Compartment Integration Design Engineer GMCompartment Integration Design EngineerWarren, MichiganThe ideal candidate brings strong technical judgment, creativity, and initiative, along with a passion for automotive design and the ability to balance customer needs, engineering requirements, and design intent. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.) .
Studio Design Engineer GMStudio Design EngineerWarren, MichiganThe ideal candidate brings a passion for the automotive industry, strong technical judgment, creativity, and initiative, along with the ability to balance customer needs, engineering requirements, and design intent. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.) .
Software and Controls Engineer – GM Defense GMSoftware and Controls Engineer – GM DefenseMilford, MichiganThis is a fast-paced role where you will operate with independence to impact compressed-timeline programs—such as developing in-house controls solutions (like custom Vehicle Interface Modules) and optimizing system performance across complex electrical architectures. Work collaboratively with systems integration engineers and technical leads to implement control algorithms for propulsion, chassis, and other complex systems into existing or new supervisory controls.
Virtual Propulsion Analysis Engineer - GM Defense GMVirtual Propulsion Analysis Engineer - GM DefenseWarren, MichiganVirtual Propulsion Analysis Engineer for GM Defense is responsible for applying advanced analysis and simulation tools to support propulsion system architecture development, with emphasis on optimizing energy consumption (EV range/fuel economy) and performance. Collaborate effectively with cross-functional partners (Design, DREs, Validation, Architects, suppliers, IT, and other CAE teams) to define requirements, integrate models, and ensure system-level performance is achieved.
NewSenior Robotics Data Engineer/Data Scientist GMSenior Robotics Data Engineer/Data ScientistWarren, Michigan$125,000–$168,650 / yearYou will work across data engineering, applied data science, and production software to turn raw robotics data into trusted systems that support analytics, model development, operational insights, and continuous improvement. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.
Install Engineer GMInstall EngineerWarren, MichiganExecution Engineers act as the primary technical interface for installation suppliers, oversee union trades, develop installation requirements, manage project finances and schedules, and ensure all installation activities align with GM engineering specifications and documented processes. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc).
Lead Software and Controls Engineer – GM Defense GMLead Software and Controls Engineer – GM DefenseMilford, MichiganThis is a fast-paced role where you will operate with a high level of independent judgment to immediately impact compressed-timeline programs—such as developing in-house controls solutions (like custom Vehicle Interface Modules) and optimizing system performance across complex electrical architectures. Reporting to the EGM of Electrical Systems, Controls, and Software (ESCS) team, you will be hands-on in writing code and integrating requirements specific to GM Defense platforms while providing technical leadership.
Automotive HIL Engineer Car Maker ICONMA, LLCAutomotive HIL Engineer Car MakerDearborn, MI$34.29 / hourDevelop chassis (brakes, steering, suspension) control algorithms for advanced chassis systems to deliver vehicle attributes, including control architecture selection, algorithm simulation, implementation, and verification and validation via leveraging a combination of model-in-the-loop (MIL), software-in-the-loop (SIL), hardware-in-the-loop (HIL) and vehicle test environment. The Hardware in the Loop (HiL) Engineer supports the product development and system integration processes by developing test procedures for automated execution, implementing tests using Hardware in the Loop equipment, documenting and reviewing execution reports, reporting incidents, and tracking software updates to fix issues.
Thermal CAE Engineer - GM Defense GMThermal CAE Engineer - GM DefenseWarren, MichiganThermal CAE Engineer will be responsible for capturing information from a variety of sources inside and outside of GM Defense, building and running analytical models, interpreting results for customers, attending development team meetings, interacting with compartment integration teams and help to drive the design that meets internal and external requirements. Mathematical modeling and analysis of various subsystems of both conventional and electric vehicle powertrain using state-of-the-art analytical tools, including STAR-CCM+, MATLAB/Simulink and co-sim environments.
Product Engineer Astemo IndianaProduct EngineerFarmington Hills, MichiganWe are seeking a talented and self-motivated Product Engineer to lead the development and validation of automotive brake calipers and cast aluminum components. We don’t just accept difference—we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community.
Calibration Engineer – Electrification Battery Systems GMCalibration Engineer – Electrification Battery SystemsMilford, MichiganFour (4) years of experience with the following: Embedded Controls; Tools commonly used in calibration including INCA, Vehicle Spy, CRETA, MDA, Matlab, and Simulink; Hardware and Software-in-the-Loop Systems; and Vehicle Control System Integration and Debugging. REQUIREMENTS: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field of study and Four (4) years of experience as a Calibration Engineer, Mechanical Engineer, or related role.
NewDevelopment & Validation Engineer GMDevelopment & Validation EngineerWarren, MichiganRoughly 70% of the role is hands-on technical execution in the lab and with hardware, and 30% is strategy, leadership, and cross-functional coordination across Global Virtual Engineering (GVE), GPDV, safety, and program teams. The role owns planning and execution of TRP lab activities and ensures that results are tightly linked to the DFMEA, enabling risk-based prioritization for propulsion programs.
Future Program Execution Ergonomist or Senior Future Program Execution Ergonomist GMFuture Program Execution Ergonomist or Senior Future Program Execution ErgonomistWarren, MichiganServe as the subject matter expert in the field of ergonomics, supporting launch and pre-production manufacturing ergonomic activities for New & Major vehicle programs in Warren and our vehicle manufacturing sites across North America. Support manufacturing operations ergonomics by bringing current plant ergonomics issues to the appropriate design and manufacturing engineers for resolution in order to design our similar ergonomic concerns on future programs.
Senior Electrical Engineer (PE) DiClemente Siegel Design Inc.Senior Electrical Engineer (PE)Southfield, MIThis is an opportunity to take the lead on electrical design for power, lighting, and control systems—while shaping outcomes, influencing design strategy, and mentoring the next generation of engineering professionals within a firm known for decades of trusted partnerships and impactful building design. DiClemente Siegel Design Inc. , a veteran owned dynamic engineering and architectural firm, is on the lookout for Licensed Senior Electrical Engineers (P.E.) to become part of our Southfield, MI and Burton, MI offices.
Applications Engineer VenteonApplications EngineerRochester Hills, MIIf you are a high performer and would like to work for an equally high performing company and you think the above opportunity is appropriate for you, we invite you to submit your resume in Microsoft Word format to bray@venteon.com. At Venteon our talent acquisition team is proud to provide our clients with the most qualified Accounting & Finance, Engineering, IT and Administrative talent in the industry today.
Supplier Quality Engineer - Body Exterior - Bumpers, Fascias, Grilles GMSupplier Quality Engineer - Body Exterior - Bumpers, Fascias, GrillesWarren, MichiganIn this role, the SQE will work with suppliers to resolve manufacturing and quality issues, implement and monitor advanced quality planning systems, and provide technical support across launch, current production, and warranty-related activities for assigned exterior commodities. One or more years’ OEM or Tier 1 experience in automotive quality, manufacturing or engineering functions, including demonstrated experience and capability in any of the following areas: Statistical Problem Solving (Red X, DFSS, DMAIC).
NewQuality, Reliability & Durability (QRD) Engineer GMQuality, Reliability & Durability (QRD) EngineerWarren, MichiganThis role connects customer experience, data analytics and product engineering within Vehicle Software and Electronics Engineering Quality (VSEE Quality) to drive both short‑term containment and long‑term quality improvements across global vehicle programs. As a Quality, Reliability & Durability (QRD) Engineer at General Motors LLC, you will play a critical role in ensuring the highest levels of product quality, reliability, and durability for our vehicles.
Senior Calibration Technical Specialist - Active Chassis GMSenior Calibration Technical Specialist - Active ChassisMilford, MichiganCalibration Technical Specialists are responsible for indirectly leading a team of Active Chassis Calibration Engineers to produce high-quality, on-time deliverables for all vehicle programs using common methods, processes, and procedures. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.
Senior Sub System Lead Engineer - Engine Controls Development & Integration GMSenior Sub System Lead Engineer - Engine Controls Development & IntegrationWarren, MichiganBenefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. Create and maintain Features, Stories, and/or Change Requests to manage requirements and specifications of sub-systems using change management tools (e.g., IBM Rational Team Concert, Jira, etc.).
NewPrincipal Systems Engineer, Communications Hardware (Remote Eligible | Relocation Assistance Available) AxonPrincipal Systems Engineer, Communications Hardware (Remote Eligible | Relocation Assistance Available)Detroit, MIRemote$210,600–$242,100 / yearYou will partner closely with Electrical Engineering (EE), Radio Frequency (RF) Engineering, Software (SW) Engineering, and Mechanical Engineering (ME) leads to define system requirements, drive cross-functional design decisions, and ensure each subsystem comes together as a cohesive, production-ready device. Familiarity with relevant hardware design, simulation, testing, and lifecycle tools , such as Altium/Cadence, SolidWorks/Creo/NX, RF and electrical test equipment, thermal characterization tools, and PLM/BOM or requirements-management systems.