FULL_TIME

FEED

HOUR

As a Tool and Die Maker you would be using various machine tools and auxiliary equipment working form blueprints, sketches and verbal directions build, repair and revise molds and dies, build jugs and fixtures and any spare parts for mold and dies. Benefits: Comprehensive Medical Coverage, Wellness Programs, Health Savings Account (HSA), Dental and Vision Insurance, Flexible Spending Accounts (FSAs), Life and AD&D Insurance, Disability Insurance, Maternity and Parental Leave, Employee Assistance Program (EAP), and Financial Wellness Programs.

Tool & Die Maker in Concord, NC Pay: $35.50 - $37.50 per hour based on experience 1st Shift Full time, Excellent Pay & Benefits Job Summary: We are looking for a Tool & Die Maker in Concord, NC. As a Tool and Die Maker you would be using various machine tools and auxiliary equipment working form blueprints, sketches and verbal directions build, repair and revise molds and dies, build jugs and fixtures and any spare parts for mold and dies. Benefits: Comprehensive Medical Coverage, Wellness Programs, Health Savings Account (HSA), Dental and Vision Insurance, Flexible Spending Accounts (FSAs), Life and AD&D Insurance, Disability Insurance, Maternity and Parental Leave, Employee Assistance Program (EAP), and Financial Wellness Programs Main Job Duties and Responsibilities:<ul><li>Machines, tools and equipment used:  Vertical and horizontal mills, lathes, surface grinders, drills saws and assorted measuring tools.</li><li>Materials used: Aluminum, mild steel, A2, A6, D2, S7, 01, CPM10V, CPMm4, brass, copper, Stainless steels, plastics, phenolics and others.</li><li>While there is no formal procedure in any job assignment in the Tool Room, the tool maker must be able to plan his work and all the various stages to obtain completion of a job in a cost-effective manner.  Example: cut raw stock, mill, drill, grind, heat treat, finish grind, EDM.</li><li>Work directly with engineers and other technical personnel to make changes in tooling and build jigs, fixtures and gages.  Make vendor contacts.</li><li>Total responsibility to eliminate non-conformance within quality of products</li><li>All other work as directed by supervisor.</li></ul>Education:   Required to be able to read, write and perform basic math. Prefer high school degree or GED.  Experience: <ul><li>Must have completed a certified Tool & Die apprenticeship</li></ul>Skills/Knowledge/Abilities: <ul><li>Basic reading and writing skills in English</li><li>Math skills   </li><li>Able to communicate effectively </li><li>Able to lift up to 40 lbs.</li><li>Able to work overtime when necessary</li><li>Able to stand the majority of the work day.</li><li>Able to perform repetitive job functions; hand mobility, bending, kneeling,</li><li>pushing, and pulling.</li><li>Manual dexterity required for assembly and operating tools and</li><li>machines.</li><li>Ability to safely operate moving equipment properly without risk to self,</li><li>others and equipment. </li></ul>Personal Protective Equipment Required to be worn:<ul><li>Hearing Protection</li><li>Eye Protection</li></ul>Certifications Prefer:<ul><li>Journeyman’s Certificate.</li></ul>  EOE Thank you for your interest in Impact Workforce Solutions, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program. Powered by JazzHR

Impact Workforce Solutions

Tool and Die Maker

Blueprints

Communication Skills

English Language

Lathe

Lift/Move 40 Pounds

Machine Tool

Manual Dexterity

Mathematics

Risk

Secondary School

Surface Drilling

Tool and Die Manufacturing

Writing Skills

partner JazzHR

YEAR

Preferred Qualifications: Candidate must have some or all of the following Educational/Technical requirements: High school diploma or equivalent; technical or vocational training in CNC operation is highly preferred. While performing the duties of this job the employee is regularly required to stand, walk, sit, stoop, squat and reach, grasp, push and pull using arms and legs.

Key Responsibilities: <ul><li>Must work with production Team in all aspects of production to ensure parts produced adhere to IFAB Corp & Customer standards and dimension tolerances. </li><li>Responsible for repairing stamp tooling. </li><li>Filling out and filing Preventative Maintenance Sheets. </li><li>Change over tooling and remove punches for sharpening and replacement. </li><li>Trouble shooting tooling and adjust achieve a good part. </li><li>Be present at new tooling try outs or engineering changes to ensure safety for operators and equipment. </li><li>Recommend if tooling will need to be sent out for repair. </li><li>Keeping the work area clean and machines wiped down. </li><li>Notify supervisor of any problems. </li><li>Maintains spare and change over tooling so it can be located when needed. </li><li>Must have the hand tools required to repair tooling. </li></ul>Preferred Qualifications: Candidate must have some or all of the following Educational/Technical requirements: <ul><li>High school diploma or equivalent; technical or vocational training in CNC operation is highly preferred. </li><li>Previous tool and die experience two years. </li><li>Knowledge of stamping tools, both progressive and transfer, as well as basic press and feeder knowledge required. </li><li>Knowledge of press safety and feed speed of tool room equipment required. </li><li>Must have good machining skills including setup and be able to machine a component to set dimensions. </li><li>Journeyman card or apprenticeship certificate preferred. </li></ul>Preferred skills and abilities: Candidate must have some or all the following skills and abilities: <ul><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to communicate efficiently in both written and oral form. </li><li>Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to work with mathematical concepts such as probability and statistical inference preferred. </li><li>Ability to apply common sense understanding to carry out detailed but involved written or oral instructions and to deal with problems involving a few concrete variables in standardized situations. </li><li>While performing the duties of this job the employee is regularly required to stand, walk, sit, stoop, squat and reach, grasp, push and pull using arms and legs. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include the ability to adjust focus. </li></ul>Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level and air quality are usually moderate. The employee will encounter hydraulic and other oils as well and various types of metal components. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR

IFab Corporation

Tool & Die Maker

Air Quality

CNC (Computerized Numerical Control) Systems

Concrete

Educational Technology

Hand Tools

High School Diploma

Identify Issues

Lift/Move 25 Pounds

Lift/Move 50 Pounds

Machining

Preventative Maintenance

Team Player

OTHER

UNKNOWN

Stafford Cutting Dies in Indian Trail, NC is looking for motivated, hands-on individuals ready to learn a skilled trade and build a real career in manufacturing. Manufacturing Associate – Steel Rule Die Maker (Paid Training Provided)Stafford Cutting Dies | DFC Manufacturing Group | Indian Trail, NC.

Manufacturing Associate – Steel Rule Die Maker (Paid Training Provided)Stafford Cutting Dies | DFC Manufacturing Group | Indian Trail, NCNo Experience? No Problem. We'll Train You.Stafford Cutting Dies in Indian Trail, NC is looking for motivated, hands-on individuals ready to learn a skilled trade and build a real career in manufacturing. If you're mechanically inclined and show up ready to work, we'll teach you everything else - and pay you while you learn.Compensation $18–$20/hour | Paid On-the-Job TrainingWhat You'll Learn<ul><li>How to build and repair precision steel rule cutting dies used in manufacturing</li><li>Safe operation of tools and specialized die-making equipment</li><li>How to read production instructions and basic drawings</li><li>Quality inspection and accuracy standards</li></ul>What You'll Do<ul><li>Cut, bend, and install steel rule into die boards</li><li>Assist with building and repairing dies to customer specifications</li><li>Inspect your own work for quality and accuracy</li><li>Support production teams and maintain a clean, safe workspace</li></ul>What We're Looking For<ul><li>High school diploma or GED</li><li>Comfortable using tools -- or genuinely eager to learn</li><li>Ability to read a tape measure to 1/32"</li><li>Reliable, detail-oriented, and ready to work</li><li>Able to meet the physical demands of the role, including standing for extended periods and lifting up to 65 lbs</li></ul>Bonus Points (Not Required)<ul><li>Any manufacturing, warehouse, or hands-on experience</li><li>Trade school, vocational, or technical training background</li></ul>Why Stafford Cutting Dies<ul><li>$18--$20/hour starting wage</li><li>Paid, on-the-job training from day one</li><li>Learn a specialized, in-demand trade skill</li><li>Real career growth in a stable manufacturing environment</li><li>Supportive, team-oriented workplace in Indian Trail, NC</li></ul>How to Apply Ready to start your career in manufacturing? Visit <a href="http://www.gostafford.com" rel="nofollow">www.gostafford.com</a> and follow the Application link to apply today. Positions fill quickly -- don't wait.

Stafford Cutting Dies

Manufacturing Associate – Steel Rule Die Maker (Paid Training Provided) Stafford Cutting Dies | DFC Manufacturing Group | Indian Trail, NC

Detail Oriented

Manufacturing

Physical Demands

Production Support

Property Maintenance

Quality Control

Safety/Work Safety

Steel Industry

Training/Teaching

Warehousing

Talent Acquisition

Tool and Die Makers jobs in Concord, NC - find them here! Apply today to the top opportunities near you.

Top Tool and Die Makers Jobs in Concord, NC | Monster

Tool and Die Makers Jobs in Concord, NC

Jobs

Resume Resources

Get noticed by top employers!

Tool and Die Makers Jobs in Concord, NC

Jobs

Tool and Die MakerImpact Workforce Solutions

Tool & Die MakerIFab Corporation

Manufacturing Associate – Steel Rule Die Maker (Paid Training Provided) Stafford Cutting Dies | DFC Manufacturing Group | Indian Trail, NCStafford Cutting Dies

Resume Resources