UNKNOWN

FEED

is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

GBE Machining Team Lead - 1st Shift Weekend Country United States of America State / County South Carolina City Dillon Division Wyman Gordon Company Dillon Function Operations Workplace Type On-Site Position type Full Time Opportunity ID 21993 Job Description Duties and Responsibilities In addition to all the duties of the regular classification as a CNC Machinist, the GBE Machining Team Leader responsibilities will be, but not limited to: • Operate and set-up machines as requested and/or needed. • Direct the daily activities of Operators and Machinists, as requested by Supervisor or Manager. • Verify designated areas of responsibility continually meet the housekeeping and 5S standards. • Ensure employees are wearing the proper PPE and adhering to the safety requirements for the position. Identify and report unsafe conditions and behaviors to Supervisor or Manager. • Verify Machinists and Operators are working to a high standard of workmanship and machining best practice. • Verify employees are complying with company policy, including but not limited to allotted break times, staggering of breaks, personal cell phone use policy, etc. Elevate any non-compliance immediately to Supervisor or Manager. • Provide employee performance feedback to Supervisor or Manager as requested. • Perform training and/or monitor employee training and OJT completion status to ensure training is completed according to management expectations and timelines. • Assist in troubleshooting, identifying root cause, and implementing process corrective actions. Immediately elevate problem to Supervisor / Manager if outside of problem-solving scope. • Verify employees are following Quality and Machining procedures and producing conforming parts • Participate in creating and communicating efficient daily production schedules. • Monitor actual production compared to scheduled production and report any variances immediately according to escalation process. Verify causes for throughput below target are accurately documented and communicated. • Assist in identifying and communicating staffing needed to meet production requirements, and coordinate with team members to ensure adequate staffing coverage. Contact off duty employees for coverage according to policy, if necessary. • Conduct shift handoffs and startup meetings as requested. • When requested, ensure line walk boards are updated and accurately represent operating status and constraints. <ul><li>Works with engineering staff on 1st piece prove outs in the machine shop and current machining processes. Providing both feedback and support to not only improve machining efficiency but also improve quality </li><li>Other duties and responsibilities as assigned. </li><li>Team Leader performance will be evaluated based on his/her team's performance compared to goal. </li></ul>Working conditions • Constant exposure to indoor manufacturing environment. • Constant exposure to moderate noise. • Working conditions may include small spaces, dust, fumes/odors, and hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces. Physical Requirements • Must be able to lift and carry items weighing up to thirty-five (35) pounds on a repetitive basis. • Must be able to stand, walk, bend, squat climb, kneel, twist and work at heights on an intermittent basis for twelve hours a day. • Requires hand manipulation including simple grasping, power grasping, pushing and pulling of materials and fine manipulation. • Must be able to reach and work above and below the shoulder level is frequently performed on a continuous basis. • Must be able to operate a variety of material handling equipment such as industrial forklifts. • Must be able to work with and around forklifts and hazardous machinery. • Must be able to wear all required Personal Protective Equipment. • Working conditions may include small spaces, dust, fumes/odors, and hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces. Additional Requirements • Must be able to work scheduled shift Friday, Saturday, and Sunday. Ability to work holidays, weekends and overtime as scheduled. • Must have completed 90-day introductory period. • Must have been in current position for a minimum of six (6) months. • Must be Level 2 machinist or above. • Must be in good standing - no written or final level corrective actions. • Must be a prior machinist. • Prior experience as a team lead preferred. Skills • Good interpersonal skills. • Ability to work in a fast-paced environment. • Good time management skills. <ul><li>Basic computer skills such as Microsoft office. </li><li>Professional mannerisms with use of company phone. </li></ul> All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Precision Castparts

GBE Machining Team Lead - 1st Shift Weekend

Aerospace and Defense

Best Practices

CNC (Computerized Numerical Control) Systems

Cellular Telephone

Communication Skills

Computer Skills

Concrete

Corrective Action

Forklift

Housekeeping/Cleaning

Identify Issues

Import/Export

Lost-Wax Casting

Machining

Manufacturing

Microsoft Office

Oil and Gas

Performance Analysis

Performance Management

Physical Demands

Power Generation

Problem Solving Skills

Production Control

Production Schedule

Quality Management

Regulations

Resume Search

Root Cause Analysis

Safety Training

Schedule Development

Staff Requirements

Staff Training

Startup

Team Lead/Manager

Time Management

IRecruitee

Support Team Leaders with decision making in areas of process improvement and/or production to make appropriate resource decisions (manpower, machines, methods) to facilitate the flow of hardware through the manufacturing process . is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

Manufacturing Supervisor - COE 2nd Shift Country United States of America State / County South Carolina City Dillon Division Wyman Gordon Company Dillon Function Materials Workplace Type On-Site Position type Full Time Opportunity ID 21992 Job Description Duties and Responsibilities: <ul><li>Must be able to work Sunday - Monday 6pm to 6am. Will train on 1st shift for a period of 30-45 days. </li><li>Coordinate and provide technical, quality and production leadership to assigned team to meet quality, schedule, and cost goals </li></ul><ul><li>Provide ongoing support in scheduling resources, technical leadership and facilitating the flow of hardware to meet customer requirements </li><li>Support Team Leaders with decision making in areas of process improvement and/or production to make appropriate resource decisions (manpower, machines, methods) to facilitate the flow of hardware through the manufacturing process </li><li>Support process improvement initiatives to reduce cycle time, improve inventory turns and reduce manufacturing losses </li><li>Direct the activities of an hourly team within the department and participate in department activities to meet identified goals </li><li>Perform administrative duties to support the business, including timecards, labor vouchers, self-audits, absence reviews, missing time corrections, etc. </li><li>Coordinate all first line activities (i.e., Methods, Production Control) to assure the meeting of production schedules and customer satisfaction, cost goals, and maintaining the highest standards of quality </li><li>Coach and counsel team members regarding individual performance and development needs </li><li>Practice sound human relations and communications skills to motivate the work force </li><li>Review production orders and ensure production schedules are being met </li><li>Analyze and diagnose machine and tooling problems and takes corrective measures to minimize downtime and interruption of schedules </li><li>Achieve highest safety levels in the plant </li><li>Experience with implementing lean manufacturing improvements </li><li>Employ Six Sigma rigors to all functions within the department </li><li>Mentor and motivate team in safety, quality, and productivity improvements </li><li>Other duties as assigned </li></ul>Knowledge and Training: <ul><li>Bachelor's degree from an accredited university or college or a high school diploma/GED with at least 4 years of prior supervisor / leadership experience in a manufacturing environment </li><li>Bachelor's degree in Business or Engineering preferred </li><li>(Prior experience, in CNC Machining, Dimensional Inspection, and knowledge of precision measuring equipment) </li><li>Prior supervisory / leadership experience in manufacturing/ Prior machining leadership experience a plus </li><li>Ability to manage multiple priorities under tight deadlines and bring to successful completion </li><li>Strong team building / coaching skills </li><li>Knowledge of manufacturing operations and practices </li><li>Ability to interact with all levels of the organization </li><li>Ability to counsel and motivate team members </li><li>Strong attention to detail </li><li>Strong verbal and written communication skills </li><li>Strong negotiation skills and ability to lead, by example </li><li>Six Sigma training is preferred </li><li>Strong propensity for excelling in a demanding environment </li><li>Must be able to support a 24/7 operation. </li><li>Must have the ability to train on first shift (if applicable) along with supporting other shifts for coverage purposes as needed. </li></ul>Physical requirements: <ul><li>Must be able to wear all required Personal Protective Equipment </li><li>Must be able to lift 35 lbs. when needed </li></ul><ul><li>Constantly stand and walk throughout the workday </li></ul><ul><li>It is required to stand, walk & reach with hands & arms </li><li>Good coordination to operate several controls simultaneously </li><li>Heavy visual concentration required to reach precision measuring instruments and to observe cutting operations </li><li>Frequent use of physical skills to operate a wide variety of machines & tools working to close tolerances </li><li>Has use of electric cranes & hoists for lifting & moving forgings </li><li>Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus </li></ul><ul><li>Frequently reach with hands and arms; use hands to manipulate, handle, or feel material </li><li>Constant use hands/fingers to grasp, pinch, pull, feel, or handle and manipulate parts and tools </li><li>Frequent repetitive motions </li><li>Constant requirement of specific vision abilities including close vision, distance vision, color vision, depth perception, and ability to focus </li><li>Constantly wear eye protection (Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required) </li></ul> All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Manufacturing Supervisor - COE 2nd Shift

Administrative Skills

Analysis Skills

Business Support

Coaching

Crane

Customer Satisfaction

Depth Perception

Detail Oriented

High School Diploma

Industry Standards

Inventory Turns

Leadership

Lean Manufacturing

Lift/Move 35 Pounds

Machine Tool

Manufacturing Management

Manufacturing Operations

Manufacturing/Industrial Processes

Mentoring

Multitasking

Negotiation Skills

Organizational Skills

People Management

Presentation/Verbal Skills

Process Improvement

Productivity Management

Safety Equipment

Safety Standards

Safety/Work Safety

Set Goals

Six Sigma

Technical Leadership

Training/Teaching

Writing Skills

Ability to bend at the waist, kneel, climb stairs, reach in all directions, fully use both hands and legs, possess good finger dexterity, perform repetitive motions with hands, wrists, elbows, and shoulders. A Security Officer is responsible for protecting and serving MUSC Health Pee Dee Division patients, staff, and visitors, in addition to monitoring and protecting facilities and assets, across the Pee Dee Division.

Job Description SummaryMUSC/Marion, SC, MUSC/Florence, SC and MUSC/Black River Medical Center now seeking experienced Security Officer on a PRN basis!EntityMedical University Hospital Authority (MUHA)Worker TypeEmployeeWorker Sub-Type​PRNCost CenterCC001294 FLO - Security (FMC)Pay Rate TypeHourlyPay GradeHealth-21Scheduled Weekly Hours8Work ShiftJob DescriptionA Security Officer is responsible for protecting and serving MUSC Health Pee Dee Division patients, staff, and visitors, in addition to monitoring and protecting facilities and assets, across the Pee Dee Division. Security Officers monitor and operate access control systems, security camera systems, intercoms, two-way radios, telephones, and alarm systems.Security Officers often perform the following duties daily:Patrol facilities and grounds,Provide emergency assistance and response,Interact with patients, families, visitors, law enforcement and correctional officers.Support MUSC Health staff with issues involving security and safety concerns.The individual must complete detailed notes based on observations, conduct security investigations and interviews, and write detailed reports regarding incidents and events.Education:Education Minimum High School Diploma or equivalent.  Work Experience:Minimum One (1) year relevant experience or appropriate preferred education requirements.Preferred Experience in healthcare security, corporate security, or law enforcement.Licenses & Certifications Minimum Valid driver’s license in the State of SC.  Completion of IAHSS Basic Certification within six (6) months of hire. PreferredAdditional Job DescriptionRequired Skills, Knowledge, and Abilities Ability to maintain a high level of professionalism.Must possess a strong desire and ability to provide a high level of customer service through engagement with others.Ability to don and wear personal protective equipment, such as gloves, face shields, goggles, gowns, masks, powered air-purifying respirator, and if necessary, issued ballistic vest protection while on duty.Ability to use radio equipment for communications.Ability to quickly respond to emergent situations.Skill in verbal communications, especially listening and recalling information during high stress conditions.Skill in written communications including the ability to type accurate and detailed reports efficiently, recalling actions taken during emergencies and critical incidents.Knowledge of crime prevention strategies.Ability to detect, locate, and report smoke, unusual odors, and running water which may indicate safety problems.Knowledge of and skill with computer systems, including spreadsheets, word processing, e-mail, alarm systems, access control software, and surveillance cameras.Knowledge of verbal and non-verbal tactics to safely de-escalate individuals. Ability to use de-escalation strategies, trained control techniques, and the application of restraints as trained. (Successfully complete 16 hours verbal and physical Handle with Care Crisis De-escalation course.Must be able to successfully complete the physical components defense and restraint tactics as described in the Handle with Care Curriculum.)Knowledge of security practices used in safeguarding persons and property.Complete MUHA Security training requirements provided by MUSC Health Pee Dee Division and appropriately perform the responsibilities of a Security Officer.PHYSICAL REQUIREMENTSIndicate the appropriate physical requirements of this job during a shift. Note: reasonable accommodations may be made available for individuals with disabilities to perform the essential functions of this position. (See Handle with Care Crisis De-escalation Curriculum) Physical Demand Level; Occasional Up to 33% of the time, Frequent 34%-66% of the time Constant 67%-100% of the timeConstant requirements are to perform job functions while standing, walking, and sitting. Ability to bend at the waist, kneel, climb stairs, reach in all directions, fully use both hands and legs, possess good finger dexterity, perform repetitive motions with hands, wrists, elbows, and shoulders. Ability to reach in all directions, maintain 20/40 vision corrected, see, and recognize objects close at hand and at a distance, work in a latex safe environment. Perform work duties indoors and outdoors with seasonal weather changes and conditions. Frequently lift and/or carry objects weighing 20 pounds unassisted and ability to lift from 36” to overhead objects or items more than 15 pounds.If you like working with energetic enthusiastic individuals, you will enjoy your career with us!The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: <a href="http://www.uscis.gov/e-verify/employees" rel="nofollow noopener noreferrer" target="_blank">http://www.uscis.gov/e-verify/employees</a>

1st Shift Military Jobs in Patterson, MD

Resume Resources

Get noticed by top employers!

1st Shift Military Jobs in Patterson, MD

GBE Machining Team Lead - 1st Shift Weekend Precision Castparts

Manufacturing Supervisor - COE 2nd Shift Precision Castparts

Security Officer/PRN for Marion, SC, Florence, SC or Black River Medical Center MUSC

Resume Resources