NewEyelet Toolmaker (1st & 2nd shifts) JobotEyelet Toolmaker (1st & 2nd shifts)Waterbury, CT$29–$48 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. The Toolmaker is responsible for building, maintaining, troubleshooting, and repairing precision tooling used in high‑volume manufacturing of consumer battery components.
Water Pollution Control Operator 1, 40 Hour Work Week, Work Schedule TBD Dependent on Operating Needs: 1st Shift Sunday - Thursday OR 1st Shift Tuesday - Saturday; 1 Position University of ConnecticutWater Pollution Control Operator 1, 40 Hour Work Week, Work Schedule TBD Dependent on Operating Needs: 1st Shift Sunday - Thursday OR 1st Shift Tuesday - Saturday; 1 PositionStorrs, CT$68,180–$87,657 / yearNOTE: DEEP Regulations for Class I Wastewater Treatment Facility Operator Certification requires: (A) Satisfactory evidence of (i) at least one year of experience in the operation of a wastewater treatment facility of Class I or higher; (ii) a high school diploma or G.E.D. and (iii) successful completion of a basic wastewater treatment facility operation course, approved by the commissioner, equaling at least nine CEU's; and (B) pass the Class I examination. If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, and to indicate the (in person and/or online) course(s) studies, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned.
NewProduction Line Worker (1st Shift Mon - Fri 5am - 1:30pm) Strategic MaterialsProduction Line Worker (1st Shift Mon - Fri 5am - 1:30pm)South Windsor, ConnecticutAs a Production Line Worker , your responsibilities will include but are not limited to: Sort and process materials on a production line (may require standing for extended periods). We’re looking for a Production Line Worker to join our team and help keep our operations running smoothly and safely.
Maintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) University of ConnecticutMaintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)Storrs, CT$74,028–$96,813 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in the HVACR trade, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Position Department Search # Location Closes Maintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) FO Mechanical and Plumbng Svcs (FO Trade Services) (FO Energy and Trade Services) 499656 UConn Storrs Jul 20 2026 University of Connecticut's Facilities Operations Department, has one job opening for a Maintenance Supervisor 1 - HVACR position at the Storrs Campus.
Assembler 1st Shift Belcan LLCAssembler 1st ShiftCT$24–$28 / hourYour Challenge: Perform skilled bench work to bring complex parts with tight tolerance to customer specifications by deburring, blending, sanding with hand tools and machinery, and adjusting parts, as needed, prior to inspection. Employment Benefits: In addition to annual compensation, a comprehensive employee benefits package is provided, which includes, but is not limited to the following: 2 weeks of vacation and available days of Floating Holiday annually in accordance with policy, prorated from date of employment.
CNC Milling Machinist 1st Shift Belcan LLCCNC Milling Machinist 1st ShiftCT$24–$37 / hourRole & Responsibilities: Perform complex set ups, edits and operate established and NPI jobs with minimal supervision ensuring parts conform to specifications and requirements. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed.
Phlebotomist Floater - 1st Shift GTT, LLCPhlebotomist Floater - 1st ShiftMiddletown, CTIn addition, these practices require a higher level of customer-facing skills including verbal and written communications, problem solving, and collaboration with multiple functions, such as: Sales, Laboratory Testing Services, IT connectivity, Billing, and Logistics due to their specialty and/or complex test orders. This client is a leading provider of diagnostic information services in the healthcare industry, serving one in three adult Americans annually and supporting half of the physicians and hospitals across the United States, with laboratory operations extending internationally.
Phlebotomist Floater - 1st Shift GTTPhlebotomist Floater - 1st ShiftBristol, CTThis position provides coverage across multiple sites and roles, ensuring daily operations within Patient Service Centers, mobile settings, long-term care facilities, in-office practices, and house call environments are completed accurately and on time. Job DescriptionThe Phlebotomist III – Float serves as the face of the organization, interacting directly with patients as part of their routine care or life-defining health decisions.
CNC Milling Machinist (1st Shift) BelcanCNC Milling Machinist (1st Shift)East Granby, CT$24–$37 / hourJob Title: CNC Milling Machinist (1st Shift) Locations: East Granby, CT (CT South) Pay: $24 - $37 (DoE) - Full Benefits Package Provided Zip Code: 06026 Start Date: ASAP Schedule: 1st Shift: 7:00am - 3:30pm, Mon-Fri Type: Full-Time/Permanent Position Position Details: 1st shift (7:00am - 3:30pm) Experience & Skill Requirements: - 3 to 5 years of experience machining in an aerospace environment - 3+ years of experience setting up and operating CNC Devlieg Milling Machines - Needs to be familiar with Fanuc controls; willing to cross train on various operations/equipment - Strong mathematical skills and knowledge of GD&T - Familiar with Statistical Process Control (SPC) - Willing to learn basic CNC Programming Role & Responsibilities: - Perform complex set ups, edits and operate established and NPI jobs with minimal supervision ensuring parts conform to specifications and requirements. Person' (which includes U.S. citizens, U.S. nationals, U.S. lawful permanent residents, and those granted U.S. asylum or refugee status) Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises.
In-Process Inspector / Process Auditor | 1st Shift IDEXIn-Process Inspector / Process Auditor | 1st ShiftFarmington, CTAssociate’s degree in Mechanical Engineering, Industrial Engineering, or related field (preferred) + Experience in manufacturing inspection, quality assurance, or similar technical role + Ability to read and interpret engineering drawings and technical specifications + Working knowledge of ISO-based quality systems + Proficiency with common inspection tools and measurement equipment + Understanding of measurement systems, uncertainty, and inspection bias + Familiarity with basic data analysis, trending, and SPC concepts + Strong documentation and record-keeping discipline + Ability to operate effectively in a fast-paced production environment . + Results-driven with a strong sense of ownership and accountability + Eager to learn and develop within quality and process auditing disciplines + Detail-oriented with a high level of accuracy and consistency + Analytical thinker with a proactive, problem-solving mindset + Collaborative team player who works effectively with operators and cross-functional teams + Organized and capable of managing multiple priorities with guidance + Strong follow-through on tasks, actions, and commitments + Comfortable working in a regulated, cleanroom manufacturing environment .
In-Process Inspector Process Auditor | 1st Shift IDEX CorpIn-Process Inspector Process Auditor | 1st ShiftFarmington, CTWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses ( https://www.idexcorp.com/our-businesses/business-segments/ ) around the globe, chances are, we have something special for you. Over time, the role expands in scope to include process validation, control verification, and continuous improvement initiatives that directly impact product quality and operational excellence.
HVAC Technician- 1st Shift AramarkHVAC Technician- 1st ShiftWest Hartford, CT$30–$45 / hourThe ideal candidate will have hands-on experience with commercial HVAC systems, preventative maintenance programs, emergency repairs, and mechanical troubleshooting in institutional, commercial, healthcare, industrial, or campus environments. Installs, inspects, tests, operates, and repairs all refrigeration and related equipment for preserving food, making ice, cooling water, air conditioning, heating, and ventilation.
NewQuality Inspector (1st Shift) MB Aerospace East GranbyQuality Inspector (1st Shift)East Granby, CTPart timeIf the position for which you applied involves access to controlled information or technology subject to U.S. export control laws, then any offer is also contingent on verification of appropriate documentation for the Company to assess whether an export license will be required to employ you in that role, and if it is determined that an export license is required, the offer is also contingent on the Company’s determination, in its sole discretion, whether a license application and ongoing administration is prudent under the project’s contract parameters and whether an export license can be successfully obtained before you can start in that role. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
CNC VTL Machinist (1st Shift) BelcanCNC VTL Machinist (1st Shift)East Granby, CTZip Code: 06026Start Date: ASAPKeywords: #CNC VTL #MachinistJobsJob Description:- Perform complex set ups, edit and operate established and NPI jobs with minimal supervision ensuring parts conform to specifications and requirements. Willing to learn basic CNC Programming.- Excellent communication skills and problem-solving ability with demonstrated ability to work collaboratively to solve complex issues.-
Maintenance Mechanic - 1st Shift IDEX CorpMaintenance Mechanic - 1st ShiftFarmington, CT$69,200–$103,800 / yearWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses ( https://www.idexcorp.com/our-businesses/business-segments/ ) around the globe, chances are, we have something special for you. This hands‑on role supports preventive maintenance, equipment rebuilds, and continuous improvement initiatives while serving as a role model within the maintenance team and a key partner to production and support functions across the organization.
New1st & 2nd Shift Tool & Die Makers Venteon1st & 2nd Shift Tool & Die MakersFarmington, CTIf you are a high performer and would like to work for an equally high performing company and you think the above opportunity is appropriate for you, we invite you to submit your resume in Microsoft Word format to abarry@venteon.com. At Venteon our talent acquisition team is proud to provide our clients with the most qualified Accounting & Finance, Engineering, IT and Administrative talent in the industry today.
Medical Waste Non CDL Driver - 1st Shift 5AM to 3PM Daniels Sharpsmart IncMedical Waste Non CDL Driver - 1st Shift 5AM to 3PMEast Hartford, CTOur focus is delivering quality and safety-focused medical waste management services that reduce needlestick injuries, improve infection control and reduce the environmental footprint of our customers. As a service to our customers we dispose and treat medical waste at our treatment facilities across the U.S. If this sounds like the role for you, or somebody you know then we look forward to speaking with you!
Manufacturing Group Lead - 1st Shift ASML Holding NVManufacturing Group Lead - 1st ShiftWilton, CTCOLLABORATES WITH: Group Leaders, Team Leads, Production Engineering, Program Managers, Planning, Clean Room Logistics, Shipping and Delivery, Environmental Health & Safety, Quality Engineering, Operational Excellence, Design & Engineering, and Customer Support. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.
Assembler, 1st Shift BelcanAssembler, 1st ShiftEast Granby, CT$24–$28 / hourSchedule and organize time and tasks effectively Your Challenge: * Perform skilled bench work to bring complex parts with tight tolerance to customer specifications by deburring, blending, sanding with hand tools and machinery, and adjusting parts, as needed, prior to inspection. * Use and interpret complicated prints, drawings and process sheets to perform a variety of layouts, as well as complete and sign work orders identifying the operations performed Education Requirements: High school diploma or equivalent required.
Manufacturing Set-Up Mechanic 1st and 2nd shift Sheffield PharmaceuticalsManufacturing Set-Up Mechanic 1st and 2nd shiftNew London, CTFull timeAt least 1 year of work experience in machine set-up and operation of production equipment preferred but will train those with proven mechanical aptitude such as experience with small engine repair (ie: auto mechanic) or trade school graduates. At Sheffield Pharmaceuticals, the home of the original Sheffield Toothpaste, we offer exclusive, quality, branded products to promote wellness and relief to our customers.
Receiving Inspector (1st Shift) BelcanReceiving Inspector (1st Shift)East Granby, CT$25–$35 / hourYour Challenge:* Incoming inspection of castings, forgings, raw material, and semi-finished/ finished aerospace components,* Sample inspect parts for conformance and review supplier certificates and test reports for conformance.* Inspection includes visual and dimensional using required gaging and measuring equipment* Interpret operation sheets and blueprints meet customer criteria for an acceptable part* Ensure that all parts being inspected meet criteria for an acceptable part* If a part is defective or needs re-work, Inspector must complete required paperwork associated with this task Education Requirements: High School Diploma, GED or equivalent is requiredEmployment Benefits: In addition to annual compensation, a comprehensive employee benefits package is provided, which includes, but is not limited to the following: * 2 weeks of vacation and available days of Floating Holiday annually in accordance with policy, prorated from date of employment. Your Expertise:* 2+ years of inspection experience in an aerospace environment* Previous experience performing dimensional and visual inspection in an aerospace environment* Ability to read, analyze, and interpret technical documents, blueprints, and customer specifications* Must have working knowledge of geometric tolerancing, gages, micrometers, borescopes and other measuring tools* A strong background in manufacturing and the ability to multitask in a fast-paced, dynamic environment is required* Previous experience performing incoming inspection in an aerospace environment (Highly desirable)* Experience reviewing supplier certification paperwork for conformance including, but not limited to, validating material properties, dimensional results, and compliance to customer specifications.*
Precision Assembly Technician (1st shift) AMETEK IncPrecision Assembly Technician (1st shift)CTFor over 50 years, Zygo Corporation in Middlefield, CT has been a global leader in designing and manufacturing advanced optical metrology systems, ultra-precise optical components, and complex electro-optical systems and assemblies. KEY RESPONSIBILITIES: Perform functional and optical precision assembly, alignment, and testing of Profiler Instruments and respective subassemblies, kits, and objectives using precision metrology tools, fixtures, and software.
Optical Assembly Technician (1st shift) AMETEK IncOptical Assembly Technician (1st shift)CTFor over 50 years, Zygo Corporation in Middlefield, CT, has been a global leader in designing and manufacturing advanced optical metrology systems, ultra-precise optical components, and complex electro-optical systems and assemblies. KEY RESPONSIBILITIES: Perform functional and optical testing of annealing lasers diodes, low orbit space telescopes, and specialized optical assemblies using precision metrology tools.
Electrical Assembler (1st shift) AMETEK IncElectrical Assembler (1st shift)CTFor over 50 years, Zygo Corporation in Middlefield, CT, has been a global leader in designing and manufacturing advanced optical metrology systems, ultra-precise optical components, and complex electro-optical systems and assemblies. Document work performed with extreme attention to detail, maintaining traceability of components and assemblies, and timely completion of production and service work orders.
Quality Inspector (1st Shift) Barnes Group IncQuality Inspector (1st Shift)CTIf the position for which you applied involves access to controlled information or technology subject to U.S. export control laws, then any offer is also contingent on verification of appropriate documentation for the Company to assess whether an export license will be required to employ you in that role, and if it is determined that an export license is required, the offer is also contingent on the Company's determination, in its sole discretion, whether a license application and ongoing administration is prudent under the project's contract parameters and whether an export license can be successfully obtained before you can start in that role. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Maintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) University of ConnecticutMaintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)Storrs, CT$81,113–$105,907 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in Plumbing and Heating, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Position Department Search # Location Closes Maintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) FO Mechanical and Plumbng Svcs (FO Trade Services) (FO Energy and Trade Services) 499655 UConn Storrs Jul 20 2026 University of Connecticut's Facilities Operations Department, has one job opening for a Maintenance Supervisor 2 - Plumbing position at the Storrs Campus.
Maintenance Supervisor 2 - Utilities, 1st Shift Monday - Friday, 7:00 a.m. - 3:00 p.m. (one position) University of ConnecticutMaintenance Supervisor 2 - Utilities, 1st Shift Monday - Friday, 7:00 a.m. - 3:00 p.m. (one position)Storrs, CT$79,134–$103,323 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in Plumbing and Heating, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Experience serving in a leadership capacity that includes demonstrated experience in the supervision of employees serving in a wide range of skilled job classifications such as Student Labor Apprentices, Skilled Trades Apprentices and Quality Craft Workers (QCWs).
Residential Re-Entry Specialist (PT 16 hrs, 1st Shift) Community Solutions IncResidential Re-Entry Specialist (PT 16 hrs, 1st Shift)CTCommunity Solutions Inc. (CSI) is a nonprofit organization that promotes the responsible citizenship, accountability, and well-being of individuals and families involved, or at risk of involvement, in the child welfare, juvenile justice, or criminal justice system. Random breathalyzer or urinalysis, cognitive behavioral groups, home confinement monitoring, and case management to assist clients in maintaining stability leading to successful discharge.
NewAssembly Technician C (1st shift 4x10 Mon-Thurs 4:42am - 3:12pm) RTX CorpAssembly Technician C (1st shift 4x10 Mon-Thurs 4:42am - 3:12pm)Middletown, CTWhat You Will Do: Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Qualifications You Must Have: High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.
1st Shift Seasonal Material Handler - $20/hour Campbell's1st Shift Seasonal Material Handler - $20/hourBloomfield, ConnecticutOur portfolio includes the iconic Campbell’s brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao’s Homemade, Snack Factory, Snyder’s of Hanover. He/She will have job responsibilities of picking orders, unloading and loading trucks, organizing the shipping floor, taking daily inventories and keeping accurate counts.
Foundry Equipment Operator - 1st Shift (onsite) RTXFoundry Equipment Operator - 1st Shift (onsite)East Hartford, ConnecticutIn compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Production Operator - 1st Shift Compagnie de Saint-GobainProduction Operator - 1st ShiftOrange, CTThey allow access to information such as the characteristics of your terminal or certain personal data (IP addresses, navigation data on the Saint-Gobain site, etc.) for the following purposes: analysis and improvement of the user experience and/or our offer of content, products and services; audience measurement and analysis; interactions with social networks; display of advertising and personalized content. Country Royaume-Uni Italie Pologne Espagne Middle East Portugal Romania Pérou Argentine Chili Switzerland Germany Austria Finland Danemark Brazil.
Experienced Production Associate - 1st Shift J.B. Poindexter & Co., Inc.Experienced Production Associate - 1st ShiftPlainfield, CTAs an Experienced Production Associate, you'll be hands-on in assembling full truck bodies-bringing strength, precision, and pride to every build. In this hands-on role, youll be on your feet-standing for extended periods, walking, and using your hands to operate tools and equipment with precision.
NewDecaler - 1st Shift J.B. Poindexter & Co., Inc.Decaler - 1st ShiftPlainfield, CTThe team member frequently is required to stand (sometimes for extended periods); walk; use hands to finger, handle or feel; and reach with hands and arms, and lift up to 35 pounds. Meet physical requirements which include lifting up to 50lbs, standing for long periods, bending, stooping, reaching and squatting.
QC Inspector - 1st Shift J.B. Poindexter & Co., Inc.QC Inspector - 1st ShiftPlainfield, CTIn this hands-on role, youll be on your feet-standing for extended periods, walking, and using your hands to operate tools and equipment with precision. What a Day in Your Life Looks Like: Inspect and verify every unit against sales agreements and Morgan's precise engineering drawings and specs.
NewExperienced Automotive Painter - 1st Shift J.B. Poindexter & Co., Inc.Experienced Automotive Painter - 1st ShiftPlainfield, CTAs an Automotive Painter, you'll be hands-on in transforming raw builds into road-ready machines, applying high-quality finishes that meet exact customer specs. In this hands-on role, youll be on your feet-standing for extended periods, walking, and using your hands to operate tools and equipment with precision.
Manufacturing Group Lead - 1st Shift ASMLManufacturing Group Lead - 1st ShiftWilton, ConnecticutCOLLABORATES WITH: Group Leaders, Team Leads, Production Engineering, Program Managers, Planning, Clean Room Logistics, Shipping and Delivery, Environmental Health & Safety, Quality Engineering, Operational Excellence, Design & Engineering, and Customer Support. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world’s leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.
NewStaffing Coordinator, 40 hours, 1st Shift, and Patient Staffing Department Day Kimball Healthcare IncStaffing Coordinator, 40 hours, 1st Shift, and Patient Staffing DepartmentCTToday, our team of over 1,100 dedicated employees - including more than 300 skilled physicians, surgeons, and specialists - proudly deliver a full continuum of care, from primary and specialty services to homecare and hospice, meeting the evolving needs of our patients at every stage of life. Initiates, coordinates and monitors staffing schedules in relation to patient/unit activity and each unit's budget in an effort to provide cost‑effective staffing for all nursing departments.
Quality Technician - 1st shift VishayQuality Technician - 1st shiftEast Windsor, ConnecticutVishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals.
Scheduling Assistant (Temporary), 15 hours, Part Time, 1st Shift and Patient Staffing Department Day Kimball Healthcare IncScheduling Assistant (Temporary), 15 hours, Part Time, 1st Shift and Patient Staffing DepartmentCTScheduling Assistant Summary: As the Scheduling Assistant, you will be a vital member of a dynamic team responsible for… The Patient Staffing Assistant provides administrative and scheduling support to the Patient Staffing Office by coordinating staffing coverage, communicating with clinical staff and department leadership, maintaining scheduling records, supporting timekeeping processes, and assisting with workforce scheduling activities. Today, our team of over 1,100 dedicated employees - including more than 300 skilled physicians, surgeons, and specialists - proudly deliver a full continuum of care, from primary and specialty services to homecare and hospice, meeting the evolving needs of our patients at every stage of life.
NewStaffing Coordinator, 40 hours, 1st Shift, and Patient Staffing Department Day Kimball HealthStaffing Coordinator, 40 hours, 1st Shift, and Patient Staffing DepartmentConnecticutToday, our team of over 1,100 dedicated employees - including more than 300 skilled physicians, surgeons, and specialists - proudly deliver a full continuum of care, from primary and specialty services to homecare and hospice, meeting the evolving needs of our patients at every stage of life. Initiates, coordinates and monitors staffing schedules in relation to patient/unit activity and each unit's budget in an effort to provide cost‑effective staffing for all nursing departments.
Quality Technician - 1st shift Vishay Intertechnology IncQuality Technician - 1st shiftCTVishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. What can we offer you for your talent: Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals.
Scheduling Assistant (Temporary), 15 hours, Part Time, 1st Shift and Patient Staffing Department Day Kimball HealthScheduling Assistant (Temporary), 15 hours, Part Time, 1st Shift and Patient Staffing DepartmentConnecticutScheduling Assistant Summary: As the Scheduling Assistant , you will be a vital member of a dynamic team responsible for… The Patient Staffing Assistant provides administrative and scheduling support to the Patient Staffing Office by coordinating staffing coverage, communicating with clinical staff and department leadership, maintaining scheduling records, supporting timekeeping processes, and assisting with workforce scheduling activities. Today, our team of over 1,100 dedicated employees - including more than 300 skilled physicians, surgeons, and specialists - proudly deliver a full continuum of care, from primary and specialty services to homecare and hospice, meeting the evolving needs of our patients at every stage of life.
Perioperative Material Coordinator, 40 Hours, 1st Shift and Material Management Department Day Kimball HealthPerioperative Material Coordinator, 40 Hours, 1st Shift and Material Management DepartmentConnecticutPerioperative Material Coordinator Summary: As the Perioperative Material Coordinator , you will be a vital member of a dynamic team responsible for… Under the general supervision of the Supply Chain Director with a dotted reporting line to Perioperative Nursing Leadership, the Perioperative Materials Coordinator is responsible for coordinating perioperative supply chain operations to support efficient clinical operations, procedural readiness, inventory optimization, and product availability across designated perioperative departments, including ACU, Wound Clinic, and Central Sterile Processing. Today, our team of over 1,100 dedicated employees - including more than 300 skilled physicians, surgeons, and specialists - proudly deliver a full continuum of care, from primary and specialty services to homecare and hospice, meeting the evolving needs of our patients at every stage of life.
Production Associate - 1st shift Morgan Truck BodyProduction Associate - 1st shiftPlainfield, CTFull timeIn this hands-on role, you'll be on your feet-standing for extended periods, walking, and using your hands to operate tools and equipment with precision. As a Production Associate, you'll be hands-on in assembling full truck bodies - bringing strength, precision, and pride to every build.
Welder - 1st Shift Morgan Truck BodyWelder - 1st ShiftPlainfield, CTFull timeWelding Techniques & Certification: Expand your expertise by learning and applying multiple welding methods, earning certifications that set you apart as a true pro. Blueprint Interpretation: Master the art of reading and interpreting blueprints to weld metals with pinpoint precision delivering exactly what customers and the company demand.
IT Manager of End User Systems & Support Bigelow TeaIT Manager of End User Systems & SupportFairfield, ConnecticutIn addition to managing service desk and desktop support functions, the Technology Manager serves as an escalation point for more complex end-user issues and partners closely with infrastructure, security, and application teams to improve service quality, end-user experience, and support effectiveness. Leads the day-to-day activities of Bigelow Tea’s Information Technology (IT) End User Systems & Support which includes monitoring and managing desktop support, general IT service desk issues, and VIP support functions to ensure optimal service.
Business Systems Analyst, Sports IT TKOBusiness Systems Analyst, Sports ITStamford, ConnecticutThis role goes beyond traditional requirements gathering, the Business Systems Analyst will also serve as the day-to-day owner of the applications within the portfolio, acting as first line of support for stakeholders, partnering with IT Helpdesk, Cyber Security, and IT Audit on application operations, and driving initiatives to closure with strong project management discipline. •Hands-on experience as a project lead or scrum master delivering small projects or business enhancements using waterfall, agile, or hybrid methodologies including requirements and user story creation, backlog refinement, and statement of work definitions for vendor-delivered implementations.
IT Help Desk Professional Aero All-Gas Company TheIT Help Desk ProfessionalHartford, CTThese responsibilities include: Network installation and management Printer troubleshooting and maintenance MDM installation Crowdstrike EDR management Business phone management and onboarding Internet management Microsoft Administration and Microsoft 365 Suite Apple Business Manager Proprietary sites/applications General IT support Communication with IT vendors. As an "In House" IT operative working with office personnel, delivery drivers, and service technicians with technical questions/problems, it will be your responsibility to manage a variety of the company's technology to maintain uninterrupted workflow throughout the organization.
IT Systems Engineer - End-User Support (USA) Trexquant Investment LPIT Systems Engineer - End-User Support (USA)CTLead network troubleshooting across DNS, DHCP, VPN, and connectivity layers, with the ability to diagnose issues end-to-end across client, network, and infrastructure. Oversee peripheral (including Cameras infrastructure, printers, access devices etc.) and hardware ecosystems as part of a broader end-user experience strategy.