UNKNOWN

ADAPTED_NOW

YEAR

Read information, often in small print (drawings) - Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.

Job SummaryUnder minimal supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.Job DescriptionResponsibilities:<ul><li>Perform preventive maintenance, routine inspections, and ad-hoc repairs on assigned conveyors, automation, robotics and ancillary equipment as needed</li><li>Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line.</li><li>Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.</li><li>Mentor all maintenance personnel in developing appropriate skillsets and knowledge of equipment.</li><li>Assist maintenance mechanics in work that requires two people or when operational needs demand.</li><li>Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs.</li><li>Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.</li><li>Ability to certify on all industrial lift equipment. Pickers, Reaches, Skates, Booms, Scissor lifts, etc.</li><li>Oversee projects as assigned. Projects will include minor space renovations, inventory management, contractor oversight, and building efficiency improvements.</li><li>Oversee, inspect, and monitor the routine maintenance provided by junior engineers. Will also provide guidance and training as needed.</li></ul>Required Experience: Education<ul><li>High school diploma or equivalent</li></ul>Work Experience <ul><li>5 years of experience with conveyor, automation, or robotics equipment repair and maintenance</li></ul>Preferred Qualifications:<ul><li>Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.</li><li>Graduate of an apprenticeship program or hold current trade certification.</li><li>Fundamental understanding of machinery/equipment</li><li>Basic skill level in multiple computer software packages including Microsoft Excel</li><li>Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems -</li><li>Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).</li><li>Must be willing to learn new equipment as it is brought on-line.</li><li>Physical activities necessary to perform one or more essential functions of the position.</li><li>Ability to bend, twist, reach, push, lift for extended periods daily</li><li>Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs</li><li>Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week</li><li>Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head</li><li>Willing to operate material handling equipment (i.e. fork truck). - Write documents and reports using writing instruments and computers</li><li>Read information, often in small print (drawings) - Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards</li><li>Ability to work overtime and must be available for on-call requests as needed</li></ul>Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.The anticipated salary range for this position:$33.25 - $48.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold.Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please click <div><a href="https://digital.alight.com/medline" rel="nofollow">here</a></div>. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.We’re dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page <div><a href="https://www.medline.com/about-us/belonging/" rel="nofollow">here</a></div>.Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.

Medline Industries - Transportation & Operations

Maintenance Tech II

Adobe Flash

Analysis Skills

Automation

Carpentry

Computer Software

Computerized Maintenance Management System (CMMS)

Corrective Action

Diversity

Electrical Engineering

Equipment Maintenance/Repair

Equipment Safety

Forklift

Furniture Repair

HVAC

Identify Issues

Inventory Management

Leadership

Maintenance - Plumbing

Maintenance Services

Mechanical Engineering

Mechanical Maintenance

Mentoring

Microsoft Excel

On Call

Order Picking/Packing

People Management

Preventative Maintenance

Procedure Development

Programmable Logic Controller (PLC)

Project Tracking

Pumps

Record Keeping

Reporting Skills

Robotics

Safety Process

Safety/Work Safety

System Test

Test Equipment

Training/Teaching

Willing to Travel

cb_wl_jobs_master

Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs. Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards.

Job SummaryUnder limited supervision, set up, adjust, perform preventative maintenance, troubleshoot, repair, and maintain assigned equipment with responsibility for production and quality.Job DescriptionResponsibilities:<ul><li>Perform preventive maintenance and routine inspections on assigned conveyors, automation, robotics and ancillary equipment as needed.</li><li>Perform routine troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or more senior technicians as needed. Record all maintenance issues in maintenance log for each line.</li><li>Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate and maintain accurate records of all operating logs for fire pumps, generators, HVAC equipment, and other facility systems that are tested on a routine basis.</li><li>Perform root cause analysis of major downtime events.</li><li>Assist maintenance mechanics in work that requires two people or when operational needs demand.</li><li>Perform facility/building project work as assigned. Tasks include, but are not limited to, light bulb/ballast replacement, door repairs, furniture installation, ceiling tile replacement, carpentry duties, plumbing repairs and maintaining operation logs. ​Assemble and test equipment to verify correct operation and production. Analyze and record cause of production delays on daily production reports and initiate procedures to solve equipment malfunctions. Examine defects and analyze spoilage causes and, where possible, take corrective action and verify the corrective action has eliminated the problems.</li></ul>Required Experience: Education <ul><li>High school diploma or equivalent</li></ul>Work Experience <ul><li>3 year of experience with conveyor, automation, or robotics equipment repair and maintenance</li><li>Fundamental understanding of machinery/equipment</li><li>Basic skill level in multiple computer software packages including Microsoft Excel</li><li>Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems - Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).</li><li>Physical Abilities:- Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs</li><li>Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week.</li><li>Must be willing to learn new equipment as it is brought on-line.  </li><li>Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.</li><li>Willing to operate material handling equipment (i.e. fork truck).</li><li>Write documents and reports using writing instruments and computers</li><li>Read information, often in small print (drawings)</li><li>Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards</li><li>Willing to travel at least/up to 10% of the time for business purposes (within state and out of state).</li><li>Must be willing to work overtime as needed.</li></ul>Preferred Qualifications <ul><li>Associates Degree in Mechatronics, Electrical Engineering Technology, Mechanical Engineering Technology, HVAC, or equivalent.</li><li>Graduate of an apprenticeship program or hold current trade certification.</li><li>At least 3 years of experience in a building maintenance position servicing a facility larger than 75,000 square feet.</li></ul>Physical activities necessary to perform one or more essential functions of the position:<ul><li>Ability to bend, twist, reach, push, lift for extended periods daily - Frequently move, lift, carry supplies/equipment up to 50 lbs and may have to occasionally lift up to 75 lbs</li><li>Must be able to stand for minimum of 8 hours and up to 12 hours for up to 6 days a week</li><li>Ability to continuously ascend and descend from ladders and stairs, work at heights and/or from a ladder, work from a lying down position, work with your hands above your head.</li><li>Willing to operate material handling equipment (i.e. fork truck). - Write documents and reports using writing instruments and computers - Read information, often in small print (drawings)</li><li>Follow appropriate safety procedures such as Lock Out/Tag Out, Arc Flash, etc. and use Personal Protective Equipment (PPE) while maintaining equipment, and ensure a safe work environment by eliminating potential equipment safety hazards</li><li>Ability to work overtime and must be available for on-call requests as needed</li></ul>Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.The anticipated salary range for this position:$28.75 - $41.75 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold.Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For a more comprehensive list of our benefits please click <div><a href="https://digital.alight.com/medline" rel="nofollow">here</a></div>. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.We’re dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page <div><a href="https://www.medline.com/about-us/belonging/" rel="nofollow">here</a></div>.Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.

Maintenance Tech I

Property Maintenance

Root Cause Analysis

FEED

Throughout the day you coordinate with Machining, Welding, Purchasing, and Assembly, present design intent to teammates and clients, and keep multiple projects moving on schedule. In the morning, you translate customer requirements into clear mechanical concepts, producing models and drawings for complex machine assemblies.

<h2>Build the future of machinery with Erdman</h2>Erdman designs and builds automated industrial machinery for the window and door industry. We are a world-class leader in automation and system integration. Visionary thinking. Exceptional doing.<h3>A day in this role</h3>In the morning, you translate customer requirements into clear mechanical concepts, producing models and drawings for complex machine assemblies. Throughout the day you coordinate with Machining, Welding, Purchasing, and Assembly, present design intent to teammates and clients, and keep multiple projects moving on schedule. At times, you travel to customer facilities to observe manufacturing processes, validate assumptions, and refine automated solutions. You close the day documenting the build process and verifying design consistency across equipment.<h3>What you'll do</h3><ul><li>Develop designs and technical documentation for mechanical devices and equipment used in automated systems.</li><li>Own complete machine assemblies from concept through detailed design while adhering to company design procedures.</li><li>Engage directly with customers to clarify machinery requirements and define automated processes.</li><li>Prepare and deliver design presentations to internal teams and customers to confirm needs are met.</li><li>Track the progress of several pieces of equipment at once, ensuring uniform standards and accuracy.</li><li>Create clear documentation to support the machine build and assembly process.</li><li>Collaborate closely with Machining, Welding, Purchasing, and Assembly teams.</li><li>Occasional travel to customer sites to understand manufacturing concepts and processes.</li></ul><h3>What you'll bring</h3><ul><li>5+ years of relevant mechanical design experience.</li><li>Strong mechanical aptitude and advanced problem-solving skills.</li><li>Hands-on familiarity with industrial automated equipment, including gear reduction, servo systems, and VFD-driven motion.</li><li>Proficiency with Autodesk Inventor (or comparable 3D CAD).</li><li>Desirable: AutoCAD, macros, Visual Basic, and Excel.</li><li>Clear, confident communication; able to operate independently and as part of a team.</li><li>Calm under deadlines; machining and assembly know-how.</li><li>Proficiency in mechanical design/engineering and blueprint interpretation.</li></ul><h3>Tools & technologies</h3><ul><li>CAD software (Autodesk Inventor or similar; AutoCAD as a plus).</li></ul>

Erdman Automation & Design

Senior Automation Machinery Mechanical Designer

AutoCAD

Autodesk Inventor

Blueprints

CAD (Computer-Aided Design) Software

CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing)

Communication Skills

Design Services

Design Verification

Documentation

Machining

Manufacturing/Industrial Processes

Mechanical Design

Microsoft Visual Basic

Multitasking

Presentation/Verbal Skills

Problem Solving Skills

Purchasing/Procurement

Requirements Management

Servomechanism

Support Documentation

System Integration (SI)

Technical Writing

Technical/Engineering Design

Time Management

Variable Speed Drive (VSD)

Welding

100hires

Bachelor’s Degree in an engineering/technical discipline preferred (Mechanical Engineering, Manufacturing Engineering, Plastics Engineering, Industrial Engineering, etc.). Collaborate with customers, tooling suppliers, production, and quality teams to ensure new and existing products are launched on time, within budget, and in compliance with technical and quality requirements.

<div>Custom plastics molding/manufacturing company has an opening for a Project Engineer. Direct-hire position with competitive benefits- includes generous 401K match, health/dental, PTO, and more!Duties:<ul><li>Support the execution of custom plastic molding projects from concept to production</li><li>Collaborate with customers, tooling suppliers, production, and quality teams to ensure new and existing products are launched on time, within budget, and in compliance with technical and quality requirements</li><li>Review customer specifications, part drawings, and material requirements for manufacturability</li><li>Lead engineering of new product introduction (NPI), from design review through production approval</li><li>Support mold design reviews (Design for Manufacturing) and process development activities</li><li>Create part drawings using Solidworks</li><li>Establish and validate molding processes (including trials, sampling, and capability studies)</li><li>Interface with customers daily during project execution</li><li>Coordinate with suppliers on tooling, materials, and external processes</li></ul>Requirements:<ul><li>Bachelor’s Degree in an engineering/technical discipline preferred (Mechanical Engineering, Manufacturing Engineering, Plastics Engineering, Industrial Engineering, etc.)</li><li>3+ years of experience as a project manager / project engineer within a molding or fabrication manufacturing environment</li><li>Experience with custom molding and/or fabrication of plastics or metals preferred</li><li>Understanding of molding or fabrication processes, materials, and tooling</li><li>Strong experience reading/interpreting engineering drawings and specifications</li><li>Experience developing new product introduction (NPI) processes</li><li>CAD experience (Solidworks a plus)</li><li>Experience working with an ERP/MRP system</li><li>Strong Excel skills</li></ul>Salary: $100-120K</div>

1st St. NW Technical Staffing

Project Engineer (Plastic Molding)

1st St. NW

Mechanical Engineering jobs in Saint Cloud, MN - find them here! Apply today to the top opportunities near you.

Top Mechanical Engineering Jobs in Saint Cloud, MN | Monster

Mechanical Engineering Jobs in Saint Cloud, MN

Jobs

Resume Resources

Get noticed by top employers!

Mechanical Engineering Jobs in Saint Cloud, MN

Jobs

Maintenance Tech IIMedline Industries - Transportation & Operations

Maintenance Tech IMedline Industries - Transportation & Operations

Senior Automation Machinery Mechanical DesignerErdman Automation & Design

Project Engineer (Plastic Molding)1st St. NW Technical Staffing

Resume Resources