Payload Launch Control Systems Engineer - Entry Level General Dynamics CorpPayload Launch Control Systems Engineer - Entry LevelGroton, CTThe D440 SSN Payload Launch Control department is responsible for systems, hardware, test, and project engineering for the design, development, and qualification of payload launch control and handling systems and components supporting VIRGINIA, SSNX, and AUKUS class submarines and other payload platforms. These systems are mission and safety critical and comprised of embedded closed loop complex electronic control systems having stringent safety and security requirements, in addition to requiring high reliability, availability, maintainability and usability.
Principal Systems Engineer /Sr Principal Systems Engineer Northrop Grumman CorpPrincipal Systems Engineer /Sr Principal Systems EngineerGroton, CT$108,800–$163,200 / yearBasic Qualifications for the Sr Principal Systems Engineer: Bachelor's Degree in a STEM discipline (Science, Technology, Engineering or Math) and 8 or more years of work experience in Submersible Ship Ballistic Nuclear (SSBN), or Ship Submersible Guided Missile Nuclear (SSGN), or Strategic Weapons Systems operations, or Shipyard Integrated Test Program, or Electrical Engineering or Mechanical Engineering or System Engineering. Basic Qualifications for the Principal Systems Engineer: Bachelor's Degree in a STEM discipline (Science, Technology, Engineering or Math) and 5 or more years of work experience in Submersible Ship Ballistic Nuclear (SSBN), or Ship Submersible Guided Missile Nuclear (SSGN), or Strategic Weapons Systems operations, or Shipyard Integrated Test Program, or Electrical Engineering or Mechanical Engineering or System Engineering.
NewD442 SONAR Hull Arrays Engineer General Dynamics CorpD442 SONAR Hull Arrays EngineerGroton, CTAreas of responsibility include Large Aperture Bow (LAB) Array, Light Weight Wide Aperture Array (LWWAA), High Frequency Chin Array (HFCA), CAVES Bow Conformal Array, SSN(X) concept arrays and sensors and various Government Furnished Equipment (GFE) SONAR sensors, arrays and components. The successful engineer will perform systems engineering efforts from initial concept, system design and development through hardware/software integration, component qualification, testing, construction support, delivery and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues and identification of components for technical refresh.
DUV FLS Production Engineer ASMLDUV FLS Production EngineerWilton, ConnecticutCandidate will work with cross-sectors employees to provide rapid response to resolve disturbance notices related to engineering issues and to perform the engineering steps listed in the production operator dashboard (POD) to support output. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers – to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.
Senior Structures Engineer (Onsite) RTX CorpSenior Structures Engineer (Onsite)East Hartford, CTDepartment/Segment Overview: Mechanical Systems, Externals, & Nacelles (MSEN): The Mechanical Systems, Externals, and Nacelles Engineering organization is responsible for the design, development, and in-service support of power transmission systems, bearing compartment and rotor support design and analysis, oil and thermal management systems, engine externals packaging and architecture, as well as nacelles for commercial and military engine models. Technical disciplines include Project Engineering, Mechanical Design, Structural Analysis, Product Definition, System Modeling, Mechanical Design analysis for bearings, gears, and seals, and fluid-thermal modeling of associated components and systems.
CORE Coatings Manufacturing Engineer (Onsite) RTX CorpCORE Coatings Manufacturing Engineer (Onsite)East Hartford, CTWe are seeking a highly motivated, technically talented individual, who has a true desire to work in a dynamic operations environment to support our Core Manufacturing Engineering Organization as a Manufacturing Engineer expert for coating processes such as Air Plasma Spray, HVOF, Wire Spray, Anti-gal, Sermatel, and many other aerospace coating systems. Support Pratt & Whitney's Core Manufacturing Engineering (ME) Organization as a subject-matter expert for coating processes including Air Plasma Spray, HVOF, Wire Spray, Anti-Gal, Sermatel, and other aerospace coating technologies.
NewEntry Level Component Engineer General Dynamics CorpEntry Level Component EngineerGroton, CTComponent Engineers perform varied project management tasks including program planning, specification and procedure development, preparation of technical correspondence, technical manual review, coordination with other Electric Boat departments, review of vendor deliverables (drawings, design reports, procedures, technical correspondence, calculations and test reports), qualification and production test support, supplier oversight, and cost and schedule control. D372 Component Engineering designs and develops propulsion plant and non-propulsion components supporting new design fast attack programs within VIRGINIA Class and the next generation attack boat SSN(X).
NewD442 SONAR Hull Arrays Engineer General Dynamics Electric BoatD442 SONAR Hull Arrays EngineerGroton, ConnecticutFull timeAreas of responsibility include Large Aperture Bow (LAB) Array, Light Weight Wide Aperture Array (LWWAA), High Frequency Chin Array (HFCA), CAVES Bow Conformal Array, SSN(X) concept arrays and sensors and various Government Furnished Equipment (GFE) SONAR sensors, arrays and components. The successful engineer will perform systems engineering efforts from initial concept, system design and development through hardware/software integration, component qualification, testing, construction support, delivery and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues and identification of components for technical refresh.
NewD442 SONAR Hull Arrays Engineer Electric Boat CorpD442 SONAR Hull Arrays EngineerNew London, CTAreas of responsibility include Large Aperture Bow (LAB) Array, Light Weight Wide Aperture Array (LWWAA), High Frequency Chin Array (HFCA), CAVES Bow Conformal Array, SSN(X) concept arrays and sensors and various Government Furnished Equipment (GFE) SONAR sensors, arrays and components. The successful engineer will perform systems engineering efforts from initial concept, system design and development through hardware/software integration, component qualification, testing, construction support, delivery and post-delivery support to include analysis and resolution of fleet identified problems, assessment of obsolescence issues and identification of components for technical refresh.
senior-electrical-engineer-substation-northeast-region Burns & McDonnellsenior-electrical-engineer-substation-northeast-regionWallingford, CT$150,000–$240,000 / yearLeads the preparation and development of substation design packages including-but not limited to-physical arrangement above and below grade, protective relaying and control, electrical studies such as grounding and lightning analysis, and lighting and security. Job: Engineering Primary Location: US-CT-Wallingford Other Locations: US-NJ-Morristown, US-MA-Newton, US-ME-Portland, US-PA-Conshohocken Schedule: Full-time Travel: Yes (20% of the Time) Req ID: 261235 Job Hire Type: Experienced LI-JNH T&D NA.
staff-electrical-engineer-substation-northeast-region Burns & McDonnellstaff-electrical-engineer-substation-northeast-regionWallingford, CT$105,000–$175,000 / yearBachelor Degree in Electrical Engineering, Mechanical Engineering, or related degree from an ABET accredited program and 3 years of substation engineering experience (consulting preferred/required). Description The Staff Substation Engineer will work under the supervision of a licensed professional engineer to develop design deliverables for new and modified high-voltage 13kV to 765kV electrical power substation projects.
Quality Engineer III ResoneticsQuality Engineer IIIBethel, Connecticut$65,000–$102,000 / yearFull timePartners with senior technical leaders (internal and external to the organization) to develop innovative approaches for identifying technical opportunities and quality improvements. Overview: Resonetics is a global leader in advanced engineering, prototyping, product development, and micro manufacturing, driving innovation in the medical device industry.
NewSenior Manufacturing Engineer Illinois Tool Works IncSenior Manufacturing EngineerWaterbury, CT$99,000–$130,000 / yearJob Description: Position Objective: The Manufacturing Engineer will support the manufacturing area by developing a deep understanding of the customers' needs and application requirements, and then developing and implementing new processes for operations. Essential Functions: Research, develop, and implement measurable production processes within the specified time frame, and recommend improvements and cost reduction strategies.
Programmer/Fixture Design Engineer Trumpf SE + Co KGProgrammer/Fixture Design EngineerFarmington, CTUpdate existing and develop new fixtures, custom and modular, to fulfill machining requirements, address production challenges, improve efficiency and support new product introductions. This role combines mechanical engineering expertise with creative problem-solving to create fixtures that enhance productivity, precision, and safety across our product portfolio.
Principal Embedded Software Engineer BexorgPrincipal Embedded Software EngineerNew Haven, CT$180,000–$220,000BrainEx is a proprietary closed-loop physiological system that functions as an artificial cardiovascular, pulmonary, and renal system for an intact human brain — custom hardware and software regulating circulatory volume, cerebral blood flow, systolic pressure and pulsatility, pH, dissolved gases, temperature, metabolites, and drug dosing throughout each run. Design fluidic and mechanical hardware in CAD (SolidWorks, Onshape, or similar): manifolds, sensor housings, reservoirs, bubble traps, sealed enclosures, and rig-integration hardware, with attention to O-ring and gasket sealing, dead-volume minimization, tolerance stack-ups, and biocompatible, cleanable material selection.
NewPropulsor Engineer General Dynamics CorpPropulsor EngineerGroton, CTAs integral members of the Navy Propulsor Team, Engineers in this group provide high quality engineering, design, and manufacturing and construction support services to the Navy, new construction shipyards, and maintenance naval shipyards. Strong proficiency and experience with mechanical engineering principles including fastener design, geometric design and tolerancing, structural strength evaluations, analytic and numerical analysis methods, and rotating machinery is desired but not required.
COLUMBIA Propulsor Engineer General Dynamics CorpCOLUMBIA Propulsor EngineerGroton, CTThe group frequently works with other members of the Navy Propulsor Team including Electric Boats shock, hydrodynamics, shafting and bearing engineering, and ship signatures departments, Pennsylvania State University Applied Research Laboratory, and Navy laboratories. Duties include creating and checking engineering calculations, evaluation and adjudication of vendor manufacturing and installation issues, preparation of written engineering procedures in support of shipyard installation efforts, and design of GFE and shipyard lifting, handling and transportation hardware.
NewIntegrated Power Systems Software & Hardware Engineers General Dynamics CorpIntegrated Power Systems Software & Hardware EngineersGroton, CTThe United States Navys goals for more capable and more affordable submarines are shared and met by Electric Boat engineers as cutting-edge electric drive propulsion system components are developed, integrated, tested, and delivered with the utmost importance placed on first-time quality, in a timeframe that supports the needs of the United States Navy. Unique opportunities exist to advance technology centric to propulsion control, which presently consists of a highly diverse team of engineers and support staff that hold technical knowledge key to delivery of robust, high-performance control systems for the COLUMBIA Class.
NewSenior Proto Engineer ASMLSenior Proto EngineerWilton, ConnecticutEngineering Solution Development: Ability to develop engineering concepts and solutions, make sound technical tradeoffs, resolve issues, and realize designs that meet functionality, performance, cost, compliance, and schedule constraints within system/module specifications. Drives Results: The ability to translate strategic and technical goals into clear priorities, execution plans, and measurable outcomes, delivering committed results on time and with the right quality by taking ownership, managing trade-offs, removing obstacles, and sustaining momentum across stakeholders and dependencies. .
Quality Engineer GpacQuality EngineerWest Hartford, CT100000–115000GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. • Maintain quality documentation, metrics, and inspection records • Assist with new product launches, supplier changes, and process improvements.