[1]paced office environment.
li>Exhibit potential for impactful scholarly work in one or more of the targeted areas: Solid Mechanics & Mechanical Systems, Thermal/Fluids Engineering, or relevant emerging interdisciplinary fields. The mission of the University is to provide a dynamic student-centered educational experience that prepares graduates for lives of personal development, professional success, civic engagement, and service to their fellow human beings.
p>Within these core domains, we are particularly interested in applicants whose work intersects with one or more emerging areas, including Artificial Intelligence, Data-Driven Engineering Systems, Sustainable Building Systems, Energy Infrastructure, Mechatronics, Intelligent Systems, Aerospace Propulsion, and Space Systems. The mission of the University is to provide a dynamic student-centered educational experience that prepares graduates for lives of personal development, professional success, civic engagement, and service to their fellow human beings.
You'll work side-by-side with mentors and peers who champion integrity and teamwork, because we know collaboration drives better outcomes - and you won't just apply your engineering skills, you'll also embrace the mindset of a consultant. From the moment you join our team, you'll be surrounded by experienced engineering consultants, project managers, and subject matter experts who are committed to excellence and innovation.
p>Please be aware that certain positions may require the applicant to either 1) be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or 2) be eligible to obtain an export control license or license exception from the Bureau of Industry and Science & U.S. Department of Commerce. This role requires a strategic thinker with deep technical expertise, strong leadership skills, and the ability to drive cross-functional collaboration across global teams.
Kearny, New Jersey30+ days ago
You will build and lead an integrated team drawing from disciplines including mechanical design, structural and stress analysis, thermal/fluids analysis, materials engineering, manufacturing and fabrication engineering, nuclear engineering, and vacuum systems engineering. Deep technical knowledge of at least two of the following: structural analysis, thermal-hydraulic analysis, vacuum system design, cryogenic engineering, nuclear engineering, high-heat-flux component design, manufacturing engineering.
Franklin Lakes, NJ30+ days ago
Interface with engineering teams to support experimental designs and perform testing of experimentally produced products as required. We are seeking a dedicated and experienced professional to contribute to our cutting-edge projects and help shape the future of mechanical engineering.
p>Please be aware that certain positions may require the applicant to either 1) be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or 2) be eligible to obtain an export control license or license exception from the Bureau of Industry and Science & U.S. Department of Commerce. Experience with implementation of high-speed serial buses and Fabrics (SAS/SATA, PCIe, InfiniBand, Fibre Channel, Ethernet, etc.), high speed Memory Busses (DDR4/DDR5, HBM), and Processor/Accelerator Cache Coherent Links (CXL).
li>If applying to a vacancy opened Status and you are requesting consideration under Veterans Employment Opportunity Act (VEOA) (https://www.fedshirevets.gov/job/shav/#veoa), you need to provide a copy of your last DD214 (member-4 copy), which verifies your military service dates, reason for separation, OR certification of separation that shows a discharge date within 120 days of the closing of this announcement, and eligibility for consideration under the Veterans Employment Opportunity Act. NON-COMPETITIVE APPLICANTS: If requesting concurrent consideration for Non-competitive (NC) appointment eligibility, you must provide the appropriate SPECIAL APPOINTING AUTHORITY DOCUMENTS, such as PCS orders (military spouse) describing move & marriage certificate; letter from VA or DD214 describing 100% disability of spouse; letter from State Vocational Office certifying disability (schedule A), etc.
p>Location: Valhalla, NY Category: Teaching Faculty Positions Job Type: Full-time Posted On: Tue Mar 31 2026 Job Description: The Engineering Department at Westchester Community College has a tenure-track opening for an Instructor of Engineering in Mechanical Technology. Courses offered in Mechanical Technology in our department include: CAD (AutoCAD & Inventor), Manufacturing (both conventional and CNC), Manufacturing Processes, Thermodynamics, Mechanisms, Fluids, Statics, Dynamics, with an emphasis on .
Murray Hill, NJ30+ days ago
Lead development of customer and project specific documentation for the project; installation drawings, risk assessment/HAZOPs, Pre-Startup Safety Reviews (PSSR), commissioning procedures, customer presentations/progress reports, customer turnover manual, Lessons Learned/project close-out reports, etc. Messer is the world's largest privately held industrial gases company and what we do matters because it is woven into every part of life, from the medical gases that patients rely on to the essential elements needed to safely and sustainably produce the goods our communities depend on.
Picatinny Arsenal, NJ29 days ago
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. Related curriculum - Successful completion of a curriculum leading to a bachelors degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.
Bridgewater, NJ30+ days ago
p>Typical tasks and deliverables that are executed by or under the supervision of the Mechanical Engineer V include: • Site selection • Master planning • Commissioning and startup • Load calculations • Utility assessments • Energy modeling • Design reports • Code evaluations • Plans • P&IDs • Schedules • HAZOP reviews • Installation details • Equipment and system selection and specification • Coordination with manufacturers and trade partners. The Senior Lead oversees the Mechanical discipline scope of work and manages the discipline budget on all project phases, sizes, and levels of complexity, and directs and manages the workflows and execution of design and engineering support staff (Entry-Level to Senior) to meet client expectations and project goals.
Spring Valley, NY30+ days ago
CHA Consulting, Inc. is seeking an Entry Level Mechanical Engineer to join our Gas Team at a client site in Spring Valley, NY, where you will contribute to the development of resilient, forward-thinking gas infrastructure. Discover our innovative projects and commitment to grid reliability and regulatory compliance by visiting: https://www.chasolutions.com/solutions/grid-resiliency-energy-transition-solutions/.
Most of the work will be related to heating, ventilation and Air Conditioning (HVAC); however, the candidate should also expect work in industrial piping, plumbing, central utility plants, compressed air systems, chilled water systems, steam systems, and fire protection. Founded in Denmark, Ramboll is a people company that has over 2,000 experts working across more than 60 offices in the Americas applying their passion to deliver innovative solutions across Buildings, Transport, Energy, Environment & Health, Water, Management Consulting, and Architecture and Landscape.
Bridgewater, NJ30+ days ago
Typical tasks and deliverables that are executed by or under the supervision of the Senior Lead include site selection, master planning, commissioning and startup, load calculations, utility assessments, energy modeling, design reports, code evaluations, plans, P&IDs, schedules, HAZOP reviews, installation details, equipment and system selection and specification, and coordination with manufacturers and trade partners. They oversee the Mechanical discipline scope of work and manages the discipline budget on all project phases, sizes and levels of complexity, and directs and manages the workflows and execution of design and engineering support staff (Entry-Level to Senior) to meet client expectations and project goals.
Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day.
What you'll be doing: Lead the design and development of HVAC and mechanical systems for commercial, institutional, healthcare, and public-sector projects Perform and oversee load calculations, system sizing, equipment selection, and energy analysis Prepare and review drawings, specifications, and construction documents Manage projects from concept through construction, including scope, schedule, and budget control Coordinate with architectural clients, structural, electrical, and plumbing teams to ensure integrated design solutions Serve as the primary technical point of contact for clients and support business development efforts Provide mentorship and technical guidance to junior engineers and designers Support construction phase services, including submittal reviews, RFIs, and field coordination What you'll bring: Bachelor's degree in Mechanical Engineering or related discipline Professional Engineer (PE) license preferred (or ability to obtain) 8-15+ years of experience in HVAC/mechanical systems design Demonstrated experience in project management and client interaction Strong knowledge of ASHRAE guidelines, NYS Building Code, and energy codes Experience with AutoCAD and/or Revit (BIM) design platforms Strong communication, leadership, and organizational skills Requirements Maintain a valid driver's license with a clean motor vehicle report (MVR) for final consideration Read, write, and unders Any staffing/employment agency, person, or entity that submits an unsolicited resume to this site does so with the understanding that the applicant's resume will become the property of GPI and has the right to hire that applicant at its discretion and without any fee owed to the submitting staffing/employment agency, person or entity.
p>For the test, debug, and maintenance of instruments, the employee may be expected to inspect, probe, wire, install and uninstall components which requires frequent use of hands and arms, standing, reaching, bending, crouching, and occasionally lifting/carrying weights up to 25 pounds. Perform testing, simulations, and validation of the integrated systems on computer-aided design (CAD) software to model system behavior and required performance.
p>Work as an individual or as part of a cross-functional team of engineers, planners, and scientific professionals to execute project work on multiple concurrent projects, assist with laying out installation of equipment, calculating costs and quantities of material/equipment/labor, and ensuring project work conforms with specifications, permit applications, schematics, compliance documentation, and regulatory and technical analysis memos. Developed critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, load calculations, statistical analysis, and arriving at the most effective, economical, and logical solution.
New York, New York30+ days ago
Individuals seeking employment at Thornton Tomasetti are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. An independent organization of creative thinkers and innovative doers collaborating from offices worldwide, our mission is to bring our clients' ideas to life and, in the process, lay the groundwork for a better, more resilient future.
p>In this role, you will support and review mechanical engineering deliverables related to rail and transit systems such as mechanical components of rolling stock, station and tunnel systems, maintenance and yard facilities equipment, and associated site or systems infrastructure. Job Description:
Parsons is seeking an Entry-Level Mechanical Engineer interested in supporting rail and transit projects, including retrofits, upgrades, and capital improvement programs for rail systems and transit infrastructure.