Piping Technician (Starlink) SpaceXPiping Technician (Starlink)Bastrop, TXAs a Piping Technician at Starlink, you will take ownership of state-of-the-art piping systems that support our Starlink User Terminal Production Facility—supporting our PCB operations (largest printed circuit fab in North America!) and our Chip Packaging Plant (featuring a state-of-the-art panel level packaging process). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Water Treatment Technician, UPW & Wastewater (Starlink) SpaceXWater Treatment Technician, UPW & Wastewater (Starlink)Bastrop, TXAs a Water Treatment Technician on Starlink, you will take ownership of state-of-the-art production processes and equipment performance and reliability by monitoring process parameters and maintaining components, with a keen eye for leading indicators of instability or malfunction, and a drive to correct those issues in advance of undesirable events. Manage wastewater treatment processes, including pH neutralization, evaporators (multiple-effect vacuum and MVR units), clarification/precipitation and solids dewatering, AOP (advanced oxidation processes), crystallizers, and a variety of other processes (TMF, UF, etc.).
NewPiping Technician (Starlink) Space Exploration TechnologiesPiping Technician (Starlink)Bastrop, TXAs a Piping Technician at Starlink, you will take ownership of state-of-the-art piping systems that support our Starlink User Terminal Production Facility-supporting our PCB operations (largest printed circuit fab in North America!) and our Chip Packaging Plant (featuring a state-of-the-art panel level packaging process). ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewManufacturing Technician Space Exploration TechnologiesManufacturing TechnicianBastrop, TXThe ideal candidate is comfortable in a fast-paced, metrics-driven manufacturing environment, learns quickly, works safely, and is motivated by SpaceX's mission to provide high speed, low-latency connectivity across the globe. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Junior Process Engineer Twin ResourcesJunior Process EngineerSpringfield, OhioWorking alongside experienced engineers and production teams, you will help improve manufacturing processes, increase efficiency, reduce costs, and support quality initiatives. Bachelor's degree in Materials Science, Metallurgy, Chemical Engineering, Manufacturing Engineering, or a related engineering field.
Quality Technician - 2Nd Shift AlkegenQuality Technician - 2Nd ShiftSebring, OHWith over 60 manufacturing facilities with a global workforce of over 9,000 of the industry's most experienced talent, including insulation and filtration experts, Alkegen is uniquely positioned to help customers impact the environment in meaningful ways. Alkegen brings together two of the world's leading specialty materials companies to create one new, innovation-driven leader focused on battery technologies, filtration media, and specialty insulation and sealing materials.
OT Cybersecurity Engineer ZantechOT Cybersecurity EngineerColumbus, OHPersonnel must reside within 100 miles one-way and within a 2-hour commute of a dually-approved SIPRNet-accredited workspace within one of 7 DLA primary locations: DLA HQ in Fort Belvoir, Virginia; DLA Aviation in Richmond, Virginia; DLA Disposition Services in Battle Creek, Michigan; DLA Distribution in New Cumberland, Pennsylvania; DLA Land and Maritime in Columbus, Ohio; Huntsville, Alabama; and DLA Troop Support in Philadelphia, Pennsylvania. Impact: This role directly supports the two objectives of the task order, improving the cybersecurity posture of all DLA activities and enforcing compliance with OMB, DoD, DLA, NIST, and other applicable cybersecurity policy across DLA IT, Cloud, and OT technologies, spanning both unclassified (NIPRNet) and classified (SIPRNet) systems.
NewSenior NPI Quality Engineer Illuminate USASenior NPI Quality EngineerPataskala, OhioCollaborate with Process Engineering, Quality & Reliability, Operations Planning, and CQE (Customer Quality Engineering) teams to ensure alignment and shared understanding of product requirements. Plan and implement QFD activities, including identifying deliverables, engaging cross-functional stakeholders, and converting customer requirements (WHATs) into technical solutions (HOWs).
OT R&D Cybersecurity Engineer ZantechOT R&D Cybersecurity EngineerColumbus, OHPersonnel must reside within 100 miles one-way and within a 2-hour commute of a dually-approved SIPRNet-accredited workspace within one of 7 DLA primary locations: DLA HQ in Fort Belvoir, Virginia; DLA Aviation in Richmond, Virginia; DLA Disposition Services in Battle Creek, Michigan; DLA Distribution in New Cumberland, Pennsylvania; DLA Land and Maritime in Columbus, Ohio; Huntsville, Alabama; and DLA Troop Support in Philadelphia, Pennsylvania. Impact: Supports DLA's Information Technology R&D program, including programs and projects under the Defense Industrial Base Manufacturing and Small Business Innovation Research initiatives, reducing the time, effort, and total cost of acquisition for R&D projects as they migrate toward production DoD systems.
Product Quality Engineer MedNational StaffingProduct Quality EngineerToledo, OHBachelor’s degree or higher in the fields of Mechanical Engineering, Electrical Engineering or Mechanical Engineering Technology from an accredited university (other Engineering degrees, in combination with relevant experience may be considered). Partner with Process Quality team to properly map issues/defects within PFS/MCV to ensure vehicles with defects will not escape the plant and defects are identified, measured (trends) and issues are attacked.
Component Obsolescence Engineer Advatech Pacific, Inc.Component Obsolescence EngineerElyria, OHAdvatech Pacific is currently seeking an Electrical Engineer for Component Obsolescence Management The primary focus will be on qualifying alternate parts, Design, Testing and Failure Analysis. EMI/EMC discipline: grounding/bonding concepts, cable shielding terminations, filtering for radiated and conducted emissions, common and differential mode filters.
Supplier Quality Engineer Principal Illuminate USASupplier Quality Engineer PrincipalPataskala, OhioThis role requires close collaboration with Global Supply Chain, Procurement, Engineering, Manufacturing, R&D, and supplier teams to ensure suppliers have stable manufacturing capability, robust process control, high product quality, and long-term reliability. Apply statistical quality tools to improve supplier process capability: SPC (Statistical Process Control), MSA (Measurement System Analysis), GR&R (Gauge Repeatability & Reproducibility), DOE (Design of Experiments), Cp/Cpk Process Capability Analysis.
Electrical Engineer Advatech Pacific, Inc.Electrical EngineerElyria, OHHigh-reliability electronics design/analysis awareness: derating, thermal margins, worst-case analysis, tolerance stack-ups, datasheet comparisons. This position may work independently for formulate potential solutions to given component issues, assembly problems or changes to facilitate manufacturing.
Controls Engineer Allegion plcControls EngineerCincinnati, OHAs a Controls Engineer, you will manage plant-wide machine automation, from upgrading legacy relay logic controls to optimizing advanced, fully automated Salvagnini systems and Fanuc industrial robots, overseeing full-scale installation and optimization to drive continuous improvement, safety, and efficiency across our facility. Mechanical Skills: Ability to use hand and power tools safely, interface with robotics systems technology, and operate electrical testing equipment such as multimeters, calibrators, and oscilloscopes (Required).
Sr Quality Engineer Crane CompanySr Quality EngineerPiqua, OhioIndividuals with temporary visas (Examples: E, F-1 with OPT or CPT, H-1, H-2, L-1, B, J or TN), or those who need sponsorship for work authorization now or in the future, are not eligible for hire at this time. This description has been designed to indicate the general nature and level of work being performed by employees within this classification.
Allobaas - Data Engineering Lead First Federal Savings and Loan Association LakewoodAllobaas - Data Engineering LeadLakewood, OHRemoteThis role provides technical leadership, direction, and oversight for data engineering activities across data platforms, data pipelines, integrations, data warehouse operations, middleware/Azure Enterprise Service Bus capabilities, reporting modernization, and enterprise data governance practices. In partnership with business stakeholders and third-party vendors, the Data Engineering Lead is responsible for guiding the design, development, support, and continuous improvement of scalable, secure, reliable, and well-documented data solutions.
Quality Engineer SGL GroupQuality EngineerStrongsville, OHPreparing, structuring and analyzing material and product related data from the ongoing production to reduce quality problems; observing and reducing scrap and rework / extra work with the target of continuous improvement of the product quality as well as reduction of the Costs of Poor Quality (COPQ) in close cooperation with the Quality Manager/Production Manager. Support of planning, preparing and support of execution of internal and external System and Process Audits as well as Supplier Audits; support of planning, preparing, and attending external audits from customers and Notified Bodies (as needed); following-up audit measures and verifying the effectiveness.
Supplier Quality Engineer Vertiv Holdings, LLCSupplier Quality EngineerFranklin Furnace, OHCollect information and documentation (technical and commercial, i.e. technical drawings, order documentation, unit setting, etc.) of the projects from central functions (R&D, Marketing, Service, Operations and Quality) and make them available to local organization to support the site activity. Support the central functions to have smooth process from ETO design phase to assembly and test activity done in the factory; related activities to follow are kick off meeting, PDCA document preparation, closure meeting, assembly process, final test, witness test, etc.
Quality Engineer Supervisor Energizer HoldingsQuality Engineer SupervisorVandalia, OhioFull timeActual base salary offered to a candidate may vary based upon factors including, but not limited to, relevant experience, time in role, base salary of internal peers, prior performance, business sector, and geographic location. Our total rewards package provides comprehensive benefits to attract, retain, and protect our colleagues – including health and welfare insurance, parental leave, paid time off, and retirement savings plans.
Project Engineer - Onsite Western PartitionsProject Engineer - OnsiteColumbus, OhioWPI provides superior contracting services for drywall, prefabrication, metal studs, acoustical systems, wall panels, fireproofing, firestopping, stucco, claddings, painting, windows, doors/frames/hardware, and more. Quality Assurance: Support quality assurance activities by participating in site and material inspections, documenting and resolving quality issues, assisting with punch list completion, and coordinating third-party inspections and testing.