Systems Evaluation Engineer PeopleTec, Inc.Systems Evaluation EngineerHUNTSVILLE, AlabamaFull timeSystems Evaluation Engineers are hands-on technical evaluators who rapidly learn unfamiliar technologies, configure and assess them in development and test environments, and determine their suitability for adoption. If you have any difficulty using our online system and you need an accommodation due to a disability, you may use the following email address, applicationhelp@peopletec.com and/or phone number (256.319.3800) to contact us about your interest in employment with PeopleTec, Inc.
Principal GNC & Trajectory Engineer APEX TK LLCPrincipal GNC & Trajectory EngineerHuntsville, ALIn this role you will provide technical and advisory assistance to Targets Program Office by aiding in the refinement and implementation of Target trajectories in support of the agencies flight test events to validate the weapon and system sensors. Support the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reporting.
Software Engineer Summit TRCSoftware EngineerHuntsville, ALFull timeBe sure to check out our Careers page! https://summittrc.com/Must be a US Citizen with a Secret or higher security clearance. Disability & Accommodation StatementSummit TRC is committed to working with and providing reasonable accommodations to applicants and employees with disabilities.
Software Engineer Senior Staff OASYS, INC.Software Engineer Senior StaffHuntsville, ALFull timeExperience with architectural patterns for embedded systems (layered, component‑based, event‑driven, microkernel) - Proven ability to capture, manage, and trace requirements - Proficiency in modeling tools (UML/SysML, Enterprise Architect, IBM Rhapsody) for architecture documentation Desired Skills: - Experience on programs involving missiles, satellites, launch vehicles, or other high‑reliability platforms - Formal training in software architecture or systems engineering (e.g., TOGAF, SEBoK) - Experience establishing end‑to‑end traceability across hardware, firmware, and verification artifacts in large, multi‑discipline programs - Knowledge of cybersecurity hardening for embedded platforms (secure boot, Trusted Execution Environments, FIPS‑validated crypto) - Exposure to MBSE (Model‑Based Systems Engineering) and SysML integration. offers a robust benefit plan to include: BC/BS of Alabama Heath & Dental, VSP Vision, Employee Stock Ownership Plan (ESOP), 401-K with Matching, Flexible Spending Account, Tuition Reimbursement, Holidays, Vacation, Short-term/Long-term Disability.www.oasys-incorporated.comEOE
Business Process Engineer PeopleTec, Inc.Business Process EngineerHUNTSVILLE, AlabamaFull timeThe Business Process Engineer will work directly with organizational leaders, operational personnel, technical subject matter experts, and process stakeholders to understand how work is currently performed, determine how it should be performed going forward, document the approved process, and translate the process into requirements that developers can implement within ServiceNow. If you have any difficulty using our online system and you need an accommodation due to a disability, you may use the following email address, applicationhelp@peopletec.com and/or phone number (256.319.3800) to contact us about your interest in employment with PeopleTec, Inc.
Systems Engineer Banner Defense, IncSystems EngineerHuntsville, ALResponsibilities: - Perform integrated analysis and evaluation of DoG test events including Flight Tests, Ground Tests, and System Integration Check Out (SICO) activities - Participate in and support engineering milestones such as Preliminary and Critical Design Reviews (PDR/CDR), Test Readiness Reviews (TRRs), and technical assessments - Collaborate with stakeholders across MDA and supporting organizations to coordinate schedules, resolve issues, and ensure technical accuracy - Provide input on secure system design considerations, risk identification, and mitigation strategies - Lead or support technical interchange meetings (TIMs), action tracking, and meeting coordination - Develop executive-level briefings, technical papers, and correspondence for senior leaders, including Flag Officers and SES personnel - Coordinate GENser and SAP-level meetings and VTCs as needed - Represent the Government customer in IPTs, working groups, and forums - Apply engineering tools such as DOORS, Windchill, and Qlik for analysis and coordination - Support efforts related to system security, including compliance tracking or integration of cybersecurity inputs into engineering processes Required Skills/Experience: - Masters in STEM field with 12+ years' experience working on missile defense-related or other DoD program / project - Strong understanding of MDA systems engineering processes and procedures - Demonstrate understanding of system architecture and system - Experience with MDA system elements (e.g., Patriot, THAAD, Aegis, C2BMC) - Familiarity with secure development practices, configuration management, and cybersecurity-informed engineering - Knowledge of the ETM-2 system and experience managing Congressional or routine taskers - Ability to operate independently and communicate effectively across diverse technical teams - Proficiency in Microsoft Office Suite (Outlook, Word, PowerPoint, Excel, Project) - Skilled in developing and delivering technical briefings to senior decision-makers - Active Secret Clearance - Some travel may be required Preferred Skills/Experience - A background that includes exposure to secure system development and cybersecurity-informed engineering practices - Bachelor's degree in STEM in addition to Master's degree in STEM APPLY TODAY! Position Description: Banner Defense is in search of a Senior Systems Engineer to support the Missile Defense Agency's (MDA) Program Office delivering critical capabilities for the Defense of Guam (DoG).
Sr Principal SW Development Engineer UKGSr Principal SW Development EngineerMontgomery, AL$163,900–$235,550 / yearOperating at a principal level, this role goes well beyond traditional requirements gathering—serving as a trusted advisor, systems strategist, and transformation leader across large, multi-phase programs involving D365 Finance & Operations, and integrated enterprise platforms. This role partners closely with Finance and Go To Market teams and IT leadership to translate complex business objectives into scalable, compliant, and future-ready system solutions.
Senior Systems Engineer APEX TK LLCSenior Systems EngineerHuntsville, ALThe selected candidate will ensure the reliability, security, and quality of hardware/software systems, contribute to architectural decisions, and design robust interfaces for seamless integration across MDS platforms. Ensure hardware/software engineering/assurance processes are acceptable and reports are assessed.
NewSolution-Level Software Systems Engineer Aviation & Missile SolutionsSolution-Level Software Systems EngineerHuntsville, ALThe candidate in this role will work with contractors, US military, government civilians and system operators to develop system-level concepts that provide solutions to problems that often involve various systems from multiple product offices. Assembling Artifacts and other information into Solutions Initiative Documents (SIDs) as well as Solutions Engineering Documents (SEDs) and refining Jira tickets as necessary.
Senior Manufacturing Engineer MetreaSenior Manufacturing EngineerHuntsville, AL$120,000–$140,000 / yearReporting to the SHADOWLAB Senior Principal Systems Engineer, Electromagnetics and Cyber Group (EM&C), and supporting Metrea's overall engineering efforts, the Senior Manufacturing Engineer will join our busy team specializing in state-of-the-art military communications and signals intelligence products. Electromagnetic and Cyber Group (EM&C) is responsible for developing flexible and survivable advanced electronic warfare and secure communications equipment while providing the industry's leading signals intelligence, electronic warfare, and cyber experts.
Mechanical Engineer- Mid Level Aviation & Missile SolutionsMechanical Engineer- Mid LevelHuntsville, ALThe candidate will also be responsible for bill of material development and component specification for mechanical assemblies and must be able to apply engineering design processes, such as design for manufacture, drawing production, configuration management, and integration to the development of complex mechanical systems. Experience with electrical cable and wire harness design and routing principles such as EMI separation, military connectors and backshells, shielding and overbraid, splicing, minimum bend radius, chafe protection, electrical bonding, and grounding.
Radar Threat Systems- Entry Level Engineer Aviation & Missile SolutionsRadar Threat Systems- Entry Level EngineerHuntsville, ALEnsure foreign threat systems are accurately characterized and modeled in technical databases such as the Electronic Warfare Integrated Reprogramming Database (EWIRDB). (AMS) is seeking a talented Electrical or Computer Engineer to join our diverse team, in Huntsville, AL., to create unique solutions for complex problems.
Sr. Staff Safety Engineer AerovironmentSr. Staff Safety EngineerHuntsville, AL$133,500–$203,750 / yearBachelor's degree in Systems Engineering, Mathematics, Computer Science/Engineering, Electrical Engineering, Aerospace, Mechanical Engineering, or related field; or an equivalent combination of education, training, and experience. Master's degree in Systems Engineering, Mathematics, Computer Science/Engineering, Electrical Engineering, Aerospace, Mechanical Engineering, or related field from an ABET-accredited institution.
Manufacturing Engineer III AerovironmentManufacturing Engineer IIIHuntsville, AL$91,000–$138,750 / yearOther Qualifications & Desired Competencies: Specific experience with sheet metal fabrication, plastics, composite layups, printed circuit board assembly, mechanical assembly, calibration and testing processes is desired. In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.
MODEL BASED SYSTEM ENGINEERS - General Consideration QTEC AerospaceMODEL BASED SYSTEM ENGINEERS - General ConsiderationHuntsville, ALFull timeJob Duties/ResponsibilitiesResponsibilities may include, but are not limited to the following: Perform Systems Engineering functions such as requirements decomposition and interface definition Complete use case development and preparing systems engineering artifacts as a part of program Cross-Functional Product Teams to implement customer-requested capabilitiesFollow an Agile framework to manage the backlog and document progressEnsure the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraintsPerform functional analysis, timeline analysis, detailed trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specificationsWork with teams crossing multiple functions in order to drive data connectivity from architecture to requirements to test Minimum Education and ExperienceBachelor's degree in Systems Engineering or a related STEM field with at least 2 years' related experience Required Knowledge, Skills and AbilitiesMust be able to support an in-person / closed-area work environment dailyExperience with Model Based Systems Engineering (MBSE) processes and related tools (e.g., Cameo, MagicDraw)Should possess the ability to be part of an integrated team tasked with developing and maintaining the physical, functional, and technical requirements baselinesSkills in generating system/element level functional, performance, and interface specifications to document and control the achievement of the desired capabilitiesExcellent verbal and written communication skills, including ability to collaborate with cross-functional teams, and prepare and brief presentations to the customer as neededSelf-motivated and customer-oriented Desired Knowledge, Skills and AbilitiesThe candidate should have an understanding of the Systems Engineering 'V' and be capable of performing engineering analysis, requirements allocation, requirements decompositionExperience in mission analysis with skill in the development of use cases, sequence diagrams, and creation of Interface DocumentsExperience with requirements solicitation, derivation, and decomposition to lower-level subsystems and componentsExperience using Atlassian Tools such as JIRAFamiliar with Agile terminology and best practicesExpert in all MS Office applications and familiarity with DOORSFamiliar with Systems Modeling Language (SysML) Security ClearanceCandidates must currently have and be able to maintain a minimum DoD SECRET level security clearance. The successful candidates will function as an integral member of a multi-contractor team providing program, engineering, and technical support to Defense programs.
SYSTEMS ENGINEER - General Consideration QTEC AerospaceSYSTEMS ENGINEER - General ConsiderationHuntsville, ALFull timeJob Duties/ResponsibilitiesResponsibilities may include, but are not limited to the following areas:System concept developmentSystem and software requirements engineeringRequirement verification planning and executionSystem performance analysis planning and executionDeveloping and capturing technical products using program processes and toolsPreparing technical documentation which reflects engineering artifactsOther duties as assignedMinimum Education and ExperienceBachelor's degree in an engineering (or a related field) or equivalent professional experienceRequired Knowledge, Skills and AbilitiesMust be able to support an in-person / closed-area work environment dailyExperience with Microsoft Office ProductsExperience with systems engineering concepts throughout the acquisition life cycleExcellent verbal and written communication skills, including ability to collaborate with cross-functional teams, and prepare and brief presentations to the customer as neededSelf-motivated and customer-orientedDesired Knowledge, Skills and AbilitiesExperience with DOORS Experience with Rhapsody, Cameo or similar modeling toolsMissile Defense System Development experience is a plusSecurity ClearanceCandidates must currently have, or be able to obtain, and maintain a minimum DoD SECRET level security clearance. Job SummaryThe successful candidates will function as an integral member of a multi-contractor team providing program, engineering, and technical support to Missile Defense programs.
SOFTWARE ENGINEER QTEC AerospaceSOFTWARE ENGINEERHuntsville, ALFull timeUnder minimal direction, the candidate will provide specialized expertise across multiple systems and software disciplines, as well as general knowledge of related disciplines, application implications, and customer areas. The successful candidate will function as an integral member of a multi-contractor team providing program, engineering, and technical support to Missile Defense programs.
Software Systems Engineer LeidosSoftware Systems EngineerHuntsville, AlabamaJuly 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. The ideal candidate will have strong defense industry experience, expertise in requirements development and management, and hands-on experience with Model-Based Systems Engineering (MBSE) methodologies and tools including Cameo and Jama.
Electrical Engineer- Environmental Test Lab LeidosElectrical Engineer- Environmental Test LabHuntsville, AlabamaLeidos’ Defense Systems / Manufacturing Sector is seeking a talented and qualified Mid-Level Electrical Engineer to join our Defense team in Huntsville, AL supporting the Common Hypersonic Glide Body (CHGB) Program. July 24, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
SYSTEMS SAFETY ENGINEER QTEC AerospaceSYSTEMS SAFETY ENGINEERHuntsville, ALFull timeAt least 2 years of experience with requirements decomposition and managementWorking knowledge of systems engineering principles and processesVerification experience or knowledgeExperience with requirements management tools such as DOORSExperience developing Certification or Verification packages for all levels of requirements (including safety requirements for operations, flight test, and ground test)Experience developing systems engineering and systems safety products in an Agile environmentSystem Safety Engineering experience conducting comprehensive system safety analyses IAW MIL-STD-882E, including Preliminary Hazard Analysis (PHA), Functional Hazard Analysis (FHA), System Hazard Analysis (SHA), and Operating & Support Hazard Analysis (O&SHA) to ensure compliance and mitigate operational risksMissile Defense Weapon System experience Desired Knowledge, Skills and AbilitiesExperience with Requirement Verification methods such as TestAssociate Safety Professional (ASP) / Certified Safety Professional (CSP) CertificateDemonstrated independent planning, organization, and working in cross-functional teams with a customer focusFamiliarity with Model Based Systems Engineering (MBSE) and associated toolsINCOSE or System Engineering certification Security ClearanceCandidates must currently have and be able to maintain a minimum DoD SECRET level security clearance. Job Duties/ResponsibilitiesResponsibilities will include, but may not be limited to the following: The candidate will thrive in a fast-paced work environment with high expectations, significantly diverse assignments, collaborative/teams comprised of all experience levels Minimum Education and ExperienceBachelor's degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 5 years of related work experience, or a Master's Degree in STEM and 3 years of related work experience, or a PhD.