Aviation Safety Inspector, POI - FLIGHT (PRINCIPAL OPERATIONS INSPECTOR - FLIGHT PROGRAM) U.S. Department of TransportationAviation Safety Inspector, POI - FLIGHT (PRINCIPAL OPERATIONS INSPECTOR - FLIGHT PROGRAM)DC$90,925–$118,204 / yearMedical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. In addition, when the predominant work involves General Aviation Operations, applicants for Aviation Safety Inspector (Operations) positions must meet all of the following requirements: Valid, unexpired Flight Instructor Certificate with single and multi-engine airplane and instrument airplane ratings.
NewAviation Safety Inspector (GA Operations) (Principal Operations Inspector Flight Program) U.S. Department of TransportationAviation Safety Inspector (GA Operations) (Principal Operations Inspector Flight Program)Washington, DC$107,592–$139,871 / yearThe minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and. Significant investments are advancing the research and development of autonomous vehicles, environmentally friendly electric aircraft, high-speed and long-endurance solar-powered aircraft, and new types of space vehicles.
Aviation Safety Inspector (Cabin Safety) (Cabin Safety Inspector (CSI)) U.S. Department of TransportationAviation Safety Inspector (Cabin Safety) (Cabin Safety Inspector (CSI))Washington, DC$115,711–$150,426 / yearMedical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. Significant investments are advancing the research and development of autonomous vehicles, environmentally friendly electric aircraft, high-speed and long-endurance solar-powered aircraft, and new types of space vehicles.
Aircraft Quality Control Inspector - Customs and Border Protection AmentumAircraft Quality Control Inspector - Customs and Border ProtectionEl Paso, TexasThe inspector monitors’ the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation.
Aircraft Quality Control Inspector - Customs and Border Protection Amentum Services IncAircraft Quality Control Inspector - Customs and Border ProtectionLaredo, TXThe inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation.
Aircraft Quality Assurance Inspector Amentum Services IncAircraft Quality Assurance InspectorHomestead, FLThe inspector monitors the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The CBP Aircraft Quality Assurance Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation.
Borescope Inspector GE Aerospace.Borescope InspectorPittsburgh, PASupport engine test execution and resolve any testing issues by driving root cause corrective action and problem-solving efforts following the appropriate problem-solving tool, Repair Station Manuals, and GE Policies & Procedures. Partner with cross-functional teams including EHS, quality, engineering, planning, and materials to support operational initiatives, identify root cause corrective action, and support constant improvement site-wide.
Aircraft Quality Assurance Inspector AmentumAircraft Quality Assurance InspectorHomestead, FloridaThe inspector monitors the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The CBP Aircraft Quality Assurance Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation.
Quality Assurance Inspector Pilatus Aircraft LtdQuality Assurance Inspector$35–$48 / hourMinimum 5 years of aircraft maintenance experience, including experience in a quality or inspection role within a Part 145 repair station preferred. Responsibility for oversight of maintenance quality, regulatory compliance, inspections, and quality system activities in accordance with FAA regulations and approved maintenance procedures.
Quality Inspector – Cable & Wire Harnesses - Level 2 SQA ServicesQuality Inspector – Cable & Wire Harnesses - Level 2Usa, TexasTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries.
Quality Inspector II RTXQuality Inspector IIKansasIn this pivotal role, you'll be responsible for ensuring quality product is received into the repair station by performing conformity inspections and coordinating non-conforming product dispositions within the compliance of AS9100 and FAA CFR 145 Repair Station requirements. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Quality Inspector III RTXQuality Inspector IIIKansasIn this pivotal role, you'll be responsible for ensuring quality product is received into the repair station by performing conformity inspections and coordinating non-conforming product dispositions within the compliance of AS9100 and FAA CFR 145 Repair Station requirements. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
QUALITY CONTROL INSPECTOR Airborne Global Solutions IncQUALITY CONTROL INSPECTORTAMPA, FLA QC Inspector should have a general knowledge of the use of precision measuring devices and testing equipment to evaluate parts, instruments, and manufacturing processes using schematics, drawings, aircraft maintenance manuals, and/or but not limited to Airworthiness Directives and Service Bulletins. Inspectors will be required to perform In-Process Audits, In-Process Inspections, and Final Inspections of mechanical, electro-mechanical, pneumatic, hydraulic parts, components, and subassemblies, including aircraft skin and structures.
Quality Generator Inspector III RTXQuality Generator Inspector IIIKansasIn this pivotal role, you'll be responsible for ensuring quality product is received into the repair station by performing conformity inspections and coordinating non-conforming product dispositions within the compliance of AS9100 and FAA CFR 145 Repair Station requirements. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Aircraft Quality Inspector Bee Talent SolutionsAircraft Quality InspectorSavannah, GA$70–$72 / hourProficient in blueprint/drawing reading and use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications, and other manufacturing and/or inspection-related documentation. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance with FAA/ODA requirements.
NDT Inspector Linear MotionNDT InspectorSaginaw, MichiganSupervisory Responsibilities: None Language, Math, and Reasoning Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, drawings, procedure manuals, set-up sheets, blueprints, government regulations, and technical procedures. Labor Grade IV.V NDT (magnetic particle and eddy current inspections) inspectors will reach a Labor Grade VI.IV when they achieve their FAA repairperson’s license.
Senior Superintendent (San Antonio, TX) - Austin Commercial Austin IndustrialSenior Superintendent (San Antonio, TX) - Austin CommercialSan Antonio, TXInspects all field construction work in progress, including work that is subcontracted, and ensures that uniformly high-quality workmanship is maintained during each construction segment; supervises or appoints staff as appropriate to supervise all activities performed on the jobsite regardless of the day or time of the performance of the work, pointing out deficiencies promptly with responsible parties and following up to ensure that deficiencies are corrected. Plans the daily and weekly activities for each craft, including detailed schedule forecasts, within the scope of the overall construction schedule; provides detailed technical instructions for each foreman to ensure a clear understanding of the work, methods, manpower resources, and expected completion date; works with the project office staff to resolve any ambiguities in plans and drawings before construction begins.
Aircraft Maintenance Technician AOG Team Lead A&P General Dynamics CorpAircraft Maintenance Technician AOG Team Lead A&PWest Palm Beach, FLProvide daily work direction and hands-on technical guidance to maintenance technicians, ensuring efficiency, safety, and quality executionPrioritize and expedite critical AOG repairs to minimize aircraft downtime and support operational continuity. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.
Quality Assurance Inspector 2 - Nights Cirrus AircraftQuality Assurance Inspector 2 - NightsDuluth, Minnesota$20.80–$30.73 / hourFull timeIdentify, document, and report any non-conformance issues or defects, and work with cross-functional teams to implement corrective actions. Minimum of 2 years of experience in quality assurance or quality control within the aerospace industry, preferably in manufacturing or assembly environments.
Quality Assurance Inspector 2 Cirrus AircraftQuality Assurance Inspector 2Duluth, Minnesota$20.85–$31.27 / hourFull timeIdentify, document, and report any non-conformance issues or defects, and work with cross-functional teams to implement corrective actions. Minimum of 2 years of experience in quality assurance or quality control within the aerospace industry, preferably in manufacturing or assembly environments.