Construction Inspector (On-Call) ParametrixConstruction Inspector (On-Call)Seattle, WashingtonIn this role, you’ll support a range of public infrastructure projects, including roadway and utility construction throughout the Puget Sound region or water and wastewater infrastructure projects in the Yuma, Arizona area. Document field activities, progress, and deviations through detailed daily inspection reports, photos, and communication logs through daily report templates and/or construction software via a laptop or tablet.
Inspector (Transit) Colliers Engineering & DesignInspector (Transit)Seattle, Washington$115,000–$166,400 / yearFull timePrepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Overview: Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.
NDT Inspector Level II (Ultrasonic) ImiaNDT Inspector Level II (Ultrasonic)Seattle, WashingtonRegularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery. Perform NDT inspections using methods such as visual testing (VT), liquid penetrant testing (PT), magnetic particle testing (MT) and ultrasonic testing (UT).
Construction Inspector - Welding/Coating Accura EngineeringConstruction Inspector - Welding/CoatingSeattle, WashingtonJob Title: Construction Inspector- Welding/Coating ***Work Location: Vancouver, WA*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities Observe, inspect, and provide reports on construction projects at federal facilities for compliance with plans and specifications in regard to workmanship, materials, installation, and construction methods. Coating inspection and must have NACE Level II or higher or SSPC Protective Coatings Inspector Level 1 or higher and shall have received formal training in coating inspections and testing of various coating systems and methods of application.
CQM/SSHO/Superintendent MEDC: Tribal OneCQM/SSHO/SuperintendentTacoma, WAFull timeConstruction Quality Manager / Superintendent / SiteSafety and Health Officer (CQM-SSHO) Company: Tribal One ConstructionPosition Title: Construction Quality Manager (CQM) / Superintendent / Site Safety and Health Officer (SSHO)Department: Construction OperationsReports To: Project Manager / Operations ManagerFLSA Status: Exempt Travel Required: None, but preferred. The successful candidate will act as the primary on site representative for quality control, construction management, and safety compliance on federal projects, including those for the U.S. Army Corps of Engineers (USACE), Naval Facilities Engineering Systems Command (NAVFAC), Bureau of Indian Affairs (BIA), National Park Service (NPS), General Services Administration (GSA), and other federal agencies.
Forming Fabricator Sonaca North AmericaForming FabricatorAuburn, WA$20–$24 / hourCompletes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions.
Sheetmetal Fabricator - 2Nd Shift Sonaca North AmericaSheetmetal Fabricator - 2Nd ShiftAuburn, WA$20–$24 / hourCompletes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions.
Electrical Construction Inspector HDR, Inc.Electrical Construction InspectorBellevue, WAIn the role of Electrical Construction Inspector, we'll count on you to: Conduct observations of the installation and acceptance testing for electrical materials, equipment and systems related to civil infrastructure, such as water/wastewater facilities, pump stations and pipelines, marine terminals, railroads, roads and highways, and airports. Our eight Employee Network Groups (Asian Pacific, Black, Hispanic/Latino(a), LGBTQ, People with Disabilities, Veterans, Women, Young Professionals) help create a sense of belonging and foster a supportive environment where everyone is empowered to engage and contribute.
Aviation Maintenance Technician and Inspector BoeingAviation Maintenance Technician and InspectorTukwila, WashingtonThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The Boeing Company Boeing is seeking an Aviation Maintenance Technician and Inspector , who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA .
Construction Inspector (Civil - highways and bridges) Project Solutions Inc.Construction Inspector (Civil - highways and bridges)Seattle, WA$104,000–$121,000 / yearOther experiences may include: Asphalt pavement construction including hot plant inspection; Bridge construction including Portland cement batch plant inspection; Construction staking; Construction traffic control; Drainage structures (ditches, culverts, inlets); Erosion control, landscaping, mulching and seeding; Highway earthwork and grading; Highway materials testing; Miscellaneous highway construction features; Pavement striping; Post tensioned concrete construction; Recycled asphalt construction (milling and grinding); Structural concrete and steel construction; Subgrade and base course construction; Tunnel grouting and rock bolting; Wetlands mitigation and replacement; Retaining walls; Pavement preservation (chip seals, slurry seals, etc.); Underground utilities; and Sanitary sewer systems. Project Solutions Inc. is seeking highly motivated Construction Inspectors to perform project engineering field inspection work and project engineering technical support duties to a variety of civil construction projects with a primary focus on the Western Federal Lands Highway Division (WFLHD) of the Federal Highways Administration (FHWA).
Forming Fabricator SonacaForming FabricatorAuburn, Washington$20–$24 / hourCompletes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions.
Sheetmetal Fabricator - 2nd Shift SonacaSheetmetal Fabricator - 2nd ShiftAuburn, WashingtonCompletes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions.
High Value Residential Insurance Inspector Signature CompaniesHigh Value Residential Insurance InspectorSeattle, WashingtonIf you are an experienced High Value Residential Insurance Inspector who takes pride in accuracy, professionalism, and delivering underwriter-ready reports, we invite you to apply today and continue building your expertise in the high value property space. • High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel.
Construction Inspector in Transportation Foster CM Group, IncConstruction Inspector in TransportationSeattle, WAQualified candidates must have experience in inspection services for rail, transit/transportation (transit/highway/tollway/roadway and bridge) projects and a minimum of 3-5 years' experience working specifically on transportation project elements such as earthwork, embankment, lime treated subgrade, drainage features, bridge structures, drilled shafts, bridge deck pours, structural concrete, retaining walls, asphalt and concrete paving. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, ability to walk on uneven ground while physically maneuvering construction sites, ability to work in extreme temperatures or humidity, and potentially work at heights.
NewCQM/SSHO/Superintendent Tribal OneCQM/SSHO/SuperintendentTacoma, WAThe successful candidate will act as the primary on site representative for quality control, construction management, and safety compliance on federal projects, including those for the U.S. Army Corps of Engineers (USACE), Naval Facilities Engineering Systems Command (NAVFAC), Bureau. Schedule and supervise employees, subcontractors, suppliers, and field personnel.
Commercial Insurance Inspector- (Bremerton, Wa.) EXLCommercial Insurance Inspector- (Bremerton, Wa.)Bremerton, WAMost surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications.
NewResidential Sales Inspector OrkinResidential Sales InspectorTacoma, Washington$60,000–$80,000 / yearFull timeFounded in 1901, Orkin is a global residential and business service provider who provides the most accurate, comprehensive, and efficient pest management services for both residential and commercial customers. Serve as a problem solver for commercial clients by utilizing the in-depth training provided to decide on the best overall pest solution for each customer's needs.
Project Engineer Project Solutions Inc.Project EngineerSeattle, WA$100,000–$125,000 / yearProject Solutions Inc. is seeking a highly motivated Licensed Professional Civil Engineer to provide project management to a variety of civil construction projects with a primary focus on the Western Federal Lands Highway Division (WFLHD) of the Federal Highways Administration (FHWA). Education: Licensed Professional Engineer in Civil Engineering; or Bachelor of Science in Civil Engineering from an Accreditation Board for Engineering and Technology (ABET) accredited school; or Bachelor of Science in Construction Management from an ABET accredited school.
Project Manager (Federal Division) Granite Construction IncProject Manager (Federal Division)Tacoma, WA$121,754–$201,352 / yearServe as Granite's primary project-level point of contact with federal clients and project stakeholders, including NAVFAC, USACE, DoD representatives, contracting officers, resident officers in charge of construction, inspectors, and installation leadership. Any unsolicited resumes sent to Granite, including unsolicited resumes sent to a Granite mailing address, fax machine or email address, directly to Granite employees, or to Granite's resume database will be considered Granite property.
NewQV Inspection Engineer (TE3) State of WashingtonQV Inspection Engineer (TE3)SeaTac, WA$84,520–$113,639 / yearIn addition to maintaining over 20,000 lane miles of state highway and 4,100 bridges, WSDOT leads an award-winning Active Transportation Plan, manages the worlds longest floating bridge, and operates the largest ferry system in the nation! To be considered for this opportunity, the following competencies are required: Engineering Knowledge and Application: Demonstrated understanding of civil engineering principles and experience applying technical knowledge to transportation-related projects and recommending appropriate engineering solutions.