Quality Assurance - QC Inspector 1st shift Chromalloy Gas Turbine LLCQuality Assurance - QC Inspector 1st shiftSan Diego, CATests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Perform inspection activities within non‑final production cells to verify work in progress complies with engineering drawings, specifications, work instructions, and process requirements prior to final inspection.
Aerospace Drylube.10-85 Painter - 1st Shift Hytek Finishes Co.Aerospace Drylube.10-85 Painter - 1st ShiftCA$21.80–$24.80 / hourul>FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Mechanic - 1st and 2nd Shift Volt Information Sciences IncMechanic - 1st and 2nd ShiftSAN DIEGO, CA$25–$25.75 / hourThe ideal candidate will have 1-2 years of Mechanic skills - experience turning wrenches Strong knowledge of hand tools and power tools Aviation Mechanics Auto Mechanics Diesel Technicians or anyone with strong experience working on engines is ideal Must be able to pass a 7-year criminal background check and drug test as well as E-Verify. Move Forward with VoltVolt is immediately hiring multiple 1st and 2nd shiftMechanicsin San Diego CA.As aMechanicyou will Tear down and rebuild turbines engines from the ground up Use a variety of hand tools and power tools throughout the day Install and de-install components and parts using wrenches and other hand toolsThis is a full-time temp to hire opportunity.
Production Laborer, Aerospace Insulation 1st Shift Canopy A&DProduction Laborer, Aerospace Insulation 1st ShiftOntario, CaliforniaEXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.
RS Service Team Supervisor A&P (Team Morones) 1st Shift General Dynamics CorpRS Service Team Supervisor A&P (Team Morones) 1st ShiftVan Nuys, CA$56.40–$66.02 / hourp>Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft. Position Purpose: Assists Service Team Manager (STM) in managing projects including planning, scheduling, organizing, coordinating, & supervising work/labor hours to meet master schedule.
Aerospace Anodize Operator - 1st Shift Hytek Finishes Co.Aerospace Anodize Operator - 1st ShiftCA$18.50–$32 / hourFollow technique card, customer Purchase Orders, and drawings, and instructions from experienced Anodize Operators to prepare and process parts. • Ability to wear appropriate Personal Protective Equipment, including safety glasses, hearing protection, and other PPE based upon requirements in working area.
Aerospace Assembler/Tester - 1st Shift Parker Hannifin CorpAerospace Assembler/Tester - 1st ShiftCamarillo, CA$22.40–$34.70 / hourp>Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Performs moderately complex assembly/test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment.
QC Inspector 1st shift Chromalloy Gas Turbine LLCQC Inspector 1st shiftSan Diego, CAp>Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Perform inspection activities within non‑final production cells to verify work in progress complies with engineering drawings, specifications, work instructions, and process requirements prior to final inspection.
Machinist Sr (Tsugami Swiss Machine) - 1st Shift - Military Flight Controls Division Parker Hannifin CorpMachinist Sr (Tsugami Swiss Machine) - 1st Shift - Military Flight Controls DivisionIrvine, CA$26.65–$40.25 / hourParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Headquartered in Irvine, California, the Military Flight Controls Division is the global leader in fly-by-wire flight control systems and electrohydraulic products and offers the world''s most advanced motor design capabilities for flight controls.
Machinist Sr (Hone) - 1st Shift - Military Flight Controls Division Parker Hannifin CorpMachinist Sr (Hone) - 1st Shift - Military Flight Controls DivisionIrvine, CA$26.65–$40.25 / hourParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Headquartered in Irvine, California, the Military Flight Controls Division is the global leader in fly-by-wire flight control systems and electrohydraulic products and offers the world''s most advanced motor design capabilities for flight controls.
Assembler/Tester A - 1st Shift - Military Flight Controls Division Parker Hannifin CorpAssembler/Tester A - 1st Shift - Military Flight Controls DivisionIrvine, CA$24–$34.70 / hourol>Performs moderately complex assembly, test, and inspection functions utilizing mechanical skills, hand and power tools, mechanical, electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment. Headquartered in Irvine, California, the Military Flight Controls Division is the global leader in fly-by-wire flight control systems and electrohydraulic products and offers the worlds most advanced motor design capabilities for flight controls.
Final Assembly Team Lead - 1st shift only Concorde Battery CorpFinal Assembly Team Lead - 1st shift onlyWest Covina, CA$22–$25 / hourul>Read and follow assembly drawings • Use voltmeters, testing equipment, and basic hand tools • Enter and review test data • Solder circuit boards • Inspect parts and identify cosmetic defects • Assemble military and aviation batteries • Maintain a clean and safe work area • Support, mentor, and help train team members. We're a stable, growing company offering hands‑on training, long‑term career opportunities, and a consistent 1st shift schedule only - no nights.
Aerospace Assembler Technician II, 1st shift Moog IncAerospace Assembler Technician II, 1st shiftTorrance, CA$28–$36 / hourPerform various test operations on production or repair mechanical or hydraulic actuators using necessary hydraulic, mechanical, and electronic test equipment, fixtures and tools. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.
Assembler Technician II on 1st shift Moog IncAssembler Technician II on 1st shiftTorrance, CA$28–$36 / hourli>Perform various test operations on production or repair mechanical or hydraulic actuators using necessary hydraulic, mechanical, and electronic test equipment, fixtures and tools. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.
Assembly & Test Technician II, 1st shift MoogAssembly & Test Technician II, 1st shiftTorrance, Californiap style="text-align:inherit"/>Job Title: Assembly & Test Technician II, 1st shiftReporting To:. Otherwise, demonstrated ability to understand and apply all verbal, written and computer work instructions or training in English, and demonstrated ability to perform simple addition, subtraction, multiplication and division.
Assembler/Tester Sr. - 1st Shift - Military Flight Controls Division Parker Hannifin CorpAssembler/Tester Sr. - 1st Shift - Military Flight Controls DivisionIrvine, CA$26.65–$40.25 / hourp>RESPONSIBILITIES: Performs moderate to semi‐complex assembly/test functions utilizing mechanical skills, hand and power tools, mechanical/electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment. Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.
Assembler/Tester Sr - 1st Shift - Military Flight Controls Division Parker Hannifin CorpAssembler/Tester Sr - 1st Shift - Military Flight Controls DivisionIrvine, CA$26.65–$40.25 / hourHeadquartered in Irvine, California, the Military Flight Controls Division is the global leader in fly-by-wire flight control systems and electrohydraulic products, offering the worlds most advanced motor design capabilities for flight controls. Performs moderate to semi-complex assembly and test functions utilizing mechanical skills, hand and power tools, mechanical, electronic tools, test equipment, assembly fixtures, and inspection measurement equipment in a manufacturing environment.
NDE Level II Inspector, Certified Welding Inspector Starship Mechanisms - 1st Shift Space Exploration Technologies CorpNDE Level II Inspector, Certified Welding Inspector Starship Mechanisms - 1st ShiftHawthorne, CA$25–$31 / hourBASIC QUALIFICATIONS: High school diploma or equivalency certificate Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: • Eddy current (ET) • Radiography (RT) • Digital radiography (DR) • Dye penetrant (PT) • Computed radiography (CR) • Phase array (PAUT) • Ultrasonic (UT) • Ultrasonic shear wave (UTSW) OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR Completion of a certified NDE/NDT school or course. RESPONSIBILITIES: • Perform surface NDE inspections, including but not limited to VT and PT • Interpret, evaluate, communicate, and report findings to production and engineering teams • Interpret and review engineering drawings as required • Support the development of NDE inspection techniques for complex geometries • Support research and development of system qualification and certification for critical processes • Assist in training and developing others on the team.
NDE Level II Inspector Starship Mechanisms - 1st Shift Space Exploration Technologies CorpNDE Level II Inspector Starship Mechanisms - 1st ShiftHawthorne, CA$25–$31 / hourBASIC QUALIFICATIONS: High school diploma or equivalency certificate Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: • Eddy current (ET) • Radiography (RT) • Digital radiography (DR) • Dye penetrant (PT) • Computed radiography (CR) • Phase array (PAUT) • Ultrasonic (UT) • Ultrasonic shear wave (UTSW) OR 3+ years of inspection experience in an aerospace, aviation, military or a precision machined parts manufacturing environment OR Completion of a certified NDE/NDT school or course. RESPONSIBILITIES: • Perform surface NDE inspections, including but not limited to VT and PT • Interpret, evaluate, communicate, and report findings to production and engineering teams • Interpret and review engineering drawings as required • Support the development of NDE inspection techniques for complex geometries • Support research and development of system qualification and certification for critical processes • Assist in training and developing others on the team.
Now Hiring ! QC Receiving Inspector | $25 - $27/hr. | 1st Shift | 838355 HelpmatesNow Hiring ! QC Receiving Inspector | $25 - $27/hr. | 1st Shift | 838355Huntington Beach, CA$26–$27 / hourJoin a leading organization specializing in aviation quality assurance as a 1st Shift QC Receiving Inspector in Huntington Beach, CA and make an impact every day. Experience or familiarity with quality control in manufacturing or aerospace (raw materials, electrical components, machined parts, and/or injection molded products).
Repair & Overhaul Technician I - 1st Shift Safran SARepair & Overhaul Technician I - 1st ShiftCarson, CAp>Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience. • Ability to utilize work instructions software such as but not limited to Pro Works • Ability to read and comprehend schematics and work instructions • Perform work in a safe manner in accordance with Environment, Health & Safety requirements • Support continuous improvement activities such as but not limited to shadow board tools, re-layout area, etc.
Machinist 1st shift Chromalloy Gas Turbine LLCMachinist 1st shiftSan Diego, CAWe are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
Inspector IV, Quality (1st Shift) Howmet Aerospace IncInspector IV, Quality (1st Shift)Carson, CAProficient and able to train others in First Article requirements per AS9102Know and understand Federal Aviation Administration requirements and impacts on the businessPrior experience in a Quality Inspector roleAbility to read and interpret documents such as safety rules, operating instructions, and procedures manualsAbility to write routine reports and correspondenceAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Basic Qualifications:Four years related quality experience or training in accordance with the defined skills training matrix progression; or equivalent combination of education and experience.
Inspection Supervisor - 1st Shift - Aerospace MFG. Eaton Corporation PlcInspection Supervisor - 1st Shift - Aerospace MFG.Camarillo, CA$99,000–$125,000 / yearp>Additionally, the incumbent will encourage and support employee participation at all levels in the resolution of product quality problems, implement employee recognition, and promote positive Company-oriented attitudes towards quality assurance and reliability of Eaton Aerospace products. This position provides leadership, mentoring, evaluation and development of the Quality Inspectors .Establish and maintain robust process controls and improvement programs related to Suppliers, Receiving Inspection, In-process Inspection, Final Inspection and Quality Assurance.
Receiving Inspector- 1st Shift Eaton Corporation PlcReceiving Inspector- 1st ShiftLos Angeles, CAli>Use precision measurement equipment such as, but not limited to, calipers, micrometers, pin gages, thread plugs, thread ring gages, thread gages, surface plates, spring tester, optical comparator, surface plate. In this function you will: Inspect (Incoming and/or in-process) aerospace precision machined components and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
Quality Engineer Airframe Assembly (1st Shift) Joby Aviation IncQuality Engineer Airframe Assembly (1st Shift)Marina, CA$70,304–$113,800 / yearp>Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. We're looking for talented, committed individuals to join our team as we push onward toward certifying the Joby aircraft, scaling our manufacturing, and launching our initial commercial service.
Quality Engineer - Airframe Assembly (1st Shift) Joby AviationQuality Engineer - Airframe Assembly (1st Shift)Marina, California$106,700–$177,000 / yearOverview: Joby Aviation is seeking a highly organized, passionate individual to join our quality engineering team as Quality Engineer - Airframe Assembly (1st Shift). Company Overview: Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most.Quality Engineer Integration (1st Shift) Joby AviationQuality Engineer Integration (1st Shift)Marina, California$106,700–$177,000 / yearCompany Overview: Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. Required: Bachelor's degree in engineering, technology, or related field OR in lieu of a degree, 4 years minimum experience working as an engineer in the relevant field.Quality Engineer Integration (1st Shift) Joby Aviation IncQuality Engineer Integration (1st Shift)Marina, CA$106,700–$177,000 / yearp>Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. Bachelor''s degree in engineering, technology, or related field OR in lieu of a degree, 4 years minimum experience working as an engineer in the relevant field.Sheriff's Aviation Mechanic County of San BernardinoSheriff's Aviation MechanicSan Bernardino, CA$77,376–$106,371.20 / yearp>The Sheriffs Department is recruiting for Aviation Mechanics who perform skilled airframe and powerplant maintenance, repairs and modifications on fixed-wing and rotary-wing aircraft, participate in flight checks, ensure air worthiness, and maintain records, reports, and logs. An excellent candidate for this position will possess recent experience in the maintenance and repair of Bell 212, Bell 412 and UH-1H, Airbus H125 helicopters, as well as experience with fixed-wing, light single and twin-engine airplanes; factory trained experience is preferred.Aviation Maintenance Technician Instructor California Aeronautical UniversityAviation Maintenance Technician InstructorBakersfield, CA$25–$30 / hourThe Aviation Maintenance Technician (AMT) Instructor is responsible for planning, organizing, and operating the AMT curriculum designed to prepare students for the Federal Aviation Administration certification and an entry-level position in the aircraft maintenance industry. The successful candidate will work to eliminate equity gaps and help students succeed in their chosen career path and in what is an increasingly diverse work environment.NewAirframe & Powerplant Systems Instructor (Aviation Maintenance) UTI Trade SchoolAirframe & Powerplant Systems Instructor (Aviation Maintenance)Long Beach, CA$38–$41 / hourp>As an Aviation Maintenance Instructor, you will shape the skills and mindset of future technicians by translating your knowledge of aircraft systems and components into immersive, hands-on learning. Lead hands-on training: demonstrate real maintenance techniques and guide students through diagnosing, maintaining, and repairing aircraft systems.NewAviation Maintenance Administrator Space Exploration Technologies CorpAviation Maintenance AdministratorHawthorne, CAp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RESPONSIBILITIES: Perform scheduled and unscheduled maintenance on Bell 429 helicopters in accordance with manufacturer manuals, FAA regulations, and company procedures.Aviation Maintenance Technician SafeTechAviation Maintenance TechnicianCity of Industry, California$21–$21Founded in 1984, the company operates across the USA through a network of regional support centers located in Houston, Dallas, Atlanta, Indianapolis, Miami, Los Angeles, Phoenix, and Ridgeland SC (near Savannah) Our mission is to provide the best support possible for our customers in the Aviation industry. Over the years, SafeTech has developed strong relationships with original equipment manufacturers, as well as after-market parts and service establishments, in an effort to provide the most complete, accurate, cost effective and timely service available in the industry.Aircraft Maintenance D - Aviation Life Support Technician (ALSS) L3Harris Technologies IncAircraft Maintenance D - Aviation Life Support Technician (ALSS)CA$82,500–$153,000 / yearWith customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Able to be certified to operate self-propelled vehicles such as forklifts, scissor lifts, boom lifts, aircraft support equipment and towing vehicles.Aviation Maintenance Part-Time Instructor Pool Cuesta CollegeAviation Maintenance Part-Time Instructor PoolSan Luis Obispo, CA$84.80–$156.91 / hourYou may also access the complete text of this report at the following website address: https://www.cuesta.edu/community/publicsafety/crime-information/clery-act.html. More information regarding our current salary schedules can be found on the following link: https://www.cuesta.edu/about/human-resources/employee/cba-salary-schedules.html.Aviation Maintenance Technician 135 Air MethodsAviation Maintenance Technician 135Byron, CaliforniaHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Housing / affordability: Compared to many parts of the Bay Area, Antioch has been noted for having more “affordable” land and housing, which has attracted residents commuting to other Bay Area employment centers.Aviation Systems Administrator Metrea LLCAviation Systems AdministratorMoreno Valley, CAp>Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas-including airborne ISR, electronic warfare, secure communications, aerial refueling, special mission aviation, aerial firefighting, and advanced simulation. Wherever we operate, we build vertically integrated full stacks of capability-designing, building, and operating turnkey solutions that let customers scale capacity while benefiting from continuous cycles of innovation.Aviation Maintenance Technician 135 Air Methods CorpAviation Maintenance Technician 135CAEssential Functions and Responsibilities include the following:• Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations• Upon installation or removal of any component or assembly, the Mechanic shall verify by physical inspection or markings on the part that the part number and serial number match the associated documentation • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals to include specific chapters• Actively participates in the continuous improvement phase (level 4) of the company's Safety Management System (SMS) and is familiar with the SMS policies, processes, and procedures• Maintains work area in a clean and professional mannerResponsible for correcting compliance or safety issues when directed by the Director of Operations, Director of Maintenance, Chief Pilot, Regional Maintenance Director, Director of Safety, or Lead Mechanic• Responsible for advising the Pilot in Command (PIC) of any maintenance issues that would take an aircraft out of service• Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on including• Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensure prompt repairs for operational readiness• Other Duties as assigned. Education & Experience• High school diploma or general education degree (GED) and 2 to 5 years' related experience and/or training; or equivalent combination of education and experience• Factory airframe/power plant schools preferred, active/current A&P REQUIRED• FAR 135 operations preferred Skills• Electrical troubleshooting and refined vibration-balancing• Sheet metal and composite repair procedures• Ability to read and understand various documents such as 337's, Service Bulletins, AD's, etc.• Ability to multi-task in a fast paced, constantly changing environment• Ability to be a team player with a professional attitude• Ability to work a flexible schedule including overtime and 24/7 on-call rotation• Efficient in the use of electronic or paper based manuals and able to navigate through vendor data to find necessary information• Ability to learn and utilize the Company's ERP system (Ramco)• Strong communication skills• Ability to apply creativity and problem solving skills in troubleshooting workComputer Skills• Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook • RAMCO experience preferred Certificates, Licenses, Registrations• FAA A&P License in good standing.Experience A&P Aviation Mechanic Instructor Universal Technical Institute IncExperience A&P Aviation Mechanic InstructorLong Beach, CA$36–$42 / hourHands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing aircraft systems. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern aviation maintenance technology.Experienced A&P Aviation Instructor Universal Technical Institute IncExperienced A&P Aviation InstructorLong Beach, CA$38–$41.72 / hourli>Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing aircraft systems. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern aviation maintenance technology.Aviation Maintenance Technician HEICO CorpAviation Maintenance TechnicianTemecula, CAEssential Duties and Responsibilities: Perform and properly document part maintenance functions under guidance, to include: disassembly, cleaning, inspections, WO evaluation, ordering required parts, piece part repair, and testing, in compliance with specific approved documentation and procedures. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; is able to multi-task and be able to change priorities as required by customer driven demands.CTE - Aviation Maintenance Technology Teacher MUROC JOINT UNIFIED SCHOOL DISTRICTCTE - Aviation Maintenance Technology TeacherCA$52,283–$108,519 / yearli>Evaluates students' academic and social growth, keeps appropriate records, prepares progress reports (grades), and communicates with parents on individual student progress as needed. Maintains professional competence through participation in various in-service educational activities provided by the district and self-selected professional growth activities.Senior Aviation Maintenance Engineer - Advanced Effects Anduril Industries IncSenior Aviation Maintenance Engineer - Advanced EffectsCosta Mesa, CA$47–$62 / hourp>To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Assist with many aspects of aircraft fabrication, assembly, and operation including structural fabrication, mechanical integration (flight control surfaces, propulsion, etc.), composites fabrication, and avionics build/integration/test.Senior Aviation Maintenance Engineer, Maneuver Dominance Anduril Industries IncSenior Aviation Maintenance Engineer, Maneuver DominanceCosta Mesa, CAul>Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test. This position will be filled by a highly motivated Airframe and Power Plant Mechanic with a passion for developmental flight test of a new and revolutionary products contributing valued mechanical expertise in all fields of aircraft maintenance.Aviation Safety Inspector Fire Support U.S. Department of AgricultureAviation Safety Inspector Fire SupportRedding, CA$89,508–$138,370 / yearSpecialized experience is defined as one or more of the following: Monitoring the maintenance activities of an aviation organization engaged in natural resource and wildland fire activities to ensure compliance contractual requirements, Federal regulations, and good safety practices; and/or Assisting in managing an aviation maintenance program that includes inspection and approval of contractor and cooperator aircraft, fuel service vehicles, support equipment, and maintenance personnel; and/or Inspecting, maintaining, and approving airworthiness of multi-engine (two or more) piston or twin engine turboprop/turbo-jet aircraft after major repairs or alterations; and/or Maintaining, scheduling, and approving inspections and maintenance actions of assigned aircraft. Specialized experience is defined as one or more of the following: Accomplishing the maintenance activities of an aviation organization engaged in natural resource and wildland fire activities to ensure compliance with contractual requirements, federal regulations, and good safety practices; and/or Managing an aviation maintenance program that included inspection and approval of aircraft, fuel service vehicles, support equipment, and maintenance personnel; and/or Providing oversight to the inspection and approval of the airworthiness of single or multi engine piston or turboprop aircraft after major repairs or alterations; and/or Providing extensive technical, policy, and regulatory guidance in relation to avionics to internal and external customers.Supervisor, Manufacturing Operations - 2nd Shift (Onsite) RTX CorpSupervisor, Manufacturing Operations - 2nd Shift (Onsite)Riverside, CAp>At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Production Supervisor - 2nd shift Ontic Engineering and Manufacturing IncProduction Supervisor - 2nd shiftChatsworth, CA$85,000–$100,000 / yearMain Qualifications: Associate's or Bachelor's degree in Aerospace, Mechanical Engineering, Manufacturing, or related technical field (or equivalent hands-on experience). assemblies, a test lab that specializes in fuel/hydraulic ATP procedures, and a machine shop that supports in process assembly and/or precision finishing of component parts.Composite Tool Maintenance Technician All Shifts Joby Aviation IncComposite Tool Maintenance Technician All ShiftsMarina, CA$18–$32 / houror less • Must wear PPE when required • Have no known allergies to epoxies or other composites materials and able to become certified to wear a respirator • Must be able to walk or stand for extended periods • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces • Ability to become forklift, crane, or equipment certified. • 1+ year of manufacturing experience • Experience working in a regulated manufacturing environment • Experience in a high-volume production environment that relies on a well-defined process to achieve maximum efficiency • Familiarity with lean manufacturing or 5S environments.123Resume ResourcesFree Resume TemplatesFree Resume Builder
Quality Engineer Integration (1st Shift) Joby AviationQuality Engineer Integration (1st Shift)Marina, California$106,700–$177,000 / yearCompany Overview: Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. Required: Bachelor's degree in engineering, technology, or related field OR in lieu of a degree, 4 years minimum experience working as an engineer in the relevant field.
Quality Engineer Integration (1st Shift) Joby Aviation IncQuality Engineer Integration (1st Shift)Marina, CA$106,700–$177,000 / yearp>Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. Bachelor''s degree in engineering, technology, or related field OR in lieu of a degree, 4 years minimum experience working as an engineer in the relevant field.
Sheriff's Aviation Mechanic County of San BernardinoSheriff's Aviation MechanicSan Bernardino, CA$77,376–$106,371.20 / yearp>The Sheriffs Department is recruiting for Aviation Mechanics who perform skilled airframe and powerplant maintenance, repairs and modifications on fixed-wing and rotary-wing aircraft, participate in flight checks, ensure air worthiness, and maintain records, reports, and logs. An excellent candidate for this position will possess recent experience in the maintenance and repair of Bell 212, Bell 412 and UH-1H, Airbus H125 helicopters, as well as experience with fixed-wing, light single and twin-engine airplanes; factory trained experience is preferred.
Aviation Maintenance Technician Instructor California Aeronautical UniversityAviation Maintenance Technician InstructorBakersfield, CA$25–$30 / hourThe Aviation Maintenance Technician (AMT) Instructor is responsible for planning, organizing, and operating the AMT curriculum designed to prepare students for the Federal Aviation Administration certification and an entry-level position in the aircraft maintenance industry. The successful candidate will work to eliminate equity gaps and help students succeed in their chosen career path and in what is an increasingly diverse work environment.
NewAirframe & Powerplant Systems Instructor (Aviation Maintenance) UTI Trade SchoolAirframe & Powerplant Systems Instructor (Aviation Maintenance)Long Beach, CA$38–$41 / hourp>As an Aviation Maintenance Instructor, you will shape the skills and mindset of future technicians by translating your knowledge of aircraft systems and components into immersive, hands-on learning. Lead hands-on training: demonstrate real maintenance techniques and guide students through diagnosing, maintaining, and repairing aircraft systems.
NewAviation Maintenance Administrator Space Exploration Technologies CorpAviation Maintenance AdministratorHawthorne, CAp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RESPONSIBILITIES: Perform scheduled and unscheduled maintenance on Bell 429 helicopters in accordance with manufacturer manuals, FAA regulations, and company procedures.
Aviation Maintenance Technician SafeTechAviation Maintenance TechnicianCity of Industry, California$21–$21Founded in 1984, the company operates across the USA through a network of regional support centers located in Houston, Dallas, Atlanta, Indianapolis, Miami, Los Angeles, Phoenix, and Ridgeland SC (near Savannah) Our mission is to provide the best support possible for our customers in the Aviation industry. Over the years, SafeTech has developed strong relationships with original equipment manufacturers, as well as after-market parts and service establishments, in an effort to provide the most complete, accurate, cost effective and timely service available in the industry.
Aircraft Maintenance D - Aviation Life Support Technician (ALSS) L3Harris Technologies IncAircraft Maintenance D - Aviation Life Support Technician (ALSS)CA$82,500–$153,000 / yearWith customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Able to be certified to operate self-propelled vehicles such as forklifts, scissor lifts, boom lifts, aircraft support equipment and towing vehicles.
Aviation Maintenance Part-Time Instructor Pool Cuesta CollegeAviation Maintenance Part-Time Instructor PoolSan Luis Obispo, CA$84.80–$156.91 / hourYou may also access the complete text of this report at the following website address: https://www.cuesta.edu/community/publicsafety/crime-information/clery-act.html. More information regarding our current salary schedules can be found on the following link: https://www.cuesta.edu/about/human-resources/employee/cba-salary-schedules.html.
Aviation Maintenance Technician 135 Air MethodsAviation Maintenance Technician 135Byron, CaliforniaHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Housing / affordability: Compared to many parts of the Bay Area, Antioch has been noted for having more “affordable” land and housing, which has attracted residents commuting to other Bay Area employment centers.
Aviation Systems Administrator Metrea LLCAviation Systems AdministratorMoreno Valley, CAp>Metrea delivers effects-as-a-service to national security partners across five domains and more than a dozen mission areas-including airborne ISR, electronic warfare, secure communications, aerial refueling, special mission aviation, aerial firefighting, and advanced simulation. Wherever we operate, we build vertically integrated full stacks of capability-designing, building, and operating turnkey solutions that let customers scale capacity while benefiting from continuous cycles of innovation.
Aviation Maintenance Technician 135 Air Methods CorpAviation Maintenance Technician 135CAEssential Functions and Responsibilities include the following:• Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations• Upon installation or removal of any component or assembly, the Mechanic shall verify by physical inspection or markings on the part that the part number and serial number match the associated documentation • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals to include specific chapters• Actively participates in the continuous improvement phase (level 4) of the company's Safety Management System (SMS) and is familiar with the SMS policies, processes, and procedures• Maintains work area in a clean and professional mannerResponsible for correcting compliance or safety issues when directed by the Director of Operations, Director of Maintenance, Chief Pilot, Regional Maintenance Director, Director of Safety, or Lead Mechanic• Responsible for advising the Pilot in Command (PIC) of any maintenance issues that would take an aircraft out of service• Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on including• Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensure prompt repairs for operational readiness• Other Duties as assigned. Education & Experience• High school diploma or general education degree (GED) and 2 to 5 years' related experience and/or training; or equivalent combination of education and experience• Factory airframe/power plant schools preferred, active/current A&P REQUIRED• FAR 135 operations preferred Skills• Electrical troubleshooting and refined vibration-balancing• Sheet metal and composite repair procedures• Ability to read and understand various documents such as 337's, Service Bulletins, AD's, etc.• Ability to multi-task in a fast paced, constantly changing environment• Ability to be a team player with a professional attitude• Ability to work a flexible schedule including overtime and 24/7 on-call rotation• Efficient in the use of electronic or paper based manuals and able to navigate through vendor data to find necessary information• Ability to learn and utilize the Company's ERP system (Ramco)• Strong communication skills• Ability to apply creativity and problem solving skills in troubleshooting workComputer Skills• Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook • RAMCO experience preferred Certificates, Licenses, Registrations• FAA A&P License in good standing.
Experience A&P Aviation Mechanic Instructor Universal Technical Institute IncExperience A&P Aviation Mechanic InstructorLong Beach, CA$36–$42 / hourHands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing aircraft systems. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern aviation maintenance technology.
Experienced A&P Aviation Instructor Universal Technical Institute IncExperienced A&P Aviation InstructorLong Beach, CA$38–$41.72 / hourli>Hands-On Training: Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing aircraft systems. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern aviation maintenance technology.
Aviation Maintenance Technician HEICO CorpAviation Maintenance TechnicianTemecula, CAEssential Duties and Responsibilities: Perform and properly document part maintenance functions under guidance, to include: disassembly, cleaning, inspections, WO evaluation, ordering required parts, piece part repair, and testing, in compliance with specific approved documentation and procedures. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; is able to multi-task and be able to change priorities as required by customer driven demands.
CTE - Aviation Maintenance Technology Teacher MUROC JOINT UNIFIED SCHOOL DISTRICTCTE - Aviation Maintenance Technology TeacherCA$52,283–$108,519 / yearli>Evaluates students' academic and social growth, keeps appropriate records, prepares progress reports (grades), and communicates with parents on individual student progress as needed. Maintains professional competence through participation in various in-service educational activities provided by the district and self-selected professional growth activities.
Senior Aviation Maintenance Engineer - Advanced Effects Anduril Industries IncSenior Aviation Maintenance Engineer - Advanced EffectsCosta Mesa, CA$47–$62 / hourp>To ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind: No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Assist with many aspects of aircraft fabrication, assembly, and operation including structural fabrication, mechanical integration (flight control surfaces, propulsion, etc.), composites fabrication, and avionics build/integration/test.
Senior Aviation Maintenance Engineer, Maneuver Dominance Anduril Industries IncSenior Aviation Maintenance Engineer, Maneuver DominanceCosta Mesa, CAul>Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test. This position will be filled by a highly motivated Airframe and Power Plant Mechanic with a passion for developmental flight test of a new and revolutionary products contributing valued mechanical expertise in all fields of aircraft maintenance.
Aviation Safety Inspector Fire Support U.S. Department of AgricultureAviation Safety Inspector Fire SupportRedding, CA$89,508–$138,370 / yearSpecialized experience is defined as one or more of the following: Monitoring the maintenance activities of an aviation organization engaged in natural resource and wildland fire activities to ensure compliance contractual requirements, Federal regulations, and good safety practices; and/or Assisting in managing an aviation maintenance program that includes inspection and approval of contractor and cooperator aircraft, fuel service vehicles, support equipment, and maintenance personnel; and/or Inspecting, maintaining, and approving airworthiness of multi-engine (two or more) piston or twin engine turboprop/turbo-jet aircraft after major repairs or alterations; and/or Maintaining, scheduling, and approving inspections and maintenance actions of assigned aircraft. Specialized experience is defined as one or more of the following: Accomplishing the maintenance activities of an aviation organization engaged in natural resource and wildland fire activities to ensure compliance with contractual requirements, federal regulations, and good safety practices; and/or Managing an aviation maintenance program that included inspection and approval of aircraft, fuel service vehicles, support equipment, and maintenance personnel; and/or Providing oversight to the inspection and approval of the airworthiness of single or multi engine piston or turboprop aircraft after major repairs or alterations; and/or Providing extensive technical, policy, and regulatory guidance in relation to avionics to internal and external customers.
Supervisor, Manufacturing Operations - 2nd Shift (Onsite) RTX CorpSupervisor, Manufacturing Operations - 2nd Shift (Onsite)Riverside, CAp>At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Production Supervisor - 2nd shift Ontic Engineering and Manufacturing IncProduction Supervisor - 2nd shiftChatsworth, CA$85,000–$100,000 / yearMain Qualifications: Associate's or Bachelor's degree in Aerospace, Mechanical Engineering, Manufacturing, or related technical field (or equivalent hands-on experience). assemblies, a test lab that specializes in fuel/hydraulic ATP procedures, and a machine shop that supports in process assembly and/or precision finishing of component parts.
Composite Tool Maintenance Technician All Shifts Joby Aviation IncComposite Tool Maintenance Technician All ShiftsMarina, CA$18–$32 / houror less • Must wear PPE when required • Have no known allergies to epoxies or other composites materials and able to become certified to wear a respirator • Must be able to walk or stand for extended periods • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces • Ability to become forklift, crane, or equipment certified. • 1+ year of manufacturing experience • Experience working in a regulated manufacturing environment • Experience in a high-volume production environment that relies on a well-defined process to achieve maximum efficiency • Familiarity with lean manufacturing or 5S environments.