Senior FPGA Engineer RTXSenior FPGA EngineerHuntsville, AlabamaDesigns commonly support the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing, and processor interfaces. Designers collaborate with circuit card designers and systems engineers to develop requirements, architecture, modeling of algorithms, partitioning, code development, simulation, and place and route.
Principal FPGA Engineer RTXPrincipal FPGA EngineerHuntsville, AlabamaDesigns commonly support the following applications: gigabit serial interfaces, Radio Frequency (RF) and Electro-Optical (EO) DSP, controls, data links, embedded processing, and processor interfaces. Designers collaborate with circuit card designers and systems engineers to develop requirements, architecture, modeling of algorithms, partitioning, code development, simulation, and place and route.
Systems Engineer - SPIE AmentumSystems Engineer - SPIEHuntsville, AlabamaSpecific support that will be provided and performed by the candidate includes: Support the definition and development of flight evaluation strategies and flight data analysis tasks (FDAs), including the resulting data gathering via console operations during prelaunch testing and launch countdown of SLS, and compiling and submittal of report information. The candidate will support the development and definition of interfaces for the sub-elements and interfaces between Integrated Spacecraft and Payload Element (ISPE) sub-elements, other SLS vehicle elements, and the Exploration Ground Systems (EGS) and Orion spacecraft programs.
Systems Engineer - SPIE Amentum Services IncSystems Engineer - SPIEHuntsville, ALResponsibilities: Specific support that will be provided and performed by the candidate includes: Support the definition and development of flight evaluation strategies and flight data analysis tasks (FDAs), including the resulting data gathering via console operations during prelaunch testing and launch countdown of SLS, and compiling and submittal of report information. The candidate will support the development and definition of interfaces for the sub-elements and interfaces between Integrated Spacecraft and Payload Element (ISPE) sub-elements, other SLS vehicle elements, and the Exploration Ground Systems (EGS) and Orion spacecraft programs.
NewSenior Principal Power Design Engineer RTXSenior Principal Power Design EngineerHuntsville, AlabamaProfessional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement). At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
Sr. Systems Engineer, ICD (SME1) Amentum Services IncSr. Systems Engineer, ICD (SME1)Huntsville, ALEGS integration support to be provided by the candidate includes: Provide leadership and support for integration activities between SLS, EGS, Element and Prime Contractor teams for the NASA SLS LSE, SLS LSE Team and the SLS Chief Engineer. Perform technical integration across multiple NASA Centers, diverse engineering and program/project organizations, and a variety of engineering disciplines such as propulsion, structures, avionics and power, guidance and navigation, flight software, and human engineering.
Systems Engineer, ICD (ES2) AmentumSystems Engineer, ICD (ES2)Huntsville, AlabamaPerform technical integration across multiple NASA Centers, diverse engineering and program/project organizations, and a variety of engineering disciplines such as propulsion, structures, avionics and power, guidance and navigation, flight software, and human engineering. Personnel are required to be self-directed, effective team players familiar with working in a fast-paced, dynamic work environment who are willing to assume lead roles in the SLS requirements management, verification, and validation planning effort.
Sr. Systems Engineer, ICD (SME1) AmentumSr. Systems Engineer, ICD (SME1)Huntsville, AlabamaPerform technical integration across multiple NASA Centers, diverse engineering and program/project organizations, and a variety of engineering disciplines such as propulsion, structures, avionics and power, guidance and navigation, flight software, and human engineering. This support will include Interface Control Document ownership, working with digital engineering tools, participation in reviews, Technical Interchange Meetings (TIMs), technical performance meetings, teleconferences, working groups and trade studies.
Systems Engineer Interface Control Documents (SME2) AmentumSystems Engineer Interface Control Documents (SME2)Huntsville, AlabamaEGS integration support to be provided by the candidate includes: Provide leadership and support for integration activities between SLS, EGS, Element and Prime Contractor teams for the NASA SLS LSE, SLS LSE Team and the SLS Chief Engineer. This support will include Interface Control Document ownership, working with digital engineering tools, participation in reviews, Technical Interchange Meetings (TIMs), technical performance meetings, teleconferences, working groups and trade studies.
Sr. Supplier Quality Engineer LeidosSr. Supplier Quality EngineerHuntsville, AlabamaHigh School Diploma/GED with a minimum of 15 years of manufacturing experience, including at least 5 years in Supplier Quality and/or Quality Engineering within an AS9100 environment or equivalent experience supporting DoD, aerospace, automotive, or other highly regulated manufacturing industries. Experience with one or more special processes, including welding, painting, chemical conversion coating (Chem Film), anodizing, heat treating, counterfeit material prevention, or other NADCAP-related processes, with the ability to assess and audit suppliers against applicable requirements.
Sr. Manufacturing Engineer Blue OriginSr. Manufacturing EngineerHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Sr. Manufacturing Engineer Blue Origin Enterprises LPSr. Manufacturing EngineerHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Electromagnetic Compatibility (EMC) Engineer II Blue Origin Enterprises LPElectromagnetic Compatibility (EMC) Engineer IIHuntsville, AL$107,136–$149,990.40 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Operate, calibrate, and maintain sophisticated EMI/EMC test equipment including EMI receivers, signal generators, broadband power amplifiers, LISNs, current injection probes, calibrated antennas, near-field magnetic probes, and associated test fixtures.
Model-Based Systems Engineering (MBSE) Modeler / Systems Engineer JANUS Research Group IncModel-Based Systems Engineering (MBSE) Modeler / Systems EngineerHuntsville, AL$100,000–$104,000 / yearJANUS Research Group is seeking a Model-Based Systems Engineering (MBSE) Modeler / Systems Engineer to support A-FCD modernization, requirements, architecture, and digital engineering activities. Please advise us of any accommodations you request to express interest in a position by e-mailing: Judy Pagac, Chief Human Resources Officer at judy.pagac@janusresearch.us or calling (706) 364-9100.
1566 - Quality Control Engineer - RF Hardware & Electronics Sigma Defense1566 - Quality Control Engineer - RF Hardware & ElectronicsHuntsville, AL$65,000–$80,000 / yearSigma Defense is seeking a detail-oriented and technically capable Quality Control Engineer - RF Hardware & Electronics to support testing, inspection, troubleshooting, documentation, and quality verification of electronic components, assemblies, and systems. Candidates without an engineering degree may be considered if they have strong, directly relevant hands-on experience with electronics, RF systems, hardware testing, manufacturing test, electronics, or quality control in a technical environment .
Avionics Engineer Lead Teledyne Technologies IncAvionics Engineer LeadHuntsville, ALExperience in one or more of the following key specialty areas: electrical engineering, systems engineering, systems integration, missiles, targets, flight tests, modeling and simulations, reentry vehicles, space vehicles, rocket motors and thrusters, specialty engineering, or threat systems. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
Sr. Supplier Quality Engineer Leidos Holdings Inc.Sr. Supplier Quality EngineerHuntsville, AL$92,300–$166,850 / yearHigh School Diploma/GED with a minimum of 15 years of manufacturing experience, including at least 5 years in Supplier Quality and/or Quality Engineering within an AS9100 environment or equivalent experience supporting DoD, aerospace, automotive, or other highly regulated manufacturing industries. Experience with one or more special processes, including welding, painting, chemical conversion coating (Chem Film), anodizing, heat treating, counterfeit material prevention, or other NADCAP-related processes, with the ability to assess and audit suppliers against applicable requirements.
NewSenior Mechanical Engineer Pond & CoSenior Mechanical EngineerHuntsville, ALPond is currently ranked as the 80th largest engineering and design firm by ENR, Atlanta's #1 engineering firm by Atlanta Business Chronicle, and has been recognized as an Employer of the Year by Georgia ACEC and a Best Place to Work for Working Parents. Pond is an award-winning, full-service architecture, engineering, planning, construction management, and environmental services firm providing professional solutions to clients throughout the U.S. and globally for nearly 60 years.
OT R&D Cybersecurity Engineer ZantechOT R&D Cybersecurity EngineerHuntsville, ALPersonnel must reside within 100 miles one-way and within a 2-hour commute of a dually-approved SIPRNet-accredited workspace within one of 7 DLA primary locations: DLA HQ in Fort Belvoir, Virginia; DLA Aviation in Richmond, Virginia; DLA Disposition Services in Battle Creek, Michigan; DLA Distribution in New Cumberland, Pennsylvania; DLA Land and Maritime in Columbus, Ohio; Huntsville, Alabama; and DLA Troop Support in Philadelphia, Pennsylvania. Impact: Supports DLA's Information Technology R&D program, including programs and projects under the Defense Industrial Base Manufacturing and Small Business Innovation Research initiatives, reducing the time, effort, and total cost of acquisition for R&D projects as they migrate toward production DoD systems.
OT Cybersecurity Engineer ZantechOT Cybersecurity EngineerHuntsville, ALPersonnel must reside within 100 miles one-way and within a 2-hour commute of a dually-approved SIPRNet-accredited workspace within one of 7 DLA primary locations: DLA HQ in Fort Belvoir, Virginia; DLA Aviation in Richmond, Virginia; DLA Disposition Services in Battle Creek, Michigan; DLA Distribution in New Cumberland, Pennsylvania; DLA Land and Maritime in Columbus, Ohio; Huntsville, Alabama; and DLA Troop Support in Philadelphia, Pennsylvania. Impact: This role directly supports the two objectives of the task order, improving the cybersecurity posture of all DLA activities and enforcing compliance with OMB, DoD, DLA, NIST, and other applicable cybersecurity policy across DLA IT, Cloud, and OT technologies, spanning both unclassified (NIPRNet) and classified (SIPRNet) systems.