NewManufacturing Technician C - 1st Shift L3Harris TechnologiesManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewManufacturing Technician B - 1st Shift L3Harris TechnologiesManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue Origin LLCManufacturing Engineer II, III, Sr (Multiple Shifts) - LunarSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Aerospace Production - Laminator I - 1st Shift Sekisui AerospaceAerospace Production - Laminator I - 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Production - Kit Cutter I - 1st Shift Sekisui AerospaceAerospace Production - Kit Cutter I - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:
Laminator II - 1st Shift Sekisui AerospaceLaminator II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Laminator I- 1st Shift Sekisui AerospaceLaminator I- 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Trimmer I, 1st Shift Sekisui AerospaceTrimmer I, 1st ShiftBonney Lake, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Assembler II - 1st Shift Sekisui AerospaceAerospace Assembler II - 1st ShiftRenton, WAFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Aerospace Assembler I - 1st Shift Sekisui AerospaceAerospace Assembler I - 1st ShiftRenton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Assembler I, 1st Shift Sekisui AerospaceAssembler I, 1st ShiftBonney Lake, WA$22.25–$26.25 / hourFull timePay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to takt time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Polish Operator - 1st or 2nd Shift Hytek FinishesAerospace Polish Operator - 1st or 2nd ShiftWoodmont Beach, WAFull timel learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Lineperson-1st Shift Utz BrandsLineperson-1st ShiftAlgona, WAFull timeDuring the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of Utz Quality Foods is looking to grow our loyal, career driven, and customer focused team, and is currently recruiting for a Lineperson to work from our manufacturing facility located in Algona, WA on 1st Shift.
Packer - 1st Shift Utz BrandsPacker - 1st ShiftAlgona, WAFull timeDuring the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of UTZ Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for a Packer to work 1st Shift for our manufacturing facility in Algona, WA.
Manufacturing Technician C - 1st Shift L3HarrisManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourJob Title: Manufacturing Technician C Job Code: 38607 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .
Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Manufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pm SKILLS INCManufacturing Helper: 1st Shift, Monday-Friday 7:00am-3:30pmAuburn, WA$18–$21 / hourThe incumbent will identify, prioritize, and pull materials identified on manufacturing work orders; set up or assist in setting up machinery to proper dimensions specified on manufacturing work orders; ensure finished material is delivered to other work areas; and ensure work orders are filled out accurately. Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military-related technologies may only be accessed, viewed, or shared by US Persons as defined by law.
Manufacturing Technician B - 1st Shift L3Harris Technologies IncManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewManufacturing Test Technician II (1st shift), Amazon Leo Amazon.com IncManufacturing Test Technician II (1st shift), Amazon LeoKirkland, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Manufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCManufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$27–$42 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Solution orientated, able to define problems, collect data, establish facts and draw valid conclusions to solve a wide range of difficult problems in practice and cost effective ways.
Manufacturing Technician II (1st Shift), Solar Amazon Leo Amazon.com IncManufacturing Technician II (1st Shift), Solar Amazon LeoKirkland, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Manufacturing Technician D - 1st Shift L3Harris Technologies IncManufacturing Technician D - 1st ShiftRedmond, WAWith customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Manufacturing Technician C - 1st Shift L3Harris Technologies IncManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Manufacturing Technician D - 1st Shift L3HarrisManufacturing Technician D - 1st ShiftRedmond, WAJob Title: Manufacturing Technician D Job Code: 37677 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .
Manufacturing Technician B - 1st Shift L3HarrisManufacturing Technician B - 1st ShiftRedmond, WA$22.83–$42.54 / hourJob Title: Manufacturing Technician B Job Code: 38606 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .
NewAerospace Manufacturing Engineer Manager - 1st Shift, Amazon Leo Amazon.com IncAerospace Manufacturing Engineer Manager - 1st Shift, Amazon LeoKirkland, WAThe Aerospace Manufacturing Engineer Manager will start their day reviewing shift handoff reports, identifying any open production issues carried over from previous shifts, and prioritizing engineering support activities. This individual will manage a team of support engineers responsible for maintaining production continuity, resolving line blockers, and driving process improvements across solar array assembly, integration, and test flows.
Production Value Stream Manager - Aerospace Manufacturing Leadership Opportunity Hytek FinishesProduction Value Stream Manager - Aerospace Manufacturing Leadership OpportunityWoodmont Beach, WAFull timeIs skilled in monitoring and assessing the performance of self, other individuals, and teams to make improvements and take corrective action, creating a track record of successful leadership. The role is responsible for managing the direction of the Production team across all shifts and the full breadth of the Value Stream utilizing support from Production Leads and shift Production Supervisors.
CNC Machinist-Day Shift Primus International LLCCNC Machinist-Day ShiftTukwila, WAFull timeAt the highest level, they are capable of setting up and running all site-specific CNC and conventional machines, designing and manufacturing complex tooling, and mentoring junior machinists while contributing to continuous improvement initiatives. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
Sheet Metal Production - Day Shift Gensco, Inc.Sheet Metal Production - Day ShiftFife, WA$19.48–$21.63 / hourFull timeWe pride ourselves on delivering outstanding service and value to our customers and providing opportunity and job satisfaction for our 1,000+ Team Members throughout Washington, Oregon, Montana, Idaho, and Alaska. Gensco, a regional leader in sheet metal manufacturing, is looking for energetic Team Members to join our team in Tacoma, WA!
Sheet Metal Production - Swing Shift Gensco, Inc.Sheet Metal Production - Swing ShiftFife, WA$19.98–$22.13 / hourFull timeWe pride ourselves on delivering outstanding service and value to our customers and providing opportunity and job satisfaction for our 1,000+ Team Members throughout Washington, Oregon, Montana, Idaho, and Alaska. Gensco, a regional leader in sheet metal manufacturing, is looking for energetic Team Members to join our team in Tacoma, WA!
Aerospace Painter - 2nd Shift Hytek FinishesAerospace Painter - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 3rd Shift Hytek FinishesAerospace Painter - 3rd ShiftKent, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Cadmium Assistant - 3rd Shift Hytek FinishesAerospace Cadmium Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Zinc Nickel Assistant - 3rd Shift Hytek FinishesAerospace Zinc Nickel Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Titanium-Cadmium Assistant - 2nd Shift Hytek FinishesAerospace Titanium-Cadmium Assistant - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
CNC Machinist- Day Shift Primus International LLCCNC Machinist- Day ShiftTukwila, WAFull timeIn addition to production machining, this role may support prototyping and proto shop activities, requiring the ability to interpret raw engineering sketches or blueprints and fabricate functional components from scratch-often without established CNC programs or pre-set tooling. Demonstrate advanced manual lathe expertise, including independently setting up, operating, and troubleshooting manual machines for turning, facing, threading, and precision finishing.
Manufacturing Engineer Sr (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer Sr (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer III (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer III (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer II (Multiple Shifts) - Lunar Blue Origin Enterprises LPManufacturing Engineer II (Multiple Shifts) - LunarWA$91,852–$128,592.45 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewAdvanced Composites Manufacturing Lead - 2nd Shift Sekisui Chemical LtdAdvanced Composites Manufacturing Lead - 2nd ShiftRenton, WA$33.08–$37.48 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
NewAdvanced Composites Manufacturing Lead - Weekend Shift Sekisui Chemical LtdAdvanced Composites Manufacturing Lead - Weekend ShiftRenton, WA$30.25–$34.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Production Machinist (Starlink) - 1st Shift SpaceXProduction Machinist (Starlink) - 1st ShiftWoodinville, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour
Production Machinist (Starlink) - 1st Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour