Electromechanical Repair Tech, 2nd Shift (10yrs exp) Butler America AerospaceElectromechanical Repair Tech, 2nd Shift (10yrs exp)Oldsmar, FL$26–$35 / hourFull timeHigh School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. Required: 10yrs experience, Assembly, Soldering, CCA Circuit Card Assembly equip repair, Locate/troubleshoot/diagnose failures/replace defective components/modules of in-line Manuf Equip.
Inspector-2nd Shift Butler America AerospaceInspector-2nd ShiftOldsmar, FL$19–$28 / hourFull timeBasic qualifications include the following: - Must have MIN 2 years prior experience visually inspecting solder connections of both surface mount and plated thru hole components in accordance with IPC-A-610 & IPC-J-STD-001 requirements. Uses predetermined methods, inspection operations and prescribed specifications to visually inspect solder and conformal coating of circuit card assemblies IAW IPC-A-610 & IPC-J-STD-001 requirements.
Patient Transporter - 2nd Shift - Mon-Fri 2:30-11p - Bayfront Hospital - St. Petersburg Orlando HealthPatient Transporter - 2nd Shift - Mon-Fri 2:30-11p - Bayfront Hospital - St. PetersburgSt. Petersburg, FloridaFull timeOrlando Health Bayfront Hospital is part of the Orlando Health system of care, which includes award-winning hospitals and ERs, specialty institutes, urgent care centers, primary care practices and outpatient facilities that span Florida’s east to west coasts. The hospital’s Level II Trauma Center is the only adult trauma center in Pinellas County and, in partnership with Johns Hopkins All Children’s Hospital, is one of Florida’s 13 state-certified Level III Regional Perinatal Intensive Care Centers.
Patient Transporter - 2nd Shift - Mon-Fri 2:30-11p - Bayfront Hospital - St. Petersburg Bayfront HealthPatient Transporter - 2nd Shift - Mon-Fri 2:30-11p - Bayfront Hospital - St. PetersburgSt. Petersburg, FloridaFull timeOrlando Health Bayfront Hospital is part of the Orlando Health system of care, which includes award-winning hospitals and ERs, specialty institutes, urgent care centers, primary care practices and outpatient facilities that span Florida’s east to west coasts. The hospital’s Level II Trauma Center is the only adult trauma center in Pinellas County and, in partnership with Johns Hopkins All Children’s Hospital, is one of Florida’s 13 state-certified Level III Regional Perinatal Intensive Care Centers.
General Warehouse Production 2nd shift ResourceMFGGeneral Warehouse Production 2nd shiftSeminole, FL$14.50–$15.50 / hourFull timeCome and work as a production worker at a local growing company, offers great benefits with opportunities to advance and learn! Will be packing, unpacking, counting, labeling or operating printing machine.
Machine Operator US, 2nd Shift RefrescoMachine Operator US, 2nd ShiftTampa, FLFull timeAdhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Communication Skills – Effective verbal and written communication with team members and supervisors, reporting issues accurately, and collaborating to ensure smooth workflow.
Outside Machinist - Shipyard 2nd Shift Gulf Marine RepairOutside Machinist - Shipyard 2nd ShiftTampa, FLFull timeYou disassemble, reassemble, and test towing winch components, mooring winches, capstans, and anchor windlasses as well as hydraulic and mechanical cranes. Skilled with precision measuring tools such as dial calipers, micrometers, and stack height gauges, you perform all machining tasks with exactness.
Electronics Technician - 2nd Shift First Tek, Inc.Electronics Technician - 2nd ShiftOldsmar, FLTypical Minimums: High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assembler-2nd Shift First Tek, Inc.Assembler-2nd ShiftOldsmar, FLThe successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. " Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.
Inspector-2nd Shift First Tek, Inc.Inspector-2nd ShiftOldsmar, FLDescription: Uses predetermined methods, inspection operations and prescribed specifications to visually inspect solder and conformal coating of circuit card assemblies IAW IPC-A-610 & IPC-J-STD-001 requirements. Basic qualifications include the following: - Must have MIN 2 years prior experience visually inspecting solder connections of both surface mount and plated thru hole components in accordance with IPC-A-610 & IPC-J-STD-001 requirements.
Inspector - 2nd Shift Nesco Resource, LLCInspector - 2nd ShiftOldsmar, FL$19–$28 / hourDescription: Uses predetermined methods, inspection operations and prescribed specifications to visually inspect solder and conformal coating of circuit card assemblies IAW IPC-A-610 & IPC-J-STD-001 requirements. Basic qualifications include the following: - Must have MIN 2 years prior experience visually inspecting solder connections of both surface mount and plated thru hole components in accordance with IPC-A-610 & IPC-J-STD-001 requirements.
Assembler-2nd Shift Nesco Resource, LLCAssembler-2nd ShiftOldsmar, FL$23–$26 / hourThe successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.
Front End Loader Operator 2nd shift Nesco Resource, LLCFront End Loader Operator 2nd shiftTampa, FL$17–$18 / hourMaintain a clean and organized work area by leveling surfaces, removing debris, and assisting with general cleanup using hand tools or hoses. Ability to lift to 50 lbs., remain on your feet for extended periods, and work in varying environmental conditions.
Electrical Assembler - 2nd Shift Nesco Resource, LLCElectrical Assembler - 2nd ShiftClearwater, FL$21.50 / hourKey Responsibilities: Assemble electronic components, wiring, and hardware into sub-assemblies and final products in accordance with engineering drawings, schematics, and written instructions. The Assembler II is responsible for performing a variety of moderately complex assembly tasks in support of electronic products and systems.
Inspector-2nd Shift Nesco Resource, LLCInspector-2nd ShiftOldsmar, FL$19–$28 / hourUses predetermined methods, inspection operations and prescribed specifications to visually inspect solder and conformal coating of circuit card assemblies IAW IPC-A-610 & IPC-J-STD-001 requirements. - Must have MIN 2 years prior experience visually inspecting solder connections of both surface mount and plated thru hole components in accordance with IPC-A-610 & IPC-J-STD-001 requirements.
Circuit Card Inspector - 2nd Shift PGS WorldwideCircuit Card Inspector - 2nd ShiftOldsmar, FL$19–$28 / hourThis 2nd shift role requires prior solder and coating inspection experience, the ability to read engineering drawings and inspection documentation, strong PC skills, and the ability to pass a required medical exam. The Circuit Card Inspector will visually inspect solder and conformal coating on circuit card assemblies in accordance with IPC-A-610 and J-STD-001 requirements.
Med-tech Assisted Living (2nd Shift/Part-time) SUNSHINE PALMA CEIAMed-tech Assisted Living (2nd Shift/Part-time)Tampa, FLThe successful candidate will play a crucial role in ensuring the health and comfort of our residents by administering medications, monitoring health statuses, and providing general assistance with daily activities. - Monitor and document residents’ responses to medications, noting any adverse reactions and reporting them to healthcare providers.
Manufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift M-F 2:00pm- 10pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Team Lead Core 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Team Lead Core 2nd Shift 2pm to 10pm (P)FLWill be working with the Team to ensure that the Core product is moving through the designated milestones, ensuring that the operators are safe, and remain focused on their daily work lists, and that engineering, quality, safety or management help is provided when issues arise. Creating and assigning work lists for each employee in the department, ensuring that employees remain productive, and produce quality work while performing direct production work 50% of the time.
Manufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P) Siemens Energy AGManufacturing Technician - Wax Cleaning 2nd Shift 2pm-10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.
Manufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Rough Knock - Out Operator 2nd Shift 2pm to 10:00pm (P)FLPerforming basic or specifically defined maintenance operations; cooperating with maintenance technicians and/or external service providers in repair issues and using hand tools, including wrenches, allen wrenches, and screw drivers. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Inspector Wax 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Inspector Wax 2nd Shift 2pm to 10pm (P)Gibsonton, FLAbility to communicate effectively as this position requires permanent communication with Engineering and constant review of Work Instructions to ensure quality, good attention to detail and eye/hand coordination skills. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Core X-Ray 2nd Shift 2pm to 10pm (P)FLWill work in the Core Department with X-Ray Equipment using process knowledge, basic engineering principles, previous experience, and creativity, to help develop and improve manufacturing processes that result in the production of quality castings. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Team Lead - Finishing 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Team Lead - Finishing 2nd Shift 2pm to 10:00pm (P)FLAs a Team Leader in Finishing, you will work alongside operators performing daily tasks in a lead role and ensuring all assigned tasks are performed on time according to proper procedures and specifications. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Core Visual Inspector 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Core Visual Inspector 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Proficiency in the English language (reading, writing, speaking).Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.
Manufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P)FLWill perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Manufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P) Siemens Energy AGManufacturing Technician Core Finishing 2nd Shift 2pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Using diamond bit tools, sandpapers to sand down die lines on the main body of the core and pneumatic air tools to remove tie bars on core.
Manufacturing Tech Core Blue Light 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Tech Core Blue Light 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.
Manufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGManufacturing Technician FPI Rework 2nd Shift 2:00pm to 10:00pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Experience with Inspection Equipment (calipers, pin gauges, etc.) using the metric system and able to perform math functions, read/comprehend Engineering instructions, and mechanical attitude.
Manufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P) Siemens Energy AGManufacturing Technician Finishing FPI Processor 2nd Shift 2pm to 10pm (P)FLWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Achieve and maintain internal certifications per SNT-TC-1A and customer requirements including examination for general method knowledge, specific procedure understanding and practical performance of the method.
Tier 3 Core Finishing 2nd Shift 2:00pm to 10:00pm (P) Siemens Energy AGTier 3 Core Finishing 2nd Shift 2:00pm to 10:00pm (P)Gibsonton, FLWill participate in daily production meetings to review production schedules and the priorities of work orders to be completed meeting daily targets and priorities provided by team leads and members of management. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.
Assembler-2nd Shift PlanIT GroupAssembler-2nd ShiftOldsmar, FL$23–$26 / hourThe successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Conduct visual inspections and use inspection tools (e .g., microscopes, AOI ) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.
NewBilingual Spanish & English Credit Assistance Specialist - 2nd Shift Macpower Digital Assets Edge Private LimitedBilingual Spanish & English Credit Assistance Specialist - 2nd ShiftTampa, FL$24 / hourJob expectations include leveraging problem-solving competencies, sound judgement and decision making, and providing exceptional client service and empathy while meeting both the banks and client needs. Responsibilities: Reaches out to delinquent clients to secure payment and determines reason for delinquency on active or inactive loan, deposit, and credit card accounts.
NewCredit Assistance Specialist - 2nd Shift Macpower Digital Assets Edge Private LimitedCredit Assistance Specialist - 2nd ShiftTampa, FL$24 / hourJob expectations include leveraging problem-solving competencies, sound judgement and decision making, and providing exceptional client service and empathy while meeting both the banks and client needs. Responsibilities: Reaches out to delinquent clients to secure payment and determines reason for delinquency on active or inactive loan, deposit, and credit card accounts.
Solder Assembler - 2nd Shift PGS WorldwideSolder Assembler - 2nd ShiftOldsmar, FL$23–$26 / hourThis role requires hands-on soldering experience, strong visual inspection skills, and the ability to work accurately in a fast-paced manufacturing environment. As a Veteran Founded company, we know that the military has given you the skills and training you need to succeed in positions like this, and we want to support your success in the civilian sector however we can.
Riggers - Shipyard - 2nd shift Gulf Marine RepairRiggers - Shipyard - 2nd shiftTampa, FLFull timeThis role works closely with crane operators and supervisors to ensure all lifts are executed safely, efficiently, and in compliance with established procedures. Work Environment: This position operates in a shipyard environment with exposure to outdoor weather conditions, heavy machinery, and high noise levels.
Forklift Operator I 2nd shift Nesco Resource, LLCForklift Operator I 2nd shiftTampa, FL$18.75 / hourResponsible in selecting the correct product according to the pick sheet, placing the product on a pallet in a specified manner and placing the completed order at a designated staging area for shipment to our customers and/or dealers. Job Description: In this role as a Forklift Operator, you will safely operate all equipment while working within a team to operate equipment to fill, label and package materials produced in the plant.
Sterile Processing Tech II - 2nd Shift - Bayfront Hospital - St Petersburg FL Orlando Health Ventures l LLCSterile Processing Tech II - 2nd Shift - Bayfront Hospital - St Petersburg FLSt. Petersburg, FLPosition Summary Position Summary: Title: Sterile Processing Tech II Site: Orlando Health Bayfront Hospital Location: St. Petersburg, FL Shift: 2nd/Mid Shift, Full-Time Demonstrates, through clinical practice, knowledge, and a clear understanding of the entire sterilization process, from cleaning and decontamination through packaging, sterilization, and distribution of instrument trays for surgical case carts according to pick lists or surgeon's preference cards. Orlando Health Bayfront Hospital is part of the Orlando Health system of care, which includes award-winning hospitals and ERs, specialty institutes, urgent care centers, primary care practices and outpatient facilities that span Florida's east to west coasts.
Patient Transporter - 2nd Shift - Mon-Fri 230-11p - Bayfront Hospital - St. Petersburg Orlando Health Ventures l LLCPatient Transporter - 2nd Shift - Mon-Fri 230-11p - Bayfront Hospital - St. PetersburgSt. Petersburg, FLPosition Summary Position Title: Transporter Department: Patient Transport Site: Orlando Health Bayfront Hospital Location: St. Petersburg, Florida Shift: 2nd / Mid Shift Schedule: Full-Time | Five 8-hr shifts per week | Mon-Fri 2:30pm-11pm This self-motivated Team Member must possess the ability to work independently as well as in a team setting with others in multiple departments and disciplines. Orlando Health Bayfront Hospital is part of the Orlando Health system of care, which includes award-winning hospitals and ERs, specialty institutes, urgent care centers, primary care practices and outpatient facilities that span Florida's east to west coasts.
Manager Patient Access - Full-Time - Mid 2nd Shift - Emergency Department - Bayfront Hospital - St. Petersburg FL Orlando Health Ventures l LLCManager Patient Access - Full-Time - Mid 2nd Shift - Emergency Department - Bayfront Hospital - St. Petersburg FLSt. Petersburg, FLPosition Summary Overview: Title: Manager, Patient Access Department: Emergency Room Registration Site: Orlando Health Bayfront Hospital Location: St. Petersburg, FL Schedule: Second / Mid Shift, Full-Time Compensation: Base + Leadership Incentive Responsible for the appropriate delivery of patient access services for one or more locations throughout Orlando Health as assigned with combined total net operating revenue of $200 million and higher. Responsible for the following functions: discharge support; account maintenance; Mentor; on-site training; recertification tracking; timekeeping/payroll reports; account conversion; Ad Hoc reporting; quality assurance; system implementation/conversion; coaching plans; staff coverage; daily coaching; personnel issues and staff development; productivity; and maintaining Joint Commission requirements.
Vapor Phase Coating - Chemical Process Operator 2nd shift Chromalloy Gas Turbine LLCVapor Phase Coating - Chemical Process Operator 2nd shiftOldsmar, FLIf this position requires access to export-controlled technology and technical data, as defined in the Export Administration Regulations and or the International Traffic in Arms Regulations, any offer of employment is contingent upon Chromalloy's determination, in its sole discretion, if any additional authorization for the employee to access such technology is required and obtainable in a manner that meets its immediate business needs prior to beginning work. Examples of equipment types: abrasive blasting systems, parts washers and/or aqueous cleaning lines, high temperature ovens and furnaces, material handling equipment, surface enhancement equipment, Masking of critical to quality demarcation lines with various styles of maskants.
Shell Production Operator 2nd shift Chromalloy Gas Turbine LLCShell Production Operator 2nd shiftTampa, FLWe are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
Facilities and General - Maintenance Technician 2nd shift Chromalloy Gas Turbine LLCFacilities and General - Maintenance Technician 2nd shiftTampa, FLChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
Hand Soldering Technician - 2nd shift PGS WorldwideHand Soldering Technician - 2nd shiftOldsmar, FL$18–$24 / hourThe Hand Soldering Technician will perform precision hand soldering, de-soldering, rework, and component-level repair on electronic and electromechanical assemblies. Experience using soldering irons, solder-paste dispensing tools, hot-air rework stations, de-soldering tools, and precision hand tools.
Manufacturing Supervisor (2nd shift) CIRCOR International IncManufacturing Supervisor (2nd shift)Tampa, FLHelp drive daily change by establishing communication channels for feedback and using company-wide systems to ensure that all employees feel like stakeholders and have a voice in the workplace. Collaborate in developing and defining strategies to ensure mid- and long-term production goals are met, while helping to maintain the efficiency and quality of production.
Senior Electronics / Avionics Technician - 2nd shift GE Aerospace.Senior Electronics / Avionics Technician - 2nd shiftClearwater, FLThis role is ideal for experienced electronics or avionics technicians who enjoy working directly with hardware, supporting production flow, and solving complex technical issues on the shop floor. This is a hands-on technical role supporting the testing, troubleshooting, repair, and maintenance of complex electronic and electro-mechanical avionics hardware in a production and MRO environment.
MET - SR. Electronic Technician SMT - 2nd shift GE Aerospace.MET - SR. Electronic Technician SMT - 2nd shiftClearwater, FLIn addition to working in a facility awarded OSHAS's highest safety rating, you will be part of a diverse team of 400+ employees, solving the global challenge of sustainable flight, earning merit-based rewards, working in a climate-controlled environment, and having opportunities for continuous learning and development. Work environment: Clearwater is a provider of engineering, circuit card assembly, OEM Avionics, and MRO services to commercial and military customers, with products and technologies that are diverse and highly sophisticated.
SMT Electronics Operator - 2nd shift GE Aerospace.SMT Electronics Operator - 2nd shiftClearwater, FLIn addition to working in a facility awarded OSHAS's highest safety rating, you will be part of a diverse team of 400+ employees, solving the global challenge of sustainable flight, earning merit-based rewards, working in a climate-controlled environment, and having opportunities for continuous learning and development. Joining our collaborative and diverse team means bringing your unique perspectives, innovative spirit, and drive to a people-first organization that values your ideas and supports your growth through our ongoing LEAN transformation.
Riggers - Shipyard -1st & 2nd Shift Gulf Marine RepairRiggers - Shipyard -1st & 2nd ShiftTampa, FLThis role works closely with crane operators and supervisors to ensure all lifts are executed safely, efficiently, and in compliance with established procedures. Work Environment: This position operates in a shipyard environment with exposure to outdoor weather conditions, heavy machinery, and high noise levels.