Mechanical/AM Engineer University of Dayton, OhioMechanical/AM EngineerDayton, OhioPreferred Qualifications: While not everyone may possess all of the preferred qualifications, the ideal candidate will bring many of the following: 1. 5+ years of experience performing FEA analysis using ANSYS to include static and dynamic analysis. As well, this engineer will be responsible for the overall development effort as a "Product Owner" following all product development process steps for the project and collaborate with various groups for manufacture and qualification test, through project completion.
Bridge Engineer/Project Manager Harrison Consulting SolutionsBridge Engineer/Project ManagerCleveland, OhioAn industry leading multi-disciplinary team is looking for a Bridge Engineer/Project Manager for their Cleveland, Ohio team! Prepare preliminary/detailed design plans, quantities, specifications and cost estimates.
EO/IR Engineer University of Dayton, OhioEO/IR EngineerDayton, OhioThis position is responsible for analyzing the modulation transfer function, effective focal length, back focal length, depth of focus, distortion, and field of curvature for optical lenses along with the minimum resolvable temperature difference (MRTD), noise equivalent temperature difference (NETD), signal transfer function (STF) for Short-wave infrared (SWIR), medium (or mid)-wave infrared (MWIR), long-wave infrared (LWIR) and visible sensors. - Proven experience in using EO/IR multi sensor fusion system engineering to obtain the performance characteristics, capabilities, limitations, and vulnerabilities of various SWIR/MWIR/LWIR and visible sensors.
PNT Engineer University of Dayton, OhioPNT EngineerDayton, OhioThis position is responsible for the performance characteristics, capabilities, limitations, and vulnerabilities of global navigation satellite system (GNSS) receivers to include acquisition and tracking sensitivity, time to first fix, operational limits of acceleration, altitude, and velocity, accuracy of the navigation solution, etc. Preferred Qualifications: While not everyone may possess all of the preferred qualifications, the ideal candidate will bring many of the following: - Masters degree in Electrical Engineering or related field, with 12 years experience in RF systems; or Ph.
Associate Process Engineer University of Dayton, OhioAssociate Process EngineerDayton, OhioR2) - Must meet R1 minimums in addition to: • BS in Engineering (Mechanical, Aerospace, Chemical, Materials, Industrial, or equivalent) and 3+ years of relevant experience OR MS in Engineering (Mechanical, Aerospace, Chemical, Materials, Industrial, or equivalent) and 2+ years of relevant experience OR in the absence of a degree, 7 years of direct, relevant work experience is required. This role will create CAD models and additive manufacturing build files to support material property development and/or product development processes and will create the associated manufacturing routers for processing builds.
Principal Engineer Kadant Black ClawsonPrincipal EngineerLebanon, OhioFull timeThis role acts as an individual contributor with technical leadership responsibilities to plan and oversee activities related to the successful execution of R&D and new product development projects, including research, concept development, prototyping, design, testing, manufacturing readiness, and risk management. Acts as a technical lead at customer sites; visits customers to help solve problems, research customer needs, and field new products.
Senior Systems Project Engineer University of Dayton, OhioSenior Systems Project EngineerDayton, OhioPosition Summary: We are seeking an experienced project engineer to provide technical leadership and direct technical contribution for multiple projects related to aircraft, ground support equipment, and vehicle sustaining engineering. The ideal candidate will: • Interface with USAF hardware owners and teams to identify and document equipment end items and components in support of lifecycle management (LCM) activities and service life extension programs (SLEP).
NDI Engineer University of Dayton, OhioNDI EngineerDayton, OhioMinimum Qualifications: • Bachelor's degree in mechanical engineering, materials engineering, aerospace engineering, or closely related engineering discipline with 3 years of experience. Position Summary: The University of Dayton Research Institute (UDRI) is seeking a highly motivated NDI Engineer to join our dynamic team in the Structural Materials division.
Manufacturing Engineer American Axle & ManufacturingManufacturing EngineerBowling Green, OHFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. About Dauch: Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.
Plant Engineer CROWN Beverage PackagingPlant EngineerDayton, OhioDemonstrated knowledge and experience with modern equipment maintenance (TPM), high-speed forming presses, electrical, chilled water systems, compressed air systems, building maintenance, wastewater treatment, printing presses and curing ovens. Reporting directly to the Plant Manager, the Plant Engineer responsibilities would include, but not be limited to, the following: Design, implement and maintain preventive as well as predictive maintenance programs.
DevOps Site Reliability Engineer Rogue FitnessDevOps Site Reliability EngineerColumbus, OhioAs a DevOps Site Reliability Engineer (SRE), you will be responsible for designing, implementing, and maintaining our application infrastructure to ensure that these systems are highly available, scalable, and reliable. Rogue Fitness is the leading manufacturer of strength & conditioning equipment and Official supplier to the CrossFit Games, USA Weightlifting, the World’s Strongest Man and the Arnold Classic.
Avionics Engineer B-2 Div (Wbz) 01.6.14/15 CredenceAvionics Engineer B-2 Div (Wbz) 01.6.14/15Wright-Patterson Air Force Base, OHMust have an ABET accredited Master’s or Doctorate Degree in a related field and ten (10) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; OR must have an ABET accredited Bachelor’s Degree in a related field and twelve (12) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an ABET-accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering. Assist in producing or reviewing technical evaluations/plans; engineering studies, reports, and analyses; acquisition strategies/plans; ICD; CDD; CONOPS; CPD; system requirements documents; system specifications; RFPs; SEP; TEMP; ISP; PPP; cybersecurity plans; security authorization package documentation; CCA compliance documentation; and other program, technical, and weapon system contractor-produced artifacts as required.
Radar / Electronic Warfare Engineer B-52 Div (Wbd) - 1.3.14 CredenceRadar / Electronic Warfare Engineer B-52 Div (Wbd) - 1.3.14WPAFB, OHUtilize MIL-HDBK-516 Airworthiness Certification Criteria to determine applicable requirements, work with base engineering to verify assigned systems and subsystems meet established criteria and work with other agencies as required, to achieve a desired level of certification. Assist in accomplishing data processing including centroiding, tracker, timing issues, data loading issues, software; interfaces to combat system and/or automation systems including required data, quantity of data, data merging and integration.
Project Engineer Marous Brothers ConstructionProject EngineerColumbus, OHLocated on The Ohio State University's campus, this onsite position offers you the exhilarating opportunity to shape innovative projects that leave a lasting impact. Join Marous Brothers Construction as a Full-Time Project Engineer, also known as Assistant Project Manager, and elevate your career to new heights!
NewSenior Model Based Definition Engineer - Secret Clearance Quest Defense Systems and SolutionsSenior Model Based Definition Engineer - Secret ClearanceCincinnati, Ohio$78,000–$88,000 / yearCollaborative Engineering: Work with cross-functional teams to define dimensional constraints and geometric tolerances, ensuring optimal manufacturing processes. Design Excellence: Create detailed 2D cross-sections, 3D models, and Model-Based Definitions (MBD) within Siemens NX and Teamcenter environments.
Bridge Design Project Engineer IV AECOMBridge Design Project Engineer IVColumbus, OH$110,000–$175,000 / yearThis career enhancing position will involve performing transportation structure design analysis, including plan preparation of structures in Texas and exposure and contributing to project work throughout the Western U.S. This important role offers participation in a variety of challenging projects such as the and a dynamic work environment due to the number, type and size of bridges that make up the vast portfolio of the experienced bridge group this engineer will be joining. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.
NewTest Engineer Intellectt INCTest EngineerRaymond, OHSeeking a Test Engineer with experience in mechanical product development, 3D CAD design, engineering analysis, and project execution . Experience with 3D CAD modeling, mechanical design, BOM creation, engineering analysis, and product development.
NewSenior Manufacturing Engineer AAMSenior Manufacturing EngineerBowling Green, OhioFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.
NewSenior Manufacturing Engineer American Axle & ManufacturingSenior Manufacturing EngineerBowling Green, OHFormed through the acquisition of Dowlais Group plc and its subsidiaries - GKN Automotive and GKN Powder Metallurgy, Dauch unites deep engineering roots with global manufacturing capabilities and an entrepreneurial spirit to move mobility forward. About Dauch: Dauch Corporation is a premier Driveline and Metal Forming supplier serving the global automotive industry with a powertrain-agnostic product portfolio that supports electric, hybrid, and internal combustion vehicles.
NewAvionics Engineer B-2 Div (Wbz) 01.6.15 CredenceAvionics Engineer B-2 Div (Wbz) 01.6.15Wright-Patterson Air Force Base, OHMust have an ABET accredited Master’s or Doctorate Degree in a related field and ten (10) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; OR must have an ABET accredited Bachelor’s Degree in a related field and twelve (12) years of experience in the respective technical/professional discipline being performed, five (5) years of which must be in the DoD; For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an ABET-accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering. Assist in producing or reviewing technical evaluations/plans; engineering studies, reports, and analyses; acquisition strategies/plans; ICD; CDD; CONOPS; CPD; system requirements documents; system specifications; RFPs; SEP; TEMP; ISP; PPP; cybersecurity plans; security authorization package documentation; CCA compliance documentation; and other program, technical, and weapon system contractor-produced artifacts as required.