NewManufacturing Technician B - 1st Shift L3Harris TechnologiesManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewManufacturing Technician C - 1st Shift L3Harris TechnologiesManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Aerospace Cadmium Assistant - 1st Shift Hytek FinishesAerospace Cadmium Assistant - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Zinc Nickel Assistant - 1st Shift Hytek FinishesAerospace Zinc Nickel Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Chrome Assistant - 1st Shift Hytek FinishesAerospace Chrome Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Anodize Operator - 1st Shift Hytek FinishesAerospace Anodize Operator - 1st ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Shipping Clerk and Back Up Driver - 1st Shift Hytek FinishesShipping Clerk and Back Up Driver - 1st ShiftWoodmont Beach, WAFull timeThis position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in the facility. Prioritizes and processes orders from certification department; verifies documentation is complete and places orders in the proper area for shipping via Hytek truck or common carrier.
Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Aerospace Cadmium Masker - 2nd Shift Hytek FinishesAerospace Cadmium Masker - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Anodize Operator - 2nd Shift Hytek FinishesAerospace Anodize Operator - 2nd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Abrasive Blast Operator - 3rd Shift Hytek FinishesAerospace Abrasive Blast Operator - 3rd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Paint Masker - 3rd Shift Hytek FinishesAerospace Paint Masker - 3rd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Painter - 3rd Shift Hytek FinishesAerospace Painter - 3rd ShiftKent, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 2nd Shift Hytek FinishesAerospace Painter - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.
Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourThis position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.
Production Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour
Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour
Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.
Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WashingtonThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Assembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Tool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
1st Shift Medical Device Assembler iMPact Business Group1st Shift Medical Device AssemblerRedmond, WAAssembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements.
Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).
Cascade Layup (Kit Inspect) 1st shift - SCI SafranCascade Layup (Kit Inspect) 1st shift - SCIMarysville, WA$35,760–$56,190 / yearFinalizes the layup build of the Cascade by: Organizing mandrels into rows in sequential order per XRMY 13-530 and MSC636-1 Properly compacts rows per XRMY 13-530 and MSC636-1 Ensures strong backs are at correct height per XRMY 13-530 and MSC636-1 Performs raw material layup on the surface of strong backs and tool surface per XRMY 13-530 and MSC636-1 Performs inspection of the cascade build per XRMY 13-530 and MSC636-1 Closes the lid of the cascade component Uses the overhead crane to put the lid onto its corresponding LM Ensures that the lid is seated correctly per XRMY 13-530 and MSC636-1 Measures the gap between details of LM per XRMY 13-530 and MSC636-1 Safely handles various regulated materials used in the process. **Annual salary** USD 35,760 - 56,190 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Tool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.
Electrical Mechanic 3 1st Shift - SCI SafranElectrical Mechanic 3 1st Shift - SCIMarysville, WA$22.87–$35.94 / hourAnnual salary** USD $22.87 - $35.94 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182622 **Job details** **Domain** Production **Job field / Job profile** Electrical mechatronics - Electrical and mechatronics machinery **Job title** Electrical Mechanic 3 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** - Use a variety of tools and equipment to assemble product according to required specifications and procedures.
Structures Mechanic Ceilings 1st Shift - SCI SafranStructures Mechanic Ceilings 1st Shift - SCIMarysville, WA$20.79–$32.68 / hourAnnual salary** USD $20.79 - $32.68 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182625 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Structures Mechanic Ceilings 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications.
Assembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Staff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAAnalyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.
Kit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.
Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.
Order Desk Operator 1st shift - Seattle WA Xerox CorpOrder Desk Operator 1st shift - Seattle WASeattle, WAToday, Xerox is continuing its legacy of innovation to deliver client-centric and digitally-driven technology solutions and meet the needs of today's global, distributed workforce. Actual salaries will vary based on factors including, but not limited to, geographic location, market competition, and/or the successful applicant's education, experience, knowledge, skills, and abilities.
Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.