Construction Engineering Inspector GFT.Construction Engineering InspectorRaleigh, North Carolina$50,000–$80,000 / yearFull timeAbility to work safely in an outside environment with exposure to hazards on construction sites including heights, highway traffic, and traversing rough terrain in evaluating highway construction. What you’ll be challenged to do: As an engineering inspector, you will experience exceptional training and career development opportunities, allowing you to understand dynamics unique to being in the field as part of the construction management function.
CEI- Construction Engineering Inspector (Multiple Levels: Trainee to Senior Tech) SAM, LLCCEI- Construction Engineering Inspector (Multiple Levels: Trainee to Senior Tech)Raleigh, North Carolina$23.29–$32.59 / hourFull timeSAM streamlines project delivery through a single, coordinated team, offering in-house capabilities across land surveying, aerial mapping, subsurface utility engineering (SUE), utility coordination (UC), GIS, BIM, and construction engineering inspection (CEI). Your Impact at SAM: We are actively seeking highly motivated Construction Engineering Inspectors across all experience levels (Trainee/Tech I through Senior Tech IV) to support upcoming and ongoing on-call contracts, primarily with the North Carolina Department of Transportation (NCDOT).
Facilities Engineering & Operations Manager - Water & Wastewater Treatment WolfSpeed Inc.Facilities Engineering & Operations Manager - Water & Wastewater TreatmentDurham, NCHere's the Gist: We are seeking a Facilities Engineering & Operations Manager- Water & Wastewater Treatment to lead a multi-site team of engineers, supervisors, and technicians responsible for the reliability, system hardening, and cost-efficient operation of water, wastewater, and reclaim systems across U.S. facilities. This role is focused on operational excellence, asset lifecycle optimization, and sustained OPEX reduction, with primary emphasis on strengthening and optimizing existing infrastructure rather than greenfield expansion.
Product Development Engineering Tech 2 LancesoftProduct Development Engineering Tech 2Durham, NC$24Under the direction of the Senior Mold Engineer, the Injection Molding and 3D Printing Lab Technician will operate injection molding machines, adjust process settings to improve part quality, handle and dry molding resins, hang and remove molds, measure parts, perform preventative maintenance on machines, monitor and troubleshoot 3D print builds, and provide quality “finished”printed and molded components to business customers in order to support the 3DP&P groups in their delivery of quality prototype parts to business customers in a timely manner. GENERAL FUNCTION: The Injection Molding and 3D Printing Lab Technician is an essential part of Client’s Digital Engineering –3D Printing & Prototyping (3DP&P) group and will have the opportunity to contribute to the advancement of Client’s next-generation medical products and enhance the current product portfolio.
Product Development Engineering Tech 1 LancesoftProduct Development Engineering Tech 1Durham, NC$24Under the direction of the Senior Mold Engineer, the Injection Molding and 3D Printing Lab Technician will operate injection molding machines, adjust process settings to improve part quality, handle and dry molding resins, hang and remove molds, measure parts, perform preventative maintenance on machines, monitor and troubleshoot 3D print builds, and provide quality “finished”printed and molded components to business customers in order to support the 3DP&P groups in their delivery of quality prototype parts to business customers in a timely manner. · Perform post processing of 3D printed parts using established processes such as ultrasonic cleaning, sand blasting, pressure washing, hand sanding, polishing, and painting while maintaining dimensional accuracy and visual aesthetics.
Tech 1, Product Development Engineering Apidel TechnologiesTech 1, Product Development EngineeringDurham, NCContractorUnder the direction of the Senior Mold Engineer, the Injection Molding and 3D Printing Lab Technician will operate injection molding machines, adjust process settings to improve part quality, handle and dry molding resins, hang and remove molds, measure parts, perform preventative maintenance on machines, monitor and troubleshoot 3D print builds, and provide quality finished printed and molded components to business customers in order to support the 3DP&P groups in their delivery of quality prototype parts to business customers in a timely manner. Perform post\'processing of 3D printed parts using established processes such as ultrasonic cleaning, sand blasting, pressure washing, hand sanding, polishing, and painting while maintaining dimensional accuracy and visual aesthetics.
Tech 2, Product Development Engineering Apidel TechnologiesTech 2, Product Development EngineeringDurham, NCContractorUnder the direction of the Senior Mold Engineer, the Injection Molding and 3D Printing Lab Technician will operate injection molding machines, adjust process settings to improve part quality, handle and dry molding resins, hang and remove molds, measure parts, perform preventative maintenance on machines, monitor and troubleshoot 3D print builds, and provide quality finished printed and molded components to business customers in order to support the 3DP&P groups in their delivery of quality prototype parts to business customers in a timely manner. Perform post\'processing of 3D printed parts using established processes such as ultrasonic cleaning, sand blasting, pressure washing, hand sanding, polishing, and painting while maintaining dimensional accuracy and visual aesthetics.
Engineering Manager SolvenowEngineering ManagerRaleigh, North CarolinaAs the Engineering Manager for Water & Wastewater, you will manage execution of the engineering component of multiple traditional, design-build, design-bid-build, and collaborative delivery projects including advanced treatment facilities, underground conveyance, and carbon neutral solutions. Lead larger production teams, coordinate multiple discipline activities, and serve as the responsible charge for a project.
Facilities Engineering & Operations Manager – Water & Wastewater Treatment WolfspeedFacilities Engineering & Operations Manager – Water & Wastewater TreatmentDurham, North CarolinaHere’s the Gist : We are seeking a Facilities Engineering & Operations Manager – Water & Wastewater Treatment to lead a multi-site team of engineers, supervisors, and technicians responsible for the reliability, system hardening, and cost-efficient operation of water, wastewater, and reclaim systems across U.S. facilities. This role is focused on operational excellence, asset lifecycle optimization, and sustained OPEX reduction, with primary emphasis on strengthening and optimizing existing infrastructure rather than greenfield expansion.
Engineering Specialist I - Durham Traffic - 60019438 State of North CarolinaEngineering Specialist I - Durham Traffic - 60019438Durham, North CarolinaThe person in this position will conduct traffic engineering investigations such as speed zone studies, intersection surveys for traffic signals, develop plans for signing and/or pavement marking needs, traffic analysis using various software programs, prepare cost estimates for traffic signal installation, prepare pavement marking and sign installation plans. Associate’s degree in an applicable area of engineering technology from an appropriately accredited institution and six (6) years of progressive technician experience; or High School or General Educational Development (GED) diploma and eight (8) years of progressive technician experience; or an equivalent combination of education and experience.
Manager, Engineering AxonManager, EngineeringRaleigh, North CarolinaDesign of machined and fabricated parts (including manufacturing methods) which includes shafts, bearings & housings, valves, drive components, mounting plates & precision spacers, structural frame weldments, sheet metal bins, channels, covers, ducts etc. Works closely with the Sales Department, application of mechanical engineering knowledge of machinery principles and materials, manufacturing methods and processes to insure designs are functional, practical and economical, and satisfy customer operating requirements.
NewManager, Engineering Axon LLCManager, EngineeringRaleigh, NCDesign of machined and fabricated parts (including manufacturing methods) which includes shafts, bearings & housings, valves, drive components, mounting plates & precision spacers, structural frame weldments, sheet metal bins, channels, covers, ducts etc. Works closely with the Sales Department, application of mechanical engineering knowledge of machinery principles and materials, manufacturing methods and processes to insure designs are functional, practical and economical, and satisfy customer operating requirements.
Training And Product Service Engineering Manager Eaton CorporationTraining And Product Service Engineering ManagerRaleigh, NC$130,000–$190,000 / yearManage team of Product Service Engineers that provide design for serviceability input to the Critical Power Solutions Product Line from introduction to the market through end of service life using the PROLauch (stage gate management) process. What you'll do: The Training & Product Service Engineering Manager is responsible for managing a team of Product Service Engineers (PSE) and Service Product Trainers who help to execute the strategy of the Critical Power Solutions (CPS) Service Division.
NewTest Technician - 2Nd Shift - CPO Eaton CorporationTest Technician - 2Nd Shift - CPORaleigh, NCAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Survey CAD Technician 2 Bateman Civil SurveySurvey CAD Technician 2Apex, North CarolinaBateman Civil Survey is a leading land surveying and civil engineering firm headquartered in the heart of Apex, North Carolina. Unsolicited resumes sent via mail, fax, email, or directly to BCSC employees will be considered property of BCSC and no placement fees will be paid.
Semiconductor Process Engineer/Technician – 2nd Shift MicrossSemiconductor Process Engineer/Technician – 2nd ShiftDurham, North CarolinaThis engineer will support documentation, implementation, and improving robust mechanical assembly methodology in the areas of IR scene projector arrays, detector modules, RF or Digital semiconductor electrical component and IC chips assembly and packaging in a broad range of configurations. Comply with all quality and ITAR policies, practices and procedures; Participate in proactive team efforts to achieve departmental and company goals; Communicate effectively with all levels of employees; Protect confidential information by not communicating, disclosing to, or using for benefit of 3rd parties.
Process Engineer/Technician MicrossProcess Engineer/TechnicianDurham, North CarolinaCandidates should bring deep knowledge of semiconductor materials, a steady hand for precision work, and strong problem-solving abilities to optimize process flows and troubleshoot equipment or sample issues. This role demands proficiency operating in cleanroom environments using wet benches and dry boxes, with strict adherence to safety and contamination-control protocols.
Commissioning Technician/Engineer RMF Engineering, IncCommissioning Technician/EngineerRaleigh, NCThe ideal candidate is technically curious, organized, field oriented, and comfortable working directly with contractors, facility staff, and engineers in active construction and operating environments. RMF Engineering, Inc. a national engineering firm, is currently seeking a Commissioning Technician/Engineer to oversee, investigate, challenge and test mechanical, electrical and plumbing (MEP) projects.
Entry Level Construction Technician - Will Train! NOVA Engineering and Environmental, LLCEntry Level Construction Technician - Will Train!Raleigh, NCPart time1+ years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials is preferred, but willing to hire entry-level with strong work ethic and willing to learn. In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: Use of take-home Company Vehicle and gas card for daily travel to work sites and gas card .
Urgent job opening for Electrical Technician Integrated Resources, IncUrgent job opening for Electrical TechnicianDurham, North CarolinaFull timeIntegrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. Duties: Schematics: A primary task of the role is to generate and update electrical schematics of machines.