137 Results for

2nd Shift Manufacturing Jobs in Manchester, NH

Jobs

Westford, MA11 days ago

In the absence of this skill set however we will consider folks with transferable skills such as CNC experience, hands on mechanical experience, complex machine operating experience. Experience having operating optical coating vacuum deposition chambers and coating experience in an optics industry.

New!

Chelmsford, MA4 days ago

In this role, you will support the production of high-quality medical devices by performing hands-on assembly, inspection, and packaging tasks in a regulated manufacturing environment. We are seeking motivated and detail-oriented individuals to join our team as Medical Device Assemblers.

North Andover, MA11 days ago

This role is critical to improving machine performance, minimizing waste, and driving process efficiency across sheeting, coating, laminating, slitting, and rewinding equipment. The ideal candidate thrives on the production floor and enjoys solving real-time manufacturing challenges.

Westford, MA13 days ago

Has extensive hand soldering skills, specifically wire/through hole soldering. Certification a plus or expired they will re-certify if need be.

New!

Wilmington, MA2 days ago

As a Plant Operations Supervisor, you will be responsible for assisting the Plant Manager in managing total plant operations and delivering superior customer satisfaction by driving results and exceeding expectations in the key areas of safety, service, quality and cost. Individuals fraudulently misrepresenting themselves as Brambles or CHEP representatives have scheduled interviews and offered fraudulent employment opportunities with the intent to commit identity theft or solicit money.

Andover, MA11 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. Qualifications You Must Have: * Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering.

Westford, MA11 days ago

To perform set-up, tear down, and operation of Equipment in support of Printed Circuit Board Assembly Processes and Procedures in a lean manufacturing environment. You will perform basic set up and operation of SMT machinery, will take any good SMT person and will train you on there machines.

Andover, MA12 days ago

$74–$77 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • CMM programming experience for complex workpieces typically requiring 4+ axis machining centers • Demonstrated working knowledge of Creo CAD Software • Process familiarity with paint, plating, and structural assembly • Results-oriented focus on past projects to evaluate success • Demonstrated hands-on mechanical aptitude • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work individually to support team/department success • Excellent written, verbal, visual, and graphical communication skills • Possess excellent judgment and professional maturity • Knowledge and ability to apply CORE principles and technique. Qualifications You Must Have: • Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering • 5+ years of relevant experience in a similar field • Knowledge of CMM programming and workpiece holding and manual inspection methodology • 5+ years correctly interpreting engineering drawings, including ASME Y14.5 Geometric Dimensions and Tolerances as well as typical government and industry specifications • The ability to obtain and maintain a US security clearance.

Hudson, NH15 days ago

Full-time
Employee

You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.

Andover, MA12 days ago

$65–$68 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in Siemens NX and/or Creo for CAD and CAM • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organizational and time management skills • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

Andover, MA11 days ago

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. * Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

Tyngsborough, MA13 days ago

The position will be entry level with our process engineering team in one of our busiest areas, so we need an early career technical person looking to gain hands on experience with potential for long term support depending on how our business evolves in 2026. You will assists the Process Engineers in achieving or exceeding predicted process and product development, capabilities, yields, OEE and continuous improvement projects.

Exeter, NH10 days ago

Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. C/A Design is an Innovator and leader in the Brazing industry providing custom engineered cooling solutions while leveraging decades of cutting edge, industry leading, brazing experience.

Exeter, NH13 days ago

Nashua, NH8 days ago

Building on over four decades of leadership and experience, Wakefield Thermal designs, manufactures, and sells thermal management products that remove excess heat generated by electronic components. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.

Hudson, NH15 days ago

Full-time
Employee

Experience doing root-cause analysis and complex debug activities on motherboard platforms (Intel server motherboard platforms is preferred). This technical role calls for a person with deep expertise in hardware-level diagnostics, as well as the vision to drive process improvement and test strategy innovation.

Andover, MA11 days ago

$70–$79 Per Hour
Temporary
Contractor
Full-time

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. • Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

Andover, MA12 days ago

$90–$95 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in NX CAM supporting medium to complex CNC programs • Demonstrated working knowledge of Creo CAD/CAM Software • Process familiarity with paint, plating, and structural assembly • Innovative mindset for continuous improvement keeping pace with advancements in technology • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills • Knowledge and ability to apply CORE principles and techniques . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

Andover, MA11 days ago

Exeter, NH13 days ago

Managing daily operations to support the on time delivery of quality parts for our valued customer base is the top priority while partnering with other top leaders in the organization on continuous improvement initiatives. Experience with TPS lean-management principals including lean daily management, machine setup reduction, manufacturing process-flow, visual shop-floor management, and continuous improvement is highly desired.

Lowell, MA11 days ago

$20–$20 Per Hour

Inspect and ensure that all equipment is calibrated and in working order; balances/scales, pipettes, mediaclave, water purification systems, etc. Documents lot numbers, calibration and serial numbers of all equipment used as well as any pre-fill QC; pH, temperature, water resistivity, TOC levels, etc.

Rochester, NH21 days ago

Position Summary: This position will be responsible to successfully perform all tasks associated with, and operate all equipment within, the bonding process (bond layup / de-flash / surface prep), in either the fan blade or fan case value streams. •*Ability to successfully perform all tasks associated with the bonding process, including kitting, bond layup, vacuum bagging, autoclave setup, surface preparation and operation and de-flash with the appropriate level of supervision.

Manchester, NH30+ days ago

Full-time

Utilize documentation such as Bill of Materials, product flow charts, work orders, check sheets, visual aids, production reports and assembly drawings to assemble product and record results. Utilize small hand tools (both manual and electric), manual presses, assembly fixtures, calibrated instruments, measurement equipment, microscopes, and test fixtures.

Nashua, New Hampshire18 days ago

$19.80–$19.80 Per Hour

Operate production press (load/unload parts, use push‑button and dial controls). This is a contract‑to‑hire opportunity paying $19.80/hour, where employees will be cross‑trained in press operation and bonding.

Nashua, NH30+ days ago

Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety guidelines. Position requires cross functional collaboration with procurement, machining, weld, paint and quality departments to drive safety, meet quality and delivery requirements, and ensure efficiency to meet cost targets.

Andover, MA13 days ago

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

Andover, MA13 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. The candidate will define materials, develop work holding solutions, create multi-axis CNC machining programs, develop inspection plans, and create process instructions for operators to follow.

Andover, MA13 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. The candidate will define materials, develop work holding solutions, create multi-axis CNC machining programs, develop inspection plans, and create process instructions for operators to follow.

Andover, MA13 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. The candidate will define materials, develop work holding solutions, create multi-axis CNC machining programs, develop inspection plans, and create process instructions for operators to follow.

Rochester, NH30+ days ago

Job Overview: The supervisor reports directly to the Production Manager and has responsibility for managing the production in accordance with company guidelines and within customer specifications;ensures production, efficiency, quality, and safety;supervises, motivates, and directs a team of 15 to 20 employees in a high-paced work environment;plans materials, manpower, and equipment utilization during his/her assigned shift. Direct the production workforce for a given shift in the manufacture of ceramic fiber products toward specified schedules, productivity, and quality objectives.

Hudson, New Hampshire13 days ago

$19.80–$22 Per Hour

We're working with a small, well‑established manufacturing company in Hudson that's looking for reliable, hands‑on team players to join their second shift crew. If you like staying busy, learning new skills, and being part of a tight‑knit team where your work truly matters, this could be a great fit!

Concord, NH30+ days ago

Full-time

Prototek is hiring a Finishing Specialist I to support sheet metal production by ensuring parts are properly finished, marked, assembled, and prepared for delivery. Must meet ITAR U.S. Person requirements – Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities.

Bedford, NH30+ days ago

$52,000–$57,000 Per Year

By providing your phone number, you consent to: (1) receive automated text messages and calls from the Judge Group, Inc. and its affiliates (collectively "Judge") to such phone number regarding job opportunities, your job application, and for other related purposes. Description: A 2nd‑shift Production Technician is needed to support the fabrication of antenna products, requiring production and soldering experience across a variety of manufacturing processes.

Tyngsborough, MA21 days ago

Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. The company is very passionate about producing world-class marketing, high quality, innovative products, delivering unprecedented customer experiences, having cutting-edge operations, and curating an amazing company culture & thriving work environment.

New!

Andover, MA6 days ago

$80–$89 Per Hour
Full-time

The candidate will define materials, develop work holding solutions, create multi-axis CNC machining programs, develop inspection plans, and create process instructions for operators to follow. Strong knowledge of high-speed machining techniques, cutting tool technology, and machine tool capabilities to develop best in class CNC programs.

Salem, NH28 days ago

Frequent (70% -80% of a 8-hour day) grasping of small hand tools The amount of time spent doing any of the above can change upon work demand. Experience & Required Skills: Production AssemblerMinimum of 2 years experience in a production/assembly environment.

Manchester, NH30+ days ago

Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety guidlines. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals.

Rochester, NH30+ days ago

2. Obtaining necessary samples from the dry end of the rotoformer to support required testing of materials manufactured on the rotoformer. 4. Timely communication to the operations team of out-of-specification materials during production of materials on rotoformer.

Rochester, NH30+ days ago

Job Description Company brings together two of the world’s leading specialty materials companies to create one new, innovation-driven leader focused on battery technologies, filtration media, and specialty insulation and sealing materials. Through global reach and breakthrough inventions, we’re delivering products that enable the world to breathe easier, live greener, and go further than ever before.

Manchester, NH30+ days ago

Full-time

Excellent communication skills with managers, employees and vendors while delivering status reports and performing maintenance and repair work, machinery installations or moves. Perform inspection of machine parts and castings utilizing various inspection techniques and equipment to assure functional performance according to drawing specifications.

New!

Contoocook, NH5 days ago

Full-time

Prototek is seeking a Laser Operator II to support sheet metal production by operating laser equipment, inspecting parts, and ensuring quality and on-time delivery. Must meet ITAR U.S. Person requirements – Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities.

Contoocook, NH20 days ago

Full-time

The CMM Programmer / Quality Inspector supports high-mix, precision manufacturing by leading advanced inspection activities and ensuring products meet strict customer and regulatory requirements. Must meet ITAR U.S. Person requirements – Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities.

Pepperell, MA21 days ago

Under minimal supervision, operate, set up, and program CNC (computer numerical controlled) machinery to manufacture metallic and non-metallic parts. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies.

Rochester, NH30+ days ago

Full-time

This includes setting up and operating machinery, knives, and dies to cut paper to specified lengths and sizes according to the converting worksheet, as well as operating control panels, chemical and air pumps, and defect detection systems. Job Description: Finishing Operator - 2nd Shift (3: 00pm - 11: 00pm) Summary: The Finishing Operator position involves a wide range of responsibilities focused on supporting the production process and ensuring efficient, high-quality output.

Pepperell, MA21 days ago

$22–$26

The CNC Machinist 2 operates under minimal supervision, operating CNC (computer numerical controlled) machinery to manufacture metallic and non-metallic parts. Understands and observes all necessary safety procedures, including the use of personal protective equipment (PPE) as designated in the specific work area assigned.

Hudson, New Hampshire15 days ago

$19.80–$22 Per Hour

Manchester, NH30+ days ago

This role is ideal for experienced CNC machinists capable of performing independent setups, executing production runs, and contributing to mission-critical defense programs supporting the U.S. Navy submarine industrial base. GSM’s equipment includes Doosan VTLs, Mori SL and CL2000 series lathes, Okuma LB4000 EX II, ProtoTRAK, and DMG Mori platforms — enabling the manufacture of complex components for high-precision naval and defense applications.

Rochester, NH21 days ago

The quality inspectors will demonstrate knowledge of product specification and the use of inspection tooling and/or inspection gauges to complete product inspections. Inspectors must read, understand, and correctly interpret drawings, worksheets, specification, and other quality related documentation.

Andover, MA13 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. Typically requires a Bachelors Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering.

Manchester, NH30+ days ago

Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Granite State Manufacturing (GSM) does not accept non-solicited resumes or candidate submittals from search/recruiting agencies unless GSM requests such resumes, and the search/recruiting agency is on GSM’s approved list of such agencies.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Manufacturing job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Manufacturing Jobs in Manchester, NH

Jobs

Coating Technician-Westford-2nd shiftMicro Tech

Assembler 2nd ShiftMicro Tech

Manufacturing EngineerMicro Tech

Solderers-2nd shiftMicro Tech

Operations Supervisor - 2nd ShiftCHEP

Manufacturing Engineer II - 4th shiftButler Aerospace and Defense

SMT Operator-2nd ShiftMicro Tech

Senior Manufacturing Engineer, 1st ShiftThe Computer Merchant, LTD.

Manufacturing Engineer III (NH)GCR Professional Services

Manufacturing Engineer, 1st ShiftThe Computer Merchant, LTD.

Senior Manufacturing EngineerButler Aerospace and Defense

Manufacturing Engineering Tech-TyngsboroMicro Tech

Manufacturing Engineer - Aerospace and Defense Industry!C/A Design Inc

Sr. Manufacturing Engineer - Aerospace and Defense Industry!C/A Design Inc

Manufacturing Engineer - Thermal SolutionsWakefield Thermal Solutions

Manufacturing Test Engineer (NH)GCR Professional Services

Senior Manufacturing EngineerUS Tech Solutions, Inc.

Principal Manufacturing Engineer, 4th ShiftThe Computer Merchant, LTD.

Principal Manufacturing EngineerButler Aerospace and Defense

Manufacturing Cell Leader - Aerospace and Defense Industry!C/A Design Inc

Production TechnicianNesco Resource

Composites Manufacturing Operator - 2nd ShiftSafran Aerospace Composites

Manufacturing Technician - Assembly - 2nd Shift (Temp to Perm)Merrimack Manufacturing

Manufacturing Associate 2nd ShiftUltimate Staffing Services

Manufacturing Engineer (2nd shift)Granite State Manufacturing

Senior Manufacturing Engineer, 1st ShiftApollo Professional Solutions

Senior Manufacturing Engineer, 3rd ShiftApollo Professional Solutions

Manufacturing Engineer II, 1st shiftApollo Professional Solutions

Manufacturing Engineer II, 4th shiftApollo Professional Solutions

Production Supervisor - 2nd ShiftNESC Staffing

2nd Shift Production AssociateUltimate Staffing Services

Finishing Specialist I (2nd Shift)Prototek Digital Manufacturing

Production Technician - 2nd ShiftJudge Group

Production Technician - MA (2nd Shift)Jeeter

Senior Manufacturing Engineer, 3rd ShiftLanceSoft Inc

Production Assembler - 2nd ShiftApollo Professional Solutions

Process Engineer (2nd shift)Granite State Manufacturing

Quality Control Inspector - 2nd ShiftNESC Staffing

Advanced Machine Operator - 2nd ShiftNESC Staffing

Inspector - 2nd ShiftGXO Government Services, LLC

Laser Operator II (2nd Shift)Prototek Digital Manufacturing

Senior Quality Inspector IV – CMM Programming, 2nd ShiftPrototek Digital Manufacturing

CNC Machinist III - 2nd ShiftPrince Industries LLC

Finishing Operator - 2nd ShiftNESC Staffing LLC

CNC Machinist II - 2nd ShiftPrince Industries LLC

2nd Shift Machine OperatorUltimate Staffing Services

CNC Lathe Machinist- Class B (2nd shift)Granite State Manufacturing

Quality Inspector - 2nd ShiftSpaulding Composites, Inc.

Principal Manufacturing Engineer, 4th ShiftApollo Professional Solutions

CNC Machinist - Vertical Turning Lathe (VTL) - 2nd shiftGranite State Manufacturing

Resume Resources