Electronics Assembler II (2Nd Shift) Crane Co.Electronics Assembler II (2Nd Shift)Lynnwood, WA$22.26–$27.45 / hourAbilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in high paced work environment in a high-volume setting. Skills: Strong verbal and written communication; Good reading comprehension (understanding written sentences and paragraphs in work related documents); Basic computer skills (understanding of basic software).
Tractor/Trailer Tech 2nd shift Old Dominion Freight LineTractor/Trailer Tech 2nd shiftSeattle, WA$34.85–$38.80 / hourWhile performing the duties of the job, the employees will be exposed to various work environments which may include working with or around others while performing maintenance, working in an enclosed vehicle while performing inspections or repairs, fixing surfaces in an enclosed trailer, exposure to all weather conditions, noise levels that vary from quiet to loud and with lighting conditions that could be extremely bright or low light. + Must be able to grip with right, left or both hands to use all necessary tools, to get in and out of the forklift, holding tablet, using pallet jacks or hand trucks, controlling and pushing the buttons, holding the steering wheel, etc.
(Quality Technician)-End of Line Inspector-2nd shift Cornerstone Building Brands Inc(Quality Technician)-End of Line Inspector-2nd shiftAuburn, WA$22.50–$23.50 / hourCornerstone Building Brands' broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com.
Test Specialist Starlink - 2nd Shift Space Exploration Technologies CorpTest Specialist Starlink - 2nd ShiftRedmond, WA$34–$40 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
CNC Machinist (Starlink) - 2nd Shift SpaceXCNC Machinist (Starlink) - 2nd ShiftRedmond, WA$23–$29 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink’s utility for communities and businesses around the globe.
CNC Machinist (Starlink) - 2Nd Shift Space Exploration TechnologiesCNC Machinist (Starlink) - 2Nd ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We've only begun to scratch the surface of Starlink's potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink's utility for communities and businesses around the globe.
SMT Specialist - 2Nd Shift Space Exploration TechnologiesSMT Specialist - 2Nd ShiftRedmond, WA$34–$40 / hourProvide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Fulfillment Coordinator (Starlink Aviation) - 2nd Shift SpaceXFulfillment Coordinator (Starlink Aviation) - 2nd ShiftWoodinville, WA$22–$25 / hourTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Coordinate and execute the timely shipment of customer kits containing aviation hardware, ensuring all orders are prepared, packed, and dispatched to meet customer installation schedules and delivery commitments.
SMT Specialist - 2nd Shift SpaceXSMT Specialist - 2nd ShiftRedmond, WA$34–$40 / hourRESPONSIBILITIES: + Execute new product introduction builds across all work centers + Assist with initial PCBA line setup, facility requests, and programming of equipment + Program, load, and operates automated equipment + Design custom fixtures for PCBA to ensure efficient process flow + Train technicians to run/troubleshoot complex machines + Triage non-conforming product and drives resolution and preventative actions + Resolve production issues while ensuring design integrity, product quality, and delivery timelines + Perform process development and validation on new models in extremely aggressive timelines + Ensure the successful transition of a product's development + Identify continuous improvement opportunities for yield, performance, and cost + Define maintenance schedules and support activities + Optimize and configure processes and equipment for building surface mount electronics assemblies + Perform design of experiments (DOE) to optimize SMT process yield + Specify equipment requirements for new PCBA build processes + Develop design for manufacturability (DFM) guidelines for PCBA designs + Provide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating + Resolve production issues on the spot while ensuring design integrity allowing us to stay on schedule + Facilitate a close relationship with the engineering team during design, build, and test to provide design feedback BASIC QUALIFICATIONS: + High school diploma or equivalency certificate and 2+ years of experience working in SMT or PCBA process engineering; OR bachelor's degree in an engineering, math or science discipline PREFERRED SKILLS AND EXPERIENCE: + Strong work ethic and drive to succeed + Ability to work in a fast paced, autonomously driven, and demanding start-up atmosphere + Excellent communication skills, both written and verbal + Experience producing J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware + Hands on experience with optimizing SMT pick and place, reflow oven, conformal coating, or through hole soldering systems ADDITIONAL REQUIREMENTS: + Must be able to work all required shift hours, overtime, and weekends as needed. Estimated shift times; 2nd Shift: 3:30PM - 1:30AM + Must be able to lift 25 pounds unassisted + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position COMPENSATION & BENEFITS: Pay range: SMT Specialist /Level 1: $34.00 - $40.00/hour SMT Specialist /Level 2: $38.00 - $45.00/hour SMT Specialist /Level 3: $42.00 - $51.00/hour
Maintenance Technician 2nd Shift thyssenkrupp MaterialsMaintenance Technician 2nd ShiftAuburn, WashingtonHoliday Pay: For a 5-day 8-hour shift you will receive up to 88 hours of holiday pay, for a 4-day 10-hour shift, you will receive up to 80 hours of holiday pay, and for a 3-day 12-hour shift you will receive up to 72 hours of holiday pay depending on the date of hire and the holiday schedule posted as it changes yearly. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws, including but not limited to any such laws in the state of Washington.
Starlink Production Technician - 2nd Shift Space Exploration Technologies CorpStarlink Production Technician - 2nd ShiftRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washington$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Aerospace NAS410 NDT Inspector (Mag and Pen) - 2nd Shift Hytek FinishesAerospace NAS410 NDT Inspector (Mag and Pen) - 2nd ShiftKent, WA$21.80–$32.80 / hourThe individual in this role will be considered an Inspector Trainee until certified by the Level III NDT Responsible in each of the three disciplines of NDT Inspection performed at Hytek (Magnetic Particle, Liquid Fluorescent Penetrant, and Nital Etch) and are able to perform the work independently. Candidates must have previous NAS410 Level II certification in Fluorescent Magnetic Particle (Stationary Horizontal Wet Bench) and Fluorescent Liquid Penetrant (Methods A&B) in the Aerospace Industry, including well-documented OJT training hours.
Aerospace Assembler I - 2nd Shift Sekisui Chemical LtdAerospace Assembler I - 2nd ShiftRenton, WA$24.88–$28.88 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
CNC Machinists-Up to $30/hr-2nd Shift East End WeldingCNC Machinists-Up to $30/hr-2nd ShiftKent, WashingtonMust be self-sufficient with performing own set-ups, programming at the machine when needed, proficient with feeds and speeds, tooling, shop math and all other machining related duties. Duties: Machine quality parts from prints and work orders in a timely and accurate manner in a job shop environment with large machined parts including weldments.
2nd Shift Sandblast / Painter East End Welding2nd Shift Sandblast / PainterKent, WashingtonQuality Processes: It is the responsibility of all employees to meet our customer's quality needs and to follow the quality policy and procedures as set forth in the Quality Procedure Manual. Position Summary: The primary function of a Sandblast and Painter is to prepare and finish metal with primer and paint.
ASSEMBLY SPECIALIST- AEROSPACE (2nd SHIFT) Royell Manufacturing, Inc.ASSEMBLY SPECIALIST- AEROSPACE (2nd SHIFT)Everett, WA$21–$27 / hourASSEMBLY SPECIALIST- AEROSPACE (2nd SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $27.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name John Nguyen + Phone 425-259-9258 Ext 218 + Email JohnN@Royell.com + Installs solid and pull-type countersunk and universal head rivets, straight shank permanent fasteners using hand held and bench or floor mounted rivet squeezes, rivet pullers, hi-lok runners or wrenches resulting in installations acceptable per specification.
Electronics Assembler- 1st & 2nd Shift (Soldering Required) (Open) Crane CompanyElectronics Assembler- 1st & 2nd Shift (Soldering Required) (Open)Lynnwood, Washington$22.26–$27.45 / hourAbilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Proficient in operating software tools (ie.
Electronics Assembler- 1St & 2Nd Shift (Soldering Required) (Open) Crane Co.Electronics Assembler- 1St & 2Nd Shift (Soldering Required) (Open)Lynnwood, WA$22.26–$27.45 / hourAbilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Proficient in operating software tools (ie.