93 Results for

2nd Shift Government Jobs in Wallingford, WA

Jobs

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Renton, WA16 days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA9 days ago

Full-time
Employee

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. Strong communication and interpersonal skills, both written and verbal, with the ability to communicate effectively with a diverse community of customers and employees at all levels.

Renton, WA30+ days ago

Full-time
Employee

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

Bellevue, WA30+ days ago

Full-time
Employee

Provides updates to management and sales on contracts and negotiations and advises sales of contractual eligibility, rights and obligations in concert with senior managers and attorneys. Ability to handle quick turnarounds and work effectively with Sales teams and cross-functional subject matter experts on tight deadlines in a fast-paced environment.

Seattle, WA30+ days ago

Full-time
Employee

Maintains customer-focused tools to support the work of the Government Affairs Department including: bill tracking tools, talking points, self-service functions (including online resources), presentations, one-pagers and direct guidance. Providence Shared Services is a service line within Providence that provides a variety of functional and system support services for our family of organizations across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington.

Federal Way, WA9 days ago

Full-time
Employee

Qualified candidates will have 10+ years of strong public policy and/or corporate government affairs experience at the state legislative or regulatory environment within with a demonstrated ability to independently lead highly-leveraged state advocacy campaigns/initiatives. Washington Non-exempt: Bellingham: $19.13/hour, Burien: $21.63/hour, Everette: $20.77/hour, Unincorporated King County: $20.82/hour, Renton: $21.57/hour, Seattle: $21.30/hour, Tukwila: $21.65/hour, Remainder of Washington state: $17.13/hour.

Seattle, WA30 days ago

Full-time
Employee

Baker Tilly Advisory Group, LP and Baker Tilly US, LLP, trading as Baker Tilly, are independent members of Baker Tilly International, a worldwide network of independent accounting and business advisory firms in 141 territories, with 43,000 professionals and a combined worldwide revenue of $5.2 billion. Baker Tilly is a leading advisory, tax and assurance firm, providing clients with a genuine coast-to-coast and global advantage in major regions of the U.S. and in many of the world's leading financial centers - New York, London, San Francisco, Los Angeles, Chicago and Boston.

Seattle, WA30+ days ago

Full-time
Employee

Bellevue, WA18 days ago

Full-time
Employee

Federal Technical Support Engineer - an engineer with a deep specialization in Identity and Access Management (IAM) and FedRAMP High/Moderate environments. More details about Okta's privacy practices can be found at: https://www.okta.com/privacy-policy.#LI-MM1#LI-HybridP9315.

Seattle, WA17 days ago

$25.75–$27.75 Per Hour
Full-time
Employee

Use impeccable C-I-CARE (a framework containing the key elements of a great interaction and effective communication that we use with patients and each other) in all patient interactions, both clinical and administrative, and ensure a fluid and positive in-office experience through patient intake, same day schedule management, appropriate follow up scheduling, strong knowledge of billing and insurance, monitoring patient feedback and assisting with outreach as necessary. As a One Medical Phlebotomist/Administrative Assistant (internally known as Lab Services Specialist/Member Support Specialist) at one of our offices, you'll provide an exceptional experience for our patients and help them accomplish an important part of their care journey by providing venipuncture as well as other clinical support services.

Kirkland, WA23 days ago

Shifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.

Woodinville, WA30+ days ago

$22–$24 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RECEIVING SPECIALIST (STARLINK) - 2ND SHIFT Starlink is the world's first and largest satellite constellation using a low Earth orbit to deliver broadband internet capable of supporting streaming, online gaming, video calls and more.

Woodinville, WA21 days ago

$22–$25 Per Hour

unassisted + Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position + Must be willing to work in an open-aired environment, lacking temperature controls COMPENSATION AND BENEFITS: Pay range: Inventory Specialist/Level 1: $22.00 - $25.00/hour Inventory Specialist/Level 2: $24.50 - $29.00/hour Inventory Specialist/Level 3: $27.00 - $34.50/hour This role is responsible for completing put-aways for inbound material, picking products for production, filling the lineside build locations with materials, putting finished goods into inventory, picking finished goods for customer orders, and ensuring inventory accuracy.

Kirkland, WA30+ days ago

Communicate production progress and blockers to engineering and leadership - Operate a crane holding sensitive equipment with a payload up to 3000 lbs - Ability to work with various hand tools and calibrated equipment - Use computer software programs for running tests - Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environment Must be able to work Wed-Sat from 4PM-2:30AM Able to stand for long periods of time and perform repetitive assembly operations Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift at least 25 lbs. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.

Kirkland, WA21 days ago

About the team The Liaison Engineering team is part of the Amazon Leo Structural Integrity and Analysis teams (Structural Analysis, Loads and Dynamics, Materials and Processes and Reliability) that is ultimately responsible for Integrity of not only the spacecraft but all other commodities supporting the program, inside and outside of the Mechanical Engineering group. In this role, you'll join Amazon Leo's Structural Integrity and Analysis team as a Liaison Engineer to innovate and solve engineering issues that arise during Amazon Leo production operations leading to every flight of our constellation of satellites.

Kirkland, WA14 days ago

Basic Qualifications - Bachelor's degree or equivalent - 2+ years of professional experience leading a team - 5+ years of hands-on experience in mechanical or electrical hardware assembly, test, and/or installation - Must be able to work 2nd shift hours (5pm to 3:30am, Sun-Wed or Wed-Sat) Preferred Qualifications - Experience hiring, training and leading production teams. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.

Redmond, WA19 days ago

$22–$26.50 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

New!

Redmond, WA5 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Support production engineering during development and pre-production phases by building, assembling, and testing pre-production, qualification, and flight PCBA hardware + Assist with initial PCBA line setup, equipment programming, qualification of test setups, and transition of new designs into production + Program, load, and operate automated SMT production machines including pick & place, reflow ovens, stencil printers, conformal coating, AOI, and X-ray systems + Operate and troubleshoot SMT equipment (pick & place, reflow ovens, stencil printers, conformal coating, AOI, X-ray) with a focus on process stability and yield improvement + Perform rework and recovery on non-conforming hardware while maintaining design integrity and documenting root causes + Support continuous improvement projects including test rack builds, factory automation, and production line enhancements + Thoroughly document processes, failures, and improvements using data to drive corrective actions and yield increases + Provide surge support for critical production, qualification, or development builds + Collaborate with engineers to give real-time feedback on manufacturability, DFM opportunities, and process issues + Assist with training of junior technicians on SMT equipment operation and basic troubleshooting + Work with production support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ years of hands-on experience in SMT/PCBA manufacturing, assembly, or test PREFERRED SKILLS AND EXPERIENCE: + Associates degree, apprenticeship, or military electronics technician training + Experience working directly with engineers in development or new process introduction (NPI) environments + Hands-on experience programming and optimizing SMT processes (pick & place, reflow, conformal coating, through-hole, AOI, or X-ray inspection) + Proficiency reading and interpreting schematics, assembly drawings, Gerber files, and work instructions + Soldering experience with IPC-A-610 or J-STD-001 certification (Class 2 or 3) + Strong troubleshooting and problem-solving skills with minimal supervision + Proficient with Microsoft Excel, Word, PowerPoint, and basic ERP systems + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION AND BENEFITS: Pay range: Production Development Technician/Level 1: $23.00 - $29.00/hour Production Development Technician/Level 2: $28.00 - $34.50/hour Production Development Technician/Level 3: $33.00 - $40.00/hour The ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities.

Kirkland, WA30+ days ago

Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. You will be a part of a high rate; Bar Raising Quality team utilize precision measuring tools to inspect components and assemblies, this also but not limited to the following: - Perform and complete FAIs to AS9102 and present package to engineering for sign off.

New!

Woodinville, WA5 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour

New!

Woodinville, WA3 days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour

Woodinville, WA30+ days ago

$110,000–$140,000 Per Year

As a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$32–$40 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area.

Redmond, WA30+ days ago

$23–$29 Per Hour

INDUSTRIAL MAINTENANCE TECHNICIAN (STARLINK) - 2ND SHIFT The Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems , and overhead doors by third-party contractors to support the production of Starlink. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA11 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 2nd Shift 3:30 PM to 2:00 AM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

New!

Woodinville, WA2 days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Read and interpret engineering blueprints and work instructions + Install new production support equipment, ground support equipment, and/or launch support equipment + Maintain and install all electrical, mechanical, hydraulic, and pneumatic systems + Inspect and assess functionality of critical facility systems (cranes, elevators, compressed air, and overhead doors ) + Troubleshoot mechanical and electrical breakdowns of overhead cranes, overhead doors , and air compressors + Adjust mechanical parts using hand and machine tools + Fabricate parts for repairs and machine upgrades + Conduct routine maintenance and safety checks + Source replacement parts and liaison with vendors + Communicate and schedule production impacts with the production team + Prepare and submit maintenance reports + Repair broken or leaking plumbing to avoid damage and restore full use of affected system (compressed air, water, or hydraulic) + Identify and troubleshoot damaged electrical wiring + Assist HVAC team in maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly when surges of workload occur + Fixing potential safety hazards to avoid injuries + Demonstrates the ability to safely lead energized work. INDUSTRIAL MAINTENANCE TECHNICIAN (STARLINK) - 2ND SHIFT - LEVEL 4/5 The Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems , and overhead doors by third-party contractors to support the production of Starlink.

Redmond, WA16 days ago

$27.40–$49.04 Per Hour

Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . L3Harris announced (https://www.l3harris.com/newsroom/press-release/2026/01/l3harris-sell-majority-stake-space-propulsion-power-business-ae) on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business.

Redmond, WA16 days ago

$22.83–$42.54 Per Hour

Redmond, WA11 days ago

$34–$40 Per Hour

RESPONSIBILITIES: + Optimize PCBA manufacturing processes including paste print, pick-and-place, reflow, conformal coating, selective soldering, board wash, and inspection (X-ray, AOI, SPI, visual) + Program, configure, and improve automated SMT equipment to maximize yield and throughput + Design custom fixtures and tooling to improve process efficiency and ergonomics + Perform Design of Experiments (DOE) and data analysis to drive process capability and yield improvements + Train and mentor technicians on advanced equipment operation and troubleshooting + Rapidly triage and resolve production issues while protecting design integrity and schedule + Define equipment requirements and support validation for next-generation PCBA processes + Identify and execute continuous improvement projects targeting yield, cycle time, and cost + Partner closely with design engineering teams to provide real-time manufacturability feedback + Execute new product introduction (NPI) for PCBA assemblies across multiple work centers + Work with external support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of troubleshooting technical problems in a manufacturing environment PREFERRED SKILLS AND EXPERIENCE: + Bachelor's degree in an engineering, math, or science discipline + Ability to thrive in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems + Software development, professional application power user, or competitive video gaming skills + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Ability to collect and analyze data to improve processes and quality + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $34.00 - $40.00/hour SMT Specialist /Level 2: $38.00 - $45.00/hour SMT Specialist /Level 3: $42.00 - $51.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA18 days ago

$22–$26.50 Per Hour

BASIC QUALIFICATIONS: + High school degree or equivalency certificate + 1+ years of hands on work experience PREFERRED SKILLS AND EXPERIENCE: + 2+ years of hands-on experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists. + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience with electrical wiring + Experience setting up and running tests and experiments + Associate degree ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed.

New!

Woodinville, WA5 days ago

$34–$40 Per Hour

RESPONSIBILITIES: + Install and repair Starlink products for Aviation systems under strict FAA, Warp and other governing guidelines + Operate, collect and report data of test findings for a wide variety of tests, including but not limited to: vibration, shock, thermal, RF, load and any other needed testing to meet FAA certification requirements + Create and document test processes utilizing Test Plan, TestX and Warp related features + Design, procure and perform mechanical and electrical assembly, activation of mission-specific development and continuous-integration test systems for all of Starlink aviation platforms + Drive troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues + Ensure product quality and conformance to specifications + Work closely with development and design engineers, machine shops and external partners on a wide variety of assignments BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2 years working in an electrical or mechanical test/integration environment; OR a bachelor's in a STEM field PREFERRED SKILLS AND EXPERIENCE: + Experience working on aircraft or with aviation/aerospace related hardware + A&P certification + Inspection authorized (IA) certification + Bachelor's degree or 3+ years' experience in related field + Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists + Hands-on experience performing installation work on aircraft. + Hands-on experience fabricating harnesses, electro-mechanical assemblies, printed circuit board assemblies, and test stations + Excellent attention to detail and an insistence on permanently correcting errors + Electromechanical build processes including iron & hot-air soldering; wire crimping and stripping; machine and hand drilling, shaping, cutting, and joining; 3D plastic printing + Electrical debug tools including multimeter, oscilloscope, spectrum analyzer, network analyze + Experience working in a variety of software environments, applications, and languages including Linux, Windows, Microsoft Office, git, SVN, JIRA, Altium, Mentor PCB, NX, Bash, and Python ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed.

Redmond, WA30+ days ago

$25.50–$31 Per Hour

RESPONSIBILITIES: + Lead satellite production team to achieve daily production targets involving mechanical integration and test execution according to work orders + Assist with the development of production processes, and identify continuous improvements to reliably achieve production targets + Build small electrical sub-assemblies + Mechanical/electrical assembly of satellite components, subassemblies, and integration of final vehicle assemblies + Mechanical/electrical assembly of PCB assemblies into product chassis + Build-up battery cell modules + Build solar modules and solar arrays + Wire harnessing + Solder and de-solder through-hole and SMT components + Support conformal coat, masking, epoxy application and coating + Run functional testing of built hardware, including setup, instrumentation, test execution, and teardown + Operate complex automated equipment, including troubleshooting and maintenance + Support the development of prototype test capabilities for spacecraft component development and life tests + Assist in the identification, installation and implementation of test equipment, instrumentation and data acquisition systems + Ensure lab equipment is maintained and calibrated, track calibration schedules + Responsible for some preventative maintenance activities on test equipment and data acquisition systems + Identify test equipment requirements for planned tests, maintain test consumables inventory, and develop test procedures and processes accordingly + Perform test setups as needed to support developments across several test regimes - thermal, shock, thermal vacuum, vibration + Manage schedule priorities and independently executing work to meet company deliverables BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months as a SpaceX Technician or 1+ years of experience in an outside aerospace production environment PREFERRED SKILLS AND EXPERIENCE: + 2+ years of experience in electro-mechanical assembly, integration or mechanical assembly experience + Associate degree + Airframe and Powerplant (A&P) license + Demonstrated ability to read, interpret and work from drawings, controlled documentation and processes such as: layout drawings, mechanical drawings, assembly procedures/work instructions; schematics, engineering drawings, and parts list + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Experience with electrical wiring + IPC and/or J-STD certification + Electro-mechanical assembly and prototype development experience + Experience setting up and running tests and experiments + Soldering experience ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Renton, WA12 days ago

$24.25–$28.25 Per Hour
Full-time
Employee

Seattle, WA30+ days ago

Full-time
Employee

Tools, Systems, and Professional Development: Maintain a strong working knowledge of internal Motorola Solutions systems and processes (e.g., Oracle SLC, Clarify, Motorola On-line) and effectively utilize business tools (e.g., Google Suite and Microsoft Office applications). Service Delivery & Collaboration: Provide assistance and information to the TSM (Technical Service Manager) and other delivery channels (regional channel partners/sub-contractors) to ensure contractual compliance and channel capability.

Federal Way, WA30+ days ago

Full-time
Employee

What you'll likely work on: Use impeccable C-I-CARE (a framework containing the key elements of a great interaction and effective communication that we use with patients and each other) in all patient interactions, both clinical and administrative, and ensure a fluid and positive in-office experience through patient intake, same day schedule management, appropriate follow up scheduling, strong knowledge of billing and insurance, monitoring patient feedback and assisting with outreach as necessary. As a One Medical Phlebotomist/Administrative Assistant (internally known as Lab Services Specialist/Member Support Specialist) at one of our offices, you'll provide an exceptional experience for our patients and help them accomplish an important part of their care journey by providing venipuncture as well as other clinical support services.

Seattle, WA30+ days ago

Full-time
Employee

3+ years of experience in one of the following: LMR, RF Systems, Radio Communications, Radio Frequency, Motorola equipment, Wired/Wireless Communication Systems, IT Systems, Telecommunications, Public Safety, Engineering, Networking Equipment, IP Networking, Solutions Architecture, ASTRO 25, P25, WAVE VoIP, or Military experience. This role, located in Germany and operating under German labor laws but reporting to a U.S. Manager, involves providing technical field service support for Enterprise Land Mobile Radio (LMR) networks across the EMEA area of operations, primarily for U.S. DoD Federal Government customers (Army, Air Forces, and Navy).

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Responsibilities include but are not limited to: Lead development and implementation of capture strategy and lead campaign teams for sales of Blue Origin products and services to U.S. Government (USG) acquisition programs, and creation of new opportunities, in coordination with company senior leadership across multiple business units.

Renton, WA30+ days ago

$40–$45 Per Hour
Full-time
Employee

Required Skills: Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Additionally, the employee must have the skill and knowledge to perform one or more of the skills listed below, along with any lower level sealant level described below: Sealer - Major Assembly / Large structure sealing / Aerodynamic seal.

Renton, WA30+ days ago

$35–$42 Per Hour
Full-time
Employee

Additionally, the employee must have the skill and knowledge to perform one or more of the skills listed below, along with any lower level sealant level described below: Sealer - Major Assembly / Large structure sealing / Aerodynamic seal. Apply scotch cast, leveling compound, aerodynamic seal and pressure test, working from drawings, documents, process specifications, quality control requirements and established processes and procedures.

Renton, WA30+ days ago

$35–$40 Per Hour
Full-time
Employee

Seattle, WA30+ days ago

Remote

$130,000–$150,000 Per Year
Full-time
Employee

We trust you to do important work and bring the best version of yourself to work every day, so we want to help you achieve a work-life balance while consistently challenging yourself. In the role, Director of Patient Financial Services, you will be responsible insurance billing, follow-up, cash posting, quality and compliance activities within span of control, while ensuring compliance with Federal and State statutes and guidelines.

Seattle, WA30+ days ago

Full-time
Employee

The Marshals Service manages various types of assets, including real estate, vehicles, commercial businesses, cash, financial instruments, jewelry, art, antiques, collectibles, vessels and aircraft. A package providing employee only coverage can be built around our basic plans at $0 employee cost for: Medical, Dental, Vision, Term Life Insurance, Accidental Death & Dismemberment Insurance, Short-Term Disability, and Employee Assistance Program.

Seattle, WA30+ days ago

Full-time
Employee

Support GSA Schedule/vehicles ongoing required reporting, fee remittance, and audit readiness support; and administrative and enhancement Modifications (Authorized Negotiator, SIN additions, Rate adjustments); maintain GSA Schedule catalog and reporting files. Strong verbal and written communication, reading comprehension, and critical thinking skills with the ability to effectively interact with individuals at all levels of responsibility and authority; capability to work collaboratively with the team as well as independently.

Seattle, WA30+ days ago

Full-time
Employee

What you'll likely work on: Use impeccable C-I-CARE (a framework containing the key elements of a great interaction and effective communication that we use with patients and each other) in all patient interactions, both clinical and administrative, and ensure a fluid and positive in-office experience through patient intake, same day schedule management, appropriate follow up scheduling, strong knowledge of billing and insurance, monitoring patient feedback and assisting with outreach as necessary. Continue to care for our members beyond the lab room by answering patient messages, following up on lab cases and assisting our providers and virtual medical team with clerical duties such as, but not limited to biometric screening forms, medical record and consult review, billing inquiries, and DOH reporting.

Queen Anne, WA17 days ago

$25–$27 Per Hour
Full-time
Employee

Seattle, WA30+ days ago

$29–$35 Per Hour
Full-time
Employee

We care about your personal well being as much as your professional success and offer generous benefits to full time employees including: 100% company paid comprehensive health benefits for Medical, Dental, Vision, Short Term Disability, Long Term Disability and Life Insurance, Retirement plan with generous company contributions, FSA for Health and Dependent Care, 3 weeks of vacation time in the first year of employment, 11 paid company holidays, paid sick time, paid family leave, and more! You will support and interact with medium- and heavy-duty fleets throughout the greater Seattle-Tacoma Metropolitan area, as well as the state of Washington, who are looking to learn more about potential pathways and resources that aid a fleet in its transition to zero-emission technologies.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Government job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Government Jobs in Wallingford, WA

Jobs

Laminator I - 2nd ShiftSekisui Aerospace

Aerospace Assembler I - 2nd ShiftSekisui Aerospace

Aerospace Assembler II - 2nd ShiftSekisui Aerospace

Production Supervisor 2nd ShiftSekisui Aerospace

Paint Prepper II - 2nd ShiftSekisui Aerospace

Additive Manufacturing Machine Technician (2nd Shift)Blue Origin LLC

Machinist Weekday 2nd ShiftBlue Origin LLC

Sr. Contracts Negotiation Manager - Public Sector, State/Local GovernmentT-Mobile USA, Inc

Senior Government Affairs Officer - HybridProvidence St. Joseph Health

State Government Affairs Sr DirectorDaVita

Government Internal Audit ManagerBaker Tilly US, LLP

CNC Laser Operator - C ShiftBlue Origin LLC

Technical Support Engineer - Federal (Night Shift)OKTA

Phlebotomist / Administrative Assistant1Life Healthcare, Inc.

Manufacturing Assembly Technician III (2nd Shift), Amazon LeoAmazon

Receiving Specialist (Starlink) - 2nd ShiftSpaceX

Inventory Specialist (Starlink) - 2nd ShiftSpaceX

Satellite Dynamic Test Technician II (2nd Shift), Final IntegrationAmazon

Liaison Engineer, 2nd Shift, Amazon LeoAmazon

Production Supervisor, 2nd Shift BH, Amazon LeoAmazon

Laser Production Technician (Starlink) - 2nd ShiftSpaceX

Development Technician (PCBA) - 2nd Shift (Starlink)SpaceX

Quality Technician - 2nd Shift, Project KuiperAmazon

Production Machinist (Starlink) - 2nd ShiftSpaceX

Production Machinist (Starlink) - 2nd Shift - Level 4/5SpaceX

Supervisor, Precision Machining (Starlink) - 2nd ShiftSpaceX

CMM Programmer (Starlink) - 2nd ShiftSpaceX

Industrial Maintenance Technician (Starlink) - 2nd ShiftSpaceX

Integration Technician (Starlink) - 2nd ShiftSpaceX

Industrial Maintenance Technician (Starlink) - 2nd Shift - Level 4/5SpaceX

Manufacturing Technician C - 2nd ShiftL3Harris

Manufacturing Technician B - 2nd ShiftL3Harris

Manufacturing Specialist - 2nd ShiftSpaceX

Production Technician - 2nd Shift (Starlink)SpaceX

Integration Specialist (Starlink Aviation) - 2nd ShiftSpaceX

Lead Technician - Starlink Satellite Mech and Electronic Production (Starlink) - 2nd shiftSpaceX

Production Technician II - CompositeSekisui Aerospace

Senior Customer Support Manager - Idstein, GermanyMotorola Solutions

Phlebotomist / Administrative Assistant - Federal Way1Life Healthcare, Inc.

Field Service Representative - Idstein, GermanyMotorola Solutions

Sr. Manager, National Security SalesBlue Origin LLC

Structures Mechanic22nd Century Technologies, Inc.

Fuel Cell Sealer (M22BI4)22nd Century Technologies, Inc.

Fuel Cell Sealer22nd Century Technologies, Inc.

Director of Patient Financial Services - Remote/NationwideSignature Performance, Inc.

Junior Financial Analyst Supporting the USMSFORFEITURE SUPPORT

Associate, ECC ContractsKPMG LLP

Phlebotomist / Administrative Assistant - Capital Hill1Life Healthcare, Inc.

Phlebotomist / Administrative Assistant - SLU1Life Healthcare, Inc.

Zero Emission Fleet AdvisorCALSTART, Inc.

Resume Resources