NewQuality Inspector Precision Custom Components, LLCQuality InspectorYork, PAWhether you’re driving results in the office or making them happen on the shop floor, you’ll collaborate across departments to solve problems, support efficient operations, and help ensure every component is completed safely, accurately, and with precision! Job DescriptionJob DescriptionPrecision Custom Components (PCC) is seeking a talented Quality Inspector with Machining Background (2nd shift) to join our team.
Construction Administration/Field Document Control Specialist Whitman, Requardt & Associates, LLPConstruction Administration/Field Document Control SpecialistBaltimore, MD$30–$40 / hourContractorWRA is currently seeking qualified Construction Administration/Document Control Specialist (Project Controls) for a major Design-Build project located in Baltimore, Maryland. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience.
Construction Inspector (TET III – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET III – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
NewConstruction Inspector (TET II – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET II – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
NewManufacturing Engineer York Precision Machining and HydraulicsManufacturing EngineerYork, PAProduction Scheduling – Develop and maintain work center schedules aligning internal capacity with material deliveries, outside processing lead times, and customer delivery requirements to ensure on-time delivery and efficient capacity utilization. CNC Support — Support CNC programmer and machinists by collaborating on programs, generating CNC programs, validating programs, optimizing feeds/speeds, and troubleshooting machining issues on the shop floor.
Quality Control Technician {170429} A-Line Staffing Solutions LLCQuality Control Technician {170429}SPARKS GLENCO, MD$25–$35 / hourA-Line Staffing is now hiring Quality Control Technician (Tech 2, Quality Control) in Sparks Glencoe, MD 21152 . Support final product inspection to verify conformance with: Drawings/blueprints.
Quality Control Technician A-Line Staffing Solutions LLCQuality Control TechnicianSPARKS GLENCO, MD$25–$35 / hourProvide focused, hands on quality support and expertise for all plant related quality issues. Support final product inspection to verify conformance with: Drawings/blueprints .
NewQuality Technician Synerfac Technical StaffingQuality TechnicianOwings Mills, MD$25.50–$29.50 / hourTemporaryContractorBy applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. -Support corrective action process by following up on corrective action requests, verifying the effectiveness of the actions taken and closure of requests .
Production Machine Operator - Weekend Night Shift A-Line Staffing Solutions LLCProduction Machine Operator - Weekend Night ShiftSparks Glencoe, MD$20.53–$20.53 / hourThis is a weekend night shift role designed for individuals who are comfortable working independently, following established procedures, and supporting continuous production in a fast-paced but controlled environment. Candidates with experience in any of the following roles or similar positions are strongly encouraged to apply: Machine Operator / Production Machine Operator.
Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Electrical Quality Control Inspector M.C. Dean, IncElectrical Quality Control InspectorFrederick , Maryland$35.50–$39.50 / hourPerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Quality Control Inspector Oceaneering International IncQuality Control InspectorHanover, MD$33.22–$49.86 / hourRead drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. Today, we are a leading global provider of engineered products and services to several industries, including energy, defense, aerospace, entertainment/theme parks, materials handling, and science and research.
Electrical Quality Control (QC) Inspector M.C. Dean IncElectrical Quality Control (QC) InspectorBaltimore, MD$35.50–$39.50 / hourPerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Quality Control Inspector (Custodial Operations - AM Shift) Chimes IncQuality Control Inspector (Custodial Operations - AM Shift)Fort George G Meade, MDProvide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. Experience: Minimum two (2) years' experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.
Senior Incoming Quality Control Inspector Rocket Lab CorpSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Incoming Quality Control Inspector Rocket Lab CorporationSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Construction Quality Control Inspector CbConstruction Quality Control InspectorLaurel, MarylandReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Quality Control Inspector XometryQuality Control InspectorGaithersburg, MD$58,000–$76,000 / yearXometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. As a Quality Control Inspector, you will play a crucial role in ensuring the highest quality of manufactured parts and finished goods that are delivered to our customers.
Quality Control Inspector (Custodial Operations - AM Shift) Chimes District of Columbia, IncQuality Control Inspector (Custodial Operations - AM Shift)Fort George G Meade, MDPart timeProvide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. · Minimum two (2) years’ experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.
Senior Incoming Quality Control Inspector Rocket Lab USASenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any nonconformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 8+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fastpaced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab CorporationIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Electrical Quality Control Supervisor M.C. Dean, IncElectrical Quality Control SupervisorBaltimore , Maryland$90,640–$135,960 / yearThis role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
Quality Control Inspector – Grade 1 Almac Group LtdQuality Control Inspector – Grade 1Dundalk, MDFor description, see this url: https://www.almacgroup.com/careers/apply/?gnk=job&gni=8a7887ac9d02e529019d1a915fbf68d0.
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab USAIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourFull timeWHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any non‑conformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast‑paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 5+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fast‑paced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.
Associate Quality Control Quality Microbiology, Cell Therapy AstraZeneca PlcAssociate Quality Control Quality Microbiology, Cell TherapyRockville, MD$55,920.80–$83,881.20 / yearAdditional responsibilities include incubation and enumeration of media plates and samples, processing plates for microbial identification through external laboratories, operating laboratory instruments in accordance with SOPs, and documenting data accurately in electronic systems following ALCOA+ principles. In this role, you will support routine microbiological quality control activities such as Rapid Sterility, Mycoplasma, Bioburden, Endotoxin, Growth Promotion, and Cell Aliquoting under approved methods and cGMP/GDP expectations.
Quality Control Technician Jobs in USA, MD, Sparks | Rose International Job Rose InternationalQuality Control Technician Jobs in USA, MD, Sparks | Rose International JobSparks, MD$25–$35 / hourTemporaryRose International has an official agreement (ID #132522), effective June 30, 2008, with the U.S. Department of Homeland Security, U.S. Citizenship and Immigration Services, Employment Verification Program (E-Verify). The Incoming Mechanical/Electrical Inspector II is responsible for effectively interacting with all levels of associates and all functional departments in the organization.
QUALITY CONTROL MANAGER Chugach Government Solutions, LLCQUALITY CONTROL MANAGERMD$112,400–$122,400 / yearThe Quality Control Manager (QCM) serves as the Contractors designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.
QUALITY CONTROL MANAGER Chugach Government SolutionsQUALITY CONTROL MANAGERLINTHICUM, Maryland$112,400–$122,400 / yearThe Quality Control Manager (QCM) serves as the Contractor’s designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields – each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.
Senior Quality Control Analyst Lockheed Martin CorpSenior Quality Control AnalystMDRemote$90,500–$119,000 / yearUses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. On top of working in a highly supportive, friendly, respectful environment, this is what you can expect when you join our team as a Regular Full-Time employee: Flexible, compressed work schedules, depending on business requirements, where you have the option of Fridays off, as well as the possibility to work remote part-time.
Quality Control Manager Clark Construction GroupQuality Control ManagerColumbia, MarylandAbility to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers. As a Quality Control Manager, you will ensure the project is built within contract document specifications, owner requirements, and comply with local, state, and federal building codes.
Tech 2, Quality Control TechDigitalTech 2, Quality ControlSparks, MDThe Incoming Mechanical/Electrical Inspector II is responsible for effectively interacting with all levels of associates and all functional departments in the organization. · Plan and perform daily work duties, inspections, and tests under the direction of Supervisor/Group Leader .
Quality Control Manager - Custodial MelwoodQuality Control Manager - CustodialBaltimore, MarylandThis position requires that the employee must successfully complete criminal history information background check and drug screening and be able to obtain and maintain a government security clearance. Develop, maintain, and audit quality assurance procedures and inspection procedures and inspection checklists; track and report quality metrics and trends.
Quality Control Technician Vulcan Materials CoQuality Control TechnicianHanover, PA$23.49–$29.80 / hourQuality Control'',''Quality Control'',''Pennsylvania-Hanover'',''Pennsylvania-Hanover'','''','''',''GM - VA/MD/PA/DE'',''GM - VA/MD/PA/DE'',''Full-time'',''Full-time'',''May 27, 2026, 11:39:23 AM'',''May 27, 2026, 11:39:23 AM'','''','''',''false'','''','''','''','''',''false'',''609228'',''609228'',''true'',''609228'',''false'',''Submission for the position: Quality Control Technician - (Job Number: 260001A2)'',''false'',''609228'',''false'',''false''. Adhere to testing methods, including the American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO), and Department of Transportation (DOT).
Quality Control Specialist (Architectural) Clark Construction GroupQuality Control Specialist (Architectural)Fort Meade, MarylandConduct detailed inspections of exterior and interior architectural elements, including exterior envelope (waterproofing, façade systems, roofing, windows, doors) and interior finishes (drywall, doors/frames/hardware, painting, floor finishes, wall finishes, and millwork) for compliance with contract documents, approved submittals, and mock-ups. Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers.
Quality Control Chemist (at Gelest) GelestQuality Control Chemist (at Gelest)Glen Rock, PennsylvaniaFactors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. Working knowledge of analytical techniques and instrumentation including HPLC, GC, GPC, UV-Vis, FT-IR, Karl Fischer, potentiometric titrations, spectrophotometry, and kinematic viscometry.
Quality Control Associate Sysco CorpQuality Control AssociateLaurel, MD$18.56–$27.79 / hourCountry Code+1+1242+1246+1264+1268+1284+1340+1441+1473+1649+1664+1670+1671+1684+1758+1767+1784+1849+1868+1869+1876+1939+20+211+212+213+216+218+220+221+222+223+224+225+226+227+228+229+230+231+232+233+234+235+236+237+238+239+240+241+242+243+244+245+248+249+250+251+252+253+254+255+256+257+258+261+262+264+265+266+267+268+269+27+290+291+297+298+299+30+31+32+33+34+345+350+351+352+353+354+355+356+357+358+359+36+370+371+372+373+374+375+376+377+378+379+380+381+382+385+386+387+389+39+40+41+420+421+423+43+44+45+46+47+48+49+500+501+502+503+504+505+506+507+508+509+51+52+53+54+55+56+57+58+590+591+593+594+595+596+597+598+599+60+61+62+63+64+65+66+670+672+673+674+675+676+677+678+679+680+681+682+683+685+686+687+688+689+690+692+7+77+81+82+84+850+852+853+855+856+86+872+880+886+90+91+92+93+94+95+960+961+962+963+964+965+966+967+968+970+971+972+973+974+975+976+977+98+992+993+994+995+996+998Phone Number. Job CategorySelect a Job CategoryAdministrationCommunications FamilyCorporate AffairsCustomer SuccessData AnalysisFinanceHuman ResourcesLegalMaintenanceManufacturingMerchandisingOperationsProject ManagementProperty ManagementQuality AssuranceSalesSupply ChainTechnologyTransportationUSA Fleet/Transportation; USA Talent Acquisition Driver; USA OperationsWarehouse.
Manager Quality Control Analytical (Sunday-Wednesday) AstraZeneca PlcManager Quality Control Analytical (Sunday-Wednesday)Rockville, MD$112,604.80–$168,907.20 / yearAnalytical testing: Perform and oversee QC testing for cell therapy products (flow cytometry, ELISA, PCR, cell based assays, cell count/viability) per approved methods, ensuring adherence to cGMP, GDP, and data integrity expectations (ALCOA+). The role focuses on right‑first‑time analytical assay execution (e.g., flow cytometry, ELISA, PCR, automated cell counting, and other cell‑based assays) and end‑to‑end laboratory readiness, including people and equipment oversight.
Manager Quality Control Analytical (Wednesday - Saturday) AstraZeneca PlcManager Quality Control Analytical (Wednesday - Saturday)Rockville, MD$112,604.80–$168,907.20 / yearAnalytical testing: Perform and oversee QC testing for cell therapy products (flow cytometry, ELISA, PCR, cell based assays, cell count/viability) per approved methods, ensuring adherence to cGMP, GDP, and data integrity expectations (ALCOA+). The role focuses on right‑first‑time analytical assay execution (e.g., flow cytometry, ELISA, PCR, automated cell counting, and other cell‑based assays) and end‑to‑end laboratory readiness, including people and equipment oversight.
Construction Quality Control Manager Bering Straits Native CorporationConstruction Quality Control ManagerMD$125,000–$165,000 / yearThree years' experience as a quality control manager on industrial or commercial projects • Quality Manager with a minimum of 10 years in related work • BS degree in engineer, architect, or construction management with 5 years of experience as a construction Contractor Quality Control Manager / Contractor Quality Control System Manager / Quality Control Manager • Completed USACE/NAVFAC Construction Quality Management for Contractors (CQM-C) Training with the past 5 years • ICD/ICS 705 training • Experience on projects exceeding $500,000 (specifically HVAC and electrically heavy projects) • Experience working with the USACEMust be US Citizen • OSHA 30 Certification (can be obtained after employment) • Valid Driver's License • Current or ability to get a security clearance • Knowledge, Skills and Abilities • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. • Previous Federal DoD contract experience • Management of task order projects in the Washington DC region • Ability to read drawings / prints • Safety experience in multi-trade construction projects • Knowledge of OSHA and EM-385 requirements • Experience enforcing corporate or site quality control programs • Written and Oral communication with customer, subcontractors, and internally to provide project updates • Knowledge with all aspects of a construction project (electrical, HVAC, Fire Alarm, Fire Suppression, architectural, etc.).
Quality Control Technician (Roofing) Centimark CorporationQuality Control Technician (Roofing)Jessup, MD$27–$32 / hourThey will spot check projects during installations and ensure that the crews are following the installation specification set forth by the management and perform all final quality control checks of every project once they are completed. CentiMark Corporation is the nation's largest commercial/industrial roofing contractor with over 100 offices and 3,500 employees.
Quality Control Associate Bioanalytical Laboratory Meso Scale Diagnostics LLCQuality Control Associate Bioanalytical LaboratoryGaithersburg, MDPOSITION SUMMARY: The Quality Control Associate provides support to the Bioanalytical Laboratory (BAL) staff for sample testing studies, including those performed under applicable elements of Good Laboratory Practices (GLP) and/or Good Clinical Laboratory Practices (GCLP), under direct supervision. Communicates and works with bioanalytical principal investigators (BPIs), study coordinators, and lab personnel to resolve any identified issues and ensures all issues are resolved in a timely manner.
Quality Control Laboratory Specialist MindlanceQuality Control Laboratory SpecialistRockville, MD1-2 years executing routine and non-routine analysis for cGMP lot release and stability testing using techniques including, but not limited to, cell culture, flow cytometry and cell-based methods, PCR (dPCR, qPCR), immunoassays (ELISA), etc. Receive, verify, label, store, and track samples, controls, and reagents to ensure traceability and timely transfer to testing laboratories, using paper and electronic systems and operating temperature-controlled units.
Quality Control Manager - Ft. Meade, MD M.C. Dean IncQuality Control Manager - Ft. Meade, MDFort Meade, MD$150,080–$225,120 / yearMust have Bachelor's degree in Engineering, Architecture, Construction Management, Engineering Technology, Building Construction, or Building Science with a minimum of 10+ years' experience as a Project Superintendent, QC Manager, Project Manager, Project Engineer or Construction Manager OR 15+ with a HS diploma. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability.
Sr. Manager, Quality Control ESAB CorpSr. Manager, Quality ControlHanover, PAQualifications BS Engineering discipline or other technical degree required 8-10 years of experience within a manufacturing setting with direct supervisory experience Travel Negligible to 10% Exceptional and Demonstrated Problem Solving Skills Quality Planning/Test Planning Experience working with external customer quality issues Superior personal computer skills including MS Office Suite, Strategic Planning software, Project Management software systems. ASME/Mil Spec Experience Preferred Six Sigma/Lean Certification preferred Welding Knowledge Experience in NQA-1, ASME Section 3 preferred Preferred metallurgical or welding experience Working Conditions Remains in a stationary position 50% of the time and involves additional physical demands such as ascending/descending stairs, walking stooping and standing.
Quality Control Program Manager Cencore Group LLCQuality Control Program ManagerAnnapolis Junction, MDBachelor's degree in Statistics, Mathematics, Computer Science, Risk Management, Cyber Security, or related field AND 2+ years of experience in one or more of: software development lifecycle, large-scale computing, threat modeling, cyber security, anomaly detection (or equivalent experience). Master's degree in Statistics, Mathematics, Computer Science, Risk Management, Cybersecurity, or related field AND 1+ year of experience in one or more of: security, risk, threat modeling, anomaly detection, or large-scale systems.
Director, Quality Control Samsung Biologics RKVDirector, Quality ControlRockville, Maryland10+ years industrial experience in biopharmaceutical industry, such as Biochemistry, Analytical Chemistry, Microbiology or related field, particularly in the area of assessing physiochemical characteristics of product purity, activity and functional indicators of biological products, along with 8+ years of supervisory and managerial experiences is desired. Analytical and microbiological testing and release of all components, raw materials, excipients, intermediates, active pharmaceutical ingredients (APIs), finished product and stability samples, if applicable.
Quality Control Lead Misfits Market IncQuality Control LeadHanover, MDWe deliver organic produce, high-quality meats and seafood, plant-based proteins, dairy, bakery, wine, and other grocery items to nearly every zip code in 48 states at up to 30 percent off traditional grocery store prices. In 2022, Misfits Market acquired sustainable e-grocer Imperfect Foods and now leverages its in-house transportation network to deliver directly to consumers with one of the most carbon-efficient grocery delivery models on the market.
Quality Control Technician National Beverage CorpQuality Control TechnicianBaltimore, MDField positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn, which may include but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor. Experience in quality control testing procedures and internal and external sanitation of beverage equipment with a clear understanding of all aspects of blending product attributes, recordkeeping, yields, etc.
Quality Control Technician II National Beverage CorpQuality Control Technician IIBaltimore, MDThe employee frequently is required to use hands and fingers, to handle, or feel, sit for long periods of time, stand frequently, bend, squat, reach and turn to access files and office equipment. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor.
Imaging Quality Control Tech Mercy Medical CenterImaging Quality Control TechBaltimore, MarylandMercy Medical Center is honored to be recognized by Newsweek as one of America's Most Trustworthy Companies for three consecutive years (2023–2025) and as one of America's Greatest Workplaces for Women in 2025. Responsibilities: The Radiology Quality Control Technologist acts as resource in facilitating critical results communication between Radiologists and referring providers according to critical results policy guidelines.