Mechanical Engineer, Fluid Systems Design & Build Space Exploration Technologies CorpMechanical Engineer, Fluid Systems Design & BuildMcGregor, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. From thousands of gallons per minute of cryogens to tens of pounds per second of high-pressure gas, we develop clever solutions to meet the needs of a demanding test program both today and in the future.
Mechanical Engineer, Test Hardware Fabrication Space Exploration Technologies CorpMechanical Engineer, Test Hardware FabricationMcGregor, TXAttend design reviews and provide feedback to engineering partners to help expedite the fabrication/build schedule, specifically focusing on the design-for-manufacturability, lift planning, and build sequencing for detailed parts and large assemblies. RESPONSIBILITIES: Design and implement tooling and fabrication aids for a wide range of structural, mechanical, and fluid projects focused on increasing build safety, accelerating fabrication timelines, improving quality, and ensuring the as-built product meets engineering requirements.
Mechanical Engineer II Firefly Aerospace IncMechanical Engineer IITXAs a Mechanical Ground Support Equipment (GSE) Design Engineer, you will have the opportunity to leverage your creative background and expertise to help develop Fireflys next generation of launch sites, test stands, and material handling equipment, supporting Fireflys entire fleet of launch vehicles and spacecraft. A great Mechanical GSE Design Engineer 1) loves to solve clean sheet mechanical design problems using first principles of engineering 2) is capable of looking at challenging problems from the 30,000 foot view and the 1 inch view and 3) loves bringing the hardware they designed to life.
NewMechanical Engineer – Fort Hood Accura EngineeringMechanical Engineer – Fort HoodFort Hood, TexasMechanical Engineer- Fort Hood ***Work Location: Fort Hood, TX*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Position Summary The Mechanical Engineer will provide engineering and commissioning support for federal construction projects at Fort Hood, Texas. The selected candidate will be responsible for reviewing technical aspects of design and construction activities, evaluating mechanical systems, supporting commissioning efforts, reviewing project documentation, and ensuring compliance with contract requirements, codes, and project objectives throughout all phases of construction.
Mechanical Engineer II Firefly AerospaceMechanical Engineer IIBriggs, TXAs a Mechanical Ground Support Equipment (GSE) Design Engineer, you will have the opportunity to leverage your creative background and expertise to help develop Firefly’s next generation of launch sites, test stands, and material handling equipment, supporting Firefly’s entire fleet of launch vehicles and spacecraft. A great Mechanical GSE Design Engineer 1) loves to solve clean sheet mechanical & structural design problems using first principles of engineering 2) loves the challenge of bringing hardware to life and 3) thrives when there is a balance of collaboration and independent work.
Junior Mechanical Engineer Texas Hydraulic IncJunior Mechanical EngineerTemple, TXVAVE / Continuous Improvement - Demonstrates awareness of value engineering principles; identifies cost and performance trade-offs; participates in or leads structured improvement projects using data-driven approaches. Product Development & Sustaining - Experience supporting product lifecycle activities including design changes, specification updates, and engineering change management; takes ownership of assigned deliverables.
NewHands-On Mechanical Engineer: Design, Test & Improve AdeccoHands-On Mechanical Engineer: Design, Test & ImproveTemple, TXThe ideal candidate will support product design initiatives, create and revise 3D models, and collaborate with various teams to enhance product performance and reliability. Adecco is partnering with a well-established industrial manufacturer to add a Mechanical Engineer to its team in Temple, Texas.
NewMechanical Engineer AdeccoMechanical EngineerTemple, TXKey Responsibilities:Support product design and engineering change initiativesCreate and revise 3D models, drawings, and engineering documentationAssist with root cause investigations and corrective actionsParticipate in product testing, validation, and data analysisCollaborate with manufacturing, quality, and supply chain teams to improve product performance and reliabilitySupport cost reduction and continuous improvement projectsReview technical requirements and engineering specificationsWhat We're Looking For:Bachelor's degree in Mechanical Engineering or related field1–3 years of engineering experience (internships/co‑ops considered)Experience with CAD software such as Creo, SolidWorks, Inventor, or similarStrong mechanical aptitude and problem‑solving skillsComfortable working in both office and manufacturing environmentsAbility to manage multiple projects and prioritiesNice to Have:Experience with industrial equipment, mobile equipment, fluid power, heavy machinery, or manufacturing environmentsExposure to testing, failure analysis, or product validationUnderstanding of GD&T, engineering drawings, and manufacturing processes#J-18808-Ljbffr. You'll work closely with senior engineers and cross-functional teams to support existing products while contributing to future design enhancements.
NewJunior Mechanical Engineer: VAVE & Hydraulic Design Texas HydraulicsJunior Mechanical Engineer: VAVE & Hydraulic DesignTemple, TXTexas Hydraulics, Inc. based in Temple, Texas is seeking an Mechanical Engineer to lead value engineering projects aimed at reducing costs while maintaining product integrity. The role involves analyzing existing product lines and implementing design changes through teamwork with Supply Chain, Manufacturing, and Quality departments.
NewJunior Mechanical Engineer Texas HydraulicsJunior Mechanical EngineerTemple, TXExperienceVAVE / Continuous Improvement – Demonstrates awareness of value engineering principles; identifies cost and performance trade‑offs; participates in or leads structured improvement projects using data‑driven approaches. Computer Skills – Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint); working knowledge of CAD (CREO preferred), PLM (Windchill preferred), and project management tools.#J-18808-Ljbffr.
New Graduate Engineer, Mechanical Space Exploration Technologies CorpNew Graduate Engineer, MechanicalMcGregor, TXSome engineering groups design, build, activate, modify, and maintain the fluid and mechanical systems that power, restrain, and measure the most powerful high-volume rocket engines in the world, while others specialize in the design and execution of unique tests for engines, components, and spacecraft on an accelerated schedule. We are looking for engineers who focus on testing operations (test set-up, on-console running tests, data analysis, troubleshooting, etc.) as well as ground support equipment operations (design & build test stands, propellant disbursement, etc.).
Director, Propulsion Engineering Firefly Aerospace IncDirector, Propulsion EngineeringTXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. The scope of the propulsion engineering department spans launch vehicle engines, spacecraft propulsion, vehicle fluid systems, valve design, and propulsion analysis teams.
Development Test Technician Mechanical Space Exploration Technologies CorpDevelopment Test Technician MechanicalMcGregor, TXPREferred SKILLS AND EXPERIENCE: Airframe and Powerplant Mechanic (A&P) license Experience in airframe structural repair Experience in aviation electronics and avionics Society of Automotive Engineers (SAE) certification or training Experience with the testing process and optimization of test processes Experience with hydraulic plumbing repair/fabrication Experience in ground support equipment in the aerospace industry Experience in the space exploration industry, aviation, military, or other high-reliability operating environment Basic computer skills, including experience using Microsoft Office and photo generation/compilation Knowledge of vacuum systems Knowledge of all types of bore scope inspection equipment Knowledge of different fittings such as NPT, MS, AN, and Swagelok A demonstrated ability to read/understand technical manuals and reports Ability to read, and understand operating system schematics and drawings Use of precision measuring instruments/equipment Communication skills for relaying data (verbally and in writing) between other employees and customers Experience with rigging, cranes, and lift operations Ability to work effectively in a team environment Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment Experience with analog and digital instrumentation (load cells, pressure transducers, strain gauges, RTDs, TCs, encoders, deflection gages, LVDTs, accelerometers, IMUs). Must be able to work in an environment requiring exposure to fumes, odors, noise, and hazardous environments Must be able to work in elevated PPE, including supplied air respirators and chemical-resistant self-encapsulating suits Must be available to work overtime, weekends, and rotating shifts as needed based on site operational needs; flexibility required Must be able to and available for travel (up to 20% of the time), including military and government installations.
Internship - Quality Engineering - Fall 2026 Firefly Aerospace IncInternship - Quality Engineering - Fall 2026TXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Our launch vehicles, lunar landers, and orbital vehicles provide government and commercial customers with full mission services from low Earth orbit to the surface of the Moon and beyond.
NewElectro-Mechanical Technician - Temple TX East Penn Manufacturing - Deka BatteriesElectro-Mechanical Technician - Temple TXTemple, TexasFull timeThe Electro-Mechanical Technician will be responsible for the assembly, installation, troubleshooting, maintenance, and repair of mechanical and electrical systems in machinery, equipment, and production lines. Our open-door management policy, comprehensive benefits package, annual bonus program for all, and career advancement opportunities are just some of the ways we show our employees how incredibly valued they are.
Mechanical Designer - Sheet Metal Control Panels USAMechanical Designer - Sheet MetalGeorgetown, TXFull timeGeneral Description of Job: This position is responsible for creating 3D sheet metal models, developing manufacturing drawings, and supporting CNC laser cutting and press brake operations. This position will be skilled in creating 3D sheet metal models, developing manufacturing drawings, and program CNC laser cutting and press brake machines.
Engineering Leader 1 M.C. Dean IncEngineering Leader 1Temple, TXEducation, Experience & Training: Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program with 7+ years of experience in any Engineering discipline with Construction experience OR. Master's Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program with 5+ years of experience in any Engineering discipline with Construction experience.
Internship - Quality Engineering - Fall 2026 Firefly AerospaceInternship - Quality Engineering - Fall 2026Briggs, TXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Our launch vehicles, lunar landers, and orbital vehicles provide government and commercial customers with full mission services from low Earth orbit to the surface of the Moon and beyond.
Mechanical Inspector II (Belton, TX) Stratasys LtdMechanical Inspector II (Belton, TX)Belton, TXAssist manufacturing departments in implementing quality systems such as: ISO 9001 and AS9100 internal and external monitoring; continuous process improvement; employee training. The world's leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.
Manager, Manufacturing Engineering Firefly Aerospace IncManager, Manufacturing EngineeringTXYou will be accountable for developing, optimizing, and scaling CNC machining processes for 3-, 4-, and 5-axis machines that produce critical components for Alpha, Eclipse launch vehicles and Blue Ghost and Elytra spacecraft. We utilize carbon composite structures, patented propulsion technologies, and common components across our vehicles to iterate quickly, improve reliability, and deliver payloads at a lower cost.
PROJECT MANAGER (ENGINEERING) City Of KilleenPROJECT MANAGER (ENGINEERING)Killeen, TXReviewing capital improvement project design and construction plans and specifications; cost estimates, schedule, bid packages; shop drawings, submittals, and material deliveries; requests for information; change orders, pay requests, and materials testing and inspection reports. Education and Experience: Bachelor's degree in construction management, civil engineering, environmental science or engineering, hydrologic science, engineering management, drafting and design, business management or related fields; and.
Manager, Manufacturing Engineering Firefly AerospaceManager, Manufacturing EngineeringBriggs, TXYou will be accountable for developing, optimizing, and scaling CNC machining processes for 3-, 4-, and 5-axis machines that produce critical components for Alpha, Eclipse launch vehicles and Blue Ghost and Elytra spacecraft. We utilize carbon composite structures, patented propulsion technologies, and common components across our vehicles to iterate quickly, improve reliability, and deliver payloads at a lower cost.
Engineering Project Manager - Military Services Group American Water Works Co IncEngineering Project Manager - Military Services GroupTXTypical projects include, but are not limited to, potable water wells, treatment facilities, storage tanks and water distribution systems along with sewage collection, pumping stations, septic systems and wastewater treatment facilities. Knowledge of engineering theory and practice related to planning, design, construction and operation of water/wastewater facilities, project management, water resources, engineering economics and utility operations.
Defense Field Engineering Rep (523829) HRU-TechDefense Field Engineering Rep (523829)Fort Hood, TexasThe role requires a working knowledge of all applicable vehicle subsystems and be capable of hands-on troubleshooting, issue diagnosis, and coordination of engineering resources to support mission success. Job Summary: The Senior Field Engineering Representative will provide on-site technical leadership and field engineering support for a single defense program.
Consultant Engineer Cenergistic, Inc.Consultant EngineerTemple, TXOur results are powered by the patented Opti-Commissioning process-combining equipment calibration, facilities monitoring, and behavioral change-and the Cenergistic Optimize platform, which applies artificial intelligence, predictive modeling, anomaly detection, and utility analytics across every meter and system. By aligning leadership, engaging staff, and applying proprietary technology and engineering expertise, Cenergistic has helped clients realize more than $7.3 billion in utility cost savings-typically 20-30 percent annually-with no capital investment and no compromise to comfort, safety, or performance.
Consultant Engineer CenergisticConsultant EngineerTemple, TexasBy aligning leadership, engaging staff, and applying proprietary technology and engineering expertise, Cenergistic has helped clients realize more than $7.3 billion in utility cost savings—typically 20–30 percent annually—with no capital investment and no compromise to comfort, safety, or performance. In this role, you will provide technical leadership, guide best practices, and serve as a senior engineering resource supporting energy conservation initiatives across commercial and institutional facilities.
NewTest Engineer, Battery Development Space Exploration Technologies CorpTest Engineer, Battery DevelopmentMcGregor, TXDesign, fabricate, operate and troubleshoot fluid and mechanical systems that include low to high-pressure gaseous working fluids and rocket propellants (including hypergols & cryogenics), test stand support structures, heat exchangers, vacuum pumps, tooling, and fluid components such as valves, reliefs, burst disks, tubing, etc. Familiarity with instrumentation and control components (pressure transducers, thermocouples, resistance temperature detectors (RTDs), strain gauges, accelerometers, flow meters, load cells, relays, solenoid, pneumatic valves).
Test Engineer Starship Development Space Exploration Technologies CorpTest Engineer Starship DevelopmentMcGregor, TXOperate and troubleshoot fluid and mechanical systems that include low to high-pressure gaseous working fluids and rocket propellants (including hypergols & cryogenics) as well as structural components and supporting infrastructure. Familiarity with instrumentation and control components (pressure transducers, thermocouples, resistance temperature detectors (RTDs), strain gauges, accelerometers, flow meters, load cells, relays, solenoid, pneumatic valves).
Test Engineer Dragon Space Exploration Technologies CorpTest Engineer DragonMcGregor, TXOperate and troubleshoot fluid and mechanical systems that include low-to-high-pressure gaseous working fluids and rocket propellants (including hypergols & cryogenics) as well as structural components and supporting infrastructure. Familiarity with instrumentation and control components (pressure transducers, thermocouples, resistance temperature detectors (RTDs), strain gauges, accelerometers, flow meters, load cells, relays, solenoids, pneumatic valves).
Quality Engineer II Composites Firefly Aerospace IncQuality Engineer II CompositesTXKey Responsibilities Include: Partner with design engineering and manufacturing teams through product development and production to create quality plans for flight products, including identification of key characteristics, development testing for functionality and manufacturability, first article and detailed inspection planning, and consideration of past failures and lessons learned. Knowledge of quality tools such as: • Lean principles • Measurement systems analysis • Design of experiments • Statistical process control • Root cause analysis and corrective action • Advanced product quality planning (APQP) • Metrology • Process failure mode and effects analysis (PFMEA) • Control plans • Various problem solving approaches.
Quality Engineer II Composites Firefly AerospaceQuality Engineer II CompositesBriggs, TXPartner with design engineering and manufacturing teams through product development and production to create quality plans for flight products, including identification of key characteristics, development testing for functionality and manufacturability, first article and detailed inspection planning, and consideration of past failures and lessons learned. Knowledge of quality tools such as Lean principles, measurement systems analysis, design of experiments, statistical process control, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches.
Composite M&P Engineer IV Firefly Aerospace IncComposite M&P Engineer IVTXProvide technical support for manufacturing and design teams in the areas of non-metallic material and processes selection and optimization, qualification, and inspection that impact product quality, reliability, durability, and capability. Broad technical understanding of several composite material processes and operations including, but not limited to, out-of-autoclave processes, composites and polymer joining and surface engineering for aerospace applications.
AFP Manufacturing Engineer II-Composites Firefly Aerospace IncAFP Manufacturing Engineer II-CompositesTXOversee the development AFP ply programs for composite parts using Ingersoll Gen2, (VCP) Vericut Composite Programming, and (VCS) Vericut Composite Simulation programming tools and simulation software, ensuring conformance to design intent and manufacturing constraints. This role supports production and engineering by generating precise ply programs, improving part quality, reducing cycle time, and troubleshooting AFP-related issues in the manufacture of complex aerospace components.
Test Engineer Falcon Test Space Exploration Technologies CorpTest Engineer Falcon TestMcGregor, TXHigh level of familiarity with instrumentation and control (programmable logic control, high speed data acquisition, pressure transducers, thermocouples, RTDs, strain gauges, accelerometers, flow meters, load cells, relays, solenoid valves). ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Facilities Engineer, MEP Space Exploration Technologies CorpFacilities Engineer, MEPMcGregor, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. PREFERRED SKILLS AND EXPERIENCE: Primary experience with electrical and power distribution systems (Knowledge of HVAC operation and design principles including refrigeration, chillers, boilers, and air handling equipment.
Fluids GSE Design Engineer II Firefly Aerospace IncFluids GSE Design Engineer IITXDesign of ground fluid systems includes developing P&IDs, tube & pipe sizing calculations for cryogenic, multiphase, compressible & incompressible fluids, valve/fitting/component specification and selection, design for critical safety equipment, basic control philosophy for system modifications, pipe & equipment coating & insulation specification and more. As a Fluids Ground Support Equipment (FGSE) Design Engineer, you will have the opportunity to leverage your creative background and expertise to help develop Fireflys next generation of launch sites, test stands, and production equipment supporting Fireflys entire fleet of launch vehicles and spacecraft.
Propulsion Test Engineer - Spacecraft StratAcuity Staffing Partners IncPropulsion Test Engineer - SpacecraftTX$140,000–$150,000 / yearIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.
Fluids Design Engineer III (GSE) StratAcuity Staffing Partners IncFluids Design Engineer III (GSE)TX$129,000–$130,000 / yearIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. The companys launch vehicles, lunar landers, and orbital vehicles provide government and commercial customers with full mission services from low Earth orbit to the surface of the Moon and beyond.
Propulsion Engineer Raptor Test Space Exploration Technologies CorpPropulsion Engineer Raptor TestMcGregor, TXPREFERRED SKILLS AND EXPERIENCE: • Master's degree in Mechanical or Aerospace Engineering or equivalent experience • Experience in production and test systems • Hands on test and production facility, factory, or laboratory experience • Mechanical aptitude and experience • Demonstrated experience where quick-thinking and problem solving plays a critical role • Knowledge and/or experience in aerospace structural or mechanical or propulsion systems assembly and testing • Ability to utilize test instrumentation and control components: pressure transducers, thermocouples, RTDs, strain gauges, accelerometers, flow meters, load cells, relays, solenoid valves • Ability to solve problems calling for technical analysis • Ability to read and understand technical manuals and reports • Ability to read and understand mechanical and electrical schematics • Knowledge of hazardous systems- cryogenic, flammable, hypergolic, pyrophoric • Knowledge of high pressure system design and handling • Experience using test instrumentation and control components • Windows Operating Systems, Intermediate skill level • Microsoft Office (Excel, PowerPoint, Word, Outlook, OneNote), Intermediate skill level • CAD modeling (Unigraphics NX preferred) and Teamcenter, Novice skill level • Programming Languages (Python, C/C++, SQL), Novice-Intermediate skill level. • Operate and troubleshoot fluid and mechanical systems that include low to high-pressure gaseous working fluids and rocket propellants (including high pressure nitrogen and methane systems & cryogenics) as well as structural components and supporting infrastructure.
Manufacturing Engineer III-Composites Firefly Aerospace IncManufacturing Engineer III-CompositesTXYou will be responsible for developing tooling and fixtures for development programs as well as production programs, driving continuous improvement initiatives, optimizing processes, developing brand new processes, and providing technical expertise to enhance our production capabilities. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Tooling Engineer III-Composites Firefly Aerospace IncTooling Engineer III-CompositesTXIn this hands-on role, you will work closely with cross-functional teams to deliver high-quality, cost-effective tooling solutions that enable product development, streamline manufacturing processes, and support continuous improvement initiatives. Our small- to medium-lift launch vehicles, lunar landers, and orbital vehicles allow us to service the entire lifecycle of government and commercial missions from low Earth orbit to the Moon and beyond.
Composite M&P Engineer IV Firefly AerospaceComposite M&P Engineer IVBriggs, TXProvide technical support for manufacturing and design teams in the areas of non-metallic material and processes selection and optimization, qualification, and inspection that impact product quality, reliability, durability, and capability. Broad technical understanding of several composite material processes and operations including, but not limited to, out-of-autoclave processes, composites and polymer joining and surface engineering for aerospace applications.
AFP Manufacturing Engineer II-Composites Firefly AerospaceAFP Manufacturing Engineer II-CompositesBriggs, TXOversee the development AFP ply programs for composite parts using Ingersoll Gen2, (VCP) Vericut Composite Programming, and (VCS) Vericut Composite Simulation programming tools and simulation software, ensuring conformance to design intent and manufacturing constraints. This role supports production and engineering by generating precise ply programs, improving part quality, reducing cycle time, and troubleshooting AFP-related issues in the manufacture of complex aerospace components.
Fluids GSE Design Engineer II Firefly AerospaceFluids GSE Design Engineer IIBriggs, TXDesign of ground fluid systems includes developing P&IDs, tube & pipe sizing calculations for cryogenic, multiphase, compressible & incompressible fluids, valve/fitting/component specification and selection, design for critical safety equipment, basic control philosophy for system modifications, pipe & equipment coating & insulation specification and more. As a Fluids Ground Support Equipment (FGSE) Design Engineer, you will have the opportunity to leverage your creative background and expertise to help develop Firefly’s next generation of launch sites, test stands, and production equipment supporting Firefly’s entire fleet of launch vehicles and spacecraft.
Design Engineer II StratAcuity Staffing Partners IncDesign Engineer IITX$95,000–$110,000 / yearIn terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Inventory Control Clerk - 2nd Shift Space Exploration Technologies CorpInventory Control Clerk - 2nd ShiftMcGregor, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This position will help ensure that incoming materials are received correctly, the onsite inventory is accurate, and our technicians and engineers have what they need to achieve our overall mission of sending humans to Mars.
NewInventory Control Clerk Space Exploration Technologies CorpInventory Control ClerkMcGregor, TXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This position will help ensure that incoming materials are received correctly, the onsite inventory is accurate, and our technicians and engineers have what they need to achieve our overall mission of sending humans to Mars.
Propulsion Test Engineer - Spacecraft Firefly Aerospace IncPropulsion Test Engineer - SpacecraftBriggs, TXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. This role is for a hands-on test professional with proven expertise in liquid propulsion testing who can lead complex test campaigns and drive operational excellence in our hypergolic test programs.
Test Engineer IV (Propulsion) Firefly Aerospace IncTest Engineer IV (Propulsion)TXTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. This role is for a hands-on test professional with proven expertise in liquid propulsion testing who can lead complex test campaigns and drive operational excellence in our hypergolic test programs.
Tooling Engineer III-Composites Firefly AerospaceTooling Engineer III-CompositesBriggs, TXIn this hands-on role, you will work closely with cross-functional teams to deliver high-quality, cost-effective tooling solutions that enable product development, streamline manufacturing processes, and support continuous improvement initiatives. Our small- to medium-lift launch vehicles, lunar landers, and orbital vehicles allow us to service the entire lifecycle of government and commercial missions from low Earth orbit to the Moon and beyond.