NewBattery/ Pack Systems Engineer QuantumScape CorpBattery/ Pack Systems EngineerSan Jose, CA$136,700–$208,500 / yearCo -develop charge/discharge profiles with the firmware engineer - CC-CV curves, temperature-dependent rate limits, fast-charge protocols, and float/maintenance charge strategies optimized for data center duty cycles. As Battery / Pack Systems Engineer, you own everything from cell to pack - mechanical integration, BMS architecture, thermal management of the battery section, charge/discharge optimization, safety engineering, and cycle life validation.
Mechanical Harness Engineer, New Programs Engineering Tesla IncMechanical Harness Engineer, New Programs EngineeringFremont, CA$91,600–$164,400 / yearNew Programs Engineers interact with cross-functional partners from the Design, Vehicle Engineering, Powertrain Engineering teams and others to develop 3D designs, mules, prototypes, and demonstrators used for informing downstream engineering efforts. Demonstrated effectiveness in handling multiple priorities, proactively organizing workloads, and meeting tight delivery timelines Excellent communicator, resourceful, and mindful of time management.
Sr. Reliability Engineer, Thermal & Mechanical, Energy Products Tesla IncSr. Reliability Engineer, Thermal & Mechanical, Energy ProductsPalo Alto, CA$91,600–$195,600 / yearAnalyze lab test data and field data to identify reliability trends, forecast reliability estimates utilizing statistical analysis (e.g., Weibull analysis, physics of failure models) and recommend design improvements. Closely collaborate with cross-functional teams, including test, reliability data science, design, architecture modeling, service, and quality to identify potential reliability issues and drive the corrective actions.
Sr. Mechanical Systems Engineer, Efficiency, Drive Systems Tesla IncSr. Mechanical Systems Engineer, Efficiency, Drive SystemsPalo Alto, CA$130,400–$195,600 / yearRun efficiency trade studies across the drive unit (motor and magnet design, gear mesh and bearing selection, lubrication architecture, thermal and pump strategy), grounded in measured data, with clear range and cost impact. Our world-class engineering teams operate with a non-conventional automotive product development philosophy of high interdisciplinary collaboration, flat organizational structure, and technical contribution at all levels.
BIM Senior Engineer I, Civil Structures (Revit Focused) Kairos PowerBIM Senior Engineer I, Civil Structures (Revit Focused)Alameda, CARemote$140,000–$165,400 / yearKairos Power is seeking a highly motivated and experienced BIM Senior Engineer I, Civil Structures with a strong background in Revit to lead the implementation and management of Building Information Modeling (BIM) for our diverse civil structures projects. Oversee the BIM process on multiple civil structures projects, from initial planning and design through to construction and as-built documentation, ensuring Revit models are accurately developed and maintained throughout the project lifecycle. .
Sr. Manufacturing Engineer, Line Design, Geartrain Tesla IncSr. Manufacturing Engineer, Line Design, GeartrainPalo Alto, CA$91,600–$234,000 / yearDesign and develop detailed cell and production line layouts for each gearbox, including placement of machinery and their integration to the mainline, workstations, material flow paths, utilities, and storage areas to optimize production processes and efficiency. Use CAD software and simulation tools (e.g., AutoCAD, FactoryCAD, or similar) to create 2D/3D models, floor plans, and detailed drawings that support both main production line and also supporting areas within Geartrain Manufacturing Scope.
Applications Engineer, Hardware Design, Energy Products Tesla IncApplications Engineer, Hardware Design, Energy ProductsPalo Alto, CA$109,600–$195,600 / yearMembers of our team display a rock-solid work ethic, are team oriented, creative, passionate, and desire to drive the adoption of sustainable energy at scale. Ability to flexibly apply product expertise and technical reasoning to a variety of projects and processes is a must, along with excellent written and verbal communication.
Senior Principal Engineer, Hardware Application Engineering — Board & System Design PhizenixSenior Principal Engineer, Hardware Application Engineering — Board & System DesignSanta Clara, CA$200,000–$250,000 / yearStrong experience owning the complete board design lifecycle, including architecture, schematic design, layout guidance, board bring-up, and validation. 7+ years of board and system design experience supporting high-speed platforms with 25G NRZ to 112G/224G PAM4 SerDes .
Sr. Manufacturing Test Engineer - (Electro-Mechanical Systems) Nextpower IncSr. Manufacturing Test Engineer - (Electro-Mechanical Systems)Fremont, CA$170,000–$190,000 / yearThe ideal candidate will drive Design for Test (DFT), oversee tester development through Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), and ensure production test systems are capacity-optimized, change-controlled, and scalable to meet aggressive production yield and ramp targets. Nextpower is seeking an experienced Senior Manufacturing Test Engineer to lead the transition of New Product Introduction (NPI) test solutions into stable, scalable, high-volume mass production test systems.
Sr. Manufacturing Test Engineer - (Electro-Mechanical Systems) Nextracker Inc.Sr. Manufacturing Test Engineer - (Electro-Mechanical Systems)Fremont, CA$170,000–$190,000 / yearThe ideal candidate will drive Design for Test (DFT), oversee tester development through Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), and ensure production test systems are capacity-optimized, change-controlled, and scalable to meet aggressive production yield and ramp targets. Nextpower is seeking an experienced Senior Manufacturing Test Engineer to lead the transition of New Product Introduction (NPI) test solutions into stable, scalable, high-volume mass production test systems.
Manufacturing Engineer Onsite/Hybrid KoBold Metals CoManufacturing Engineer Onsite/HybridSan Francisco, CA$110,000–$180,000 / yearThe easy-to-find, near-surface deposits have largely been found, and the industry has chronically under-invested in new exploration technology, relying on the manual techniques of yesteryear - even as demand accelerates for copper, lithium, and other metals to build electric vehicles, renewable energy, and data centers. KoBold has proven its first discovery with materially less capital than the industry average and found one of the best copper deposits ever discovered: the copper is far more concentrated than the global average of copper mines, and this asset alone is expected to generate meaningful revenue for decades.
Senior Mechanical Hardware Engineer - ECU Connectors & Interfaces General Motors CoSenior Mechanical Hardware Engineer - ECU Connectors & InterfacesSunnyvale, CA$125,200–$192,700 / yearCoordinate closely with electrical engineers and PCB designers on connector pinout constraints, PCB attachment strategy, soldering or alternate mounting concepts, grounding paths, shielding interfaces, and packaging of high-speed and power connections into complete electromechanical systems. Own mechanical design of connector-related content from concept through production release, including connector housings, integrated or discrete headers, terminal retention features, bus bar interfaces, seals, gaskets, and attachment features to the ECU housing.
Software Engineer, Vehicle Engineering Tesla IncSoftware Engineer, Vehicle EngineeringPalo Alto, CAWork with aerodynamics engineers to evaluate the performance of the AI surrogates versus classical solvers on baseline computer aided automotive engineering tasks interpret the results and improve them. Proficiency with software engineering best practices including writing production quality code agile development API design version control CICD docker Kubernetes jenkins.
Sr. Component Engineer - (107949) SanminaSr. Component Engineer - (107949)San Jose, CA$100,000–$120,000 / yearRecognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. The component engineer plays a crucial role in the electronic supply chain ensuring the quality, reliability and performance of semiconductor electronic components, integrated circuits, passives and electromechanical components used in products.
Mechanical Application Engineer Amphenol Communications SolutionsMechanical Application EngineerSanta Clara, CAAmphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Project Management & Collaboration: Participate in multiple weekly conference calls with customers, ODMs, and internal teams throughout the development process (typically lasting a few months per project).
Senior/Staff Electrical Engineer, Dropbox ZiplineSenior/Staff Electrical Engineer, DropboxSouth San Francisco, CA$145,000–$225,000 / yearOur customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. Develop validation plans covering functional performance, power quality, electrical safety, environmental exposure, ingress, thermal cycling, vibration, ESD, EMI/EMC, cable flexing, connector life, and fault injection.
Senior Mechanical Harness Engineer Kodiak Robotics, IncSenior Mechanical Harness EngineerMountain View, CA$150,000–$185,000 / yearShould the position require, and Kodiak determines that a candidate's residence, U.S. person status, and/or citizenship status necessitate an export license, bar the candidate from the position, or otherwise fall under national security-related restrictions, Kodiak will consider the candidate for alternative positions unaffected by such restrictions, under terms and conditions set forth at Kodiak's sole discretion, or, as an alternative, opt not to proceed with the candidate's application. Nice-to-have: Experience with harness schematics and diagrams (Capital Harness Designer preferred or similar electrical CAD software) and experience designing form-boards and end-of-line test devices.
Senior Mechanical Design Engineer KLA CorporationSenior Mechanical Design EngineerMilpitas, CA$167,300–$284,400 / yearEnabling the movement towards advanced chip design, KLA's Global Products Group (GPG), which is responsible for creating all of KLA's metrology and inspection products, is looking for the best and the brightest research scientist, software engineers, application development engineers, and senior product technology process engineers. Experience/knowledge in several of these areas: opto-mechanical systems, vacuum systems, design of inspection equipment or similar instruments, motion controls, electronics, tooling & test fixture design, supplier management, new product introduction, manufacturing support.
Associate Engineer - PBCE, Building Division San Jose City CouncilAssociate Engineer - PBCE, Building DivisionSan Jose, CA$135,975.84–$172,099.20 / yearCommunicates and listens effectively and responds in an timely, effective, positive and respectful manner; written reports and correspondence are accurate, complete, well- organized, legible, concise, and in proper grammatical form; responds to statements and comments of others in a way that reflects understanding of the content and the accompanying emotion; asks clarifying questions to assure understanding of what the speaker intended, ensures consistent communication takes place within area of responsibility. Experience: Associate Engineers working in the Building Division as plan reviewers must have four (4) years of progressively responsible experience in professional civil engineering work such as, Structural Engineering or Architectural Engineering with at least two (2) years of experience in design and construction of buildings.
Mechatronics Test Engineer, Drive Systems Tesla IncMechatronics Test Engineer, Drive SystemsPalo Alto, CA$91,600–$195,600 / yearThe Drive Systems Engineering Test team at Tesla works with the drive unit design team to facilitate development of the drive unit components and subsystems such as motors, gears, and pumps. Design mechanical and electrical hardware for test equipment which facilitates the development of drive unit components (stators, rotors, gears, bearings, pumps, and structures).