352 Results for

SpaceX Jobs in the United States

Jobs

Redmond, WA30+ days ago

$122,500–$145,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. + Develop tools for software development and deployment, data analysis and visualization, and test execution across multiple environments, including virtualized hardware environments, real hardware-in-the-loop simulations, and on-orbit testing.

Starbase, TX30+ days ago

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The SpaceX Hospitality team serves all employees, customers, government partners, potential clients, and/or visitors with everything from snacks to daily meals to full-service events.

Hawthorne, CA30+ days ago

$95,000–$115,000 Per Year

Collaborate with engineers and technicians from all disciplines, including production, development test, launch, vehicle, GNC (guidance, navigation & control), flight and ground software, flight reliability, and more to develop hardware and transient sequences that meet high-level engine and vehicle objectives. The Propulsion Engineer role is responsible for owning the development, production, and operation of the engine ignition system, transients sequences, and associated combustion devices and engine systems hardware needed to successfully start and shut down the engine in all phases of flight.

Sunnyvale, CA30+ days ago

$130,000–$155,000 Per Year

Hawthorne, CA30+ days ago

$190,000–$245,000 Per Year

RESPONSIBILITIES: + Draft, negotiate, and review a broad range of commercial contracts, including launch services agreements, Starlink agreements related to telecommunications, backhaul, enterprise, retail, resale, aviation, and maritime business verticals. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Starbase, TX30+ days ago

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. The Hospitality Supervisor supports the direction and management of the organization's food/beverage operations and is directly responsible for the quality of service throughout one or more of our food service outlets/catering locations.

Hawthorne, CA30+ days ago

$95,000–$115,000 Per Year

One of the most ambitious missions that SpaceX has undertaken to date, Starlink is leveraging our experience in building rockets and spacecraft to deploy the world's most advanced broadband internet system and largest satellite constellation to provide fast, reliable internet to millions of users worldwide, connect humanity, and fund Mars colonization. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$32–$40 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area.

Bastrop, TX30+ days ago

As a Starlink Production Supervisor, you will manage large teams of technicians and assemblers while working closely with manufacturing and design engineers, ultimately driving the transition from initial prototyping to full-scale production. + Experience with PCB manufacturing processes including copper electroplating, chemical etching, water treatment, automated laser and mechanical drilling, PCB layup and lamination and/or plasma etching systems in a production setting.

Hawthorne, CA30+ days ago

$23–$27 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Bastrop, TX30+ days ago

Redmond, WA30+ days ago

$100,000–$120,000 Per Year

2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: + Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!

Sunnyvale, CA30+ days ago

$130,000–$155,000 Per Year

We are seeking a motivated, proactive, and intellectually curious engineer who will work alongside world-class cross-disciplinary teams (systems, firmware, architecture, design, validation, product engineering, ASIC implementation). ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Cape Canaveral, FL30+ days ago

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. PREFERRED SKILLS AND EXPERIENCE: + Experience setting up assemblies and parts in various types of processing and curing equipment such as an ovens and high temperature kilns to obtain desired set and cure.

Hawthorne, CA30+ days ago

$23–$27 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Hawthorne, CA30+ days ago

$125,000–$175,000 Per Year

The Lead Construction Engineer will oversee a team of construction engineers across multiple disciplines to design, build and activate infrastructure that will enable orbital launch capability for the largest rocket in the world. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Cape Canaveral, FL30+ days ago

The Automation & Controls Technician will be responsible for the installation and commissioning of new automation assets, panel builds, and drawing updates, as well as assisting maintenance with troubleshooting and repairs of existing assets. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Hawthorne, CA30+ days ago

$24–$31 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Woodinville, WA30+ days ago

$100,000–$115,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.

Redmond, WA30+ days ago

$105,000–$150,000 Per Year

RESPONSIBILITIES: + Own the change management and launch process for Starlink's Enterprise service evolution + Identify whether existing processes can scale further, or opportunities to simplify and automate + Own feature request intake and roadmap planning 6-12 months in the future for Starlink's Enterprise Services, working closely with technical sales architecture, product engineering, and business operations + Be the final gatekeeper for quality, ensuring teams do not compromise on customer experience for the sake of a deadline + Support the integration of new hardware and service products into Starlink's growing portfolio - this includes pricing, operations, sales enablement, and product portfolio management + Support the sales engagements of the broader team, engage with customers, and answer questions around commercial models and product capabilities + Work in partnership with our Licensing, Government Affairs, Operations, Finance, Legal, and Product Engineering teams + Consult with Sales Operations to improve Go-to-market processes for new product offerings + Represent Starlink at global conferences and events BASIC REQUIREMENTS: + Bachelor's degree in a STEM or Business discipline or 3+ years of professional working experience in lieu of a degree + 3+ years of professional experience in technical sales or product management + 3+ years of previous experience in a customer-facing role PREFERRED SKILLS AND EXPERIENCE: + Previous experience developing Enterprise/Business User Experiences- dashboards, APIs, payment processing methods, etc. This role is part of a high velocity team with extremely high expectations - the role requires a strong balance of business and technical acumen, as well as knowledge of the Starlink product and network, to support the Enterprise Sales team in achieving revenue targets.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

RESPONSIBILITIES: + Own continuity of supply for printed circuit boards (PCBs) on the Starlink program + Collaborate with design, R&D, commercial supply chain, hardware reliability, and production teams to manage suppliers and deliver world class products for our customers + Support procurement team to strategically source parts matched with supplier capabilities by reviewing and assessing supplier manufacturing processes and quality systems + Identify, audit, and onboard new suppliers + Develop and implement supplier technical requirements and quality flow downs to meet hardware manufacturing needs + Implement and monitor production part approval process (PPAP) with selected suppliers to enable rate production + Ensure qualification and reliability activities at suppliers are in line with requirements + Develop and approve process controls to control critical characteristics + Recommend technical product improvements to reduce risk and opportunities for defects + Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps to drive supplier improvement plans + Provide feedback to suppliers as appropriate on manufacturing methods, with a specific focus on eliminating costs, reducing cycle times, and increasing yields + Function as liaison between purchasing, engineering, manufacturing, and suppliers to resolve supplier quality issues and to provide technical support + Drive supplier root cause failure analysis and corrective actions associated with any quality gaps, escapes, or containments + Lead projects and present reports to internal teams, management, and/or suppliers + Act as internal owner of supplier's statistical process control (SPC), yield improvement activities, new tool/process qualification, and performance in terms of quality, efficiency, and cost BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + Experience with printed circuit boards (PCBs), engineering laminates, electrochemical processes, and/or microelectronics fabrication (school projects, clubs, or internship experience is applicable) PREFERRED SKILLS AND EXPERIENCE: + Advanced degree in engineering, business, or supply chain + Electronics manufacturing experience, preferably with PCBs for high-speed / RF applications + Working knowledge of supplier quality processes (PPAP, APQP, FAIR, RCCA failure analysis, lean methods, etc.) and quality systems (ISO 9000/TS/AS9100/NADCAP) + Knowledge of statistical techniques and methods, e.g., SPC, design of experiments, Six Sigma, etc. Enabled by a constellation of low Earth orbit satellites, Starlink provides fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.

Redmond, WA30+ days ago

$34–$40 Per Hour

Help others around them to exceed the expectations of their job BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 3+ years of CMM programming experience PREFERRED SKILLS AND EXPERIENCE: + 5+ years CMM experience, including programming on multi-sensing CMMs (vision, laser, touch probe, etc.) + Ability to read and understand GD&T and all drawing criteria, notes and tolerances + Ability to assist with designing/developing quality gauging to improve efficiency + Understands and adheres to ISO 9001 + Experience with set-up of CMM and Romer Arm (or other portable non-DCC arm) + Understands what tool is required to complete the job at hand ADDITIONAL REQUIREMENTS: + Willing to work shift hours: 3:00PM to 1:30AM PT + Ability to lift 25 lbs. + Create, maintain, verify, retain, sort and organize all programs created to ensure they are readily available and saved to the current revision (in close coordination with Quality Assurance supervision) + Work with cross functional teams to continuously improve the processes and specifications that govern precision inspection within the work center and beyond + Assist engineering with making part inspection plans + Identify engineering, design, GD&T issues and errors creating ambiguity in the manufacturing and inspection process.

Redmond, WA30+ days ago

$25.50–$31 Per Hour

RESPONSIBILITIES: + Lead satellite production team to achieve daily production targets involving mechanical integration and test execution according to work orders + Assist with the development of production processes, and identify continuous improvements to reliably achieve production targets + Build small electrical sub-assemblies + Mechanical/electrical assembly of satellite components, subassemblies, and integration of final vehicle assemblies + Mechanical/electrical assembly of PCB assemblies into product chassis + Build-up battery cell modules + Build solar modules and solar arrays + Wire harnessing + Solder and de-solder through-hole and SMT components + Support conformal coat, masking, epoxy application and coating + Run functional testing of built hardware, including setup, instrumentation, test execution, and teardown + Operate complex automated equipment, including troubleshooting and maintenance + Support the development of prototype test capabilities for spacecraft component development and life tests + Assist in the identification, installation and implementation of test equipment, instrumentation and data acquisition systems + Ensure lab equipment is maintained and calibrated, track calibration schedules + Responsible for some preventative maintenance activities on test equipment and data acquisition systems + Identify test equipment requirements for planned tests, maintain test consumables inventory, and develop test procedures and processes accordingly + Perform test setups as needed to support developments across several test regimes - thermal, shock, thermal vacuum, vibration + Manage schedule priorities and independently executing work to meet company deliverables BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months as a SpaceX Technician or 1+ years of experience in an outside aerospace production environment PREFERRED SKILLS AND EXPERIENCE: + 2+ years of experience in electro-mechanical assembly, integration or mechanical assembly experience + Associate degree + Airframe and Powerplant (A&P) license + Demonstrated ability to read, interpret and work from drawings, controlled documentation and processes such as: layout drawings, mechanical drawings, assembly procedures/work instructions; schematics, engineering drawings, and parts list + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Experience with electrical wiring + IPC and/or J-STD certification + Electro-mechanical assembly and prototype development experience + Experience setting up and running tests and experiments + Soldering experience ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$85,000–$100,000 Per Year

In this high-impact role, you'll cultivate strategic partnerships with key ground infrastructure suppliers-including datacenters, fiber companies/ISPs, internet exchanges (IXs), and other in-region partners-to identify, deliver, and operate Starlink's ground infrastructure. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

Your placement on these teams will be determined throughout the interviewing process after factoring in technical fit, expertise, team need, and your personal preference RESPONSIBILITIES: + Own hardware from conceptual design through high volume production and on-orbit operation for the Starlink constellation + Develop design criteria, collaborate on requirements, and drive system-level optimization + Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction + Drive holistic DFM to create elegant designs with a focus on piece part and process count reductions, error proofing at every step of fabrication and integration, and consistent performance and production metrics + Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line + Perform environmental and performance testing on hardware to validate analysis and demonstrate compliance to design criteria + Own product delivery timeline through conception, design, assembly, and launch + Demonstrate extreme ownership of product outcomes at every stage of development and production BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + Experience with CAD and FEA software packages + 1+ years of professional experience (including internships) with mechanical/electromechanical design, analysis, testing, and/or manufacturing PREFERRED SKILLS AND EXPERIENCE: + Master's degree in engineering or a related technical discipline + 3+ years of professional experience in mechanical design and analysis + 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead + Proficient in 3D CAD (NX preferred) + Solid understanding and application of GD&T + Demonstrated understanding of structural analysis and failure modes of complex mechanical systems + Prior ownership of a complex component or assembly from initial design through high-volume production ramp + Self-motivated with strong organizational, written, and oral communication skills Some preferred skills and experience depend on the specific team within Starlink mechanical engineering, and may include: + Knowledge of and experience in selecting materials, manufacturing methods, and surface treatments for mechanical components + Proficiency in one or more programming languages + Experience working with PCB designers and exposure to PCB layout and PCBA mechanical design + Experience with design of experiments, statistical process control, and process qualification + Specific expertise applicable to any of the above sub-teams ADDITIONAL REQUIREMENTS: Ability to work long hours and weekends as necessary to support mission critical milestones COMPENSATION AND BENEFITS:????????????? Design work ranges from flight array to test and production machine design; as well as thermal/electrical/material interfaces with other groups + Battery Packs Team: mechanical design, thermal, and electrical analysis on the in-house battery packs with thousands of individual battery cells, emphasizing mass-efficient and runaway-resistant architectures.

Woodinville, WA30+ days ago

$100,000–$115,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

RESPONSIBILITIES: + Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems + Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent + Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems + Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases + Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers + Define product technical requirements, and ensure supplier compliance with these requirements + Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production + Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans + Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology + Identify and drive product & process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time + Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers + Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage + Collaborate with teams, lead projects, and continuously drive improvement in the supply base BASIC QUALIFICATIONS: + Bachelor's degree in an engineering or STEM discipline + 2+ years of experience in one of the following: manufacturing, supply chain engineering, supplier development/quality, or design engineering (internship experience is applicable) PREFERRED SKILLS AND EXPERIENCE: + Master's degree in engineering, business, or supply chain + Manufacturing experience in an area such as CNC, Injection Molding, Castings, etc. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$130,000–$180,000 Per Year

RESPONSIBILITIES: + Champion new thermal-optical, inorganic, and organic coating technologies for Starlink satellites from concept through qualification, implementation, and production stabilization; collaborate with cross-functional teams to define requirements, evaluate optical performance, and deploy optimized solutions. + Lead rigorous space environment testing and reliability validation, including thermal vacuum cycling, atomic oxygen, radiation, UV exposure, and other orbital simulations; iterate designs to ensure long-term durability in harsh space conditions.

Redmond, WA30+ days ago

$125,000–$145,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As an engineer focused on Starlink's software and network infrastructure, you will design, operate and scale the infrastructure we use to run the world's largest satellite constellation and manage a network that handles millions of daily users worldwide.

Redmond, WA30+ days ago

$125,000–$145,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. GNC ENGINEER, SATELLITE POWER SYSTEMS At SpaceX we're leveraging our experience in building rockets and spacecraft to deploy Starlink, the world's most advanced broadband internet system.

Redmond, WA30+ days ago

$46.50–$57 Per Hour

RESPONSIBILITIES: + Use of NX or MasterCam CAD/CAM/CAE program to program CNC parts + Vericut NC files as well as maintain revision control on programs and setup sheets + Cut tools and adjust speed and feed parameters for maximum tool life + Make or offer suggestions on drawing changes to improve manufacturability + Keep products moving and alerting management when production is inhibited + Provide consistent ideas for process improvements + Mentor motivated machinists with programming knowledge + Machine parts occasionally to assist the shop floor when machining is backlogged BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of CNC programming experience using NX or MasterCam software PREFERRED SKILLS AND EXPERIENCE: + 10+ years of CNC programming experience using NX or MasterCam software + Experience with programming and operating multi axis mill and lathe CNC machines ADDITIONAL REQUIREMENTS: + Must be available for 10-hour shifts. unassisted + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: CNC Programmer/Level 4: $46.50 - $57.00/hour CNC Programmer/Level 5: $52.00 - $64.00/hour

Bastrop, WA30+ days ago

RESPONSIBILITIES: + Develop comprehensive execution plan to implement market requirements for initial market access and rapid growth of operations + Track and report on key performance indicators (KPIs) such as the timeliness of activation upon full authorization in a market, product accessibility, and Starlink's operational health in live markets + Guide planning and resource management for specific verticals within Starlink, including development of business models + Identify initiatives for improvement of Starlink's business outlook, including developing, tracking, and executing business initiatives with Starlink's leadership + Identify and lead implementation of process and system enhancements to improve handoffs and execution across various teams, evolve the customer experience, or scale the business while balancing resources + Collaborate and partner with cross functional teams in order to build a strong networking across these departments and with external resources to ensure compliance + Support and educate internal stakeholders on market requirements and timeframes, working collaboratively to achieve company objectives BASIC QUALIFICATIONS: + Bachelor's degree in STEM, business, economics, or finance + 4+ years of experience in business operations, project management, or strategic planning + 1+ year experience based abroad or working with operations outside of the United States + 1+ year of experience with analytical skills (e.g. Tableau, Power BI, Looker) + Experience using various programming languages (e.g Python, Javascript, R, SQL, HTML, XML, CSS, Ruby) + Strong written and verbal communication skills, particularly with senior business leaders ADDTIONAL REQUIREMENTS: + Willingness to travel up to 50% + Must be willing to work extended hours and/or weekends + This is not a remote position and would require being onsite in either Bastrop, TX or Redmond, WA ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$135,000–$205,000 Per Year

Our Power Electronics team designs and develops the power conversion and control systems at the heart of the Starlink satellites and portions of the ground systems - enabling the high-speed, low-latency broadband internet service provided by Starlink across the globe. As a member of the team, your designs will run the gamut from low voltage to kV range, and powers from 1W to many kW (other applications include solar/MPPT, battery, motors/actuators, ion propulsion, laser optical links, and other vehicle systems).

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

Redmond, WA30+ days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Design, simulate and model RF/analog/mixed-signal circuits and systems + Derive specifications for the RFIC subsystems and circuits + Develop Analog/Mixed-Signal/RF/microwave circuits in SiGe or CMOS processes + Work with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate and characterize prototypes of the design + Characterize and analyze full radio performance + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the RFIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 2+ years of RF integrated circuit experience PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in RF/Analog/Mixed-signal integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum + Circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Knowledge of RF transceiver architectures + RF/microwave design in the Ku-band, K-band and Ka-band frequency range + Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance in microwave frequencies ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

Redmond, WA30+ days ago

$135,000–$205,000 Per Year

Drive system trades, requirements capture, component selection, analysis, schematic capture, PCB layout, prototyping, hardware bring-up, debugging, documentation, manufacturing, test, and on-orbit performance of complex electrical designs + Get hands-on and support hardware through production, satellite integration, and flight + Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design, etc.) to deliver tightly integrated, high-performance hardware + Challenge assumptions, question requirements, learn from your mistakes, and approach problems with an open mind BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or physics + 5+ years of industry experience designing circuits, electronic products, or hardware PREFERRED SKILLS AND EXPERIENCE: + Master's degree in electrical engineering, computer engineering, or similar engineering degree + 2+ years of professional experience rapidly designing and delivering highly reliable products + 2+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life-cycle development of new hardware products and not small incremental updates to legacy hardware + 2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components + 2+ years of professional experience testing, troubleshooting, and debugging electronics + Strong understanding of computers and programming languages (Python, C/C++) + Demonstrated ability to work in a highly cross-functional role + 2+ years working on aerospace systems ADDITIONAL REQUIREMENTS: + Ability to work extended hours or weekends as needed for mission critical deadlines + Some travel may occasionally be required COMPENSATION AND BENEFITS: Pay range: Electrical Design Engineer/Senior: $135,000.00 - $205,000.00/per year Base salary is just one part of your total rewards package at SpaceX. Sub-teams include: + Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

RESPONSIBILITIES: + Manage integration build flow and test operations + Evaluate proposed designs for manufacturability and integration + Interface with both engineers and technicians to optimize manufacturing and automation + Regularly challenge each process, part, and operation while working closely with design/development engineers to create the most manufacturable and reliable satellite hardware possible + Maintain a sense of holistic ownership over the production line including process consistency, quality, tooling, capital equipment, ergonomics, and safety + Enable day-to-day execution of the vehicle integration and test flow + Evaluate non-conformances to determine root cause and create actionable items and system improvements BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + 1+ years of hands-on fabrication, assembly, testing, and/or project management experience via internships, labs, clubs, extracurricular activities, or professional industry experience PREFERRED SKILLS AND EXPERIENCE: + Experience with integration and testing of propulsion, thermal, electrical, and/or structural systems + Understanding of test methods/setups and data acquisition systems + Experience working with composites and integration of avionics systems + Documentation and configuration management experience + Experience writing test plans, and procedures and providing go/no-go judgment and rationale + Experience in a production environment + Demonstrated engineering intuition, critical thinking, and comfort with ambiguity + Experience with 3D CAD software (e.g. INTEGRATION & TEST ENGINEER (STARLINK PROPULSION) As an Integration & Test engineer for Starlink propulsion you will have the opportunity to develop, implement, and optimize production processes for key sub-assemblies and components of the propulsion system comprised of the Argon Hall Thruster, propellant feed systems, and satellite primary structure.

Redmond, WA30+ days ago

$105,000–$120,000 Per Year

You will build reliable, efficient systems by leading RESPONSIBILITIES: + Apply optics and photonics knowledge to optical system development, including design, analysis, and validation + Represent the optical system in program-level, cross-disciplinary trades and issue resolution + Define requirements for high-performant optical systems in challenging environmental conditions + Lead optical architecture definition through internal trade studies, concept of operations definition, and risk reduction testing + Participate in verification testing, including environmental qualification, performance characterization, reliability testing, and fault injection testing + Define and lead field testing of optical experiments and laser communication systems + Review test data and lead anomaly investigation and resolution + Maintain link budgets, design specifications, and system capabilities data + Interface with manufacturing and supply chain teams to ensure final designs can be manufactured in accordance with overall project goals + Collaborate with software and automation teams to develop tools and protocols for automated optical testing + Represent laser communications systems for reliability and risk discussions with internal reliability teams, management, customers, and vendors BASIC QUALIFICATIONS: + Bachelor's degree in physics, computer science, electrical engineering, or other engineering/STEM discipline + 2+ years of hands-on laboratory or work experience in optics, photonics, laser technology, or precision mechanical design or testing (university lab, student project, or internship experience qualifies) + 1+ years of experience in a computer programming language (e.g. SPACE LASERS ENGINEER, SATELLITES (STARLINK) The Starlink Space Lasers team develops, produces, and deploys the most cutting-edge satellite free-space optical communication systems in the world.

Redmond, WA30+ days ago

$135,000–$195,000 Per Year

Redmond, WA30+ days ago

$26–$33 Per Hour

Ensure notification and corrective actions are put in place when any unsafe condition is presented or found throughout the site + Assist the EHS engineers in accident/mishap investigations when necessary Environmental + Responsible for environmental compliance with all applicable regulations including but not limited to OSHA/WA DOSH, RCRA/WA Department of Ecology, DOT and King County FD + Perform tasks related to resource conservation and recovery act (RCRA) regulatory hazardous waste handling, storage and disposal requirements + Monitor and manage levels of hazardous waste at each department's satellite accumulation area + Ensure all waste is properly labeled + Ensure all waste is properly stored, according to its classification + Accurately record and maintain 90-day hazardous waste drum logs, hazardous waste sign in sheets, VOC solvent usage logs + Accurately perform all required hazardous waste and hazardous material storage area inspections + Assist in waste shipments with the waste disposal contractor + Perform weekly storm water inspections per the SWPPP + Perform tasks related to spill response/prevention + Implement the spill prevention countermeasures and control plan (SPCC) throughout the facility + Perform environmental compliance and due diligence audits BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of experience implementing and overseeing aspects related to an environmental, health and safety program PREFERRED SKILLS AND EXPERIENCE: + Experience in managing hazardous waste storage and satellite accumulation areas + Experience in performing boots on the ground safety oversight + Experience implementing/developing health and safety plans and policies + Experience with emergency response crews in incidents involving hazardous and non-hazardous material releases to air, soil and water + Demonstrated strong propensity for hands-on work and attention to detail in either academic or career pursuits + Ability to multi-task, to manage shifting priorities and to follow through on projects with minimal supervision + Previous experience in a construction/industrial environment + Strong organizational and communication skills are essential + Ability to work in high-volume, fast paced environment ADDITIONAL REQUIREMENTS: + This is not a remote or hybrid position and will require relocation if not already local to the Redmond, WA area + Position occasionally requires the ability to work overtime and weekends when needed + Ability to lift up to 30 lbs unassisted COMPENSATION AND BENEFITS: Pay range: EHS Technician/Level 1: $26.00 - $33.00/hour EHS Technician/Level 2: $32.00 - $39.00/hour EHS Technician/Level 3: $36.00 - $45.00/hour RESPONSIBILITIES: Health and Safety + Perform boots on the ground safety oversight by Identifying and correcting work place hazards and unsafe conditions + Monitor employee exposure to job and chemical hazards as regulated by OSHA permissible exposure limits + Assist in the implementation and compliance of site-specific safety policies + Assist in the creation of job hazard analysis and personal protective equipment (PPE) assessments + Perform department specific safety surveys using inspection forms to ensure employees are utilizing safe work practices such as utilizing proper PPE, minimizing trip hazards, wearing fall protection etc.

Redmond, WA30+ days ago

$105,000–$120,000 Per Year

These teams work with a wide range of technical disciplines including high-speed digital communication, network system integration, power systems integration, RF systems, avionics, network computers, power electronics, failure analysis, on-orbit reliability, and testing automation. As an Electrical Test and Reliability Engineer on Starlink, you'll sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our satellite hardware can withstand the harsh environment of space and maintain communication with millions of users on a global scale.

Redmond, WA30+ days ago

$100,000–$115,000 Per Year

Machinery and processes: dispenser, pick and place, fastener installation, automated bonding, thermo-compression, soldering, ultrasonic welding, temperature & position control, injection molders, die casters, etc. and design for manufacturing + Applied Statistical Process Control and other data tools (descriptive, inferential, regression, correlation) to improve manufacturing processes + Safely testing and commissioning integrated systems Software: + PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES: + Develop highly reliable, real-time software that determines which beams (user, laser, gateway, etc) should be formed in order to provide the best possible user experience for our low-latency, high-bandwidth satellite-based global network. + Develop tools for software development and deployment, data analysis and visualization, and test execution across multiple environments, including virtualized hardware environments, real hardware-in-the-loop simulations, and on-orbit testing.

Woodinville, WA30+ days ago

$82,000–$100,000 Per Year

You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. Learn more about the ITAR here (https://www.pmddtc.state.gov/?id=ddtc\_kb\_article\_page&sys\_id=24d528fddbfc930044f9ff621f961987) .

Bastrop, WA30+ days ago

Redmond, WA30+ days ago

$22–$25 Per Hour

unassisted + Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position + Must be willing to work in an open-aired environment, lacking temperature controls COMPENSATION AND BENEFITS: Pay range: Inventory Specialist/Level 1: $22.00 - $25.00/hour Inventory Specialist/Level 2: $24.50 - $29.00/hour Inventory Specialist/Level 3: $27.00 - $34.50/hour This role is responsible for completing put-aways for inbound material, picking products for production, filling the lineside build locations with materials, putting finished goods into inventory, picking finished goods for customer orders, and ensuring inventory accuracy.

Redmond, WA30+ days ago

$168,000–$230,000 Per Year

Ideally, you have notable skills in one or more of the following: + Software engineering + Applied cryptography + Network security + Operating system security + Secure/Authenticated boot + Incident response and adversary detection + Vulnerability research Being flexible, communicating clearly, and establishing and maintaining productive working relationships with other engineering teams are paramount to success. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to job opportunities. Plus, receive relevant job recommendations in your inbox.

SpaceX Jobs in the United States

Jobs

Software Engineer (Direct To Cell)SpaceX

MixologistSpaceX

Propulsion Engineer (Raptor Development Operations)SpaceX

Software Engineer (Direct To Cell)SpaceX

Commercial Counsel, Launch and StarlinkSpaceX

Supervisor, HospitalitySpaceX

Operations Engineer (Starlink Growth)SpaceX

CMM Programmer (Starlink) - 2nd ShiftSpaceX

Production Supervisor (Starlink PCB)SpaceX

Avionics Test Technician (Space Simulation Test Lab)SpaceX

Chemical Production Supervisor (Starlink PCB)SpaceX

Chemical Process Supervisor (Starlink PCB)SpaceX

Electrical Design Engineer, Satellites (Starlink)SpaceX

ASIC/SOC DFT Engineer (Silicon Engineering)SpaceX

Thermal Development Technician, Heat Shield (Starship) - Multiple ShiftsSpaceX

Orbital Tube Welder (Fluid Systems)SpaceX

Lead Construction EngineerSpaceX

Automation & Controls Technician, Heat Shield Production (Starship) - Night ShiftSpaceX

Quality Inspector (Falcon)SpaceX

Hardware Reliability Engineer (Starlink Aviation)SpaceX

Manufacturing Engineer - Supplier Development, Optics & Optomechanical Systems (Starlink)SpaceX

Product Sales Manager (Product Launch, Roadmap Planning)SpaceX

Supplier Development Engineer, PCB (Starlink)SpaceX

CMM Programmer (Starlink) - 2nd ShiftSpaceX

Lead Technician - Starlink Satellite Mech and Electronic Production (Starlink) - 2nd shiftSpaceX

International Infrastructure Operations Specialist (Starlink)SpaceX

Mechanical Engineer, Satellites (Starlink)SpaceX

Operations Engineer (Starlink Aviation)SpaceX

Manufacturing Engineer, Supplier Development (Starlink)SpaceX

Sr. Materials Engineer, Satellites (Starlink)SpaceX

Kubernetes Platform Infrastructure Engineer (Starlink)SpaceX

GNC Engineer, Satellite Power Systems (Starlink)SpaceX

CNC Programmer (Starlink) - Level 4/5SpaceX

Global Operations Manager, EuropeSpaceX

Sr. Power Electronics Engineer, Satellites (Starlink)SpaceX

Supply Chain Engineer, PCB (Starlink)SpaceX

RFIC Design Engineer (RFIC Engineering)SpaceX

Supplier Industrialization Engineer, PCB (Starlink)SpaceX

Sr. Hardware Development Electrical Engineer - (Starlink)SpaceX

Integration & Test Engineer (Starlink Propulsion)SpaceX

Space Lasers Engineer, Satellites (Starlink)SpaceX

Sr. Space Lasers Engineer, Satellites (Starlink)SpaceX

Environmental Health & Safety TechnicianSpaceX

Electrical Test and Reliability Engineer, Satellites (Starlink)SpaceX

Automation & Controls Engineer (Starlink)SpaceX

Sr. Software Engineer, Beam Planning (Starlink)SpaceX

Account Specialist, Starlink Enterprise Account Management (Aviation)SpaceX

Global Operations Manager, Latin AmericaSpaceX

Inventory Specialist (Starlink)SpaceX

Sr. Product Security Engineer (Starlink)SpaceX

Resume Resources