Quality Control Inspector DFJ CareersQuality Control InspectorMelbourne, FloridaDassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift.
NewQUALITY CONTROL INSPECTOR Dassault Falcon Jet CorpQUALITY CONTROL INSPECTORMelbourne, FL$38–$55 / hourPart timeDassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift.
NewQUALITY CONTROL INSPECTOR - NDT Dassault Falcon Jet CorpQUALITY CONTROL INSPECTOR - NDTMelbourne, FL$43–$50 / hourPart timeIn addition, this role will be responsible for performing inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to the work performed (if authorized), performing aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft. Dassault Flacon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models.
Quality Control Inspector OSP Inspectors IncQuality Control InspectorMelbourne, FL$25–$30 / hourPrevious experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus). Document inspection findings using detailed field notes, reports, and photo documentation.
Quality Control Supervisor Lockheed Martin CorpQuality Control SupervisorFLOur amazing people are on a mission to make a difference in the world and every single day we use our skills and experiences to create, design and build solutions to some of the worlds' hardest engineering problems. Superior People, Leadership & Communication skills allowing the ability to work with & facilitate communication among a wide range of processing support teams and individuals.
Brand Rep - Audits Merchandising and Quality Control - 24hr ThirdChannel, Inc.Brand Rep - Audits Merchandising and Quality Control - 24hrMelbourne, FLAs an independent Brand Representative, you will act as a key liaison between the brand and retail store environments, conducting recurring in-store visits to perform audits, ensure product quality, and elevate the brand experience. Through innovative in-store retail technology solutions, we bring products to life inside retail environments, helping brands optimize performance and grow in today's dynamic retail landscape.
Senior Quality Control Mechanical Engineer Blue Origin Enterprises LPSenior Quality Control Mechanical EngineerFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Physical Requirements: • Ability to access construction sites and perform inspections in various conditions • May require climbing ladders, working at heights, or in confined spaces • PPE compliance required when visiting job sites • May require travel to project sites.
(USA) Manager, Quality Control Walmart Inc(USA) Manager, Quality ControlCocoa, FL$80,000–$155,000 / yearBachelor's degree in agriculture, Agronomy, Food Science, or related field and 2 years of experience in agricultural quality control, agronomy, food retail management, or related field OR 4 years of experience in agricultural quality control, agronomy, food retail management, or related field. Bachelor's degree in Agriculture, Agronomy, Food Science, or related field and 2 years'' experience in agricultural quality control, agronomy, food retail management, or related field OR 4 years'' experience in agricultural quality control, agronomy, food retail management, or related field.
(USA) Assistant Quality Control Manager - Supply Chain Walmart Inc(USA) Assistant Quality Control Manager - Supply ChainCOCOA, FL$84,000–$126,000 / yearBachelor's degree in Agriculture, Agronomy, Food Science, or related field OR 2 years' experience in food manufacturing or production quality control/assurance, food safety or related field. Programs range from high school completion to bachelor''s degrees, including English Language Learning and short-form certificates.
NewQuality Control Manager (Design/Renovation) (Notional) Acuity International LLCQuality Control Manager (Design/Renovation) (Notional)Cape Canaveral, FLThis position requires full-time on-site presence at the construction location, active engagement with field teams, and coordination with project leadership to ensure compliance and quality assurance throughout all phases of work. Construction professional with a minimum of 10 years of construction experience, including 5 years in construction quality control on projects similar to this contract.
Brand Rep - Audits, Merchandising and Quality Control - $24/hr ThirdChannelBrand Rep - Audits, Merchandising and Quality Control - $24/hrMelbourne, FLAs an independent Brand Representative, you will act as a key liaison between the brand and retail store environments, conducting recurring in-store visits to perform audits, ensure product quality, and elevate the brand experience. Through innovative in-store retail technology solutions, we bring products to life inside retail environments, helping brands optimize performance and grow in today's dynamic retail landscape.
Quality Control Technician FL Moss & Associates LLCQuality Control Technician FLFLThis role supports successful project execution, warranty protection, and project turnover by maintaining accurate documentation, conducting walkthroughs, identifying deficiencies, and communicating project status updates with internal teams and client representatives. Ability to read and interpret engineering drawings, specifications, and construction documents • Strong organizational skills with attention to detail.
Senior Quality Control Electrical Engineer Blue Origin Enterprises LPSenior Quality Control Electrical EngineerFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Preferred Qualifications: • Masters degree in Electrical Engineering or related field • Experience in aerospace, energy, or advanced manufacturing industries • Knowledge of Building Information Modeling (BIM) systems • Familiarity with ISO 9001 quality management systems • Experience with high and medium voltage systems • Background in industrial automation and control systems.
NewExperienced Operations and Support - Quality Control Norsk Hydro ASAExperienced Operations and Support - Quality ControlRockledge, FLThe measurement testing includes, Keyence vision measurement for compliance with dimensional and weld tube specifications by using optical microscope such as IM, VHX and VR, cleanliness testing, tensile testing for mechanical properties. Work independently or within teams to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specific level of knowledge pertaining to new developments, requirements, and policies.
Quality Control, Training, and Field Manager Molly Maid IncQuality Control, Training, and Field ManagerCocoa, FL$16–$25 / hourAll independently owned and operated franchised businesses operate under the service brands' marks, trademarks, trade names, logos, emblems, slogans, or other indicia of origin in connection with the Molly Maid franchise system within a specified geographical area. Neither Molly Maid ("Franchisor") nor its affiliates have the power to : (1) hire, fire or modify the employment condition of franchisee''s employees; (2) supervise and control franchisee''s employee work schedule or conditions of employment; (3) determine the rate and method of payment; or (4) accept, review or maintain franchisee employment records.
Quality Specialist & Production Control – Mechanisms AST SpaceMobileQuality Specialist & Production Control – MechanismsCape Canaveral, FLThis role is responsible for coordinating material flow, conducting inspections, maintaining traceability, and supporting the timely delivery of high-reliability mechanical products. We are seeking a Quality Specialist & Production Control – Mechanisms to support production operations by ensuring materials, components, and assemblies meet established quality and configuration requirements throughout the manufacturing process.
Quality inspector Blue Origin Enterprises LPQuality inspectorFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
ORION NDE Quality Inspector, Senior ASRC Federal Holding CompanyORION NDE Quality Inspector, SeniorMerritt Island, FLJob Description: Non-Destructive Test (NDT) Quality Control (QC) inspector supporting the Orion manned space flight program in the Neil Armstrong Operations and Checkout Facility at Kennedy Space Center, Florida. Prior Aerospace experience with NAS410 or equivalent Level 2 or 3 certification in at least three of the following methods: • Computed Radiography (CR) • Digital Radiography (DR) • Liquid Penetrant (PT) • Eddy Current (ET) • Ultrasonic (UT) • Visual Weld (VT).
Quality Inspector Sidus Space IncQuality InspectorCape Canaveral, FLWith deep heritage in flight-proven technologies, Sidus' portfolio spans LEO, GEO and Lunar satellites, all-domain avionics & GN&C systems, RF payloads, high-performance computing, multi-disciplinary engineering services and artificial intelligence technologies. Sidus Space is an innovative space and defense technology company with core capabilities that include dual use satellite manufacturing & technology integration, AI products and services, space and defense hardware components and space-based data solutions.
Launch Quality Inspector Space Exploration Technologies CorpLaunch Quality InspectorCape Canaveral, FLITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Inspect, verify, and proactively support structures and propulsion development and acceptance testing; assure adherence to design, specification, and testing requirements.
Quality Inspector Extant Components Group Holdings, Inc.Quality InspectorMelbourne, FLWe are seeking a skilled Quality Inspector responsible for a wide variety of quality inspections on aerospace parts and assemblies and assures compliance with a variety of dimensional and contractual requirements of products with complex geometry and configurations. • Inspect dimensions and assembly of various electronic and fabricated products using measuring instruments and devices such as surface plate height gauges, calipers, and micrometers.
CMM Operator/Quality Inspector Sidus Space IncCMM Operator/Quality InspectorCape Canaveral, FLSidus Space (NASDAQ: SIDU) is a space mission enabler providing flexible, cost-effective solutions, including satellite manufacturing and technology integration, AI-driven space-based data solutions, mission planning and management operations, AI/ML products and services and space and defense hardware manufacturing. The CMM Operator/Quality Inspector is responsible for the experienced operation of Coordinate Measuring Machines (CMM) using PC-DMIS software with a background in manual inspection of complex tight tolerance Aerospace manufactured parts.
NewORION Quality Inspector, Senior ASRC Federal Holding CompanyORION Quality Inspector, SeniorMerritt Island, FLRoles and Responsibilities: Performs a variety of electronic or electro-mechanical assembly tasks in support of specific production units, developmental or prototype requirements in product development, manufacturing engineering or preproduction operations where documentation and guidance may be limited. Requirements: High school diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3+ year experience.
Quality Inspector Canopy A&DQuality InspectorCape Canaveral, FloridaTo conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Inspection of received material, in-process and finished components utilizing various types of mechanical and electronic measuring, test equipment and visual inspection, to applicable drawings and specifications.
Quality Assurance Inspector II (Contract) AIRBUS U.S. Space & Defense, Inc.Quality Assurance Inspector II (Contract)Merritt Island, FLFull timeCelebrating over 50 years in the US, we remain a trusted government partner, leveraging world-class satellite, laser communication, rotor and fixed wing solutions to help our national security, defense and space focused customers meet their missions. Execute in-process quality inspections to production sub-assemblies, components or completed assemblies for compliance to customer requirements using measuring equipment.
Quality Inspector I - 2nd Shift Embraer SAQuality Inspector I - 2nd ShiftMelbourne, FLReport deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers. Knowledge, Skills & Abilities: Ability to read technical documents and interprets the information - metric system.
Quality Inspector I - 2nd Shift EmbraerQuality Inspector I - 2nd ShiftMelbourne, FLReport deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers. Proficient in Internet Explorer, Microsoft office (Word, Excel, Power Point, Outlook and Access).
NewQuality Assurance Inspector Dassault Falcon Jet CorpQuality Assurance InspectorMelbourne, FL$42–$52 / hourPart timeDassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Performs Inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated.
Quality Receiving Inspector CACI International IncQuality Receiving InspectorMelbourne, FL$45,900–$91,700 / yearPay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. This role ensures compliance with engineering drawings, specifications, and quality system procedures through detailed inspection, documentation review, and coordination with Quality Engineering and Material Review Board (MRB) when nonconformances are identified.
Quality Engineer III Amentum Services IncQuality Engineer IIIFLWork Environment, Physical Demands, and Mental Demands: Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/organizing skills, and must be able to work under deadlines. Provides leadership for quality assurance and quality control support on assigned program(s) and/or areas to ensure that the product is designed, procured, and installed in accordance with customer and company quality requirements.
Quality Engineer Mainstream EngineeringQuality EngineerRockledge, FLCandidates should be hands-on and be familiar working in a manufacturing/assembly environment dealing with a wide array of products from machined components, plastic molded components, sheet metal, tubing assemblies, wiring harnesses, electronics/PCB, and chemical products for both the military and commercial sectors. Maintaining quality records that document the quality status of incoming material and outgoing products and providing necessary information and cumulative data for internal and external customer responses.
Quality Engineer Mainstream Engineering CorporationQuality EngineerRockledge, FLCandidates should be hands-on and be familiar working in a manufacturing/assembly environment dealing with a wide array of products from machined components, plastic molded components, sheet metal, tubing assemblies, wiring harnesses, electronics/PCB, and chemical products for both the military and commercial sectors. Maintaining quality records that document the quality status of incoming material and outgoing products and providing necessary information and cumulative data for internal and external customer responses.
Quality Engineer II - Optics Leonardo DRS IncQuality Engineer II - OpticsMelbourne, FLProvide technical support for Assembly/Test/Inspection personnel to include executing workmanship improvement plans, developing inspection methods and criteria, specifying appropriate sampling plans, interpreting and revising specifications, and processing non-conforming materials. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours.
Assembly Technician - 1st Shift - Avionics Flight Controls Embraer SAAssembly Technician - 1st Shift - Avionics Flight ControlsMelbourne, FLGenerally at least 8 years or more of experience in area of responsibility with assembly mechanical electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repair. JOB RESPONSIBLITIESPerforms a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic andor mechanical assemblies and subassemblies such as modules boards panels drawers frames and cables.
Automation & Controls Engineer Starship Launch Hardware Space Exploration Technologies CorpAutomation & Controls Engineer Starship Launch HardwareCape Canaveral, FLSpaceXs Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars, and beyond. The successful applicant will work as part of a team of elite engineers designing and improving the electrical and control systems across our rocket launch facility at Cape Canaveral Space Force Base.
Quality Manager - Lunar Blue Origin Enterprises LPQuality Manager - LunarFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Senior Quality Manager Blue Origin Enterprises LPSenior Quality ManagerFLAs part of a hardworking team of Quality employees, your responsibilities will include the following: • Create strategic initiatives in partnership with Operations to drive improvement in Quality, focused on continuous improvement and first-time quality • Lead, coach, and mentor a team of Quality Engineers, Specialists and Inspectors to execute daily manufacturing quality operations • Conduct regular performance reviews, set objectives, and identify professional development opportunities for direct reports • Foster a team culture anchored in accountability, transparency, and continuous improvement • Champion adherence to the AS9100 Quality Management System across manufacturing operations; lead internal audit activities • Identify, prioritize, and lead continuous improvement initiatives using structured methodologies (e.g., DMAIC, Kaizen, 8D) • Develop and track quality metrics and KPIs; prepare variance analyses and initiate corrective actions to address adverse trends • Support preparation and management of the Quality Assurance operating budget, identifying cost reduction opportunities without compromising safety • Partner with Manufacturing Engineering, Design Engineering, Supply Chain, and Test teams to embed quality at every stage of the product lifecycle • Serve as the primary Quality representative during hardware acceptance reviews, launch readiness reviews, and customer audits • Support the Supplier Quality team in addressing supplier nonconformances that impact New Glenn manufacturing • Interface with regulatory agencies (FAA, NASA) and customers as required to communicate quality status and corrective actions. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Data & Control Systems Technician Starship Launch Hardware Space Exploration Technologies CorpData & Control Systems Technician Starship Launch HardwareCape Canaveral, FLITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Assembly Technician - (1st Shift) - [Avionics / Flight Controls] EmbraerAssembly Technician - (1st Shift) - [Avionics / Flight Controls]Melbourne, FLGenerally, at least 8 years or more of experience in area of responsibility with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repair. Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Quality Technician Johnson Service GroupQuality TechnicianMelbourne, FLActively participate on behalf of the quality team both internally and externally on new projects, contract review for quality requirements, RMAs, CARs, production support and general customer service support. Continually seek ways to increase throughput and increase repeatability of the inspection process.
Field Construction Quality Manager BRPH Companies IncField Construction Quality ManagerCape Canaveral, FLBRPH is a technically focused, creative architecture, engineering, and construction company with over six decades of expertise in helping mission-driven clients in the aerospace, defense, manufacturing, commercial, education, entertainment, hospitality, and federal markets identify gaps in their program delivery and develop innovative solutions to their most challenging problems across the U.S. and around the world. SUMMARY: The Field Construction Quality Manager (FCQM) will be responsible for overall quality control and have the authority to act in FCQM matters, including maintaining an effective quality management system (QMS).
NewWeekend Shift- Quality Technician Winchester Interconnect CorporationWeekend Shift- Quality TechnicianMelbourne, FL$50,000–$72,800 / yearWe work with cutting-edge technology and value results-driven, action-oriented professionals who execute priorities efficiently, follow through to completion, and enjoy having fun while delivering exceptional work. Winchester Hermetics is a uniquely specialized design and manufacturing organization supporting the world's leading technology companies in high‑reliability, high‑cost‑of‑failure applications.
Senior Specialist, Quality Engineering (Malabar, FL) L3Harris Technologies IncSenior Specialist, Quality Engineering (Malabar, FL)FLJob Description: This position is responsible for quality improvement related to suppliers and/or subcontractors of printed wire boards (PWB), printed circuit boards (PCB), circuit card assemblies (CCA), and electronic manufacturing services used in development and production. Support the implementation of Zero-Defect Plans (ZDP) with critical electronics suppliers, by assisting them to develop robust processes, perform process/product validations, and recommending manufacturability improvements (process and design).
SOC Quality Assurance Analyst Expert In Recruitment SolutionsSOC Quality Assurance AnalystMelbourne, FLRemoteExperience/Education Requirements: Typically a minimum of three years (3) of technical experience in the security aspects of multiple platforms, operating systems, software, communications and network protocols or an equivalent combination. Advanced computer skills including Microsoft Office suite and other business related software systems (Excel or similar spreadsheet and database applications experience is a must).
Manager Clinical Education CHS - Clinical Quality Health First IncManager Clinical Education CHS - Clinical QualityRockledge, FLPerforms learning needs assessments, serving as an educational resources for CHS clinical and operational leadership groups; tracking education program effectiveness and offering assistance with continuous improvement initiatives. The Manager, Clinical Education, under the direction of the Director of Quality and Safety, oversees the development, coordination, and facilitation of clinical education and competency programs across the Health First Integrated Delivery Network's (IDN) Community Health Services (CHS) division.
Quality Specialist III (B Shift) Blue Origin Enterprises LPQuality Specialist III (B Shift)FLAs part of a hardworking team of Quality specialists, you will support internal health assessments, support continuous improvement efforts, maintain actionable metrics to drive sustainable improvement, monitor and report on manufacturing performing, support the development of control plans and first article inspections, provide preliminary reviews for nonconformance support, initiate and perform stock recalls, as well as managing material review areas and support work order closure reviews for various spaceflight systems. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
Inbound Inspector The Middleby CorpInbound InspectorSebastian, FLNewton CFV collaborates with globally recognized equipment manufacturers, beverage suppliers, convenience store chains, and restaurants to build and incorporate CFV technology in beverage dispensing and sanitizing systems. This role works closely with the Receiving Team and Production to confirm correct parts, inspect for quality and tolerances, and maintain accurate material tracking and documentation.
Certified Welding Inspector, NDE Launch Space Exploration Technologies CorpCertified Welding Inspector, NDE LaunchCape Canaveral, FLMonitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures. Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
Construction Inspector-2604300EJ03 Ardmore RoderickConstruction Inspector-2604300EJ03FLFull timeKey Responsibilities As the primary field representative, this team member ensures contractor adherence to quality assurance (QA) and quality control (QC) protocols by overseeing construction activities to ensure strict compliance with contract documents and regulatory requirements. Salary Range: $62,504-82,784, Ardmore Roderick is providing the compensation range that the company believes it might pay and/or offer for this position, based on the successful applicant’s education, experience, knowledge, skills and abilities in addition to internal equity and specific geographic location.
NewCertified Weld Inspector (CWI) - Aerospace Blue Origin Enterprises LPCertified Weld Inspector (CWI) - AerospaceFLand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Experience in hardware manufacturing processes, (i.e., mechanized welding, machining, cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, working with large assemblies, etc.).