NewManufacturing Technician B - 1st Shift L3Harris TechnologiesManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourp>By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewInsurance Agent HealthMarketsInsurance AgentSeattle, WAHealthMarkets independent licensed insurance agents shall for all purposes be deemed to be independent contractors and shall have no authority to act or represent themselves as an employee or partner of HealthMarkets Insurance Agency. HealthMarkets is a technology-enabled health insurance agency delivering high-touch, customized health and supplemental insurance solutions to individuals, families and small businesses.
Insurance Agent - Washington State American Family InsuranceInsurance Agent - Washington StateBellevue, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Yelm, WA American Family InsuranceInsurance Agent - Yelm, WASeattle, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Woodinville, WA American Family InsuranceInsurance Agent - Woodinville, WAWoodinville, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Bellevue, WA American Family InsuranceInsurance Agent - Bellevue, WABellevue, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourli>This position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hourProduction Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Andrew Neighbors + Phone 425-259-9258 Ext 211 + Email andrewn@royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.SHIPPING AND RECEIVING (1st SHIFT) Royell Manufacturing, Inc.SHIPPING AND RECEIVING (1st SHIFT)Everett, WA$21–$25 / hourInventory Control/Picking + Place completed orders/inventory into pre-existing locations in stores + Locate and accurately pull stock required for shipping from stores locations + Maintain accurate stock locations and packaging + Pick orders for Assembly jobs and shipping kits + Perform stock checks and cycle counts as required Receiving + Validate incoming shipments against packing slips and perform initial receiving transactions (MOD) + Inspect incoming parts from finish operations, ensuring correct finish is applied, masking was done per drawing, finishes applied and documented on certification paperwork matches our PO requirements, and part counts match. Shipping + Pick parts per an assigned shipping schedule and package for shipping + Validate part numbers, part quantity, and shipping requirements to ensure the correct parts are delivered, on time and in the right quantity + Package adequately to protect parts during transit + Produce required packing slips, Advanced Shipment Notification, and carrier labels + Organize outgoing shipments for carrier pickup Traceability and accountability + Completes all manufacturing documentation and forms including but not limited to status updates on schedules, filling all required fields and signing work orders, scrap and defect tags.Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washingtonp/>The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Local CDL A Driver - Home Daily, 1st Shift GXO Government Services, LLCLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers.Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : Associate Degree Required experience : More than 5 years Professional status : Supervisory staff Spoken language(s) : English Fluent Salary range : USD 57,620 - 90,550 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewTool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Bagger Operator 1st Shift Safran SABagger Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Material Handler - 1st Shift GXO Government Services, LLCMaterial Handler - 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.Account Manager - 1st Shift GXO Government Services, LLCAccount Manager - 1st ShiftEverett, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.NewAssembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewStaff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAli>Analyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.NewTool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).NewAssembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** YesKit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWA$23–$29 / hourp>RESPONSIBILITIES: • Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.Local CDL A Driver - Home Daily, 1st Shift GXO Logistics IncLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAli>Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.1234Resume ResourcesFree Resume TemplatesFree Resume BuilderGet noticed by top employers!Upload your resume to let employers know you're open to 1st Shift Insurance job opportunities. Plus, receive relevant job recommendations in your inbox.Send Us Your ResumeCreate A Free Account
Insurance Agent - Yelm, WA American Family InsuranceInsurance Agent - Yelm, WASeattle, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Woodinville, WA American Family InsuranceInsurance Agent - Woodinville, WAWoodinville, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Bellevue, WA American Family InsuranceInsurance Agent - Bellevue, WABellevue, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourli>This position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hourProduction Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Andrew Neighbors + Phone 425-259-9258 Ext 211 + Email andrewn@royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.SHIPPING AND RECEIVING (1st SHIFT) Royell Manufacturing, Inc.SHIPPING AND RECEIVING (1st SHIFT)Everett, WA$21–$25 / hourInventory Control/Picking + Place completed orders/inventory into pre-existing locations in stores + Locate and accurately pull stock required for shipping from stores locations + Maintain accurate stock locations and packaging + Pick orders for Assembly jobs and shipping kits + Perform stock checks and cycle counts as required Receiving + Validate incoming shipments against packing slips and perform initial receiving transactions (MOD) + Inspect incoming parts from finish operations, ensuring correct finish is applied, masking was done per drawing, finishes applied and documented on certification paperwork matches our PO requirements, and part counts match. Shipping + Pick parts per an assigned shipping schedule and package for shipping + Validate part numbers, part quantity, and shipping requirements to ensure the correct parts are delivered, on time and in the right quantity + Package adequately to protect parts during transit + Produce required packing slips, Advanced Shipment Notification, and carrier labels + Organize outgoing shipments for carrier pickup Traceability and accountability + Completes all manufacturing documentation and forms including but not limited to status updates on schedules, filling all required fields and signing work orders, scrap and defect tags.Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washingtonp/>The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Local CDL A Driver - Home Daily, 1st Shift GXO Government Services, LLCLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers.Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : Associate Degree Required experience : More than 5 years Professional status : Supervisory staff Spoken language(s) : English Fluent Salary range : USD 57,620 - 90,550 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewTool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Bagger Operator 1st Shift Safran SABagger Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Material Handler - 1st Shift GXO Government Services, LLCMaterial Handler - 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.Account Manager - 1st Shift GXO Government Services, LLCAccount Manager - 1st ShiftEverett, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.NewAssembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewStaff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAli>Analyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.NewTool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).NewAssembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** YesKit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWA$23–$29 / hourp>RESPONSIBILITIES: • Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.Local CDL A Driver - Home Daily, 1st Shift GXO Logistics IncLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAli>Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.1234Resume ResourcesFree Resume TemplatesFree Resume Builder
Insurance Agent - Woodinville, WA American Family InsuranceInsurance Agent - Woodinville, WAWoodinville, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Insurance Agent - Bellevue, WA American Family InsuranceInsurance Agent - Bellevue, WABellevue, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourli>This position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hourProduction Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Andrew Neighbors + Phone 425-259-9258 Ext 211 + Email andrewn@royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.SHIPPING AND RECEIVING (1st SHIFT) Royell Manufacturing, Inc.SHIPPING AND RECEIVING (1st SHIFT)Everett, WA$21–$25 / hourInventory Control/Picking + Place completed orders/inventory into pre-existing locations in stores + Locate and accurately pull stock required for shipping from stores locations + Maintain accurate stock locations and packaging + Pick orders for Assembly jobs and shipping kits + Perform stock checks and cycle counts as required Receiving + Validate incoming shipments against packing slips and perform initial receiving transactions (MOD) + Inspect incoming parts from finish operations, ensuring correct finish is applied, masking was done per drawing, finishes applied and documented on certification paperwork matches our PO requirements, and part counts match. Shipping + Pick parts per an assigned shipping schedule and package for shipping + Validate part numbers, part quantity, and shipping requirements to ensure the correct parts are delivered, on time and in the right quantity + Package adequately to protect parts during transit + Produce required packing slips, Advanced Shipment Notification, and carrier labels + Organize outgoing shipments for carrier pickup Traceability and accountability + Completes all manufacturing documentation and forms including but not limited to status updates on schedules, filling all required fields and signing work orders, scrap and defect tags.Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washingtonp/>The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Local CDL A Driver - Home Daily, 1st Shift GXO Government Services, LLCLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers.Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : Associate Degree Required experience : More than 5 years Professional status : Supervisory staff Spoken language(s) : English Fluent Salary range : USD 57,620 - 90,550 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewTool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Bagger Operator 1st Shift Safran SABagger Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Material Handler - 1st Shift GXO Government Services, LLCMaterial Handler - 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.Account Manager - 1st Shift GXO Government Services, LLCAccount Manager - 1st ShiftEverett, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.NewAssembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewStaff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAli>Analyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.NewTool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).NewAssembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** YesKit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWA$23–$29 / hourp>RESPONSIBILITIES: • Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.Local CDL A Driver - Home Daily, 1st Shift GXO Logistics IncLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAli>Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.1234Resume ResourcesFree Resume TemplatesFree Resume Builder
Insurance Agent - Bellevue, WA American Family InsuranceInsurance Agent - Bellevue, WABellevue, WAApply today.At American Family, we're seeking highly motivated individuals with a demonstrated track record of success and eagerness to accomplish something that takes time, energy, and commitment. From our CEO to our agency force, we’re committed to growing a diverse and inclusive culture that empowers innovation that will inspire, protect, and restore our customers’ dreams in ways never imagined.Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourli>This position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hourProduction Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Andrew Neighbors + Phone 425-259-9258 Ext 211 + Email andrewn@royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.SHIPPING AND RECEIVING (1st SHIFT) Royell Manufacturing, Inc.SHIPPING AND RECEIVING (1st SHIFT)Everett, WA$21–$25 / hourInventory Control/Picking + Place completed orders/inventory into pre-existing locations in stores + Locate and accurately pull stock required for shipping from stores locations + Maintain accurate stock locations and packaging + Pick orders for Assembly jobs and shipping kits + Perform stock checks and cycle counts as required Receiving + Validate incoming shipments against packing slips and perform initial receiving transactions (MOD) + Inspect incoming parts from finish operations, ensuring correct finish is applied, masking was done per drawing, finishes applied and documented on certification paperwork matches our PO requirements, and part counts match. Shipping + Pick parts per an assigned shipping schedule and package for shipping + Validate part numbers, part quantity, and shipping requirements to ensure the correct parts are delivered, on time and in the right quantity + Package adequately to protect parts during transit + Produce required packing slips, Advanced Shipment Notification, and carrier labels + Organize outgoing shipments for carrier pickup Traceability and accountability + Completes all manufacturing documentation and forms including but not limited to status updates on schedules, filling all required fields and signing work orders, scrap and defect tags.Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washingtonp/>The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Local CDL A Driver - Home Daily, 1st Shift GXO Government Services, LLCLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers.Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : Associate Degree Required experience : More than 5 years Professional status : Supervisory staff Spoken language(s) : English Fluent Salary range : USD 57,620 - 90,550 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewTool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Bagger Operator 1st Shift Safran SABagger Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.Material Handler - 1st Shift GXO Government Services, LLCMaterial Handler - 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.Account Manager - 1st Shift GXO Government Services, LLCAccount Manager - 1st ShiftEverett, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.NewAssembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.NewStaff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAli>Analyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.NewTool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).NewAssembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** YesKit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWA$23–$29 / hourp>RESPONSIBILITIES: • Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.Local CDL A Driver - Home Daily, 1st Shift GXO Logistics IncLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAli>Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.1234Resume ResourcesFree Resume TemplatesFree Resume Builder
Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:
Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Senior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WA Providence St. Joseph HealthSenior Claims Specialist / Insurance Follow-Up - Physicians Billing (REMOTE - WASeattle, WARemoteFull timeIt is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.
Senior Claims Counsel - Title Insurance (Remote) First American Title Insurance CompanySenior Claims Counsel - Title Insurance (Remote)Seattle, WARemote$129,300–$172,300 / yearFull timeThe Senior Claims Counsel position with First American Title Insurance Company provides an excellent opportunity for counsel to engage in complex legal analysis, craft creative solutions to difficult problems, manage their own caseload, oversee outside litigation counsel, and engage in high-level problem solving, negotiation and legal analysis in a stimulating and collegial environment with an opportunity for long-term growth and advancement. First American reasonably believes that a criminal history may have a direct, adverse and negative relationship with the following material job duties for this position potentially resulting in the withdrawal of the conditional offer of employment: handling of confidential, proprietary or trade secret information belonging to First American or its customers, administrating or facilitating financial transactions, and the ability to meet customer-imposed criminal history requirements.
Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.
Manufacturing Technician D - 1st Shift 1 L3Harris Technologies IncManufacturing Technician D - 1st Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Forklift Material Handler (1st Shift | Full Time) Cascade Coffee, Inc.Forklift Material Handler (1st Shift | Full Time)Everett, WA$21.50–$22.50 / hourli>This position requires work in a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust strong odors. Operate reach lifts and sit-down/stand-up forklifts to place pallets in assigned racking locations.
Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour
Production Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour
ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Andrew Neighbors + Phone 425-259-9258 Ext 211 + Email andrewn@royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.
CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.
SHIPPING AND RECEIVING (1st SHIFT) Royell Manufacturing, Inc.SHIPPING AND RECEIVING (1st SHIFT)Everett, WA$21–$25 / hourInventory Control/Picking + Place completed orders/inventory into pre-existing locations in stores + Locate and accurately pull stock required for shipping from stores locations + Maintain accurate stock locations and packaging + Pick orders for Assembly jobs and shipping kits + Perform stock checks and cycle counts as required Receiving + Validate incoming shipments against packing slips and perform initial receiving transactions (MOD) + Inspect incoming parts from finish operations, ensuring correct finish is applied, masking was done per drawing, finishes applied and documented on certification paperwork matches our PO requirements, and part counts match. Shipping + Pick parts per an assigned shipping schedule and package for shipping + Validate part numbers, part quantity, and shipping requirements to ensure the correct parts are delivered, on time and in the right quantity + Package adequately to protect parts during transit + Produce required packing slips, Advanced Shipment Notification, and carrier labels + Organize outgoing shipments for carrier pickup Traceability and accountability + Completes all manufacturing documentation and forms including but not limited to status updates on schedules, filling all required fields and signing work orders, scrap and defect tags.
Integration & Test Specialist (Starlink Propulsion) - 1st Shift SpaceXIntegration & Test Specialist (Starlink Propulsion) - 1st ShiftRedmond, WA$34–$40 / hourNX, SolidWorks, CATIA, or Autodesk Inventor) for design, modeling, and manufacturing applications ADDITIONAL REQUIREMENTS: + This is a 1st shift role working from 6:00 AM - 4:30 PM + Must be willing to work all shifts, overtime, and/or weekends as needed + Must be able to lift and carry up to 25 pounds + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay range: Level 1: $34.00 - $40.00/hour Level 2: $38.00 - $45.00/hour Level 3: $42.00 - $51.00/hour + Aid in efforts to uncover root-cause of equipment failures and develop permanent resolution on issues found during test operations (via software updates, hardware changes, etc.) + Execute and manage new configuration introduction into production area + Design and implement assembly fixtures, tooling, and shop aids to improve manufacturing processes + Identify and implement changes to design, process, safety, and floor layout to improve yield, performance, and cost.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washingtonp/>The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Local CDL A Driver - Home Daily, 1st Shift GXO Government Services, LLCLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers.
Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : Associate Degree Required experience : More than 5 years Professional status : Supervisory staff Spoken language(s) : English Fluent Salary range : USD 57,620 - 90,550 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
NewTool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Press Operator 1st Shift Safran SAPress Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 35,640.00 - 51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Bagger Operator 1st Shift Safran SABagger Operator 1st ShiftMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD 17.13/hr - 24.57/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Sealant Operator 1st Shift - SCI Safran SASealant Operator 1st Shift - SCIMarysville, WA$35,640–$51,100 / yearCompany : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $35,640.00 - $51,100.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Material Handler - 1st Shift GXO Government Services, LLCMaterial Handler - 1st ShiftDes Moines, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.
Account Manager - 1st Shift GXO Government Services, LLCAccount Manager - 1st ShiftEverett, WAFull timeOur greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.
NewAssembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourp>Company : Safran Cabin Job field : Manufacture / assembly and repair Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $17.13 - $24.57 Hourly ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
NewStaff Tech, Field Support Technician (1st Shift) RTX CorpStaff Tech, Field Support Technician (1st Shift)Everett, WAli>Analyze and physically check wiring, operation of various electronic units, and systems components necessary to troubleshoot malfunctions during testing of components, equipment, or systems. At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems.
NewTool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.
Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).
NewAssembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Kit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.
Material Handler - 1st Shift PPG Industries IncMaterial Handler - 1st ShiftSeattle, WAAccordingly, all applicants will be required to provide one of the following forms of identification as part of their application: (1) Passport, (2) Birth Certificate, (3) Certificate of Naturalization (USCIS Form N-550 or N-570), or (4) Permanent Resident Card (USCIS Form I-551. Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company.
Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWA$23–$29 / hourp>RESPONSIBILITIES: • Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes • Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices • Responsible for troubleshooting • Responsible for completing machining operations from blueprints, drawings and/or verbal instructions • Responsible for working with complex, tight tolerance parts and various materials. unassisted Ability to stand for extended periods - 8 hours min Ability to stoop, bend, crawl, and being able to maneuver in tight spaces Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting.
Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.
Local CDL A Driver - Home Daily, 1st Shift GXO Logistics IncLocal CDL A Driver - Home Daily, 1st ShiftDes Moines, WAli>Conduct thorough and accurate pre-trip and post-trip inspections and provide documentation upon completion; ensure proper closure of trailers. Our greatest strength is our global team - energetic, innovative people of all experience levels and talents who make GXO a great place to work.