Level II RT/CR Technician w/ Dual State Card - Corpus Christi, TX Mistras Group IncLevel II RT/CR Technician w/ Dual State Card - Corpus Christi, TXCorpus Christi, TXBe thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. MAJOR RESPONSIBILITIES/ACTIVITIES: Perform piping/vessel inspections in a lay down yard (Fab Shop) using Radiography and report findings.
Level II RT/CR Technician - Corpus Christi, TX Mistras Group IncLevel II RT/CR Technician - Corpus Christi, TXCorpus Christi, TXBe thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. Mistras is seeking dedicated Level II RT/CR Technicians local to the Corpus Christi area for a long-term project starting Sept.
UT Level II Technician - 3rd Shift Mistras Group IncUT Level II Technician - 3rd ShiftCudahy, CA$28–$35 / hourImmersion experience with automated C-scan systems for inspection of GE, Honeywell, Rolls Royce, Pratt & Whitney, and other Aerospace Prime Contractors hardware, is HIGHLY desirable. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST.
Rope Access Level 1 or 2 and RT/UT Level 2 Technician Mistras Group IncRope Access Level 1 or 2 and RT/UT Level 2 TechnicianGeismar, LAVerify, prior to performing radiographic operations that the radiographic device, associated equipment and personnel used under their supervision during the performance of radiographic operations are in accordance with company procedures and the regulations of the jurisdiction (NRC/Agreement State) where radiographic operations are being conducted. Utilize industrial radiographic equipment in a manner prescribed by the manufacturer and in accordance with all applicable federal/state regulations and local requirements, the license and its conditions, applicable license procedures, company policies, notices, directives, memorandums and instructions.
Weld Quality RT Technicians - Norco, LA Mistras Group IncWeld Quality RT Technicians - Norco, LAGeismar, LANote to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law. Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel.
Level II Eddy Current (Et) Technicians - Willing To Travel Mistras GroupLevel II Eddy Current (Et) Technicians - Willing To TravelBaytown, TXRequired for all hired as a Radiographer).To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position; Problem Solving ~ Identify and resolve problems in a timely manner. Applicants must be able to provide the following Documents: High School Diploma/GED/DegreeProof of classroom hours/Training in NDTPrevious level II certifications/OJT.
Advance Service Technician With Iris / Neardrum / Crawler In Savannah, GA Or Jacksonville, FL Mistras GroupAdvance Service Technician With Iris / Neardrum / Crawler In Savannah, GA Or Jacksonville, FLSavannah, GAMISTRAS Group, Inc. is seeking an Advance Service Technician with with IRIS / Neardrum / Crawler for a full-time position based out of Savannah, GA or Jacksonville, FL.MINIMUM REQUIREMENTS: High School graduate or equivalent required. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST.
Level II Rt/Cr Technician W/ Dual State Card - Corpus Christi, TX Mistras GroupLevel II Rt/Cr Technician W/ Dual State Card - Corpus Christi, TXCorpus Christi, TXMINIMUM REQUIREMENTS: High school diploma or GEDMust Have valid TWIC cardMust have Dual State Card and trainer statusMust be able to pass DISA background and drug/alcohol screening. Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel.
Railcar Repair Technician Marmon Holdings, IncRailcar Repair TechnicianTheodore, ALTransco Rail Services, along with Union Tank Car Company (UTLX) and Procor, delivers full‑service railcar repair and maintenance through a broad North American network of fixed shops and mobile field service teams. We are looking for talented team players to join our team and perform all aspects of railcar inspection, maintenance, and repair services for our valued customers.
Level II Rt/Cr Weld Quality Technician - Midland, TX Mistras GroupLevel II Rt/Cr Weld Quality Technician - Midland, TXOdessa, TXBe thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. High school diploma or GEDMust Have valid TWIC cardMust have valid state cardMust be able to pass DISA background and drug/alcohol screening.
Acoustic Emission (Ae) Trainee / Assistant NDE Technician Mistras GroupAcoustic Emission (Ae) Trainee / Assistant NDE TechnicianHouston, TXThe Acoustic Emission (AE) Trainee / Assistant Technician will assist a certified Level II NDE Technician with designated Acoustic Emission testing and structural health monitoring activities while gaining the required field experience and technical knowledge for formal certification. Place, couple, and secure AE sensors on various structures (e.g., pressure vessels, storage tanks, and piping systems).Perform routine and preventive maintenance tasks, pre-test calibrations, and overall upkeep of testing equipment and facilities.
Aircraft Non-Destructive Inspection Technician II Yulista SolutionsAircraft Non-Destructive Inspection Technician IIBirmingham, AlabamaDetects flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. The NDI II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.
Level II Rt/Cr Technician - Corpus Christi, TX Mistras GroupLevel II Rt/Cr Technician - Corpus Christi, TXCorpus Christi, TXBe thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. MINIMUM REQUIREMENTS: High school diploma or GEDMust Have valid TWIC cardMust have valid state cardMust be able to pass DISA background and drug/alcohol screening.
IS TECHNICIAN LDAR III Clean Harbors IncIS TECHNICIAN LDAR IIIMorris, IL$35–$45 / hourAbout HPC-Industrial: HPC-Industrial, powered by Clean Harbors, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. The Specialty Mechanical Service Technician II will need to have qualifications in one or more of the following: Leak Repair, Field Machining, Line Isolation, NDT Hydrotesting, Hot Tapping & Line Stopping.
QC Technician Prysmian SpAQC TechnicianBridgewater, NJWith Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders.
Non-Destructive Inspection Technician (NDI) III AmentumNon-Destructive Inspection Technician (NDI) IIIFort Bragg, North CarolinaThe Non-Destructive Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test.
NewNAS 410 Level II MT/PT Technician Mistras Group IncNAS 410 Level II MT/PT TechnicianHuntington, WVWe are seeking an experienced NAS 410 Level II MT/PT Technician for a long-term temporary project supporting Pratt & Whitney in West Virginia. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST.
Pipeline Technician Targa Resources CorpPipeline TechnicianMont Belvieu, TXThe Pipeline Technician must demonstrate the ability to recognize, analyze, and respond to abnormal conditions in a timely manner to minimize potential impact to people and the environment as well as eliminating risk to the liability of the company. The Technician will troubleshoot, test, maintain, and repair pipeline equipment, which may include valves, valve operators, filtration systems, relief valves.
Contractor- Senior Automotive Shop Technician - Aluminium Welding & Fabrication Ricardo plcContractor- Senior Automotive Shop Technician - Aluminium Welding & FabricationDetroit, MIA Senior Automotive Shop Technician specializing in aluminium fabrication must possess 5 to 10+ years of advanced experience building complex automotive assemblies, prototypes, or custom chassis elements. Senior Fabrication & Jigs: Custom Fixture Design: Experience in engineering and building custom shop fixtures and hold-down jigs to ensure repeatable, high-precision fitment.
Advanced Drone Technician Team Industrial Services IncAdvanced Drone TechnicianCrown Point, INAbout Team: TEAM, Inc. is a global leader in integrated asset integrity solutions, offering high-quality inspection, heat treating, and specialized maintenance services to the refining, petrochemical, power, pipeline, aerospace, and other industrial sectors. Position Overview: TEAM is currently seeking highly skilled Advanced Services Inspectors to perform specialized nondestructive examinations using advanced methods and techniques.