79 Results for

2nd Shift Jobs in Lynnwood, WA

Jobs

Poulsbo, WA22 days ago

Full-time

Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).

Seattle, WA9 days ago

We make it easy for mental health providers to take insurance by credentialing you with the nation's largest networks, handling billing and admin paperwork, and helping you earn more stable income with higher rates. Headway is here to help you start accepting insurance with ease, increase your earnings with higher rates, and start taking covered clients sooner.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Renton, WA17 days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA10 days ago

Full-time
Employee

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. Strong communication and interpersonal skills, both written and verbal, with the ability to communicate effectively with a diverse community of customers and employees at all levels.

Renton, WA30+ days ago

Full-time
Employee

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

Seattle, WA30+ days ago

Full-time
Employee

USD - United States - US. DELIVERY_ACCOUNT_OPERATIONS.

Marysville, WA29 days ago

$17.13–$22.35 Per Hour

Reference number** 2026-176875 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Balancing **Job title** Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: - Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD 17.13/hr - 22.35/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Marysville, WA29 days ago

$17.13–$22.35 Per Hour

Reference number** 2026-176869 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Bonder 2nd shift $1.25 per hour shift premium Train on 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Bonding of aircraft interior structures and parts, such as bins, galleys and lavatories and creating sub-assemblies for the completion of aircraft interior structures and parts using engineering drawings, company and customer specifications. **Annual salary** USD 17.13/hr - 22.35/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Seattle, WA30+ days ago

Full-time
Employee

Kirkland, WA30+ days ago

$24.52–$36.79 Per Hour

ESSENTIAL JOB FUNCTIONS** + May occasionally perform the set-up, testing and troubleshooting of circuits, components, instruments and mechanical assemblies + Test and troubleshoot (less complex) assemblies and/or final systems + May occasionally complete rework on assemblies and/or systems as a result of testing + May occasionally prepare reports of summarizing findings + May occasionally assist in the set-up of specialized test equipment + Monitor and adjust production processes for quality and productivity + Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components **MINIMUM QUALIFICATIONS** **Education/Experience:** + Associate degree (AS) in Electronics Technology or related field/ equivalent electronics military schooling and experience required * _High-power electronics and/or high-power avionics technician experience may be considered in lieu of formal education. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Production Test Technician should have a basic mechanical/electrical knowledge, seeking further guidance from Sr.

Kirkland, WA12 days ago

System Integration & Setup: Perform functions associated with all manufacturing operations, including working with engineers in set-up, as well as performing troubleshooting, rework, and quality testing related to the production of parts, components, subassemblies, and final assemblies. This role performs high-level technical functions across the full manufacturing lifecycle, assisting engineering with the setup of complex systems, rigorous quality testing, and the troubleshooting and rework required to bring aerospace components to final flight-readiness.

Kirkland, WA10 days ago

$21.93–$29.67 Per Hour

They will complete the following job duties: + Perform inspection of manufacturing goods during the manufacturing process + Conducts dimensional and electrical inspection of sub-assemblies or final systems assemblies + Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers + Interprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies + May perform in process inspections of rework items **MINIMUM REQUIREMENTS** **Education:** + High School Diploma or equivalent is required. + Demonstrates familiarity (typically 1-2 years of Production experience in the essential functions of the position) **Technical Skills:** + Basic computer skills, including email + Basic ERP skills + Basic Microsoft Office Suite + Ability to obtain J-Std and IPC certifications + May require flight critical certification **Physical Abilities:** + May be stationary for long periods of time + May lift up to 25 pounds + Near Vision - The ability to see details at close range (within a few feet of the observer) **Competenices:** + Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.

Kirkland, WA24 days ago

$31.76–$47.64 Per Hour

Technical Skills:** + Data base user interface and query software + Electronic mail software + Enterprise resource planning ERP software + Microsoft Office + Microsoft Excel + Electrical/electronic knowledge + Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming **Physical Abilities:** + Manual dexterity + Lifting heavy (typically 40 lbs.) items + Color differentiation **Work Environment:** + Exposure to high voltage + Exposure to LN2 + Exposure to power tools + Exposure to chemicals + Moderate noise environment **EMPLOYMENT ELIGIBILITY REQUIREMENTS** + As a US Department of Defense Contractor, this position may involve access to items subject to U.S. export-control laws. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Test Engineering Technician will build, test, troubleshoot, repair, and modify developmental and production electronic components, parts, equipment, and systems while applying principles and theories of electronics, electrical circuitry, and electronic and electrical testing.

Woodinville, WA30+ days ago

$110,000–$140,000 Per Year

As a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Marysville, WA30+ days ago

$17.13–$24.57 Per Hour

Reference number** 2026-170996 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** HDF Operator, 2nd Shift $1.25 per hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Constructs aircraft structure parts by laying-up resin infused carbon fiber in a sequence prior to processing in an autoclave as described on engineering drawings and company specifications. **Annual salary** "$17.13- $24.57 Hourly" **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Marysville, WA12 days ago

$17.13–$24.57 Per Hour

Annual salary** "$17.13- $24.57 Hourly" **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Marysville, WA23 days ago

$20.79–$32.68 Per Hour

Reference number** 2026-172481 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Structures Mechanic Ceilings 2nd Shift $1.25 per hour Shift Premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications. **Annual salary** $20.79 - $32.68 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Marysville, WA29 days ago

$17.13–$24.57 Per Hour

Annual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176886 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Cascade Tool Prep 2nd shift $1.25 per hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Cascade tool prep is a multi-functional department.

Marysville, WA30+ days ago

Reference number** 2026-175200 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** HDF Operator 2nd Shift $1.25 per hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Constructs aircraft structure parts by laying-up resin infused carbon fiber in a sequence prior to processing in an autoclave as described on engineering drawings and company specifications. **Annual salary** USD $35,640.00 - $51,10.000 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes

Marysville, WA14 days ago

$35,640–$51,100 Per Year

Annual salary** USD $35,640.00 - $51,100.00" **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-178357 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Cascade Tool Prep 2nd shift $1.25 per hour Shift Premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Cascade tool prep is a multi-functional department.

Marysville, WA29 days ago

$17.13–$24.57 Per Hour

Annual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176888 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Sealant Operator 2nd Shift $1.25 per hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Builds aircraft 787 structures carbon fiber parts using resins and epoxies using engineering drawings, company and customer specifications.

Seattle, WA18 days ago

In addition to focusing on quality manufacturing, the Seattle team enjoys an energetic and inclusive workplace culture, enhanced by engagement programs, volunteer days, and activities that make work both rewarding and enjoyable. If you're seeking a place to develop your career in beverage production while being part of a dynamic and fun team, our Seattle location stands out as an excellent choice.

New!

Everett, WA2 days ago

Requirements + Job Requirement + Upload, download, and cycle NC programs effectively establishing "production rhythms" to produce the number of expected parts according to OEE goals. *We are accepting entry level machinists as well* CNC Level 2,3, and 4 Machinists are expected to run proven jobs with some technical instruction.

New!

Woodinville, WA6 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 6+ months working in a production environment + 6+ months experience handling or working with machined hardware PREFERRED SKILLS AND EXPERIENCE: + 2+ years of machining experience + Experience using pallet systems and cells + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime, and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 1: $23.00 - $29.00/hour Production Machinist/Level 2: $28.00 - $34.50/hour Production Machinist/Level 3: $33.00 - $40.00/hour

New!

Woodinville, WA4 days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour

Redmond, WA30+ days ago

$32–$40 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This role is tasked with working in close concert with machinists, leads, engineering teams, and machining operations management to increase the accuracy and development part success rate of manufactured components from the Starlink development machining area.

Woodinville, WA30+ days ago

$22–$24 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RECEIVING SPECIALIST (STARLINK) - 2ND SHIFT Starlink is the world's first and largest satellite constellation using a low Earth orbit to deliver broadband internet capable of supporting streaming, online gaming, video calls and more.

Woodinville, WA22 days ago

$22–$25 Per Hour

unassisted + Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position + Must be willing to work in an open-aired environment, lacking temperature controls COMPENSATION AND BENEFITS: Pay range: Inventory Specialist/Level 1: $22.00 - $25.00/hour Inventory Specialist/Level 2: $24.50 - $29.00/hour Inventory Specialist/Level 3: $27.00 - $34.50/hour This role is responsible for completing put-aways for inbound material, picking products for production, filling the lineside build locations with materials, putting finished goods into inventory, picking finished goods for customer orders, and ensuring inventory accuracy.

Redmond, WA12 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 2nd Shift 3:30 PM to 2:00 AM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

New!

Woodinville, WA3 days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Read and interpret engineering blueprints and work instructions + Install new production support equipment, ground support equipment, and/or launch support equipment + Maintain and install all electrical, mechanical, hydraulic, and pneumatic systems + Inspect and assess functionality of critical facility systems (cranes, elevators, compressed air, and overhead doors ) + Troubleshoot mechanical and electrical breakdowns of overhead cranes, overhead doors , and air compressors + Adjust mechanical parts using hand and machine tools + Fabricate parts for repairs and machine upgrades + Conduct routine maintenance and safety checks + Source replacement parts and liaison with vendors + Communicate and schedule production impacts with the production team + Prepare and submit maintenance reports + Repair broken or leaking plumbing to avoid damage and restore full use of affected system (compressed air, water, or hydraulic) + Identify and troubleshoot damaged electrical wiring + Assist HVAC team in maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly when surges of workload occur + Fixing potential safety hazards to avoid injuries + Demonstrates the ability to safely lead energized work. INDUSTRIAL MAINTENANCE TECHNICIAN (STARLINK) - 2ND SHIFT - LEVEL 4/5 The Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems , and overhead doors by third-party contractors to support the production of Starlink.

Lynnwood, WA30+ days ago

$22.26–$27.45 Per Hour

Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

New!

Everett, WA3 days ago

$21–$24 Per Hour

3:20pm-1:50am Pay: $21.00-$24.00 DOE Royell Manufacturing is an independent company and global supplier of structural airplane parts such as precision components, kits and assemblies for the aerospace industry. Products are machined and fabricated from aluminum, titanium and specialty alloys for large commercial, regional and business aircraft programs.

Kirkland, WA24 days ago

Shifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.

Kirkland, WA22 days ago

About the team The Liaison Engineering team is part of the Amazon Leo Structural Integrity and Analysis teams (Structural Analysis, Loads and Dynamics, Materials and Processes and Reliability) that is ultimately responsible for Integrity of not only the spacecraft but all other commodities supporting the program, inside and outside of the Mechanical Engineering group. In this role, you'll join Amazon Leo's Structural Integrity and Analysis team as a Liaison Engineer to innovate and solve engineering issues that arise during Amazon Leo production operations leading to every flight of our constellation of satellites.

Kirkland, WA15 days ago

Basic Qualifications - Bachelor's degree or equivalent - 2+ years of professional experience leading a team - 5+ years of hands-on experience in mechanical or electrical hardware assembly, test, and/or installation - Must be able to work 2nd shift hours (5pm to 3:30am, Sun-Wed or Wed-Sat) Preferred Qualifications - Experience hiring, training and leading production teams. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.

Redmond, WA20 days ago

$22–$26.50 Per Hour

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.

Redmond, WA19 days ago

$22–$26.50 Per Hour

BASIC QUALIFICATIONS: + High school degree or equivalency certificate + 1+ years of hands on work experience PREFERRED SKILLS AND EXPERIENCE: + 2+ years of hands-on experience working in an electro-mechanical manufacturing company, a precision manufacturing company, or high-volume manufacturing company + Ability to read, interpret, and work from layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists. + Able to proficiently use a PC, Microsoft Windows, and Microsoft Office suite + Excellent communication and organizational skills + Experience with electrical wiring + Experience setting up and running tests and experiments + Associate degree ADDITIONAL REQUIREMENTS: + Willing to work all shifts, overtime and weekends as needed.

Redmond, WA12 days ago

$34–$40 Per Hour

RESPONSIBILITIES: + Optimize PCBA manufacturing processes including paste print, pick-and-place, reflow, conformal coating, selective soldering, board wash, and inspection (X-ray, AOI, SPI, visual) + Program, configure, and improve automated SMT equipment to maximize yield and throughput + Design custom fixtures and tooling to improve process efficiency and ergonomics + Perform Design of Experiments (DOE) and data analysis to drive process capability and yield improvements + Train and mentor technicians on advanced equipment operation and troubleshooting + Rapidly triage and resolve production issues while protecting design integrity and schedule + Define equipment requirements and support validation for next-generation PCBA processes + Identify and execute continuous improvement projects targeting yield, cycle time, and cost + Partner closely with design engineering teams to provide real-time manufacturability feedback + Execute new product introduction (NPI) for PCBA assemblies across multiple work centers + Work with external support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2+ years of troubleshooting technical problems in a manufacturing environment PREFERRED SKILLS AND EXPERIENCE: + Bachelor's degree in an engineering, math, or science discipline + Ability to thrive in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems + Software development, professional application power user, or competitive video gaming skills + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Ability to collect and analyze data to improve processes and quality + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $34.00 - $40.00/hour SMT Specialist /Level 2: $38.00 - $45.00/hour SMT Specialist /Level 3: $42.00 - $51.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

New!

Redmond, WA6 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Support production engineering during development and pre-production phases by building, assembling, and testing pre-production, qualification, and flight PCBA hardware + Assist with initial PCBA line setup, equipment programming, qualification of test setups, and transition of new designs into production + Program, load, and operate automated SMT production machines including pick & place, reflow ovens, stencil printers, conformal coating, AOI, and X-ray systems + Operate and troubleshoot SMT equipment (pick & place, reflow ovens, stencil printers, conformal coating, AOI, X-ray) with a focus on process stability and yield improvement + Perform rework and recovery on non-conforming hardware while maintaining design integrity and documenting root causes + Support continuous improvement projects including test rack builds, factory automation, and production line enhancements + Thoroughly document processes, failures, and improvements using data to drive corrective actions and yield increases + Provide surge support for critical production, qualification, or development builds + Collaborate with engineers to give real-time feedback on manufacturability, DFM opportunities, and process issues + Assist with training of junior technicians on SMT equipment operation and basic troubleshooting + Work with production support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ years of hands-on experience in SMT/PCBA manufacturing, assembly, or test PREFERRED SKILLS AND EXPERIENCE: + Associates degree, apprenticeship, or military electronics technician training + Experience working directly with engineers in development or new process introduction (NPI) environments + Hands-on experience programming and optimizing SMT processes (pick & place, reflow, conformal coating, through-hole, AOI, or X-ray inspection) + Proficiency reading and interpreting schematics, assembly drawings, Gerber files, and work instructions + Soldering experience with IPC-A-610 or J-STD-001 certification (Class 2 or 3) + Strong troubleshooting and problem-solving skills with minimal supervision + Proficient with Microsoft Excel, Word, PowerPoint, and basic ERP systems + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION AND BENEFITS: Pay range: Production Development Technician/Level 1: $23.00 - $29.00/hour Production Development Technician/Level 2: $28.00 - $34.50/hour Production Development Technician/Level 3: $33.00 - $40.00/hour The ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities.

New!

Woodinville, WA6 days ago

$34–$40 Per Hour

RESPONSIBILITIES: + Install and repair Starlink products for Aviation systems under strict FAA, Warp and other governing guidelines + Operate, collect and report data of test findings for a wide variety of tests, including but not limited to: vibration, shock, thermal, RF, load and any other needed testing to meet FAA certification requirements + Create and document test processes utilizing Test Plan, TestX and Warp related features + Design, procure and perform mechanical and electrical assembly, activation of mission-specific development and continuous-integration test systems for all of Starlink aviation platforms + Drive troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues + Ensure product quality and conformance to specifications + Work closely with development and design engineers, machine shops and external partners on a wide variety of assignments BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 2 years working in an electrical or mechanical test/integration environment; OR a bachelor's in a STEM field PREFERRED SKILLS AND EXPERIENCE: + Experience working on aircraft or with aviation/aerospace related hardware + A&P certification + Inspection authorized (IA) certification + Bachelor's degree or 3+ years' experience in related field + Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists + Hands-on experience performing installation work on aircraft. + Hands-on experience fabricating harnesses, electro-mechanical assemblies, printed circuit board assemblies, and test stations + Excellent attention to detail and an insistence on permanently correcting errors + Electromechanical build processes including iron & hot-air soldering; wire crimping and stripping; machine and hand drilling, shaping, cutting, and joining; 3D plastic printing + Electrical debug tools including multimeter, oscilloscope, spectrum analyzer, network analyze + Experience working in a variety of software environments, applications, and languages including Linux, Windows, Microsoft Office, git, SVN, JIRA, Altium, Mentor PCB, NX, Bash, and Python ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed.

New!

Redmond, WA1 day ago

$23–$29 Per Hour

INDUSTRIAL MAINTENANCE TECHNICIAN (STARLINK) - 2ND SHIFT The Industrial Maintenance Technician at SpaceX works in a fast-paced environment that will oversee the installation and maintenance of our heavy industrial equipment such as cranes, compressed air systems , and overhead doors by third-party contractors to support the production of Starlink. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Lynnwood, WA30+ days ago

$25.61–$32.80 Per Hour

Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in high paced work environment in a high-volume setting. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

Lynnwood, WA30+ days ago

$20.76–$28.97 Per Hour

Abilities:Accurate color vision, near vision, and depth perception and other vision capabilities required;Manipulative skills, including finger and manual dexterity;Adept hand-eye coordination and arm-hand steadiness;Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams;Ability to work well in high paced work environment in a high volume settingEducation/Certification:High School diploma or equivalent;Fine soldering certificate or equivalent experience. + Skills:Strong verbal and written communication;Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language;Basic computer skills (understandingofbasic software).

Lynnwood, WA30+ days ago

$32.30–$41.78 Per Hour

The R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.

Lynnwood, WA30+ days ago

$25.15–$34.18 Per Hour

Preferred Qualifications:** + Ability to coach and mentor as well as have input into employment process + Ability to do part marking, wrapping and packaging finished goods and transport to other work areas + Ability to ensure all paperwork is completed appropriately and close work orders + Ability to perceive and pre-determine sequence of operations and installation requirements from sketches and oral instructions + Experience maintaining equipment on a stringent calibration schedule + IPC solder rework certification + Designated Inspection certification **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions.

Lynnwood, WA30+ days ago

$21.64–$30.30 Per Hour

Assemble parts or units, and position, align, and fasten units to assemblies using hand or power tools, such as soldering irons, solder suckers, wire strippers, high voltage soldering irons, resistance (module) welders, bench spot welders, nut drivers, torque wrenches, drill presses, sanders, and microscope. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Jobs in Lynnwood, WA

Jobs

Cannabis Production Worker 2nd ShiftGreen Revolution

Counselor Full Time 2nd shiftHeadway

Laminator I - 2nd ShiftSekisui Aerospace

Aerospace Assembler I - 2nd ShiftSekisui Aerospace

Aerospace Assembler II - 2nd ShiftSekisui Aerospace

Production Supervisor 2nd ShiftSekisui Aerospace

Paint Prepper II - 2nd ShiftSekisui Aerospace

Machinist Weekday 2nd ShiftBlue Origin LLC

Additive Manufacturing Machine Technician (2nd Shift)Blue Origin LLC

Print Production Associate (2nd shift) - Seattle, WAXerox Corporation

Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift - SCISafran

Bonder 2nd shift $1.25 per hour shift premium Train on 1st Shift - SCISafran

CNC Laser Operator - C ShiftBlue Origin LLC

Production Test Technician, 2nd Shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2025-127)Astronics

Sr. Production Test Technician - 2nd ShiftProtingent

Production Inspector, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-059)Astronics

Test Engineering Technician, 2nd Shift (Mon - Thurs 3:00 pm - 1:30 am) (2026-048)Astronics

Supervisor, Precision Machining (Starlink) - 2nd ShiftSpaceX

HDF Operator, 2nd Shift $1.25 per hour shift premium - SCISafran

Bagger Operator 2nd Shift $1.25 Shift Premium - SCISafran

Structures Mechanic Ceilings 2nd Shift $1.25 per hour Shift Premium - SCISafran

Cascade Tool Prep 2nd shift $1.25 per hour shift premium - SCISafran

HDF Operator 2nd Shift $1.25 per hour shift premium - SCISafran

Cascade Tool Prep 2nd shift $1.25 per hour Shift Premium - SCISafran

Sealant Operator 2nd Shift $1.25 per hour shift premium - SCISafran

Production Associate - 2nd ShiftKerry

CNC MACHINIST (2nd SHIFT)Royell Manufacturing, Inc.

Production Machinist (Starlink) - 2nd ShiftSpaceX

Production Machinist (Starlink) - 2nd Shift - Level 4/5SpaceX

CMM Programmer (Starlink) - 2nd ShiftSpaceX

Receiving Specialist (Starlink) - 2nd ShiftSpaceX

Inventory Specialist (Starlink) - 2nd ShiftSpaceX

Integration Technician (Starlink) - 2nd ShiftSpaceX

Industrial Maintenance Technician (Starlink) - 2nd Shift - Level 4/5SpaceX

Electronics Assembler- 1st & 2nd Shift (Soldering Required) (Open)Crane Aerospace & Electronics

FABRICATOR (2nd Shift)Royell Manufacturing, Inc.

Manufacturing Assembly Technician III (2nd Shift), Amazon LeoAmazon

Liaison Engineer, 2nd Shift, Amazon LeoAmazon

Production Supervisor, 2nd Shift BH, Amazon LeoAmazon

Laser Production Technician (Starlink) - 2nd ShiftSpaceX

Production Technician - 2nd Shift (Starlink)SpaceX

Manufacturing Specialist - 2nd ShiftSpaceX

Development Technician (PCBA) - 2nd Shift (Starlink)SpaceX

Integration Specialist (Starlink Aviation) - 2nd ShiftSpaceX

Industrial Maintenance Technician (Starlink) - 2nd ShiftSpaceX

Electronics Assembler III (2nd Shift)Crane Aerospace & Electronics

Cleanroom Assembler II-IV (Soldering Technician) -2nd ShiftCrane Aerospace & Electronics

Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftCrane Aerospace & Electronics

Electronics Assembler II (2nd Shift)Crane Aerospace & Electronics

Cleanroom Assembler II-Soldering Technician (Contract to Hire)- 2nd shiftCrane Aerospace & Electronics

Resume Resources