NewProject Development Engineer II EMCOR Group IncProject Development Engineer IIWashington, DC$70,000–$95,000 / yearEngineer-in-Training (EIT), Professional Engineer (PE), Certified Energy Manager (CEM), Leadership in Energy and Environmental Design (LEED), Clinical Laboratory Improvement Amendments (CLIA), Certified Water Efficiency Professional (CWEP), Project Management Professional (PMP) prefered. By bridging the gap between sustainable design concepts and on-site reality, you will ensure that every system-from HVAC to water management-operates at peak sustainability, ensuring all mechanical installations are safe, efficient, and in strict compliance with evolving energy codes and project specifications.
EHS Engineer III Blue OriginEHS Engineer IIIWashingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Implements EHS programs for the evaluation and control of potential hazards including, but not limited to industrial hygiene; fall protection; confined space; lock out tag out; process safety management; hazard assessments; hearing conservation and noise hazards; heat stress; and environmental management.
NewIT Network Engineer The Centers for Advanced Orthopaedics LLIT Network EngineerBethesda, MDOur services are specifically designed for musculoskeletal (MSK) providers and go beyond that of a traditional MSO, empowering our clients with the precise infrastructure, data, technology, and administrative processes needed to thrive both today and tomorrow. In addition to remote support and infrastructure management, this position includes hands-on field service work at office and clinical locations to install, troubleshoot, and maintain network and endpoint systems.
Civil Engineer U.S. Department of the InteriorCivil EngineerWashington, DC$57,999–$127,443 / yearSpecialized experience is defined as demonstrated experience: Leading the preparation of complex construction and supply specifications, ensuring compliance with regulations; Reviewing and approving design documents from Architecture & Engineering (A&E) Contractors and providing comprehensive technical guidance; Preparing detailed drawings, technical reports, cost estimates, and/or construction inspections; AND. The work environment involves regular and recurring exposure to moderate risks, discomforts, and unpleasantness such as high noise levels, infectious materials, or toxic or irritating chemicals; travel in safety approved small aircraft and water craft; high winds and low or high temperatures; infestation of dangerous reptiles or poisonous plants, snakes or insects; adverse weather conditions; noxious fumes; flammable liquids or radiation.
NewSr. / Principal Welding Process Engineer Dixon Valve & Coupling CoSr. / Principal Welding Process EngineerStevensville, MD$116,000–$156,000 / yearIn this role you will be a senior technical contributor responsible for developing welding and joining capabilities that support Hydrasearchs aerospace, naval, and defense programs. Design for Weldability: Provide early technical input to development teams to ensure manufacturability and prevent late-stage rework.
Enterprise - Senior Software Engineer - Angular, Spring, Java Erias VenturesEnterprise - Senior Software Engineer - Angular, Spring, JavaAnnapolis Junction, MarylandProvides specific input to the software components of system design to include hardware/software trade-offs, software reuse, use of Commercial Off-the-shelf (COTS)/Government Off-the-shelf (GOTS) in place of new development, and requirements analysis and synthesis from system level to individual software components. We are seeking a Software Engineer who develops, maintains, and enhances complex and diverse software systems (e.g., processing-intensive analytics, novel algorithm development, manipulation of extremely large data sets, real-time systems, and business management information systems) based upon documented requirements.
Sr. Process Engineer (Development Support) Power3 SolutionsSr. Process Engineer (Development Support)MarylandExperience is to include, within the past ten (10) years, five (5) years' experience in facilitation, training, methodology development and evaluation, process engineering across all phases of acquisition identifying best practices, change management, business management techniques, organizational development, activity and data modeling, or information system development methods and practices. We provide fresh alternatives to ordinary, mainstream consulting firms through small, highly skilled, and hand-picked teams that can meet clients' needs in any industry.
Air Vehicle Systems Engineer Peraton IncAir Vehicle Systems EngineerMD$104,000–$166,000 / yearAir Vehicle Experience in materials, aerodynamics, vehicle performance, vehicle modeling & simulation, handling qualities, dynamics, flight controls, strength, loads, fatigue, hydraulics, pneumatics, environmental control systems, fire protection, anti-icing, landing gear, wheels, bearings, fasteners, transparencies, internal & external cargo, latches, doors, aircraft surveillance, corrosion protection, non-destructive inspection techniques, fuel systems, and aerial refueling. What you will need: A minimum requirement of a Bachelor of Science degree in one or more of the following: Computer Science, Electrical Engineering, Mechanical Engineering, Materials Engineering, Aerospace Engineering, and/or Chemical Engineering from an ABET accredited university with 8 years of experience; A Masters of Science in Systems Engineering and/or other Engineering related disciplines given preference with 6 years of experience.
NewProject Development Engineer I EMCOR Group IncProject Development Engineer IAlexandria, VA$65,000–$78,000 / yearBy bridging the gap between sustainable design concepts and on-site reality, you will ensure that every system-from HVAC to water management-operates at peak sustainability, ensuring all mechanical installations are safe, efficient, and in strict compliance with evolving energy codes and project specifications. As a Project Development Engineer I, you will be at the forefront of the green building revolution, transforming how structures consume resources by leading the design, implementation, and management of advanced mechanical systems optimized to drive down energy costs.
DevOps Engineer Booz Allen HamiltonDevOps EngineerMcLean, Virginia$62,000–$141,000 / yearOn our team, you’ll work alongside software engineers developing applications using technologies such as React, Node.js, and Python, while helping design and improve cloud infrastructure, CI/CD pipelines, containerization, networking, and deployment processes that support those applications. You’ll collaborate with developers, architects, security teams, and other engineers to identify opportunities for automation, troubleshoot deployment and infrastructure issues, and establish repeatable patterns that make it easier for application teams to build and operate secure cloud-native solutions.
NewSoftware Engineer Ring0 Technologies IncSoftware EngineerFort Meade, MDRingØ personnel have been working with the DoD and IC community for over 20 years delivering cutting edge and high impact Computer Network Operations (CNO) technology solutions. \nCompany Description RingØ Technologies ("Ring Zero") is a Veteran Owned Small Business providing mission focused solutions to the DoD, IC, Federal Law Enforcement, and Homeland Security.
Manufacturing Engineer II/III Textron IncManufacturing Engineer II/IIIHunt Valley, MD$88,200–$133,000 / yearIn compliance with local pay transparency law, the pay range for this position is: o Level 2 Engineer: Typically, 3 years of experience $88,200 - $133,000 per year o Level 3 Engineer: Typically 5 years of experience $98,600 - $149,400 per year 3 years of experience in a manufacturing environment (preferably electrical/electronic/RF experience) Experience and relevant background in application of materials, manufacturing methods and equipment; especially in regards to assembling, troubleshooting, repairing electronic systems, circuits, test equipment and cables/harnesses Knowledge of electronics, electrical, RF, mechanical design and lean manufacturing principles. Benefits may include health insurance and prescription plan coverage, dental insurance, family building benefits, vision insurance, mental health resources, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and programs that provide employees time away from work.
Business Process Engineer Ukpeagvik Inupiat CorpBusiness Process EngineerFort Meade, MDThis key position supports the International Acquisitions and Engagements Branch by providing expertise to analyze, document, and re-engineer business processes related to international acquisition activity in support of DISA. Lead cross-functional workshops and meetings with key stakeholders, including PMOs, contracting officers, financial managers, TSFD specialists, and DoD representatives.
Senior Structural Engineer MW TalentSenior Structural EngineerFulton, MDThis role is best suited for someone who has experience leading projects, working with clients, developing proposals, mentoring junior engineers, and supporting team growth. The expected balance is approximately 60% to 70% technical engineering and project delivery, 15% to 20% mentoring and team leadership, and 10% to 15% business development, proposal support, networking, and client relationship management.
Sr. PFAS Process Engineer Black & Veatch Holding CoSr. PFAS Process EngineerArlington, VAThe PFAS Regional Lead will provide subject matter expertise on compliance with the NPDWR and analytical methods for PFAS monitoring, development of protocols for rapid small-scale column testing and pilot testing, development and analysis of breakthrough curve models, and design and implementation of adsorption processes for PFAS treatment. Project Execution: Serve as a technical advisor with a deep understanding of PFAS regulations, rapid small-scale column testing and pilot testing,, development and analysis of breakthrough curve models, and design and implementation of adsorption processes for PFAS treatment, with support and guidance from PFAS Practice Leads.
Engineer, Facilties Catalent IncEngineer, FaciltiesMD$80,000–$110,000 / yearIn-depth understanding and knowledge of Clean Utility Systems including Water for Injection (WFI) generation and distribution, purified water generation and distribution, clean steam generation and distribution, HVAC for clean rooms, clean gas generation and distribution. Important Security Notice to U.S. Job Seekers: Catalent NEVER asks candidates to provide any type of payment, bank details, photocopies of identification, social security number or other highly sensitive personal information during the offer process, and we NEVER do so via email or social media.
Civil Engineer AES CorporationCivil EngineerArlington, VA$94,000–$112,625 / yearAES Clean Energy is seeking an experienced Civil Engineer to join the Civil Engineering team in supporting Strategic Development (Strat Dev), Real Estate (RE), Development (Dev), Development Engineering (Dev Eng), Execution Engineering (Exec Eng), Construction and Operations and Maintenance (O&M) for design development, permitting, construction and O&M support of wind, photovoltaic (PV) and grid-scale battery energy storage systems (BESS) in coordination with the AES Clean Energy teams. Review and verify preliminary studies of hydrology, hydraulics, stormwater management, and earthworks estimates among others for projects in development through EPC stages of development [5%, 10%, 30%, 60%, 90%, issue for permit (IFP), and issue for construction (IFC)] with Civil Engineering team.
Devops Engineer Booz Allen Hamilton Inc.Devops EngineerMclean, VA$62,000–$141,000 / yearOn our team, you'll work alongside software engineers developing applications using technologies such as React, Node.js, and Python, while helping design and improve cloud infrastructure, CI/CD pipelines, containerization, networking, and deployment processes that support those applications. You'll collaborate with developers, architects, security teams, and other engineers to identify opportunities for automation, troubleshoot deployment and infrastructure issues, and establish repeatable patterns that make it easier for application teams to build and operate secure cloud-native solutions.
Electronics Manufacturing Engineer Johns Hopkins Applied Physics LaboratoryElectronics Manufacturing EngineerLaurel, MarylandFull timeYour primary responsibility will be to interface with electrical and mechanical engineers from around the Laboratory, develop process plans and technical capabilities to build their hardware, and be hands on while leading the hardware development through the surface mount electronics fabrication area. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
NewApplications Engineer, Risk and Compliance Systems Paul Hastings LLPApplications Engineer, Risk and Compliance SystemsWashington, D.C., DCProficiencies: Possess strong communication, organization, customer service, and collaboration skills; Knowledge of cloud systems including features, integrations, and release management; Knowledge of system integrations including APIs, web services, FTP, and relational databases; Ability to work with project management on tasks and tools such as Confluence and JIRA; Familiarity with security best practices and procedures; Familiarity with data governance best practices and procedures; and. Qualifications: At least 5 years experience in risk and compliance, data governance, and general counsel business processes required; At least 3 years of information technology experience preferred; At least 3 years' experience working with and supporting enterprise platforms preferred; At least 3 years management level engagement and customer service preferred; and.