64 Results for

2nd Shift Production Jobs in Dunedin, FL

Jobs

New!

Oldsmar, FL3 days ago

$23–$26 Per Hour

The incumbent will assemble printed circuit boards (PCBs) using surface mount technology, perform in process inspections, and ensure that every product meets our rigorous quality and reliability requirements. * Perform manual rework and hand soldering for components that require special handling (BGAs, QFNs, fine pitch).

New!

Oldsmar, FL3 days ago

$26–$35 Per Hour

High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 10 Year of experience. Required: 10yrs experience, Assembly, Soldering, CCA Circuit Card Assembly equip repair, Locate/troubleshoot/diagnose failures/replace defective components/modules of in-line Manuf Equip.

Oldsmar, FL10 days ago

$20–$32 Per Hour

Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.

Oldsmar, FL10 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components—including bottom terminated devices such as QFNs, BGAs, and LGAs—using advanced rework equipment and X ray inspection methods. Remove, replace, and re work components, including bottom terminated devices (QFNs, BGAs, LGAs) using hot air pencils, hot plates, reflow ovens, and specialty rework stations.

New!

Oldsmar, FL3 days ago

$20–$25 Per Hour

Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes. * Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality.

New!

Oldsmar, FL4 days ago

Reviews master production schedule to determine possible and actual shortages and alerts proper authorities of potential problems. Takes appropriate action to expedite materials such as order damaged material repaired or in-house material transportation.

New!

Oldsmar, FL3 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components-including bottom?terminated devices such as QFNs, BGAs, and LGAs-using advanced rework equipment and X?ray inspection methods. Remove, replace, and re?work components, including bottom?terminated devices (QFNs, BGAs, LGAs) using hot?air pencils, hot plates, reflow ovens, and specialty rework stations.

Pinellas Park, FL20 days ago

$75,000–$92,000 Per Year
Full-time
Employee

Custom Manufacturing and Engineering Inc. is a 29-year Tampa Bay small business supporting aerospace, defense, industrial, and energy customers with custom engineered and build-to-print products as well as its own product lines. This role focuses on maintaining accurate financial records, supporting a disciplined monthly close, and ensuring consistency in how established accounting processes are executed.

New!

Gibsonton, FL5 days ago

Experienceworking in a multi-disciplinary team environment, collaborating effectivelywith diverse departments, and demonstrating strong proficiency with computersand Microsoft Office software for efficient workflow and reporting. TheProduction Supervisor with Siemens Energy Blades and Vanes division will overseemanufacturing operations, ensuring safe, efficient, and high-quality productionwhile managing the production team.

New!

Gibsonton, FL5 days ago

With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Attach pour coups to sprues with accurate orientation/spacing and visually inspect Sprues, Metal Plates, and Subcomponents for defects.

New!

Gibsonton, FL5 days ago

With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls.

New!

Gibsonton, FL5 days ago

With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. Performing basic or specifically defined maintenance operations; cooperates with maintenance technicians and/or external service providers in repair issues.

New!

Gibsonton, FL5 days ago

Your work will also impact society by helping to reduce the cost of fabrication and machining of gas turbine combustion components using our innovative manufacturing processes in the Gibsonton Florida location. In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innovate new products.

New!

Gibsonton, FL5 days ago

Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the Gibsonton Florida Location. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably.

Tampa, FL27 days ago

Working on a production line, filling containers with water and minerals. *Able to work in a hot warehouse environment*Able to stand on feet for full shift

New!

Gibsonton, FL5 days ago

With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.

Tampa, FL30+ days ago

Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies.

Tampa, FL30+ days ago

$23–$27

Oldsmar, FL30+ days ago

$23–$26 Per Hour

The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.

Oldsmar, FL30+ days ago

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Ability to work effectively in a team environment and interface diplomatically with assemblers, test technicians, engineers, customers, and management.

Oldsmar, FL20 days ago

Remove, replace, and rework components, including bottom-terminated devices (QFNs, BGAs, LGAs), using hot-air tools, hot plates, reflow ovens, and specialized rework stations. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.

Clearwater, FL30+ days ago

TempExperts is hiring motivated and skilled CNC Multi-Axis Lathe Operators for a high-growth manufacturing company in Clearwater, FL. If you have multi-axis CNC experience and want a long-term, stable career with growth potential, this is the perfect opportunity.

Clearwater, FL30+ days ago

A rapidly growing manufacturing organization in Clearwater is seeking experienced CNC Multi-Axis Lathe Operators to join their team across multiple shifts. If you take pride in producing high-precision parts and want to grow your career in a modern manufacturing environment where your skills are valued, wed love to connect with you!

Clearwater, FL30+ days ago

A rapidly growing manufacturing organization in Clearwater is seeking experienced CNC Operators with Lathe & Mill experience to join their team across multiple shifts. If you take pride in producing high-precision parts and want to grow your career in a modern manufacturing environment where your skills are valued, wed love to connect with you!

Oldsmar, FL7 days ago

Riverview, FL30+ days ago

Refer to procedures manual, sampling charts, blueprints and/or specifications to determine number of samples, specifications to check and method to testing Product Assembly Process Sheets. Consult immediate Supervisor and QA Supervisor/ Technician for clarification if questions regarding quality issues of defects, workmanship, etc. for direction and corrective action.

Oldsmar, FL19 days ago

St. Petersburg, Florida14 days ago

Operates mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; and proving part programs. Sets up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Oldsmar, FL30+ days ago

Minimum 6 years of hands-on SMT and through-hole solder assembly/rework experience; aerospace, defense, or high-reliability electronics experience preferred. Remove, replace, and repair bottom-terminated components (QFNs, BGAs, LGAs) using hot-air pencils, hot plates, and rework tools.

Oldsmar, FL30+ days ago

Full-time

Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Perform inspection activities within non‑final production cells to verify work in progress complies with engineering drawings, specifications, work instructions, and process requirements prior to final inspection.

Oldsmar, FL30+ days ago

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Minimum 2 years’ experience inspecting solder connections per IPC-A-610 and IPC-J-STD-001.

Oldsmar, FL30+ days ago

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements.

Oldsmar, FL30+ days ago

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Strong component-level troubleshooting skills (solid state, analog, and digital circuits).

Oldsmar, FL7 days ago

$26–$29 Per Hour

Oldsmar, FL7 days ago

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Minimum 2 years’ experience inspecting solder connections per IPC-A-610 and IPC-J-STD-001.

Oldsmar, FL7 days ago

$30–$62 Per Hour

Oldsmar, FL30+ days ago

Full-time

Tests and inspects products at various stages of the production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Accurately interpret engineering drawings, customer specifications, company specifications, sampling procedures, designs, forms, and instructions for recording, evaluating, and reporting quality and reliability data.

Oldsmar, FL30+ days ago

Full-time

Examples of equipment types: abrasive blasting systems, parts washers and/or aqueous cleaning lines, high temperature ovens and furnaces, material handling equipment, surface enhancement equipment, Masking of critical to quality demarcation lines with various styles of maskants. part loading/unloading, fixture assembly/disassembly, Maintaining metal coating fixtures for use in coater which includes visually verifying condition, removing residual coatings, and removing any contamination that may have affected the fixtures.

Oldsmar, FL7 days ago

$26–$32 Per Hour

Clearwater, FL9 days ago

Operating in a 60,000 sqft state-of-the-art facility, our team of 70 professionals utilizes over 20 advanced CNC machines to deliver unparalleled quality in complex machining. Company Overview: A leading precision OEM manufacturing company in the aerospace industry, is seeking dedicated individuals to join our team.

Tampa Bay, FL30+ days ago

$15–$20 Per Hour

Job Types: Assembly, Distribution, Equipment Operator, Food Production, Forklift Operator, General Labor, General Production, General Warehouse, Machine Operator, Machine Packaging, Manufacturing, Material Handler, Picker/Packer, Production, Shipping and Receiving, Warehouse, Heavy Equipment Operator. When a specific position becomes available that might be a good fit for you, you may be contacted and provided with additional details about that specific role including job details, required qualifications, and salary and benefits information.

Saint Petersburg, FL26 days ago

$14–$14 Per Hour

The baking production process involves mixing ingredients, machine operations, and packaging quality baked products, supporting the production and manufacturing of bread and pastry products. With Staff Management | SMX, you'll get a weekly paycheck, learn new skills, meet new people, and work with a great management team in a clean and safe environment.

Saint Petersburg, FL26 days ago

$13.25–$14.75 Per Hour

With Staff Management | SMX, you'll get a weekly paycheck, learn new skills, meet new people, and work with a great management team in a clean and safe environment. Perks & Benefits: Modern, high tech Environment, Weekly paychecks, Direct Deposit or Cash Card pay options, Medical / Dental Insurance, Sign on Bonus (Restrictions Apply).

Saint Petersburg, FL28 days ago

Saint Petersburg, FL19 days ago

$13.25–$14.75 Per Hour

Oldsmar, FL25 days ago

Interprets engineering prints to design processes and works with design engineering to implement production improvements. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

New!

St Petersburg, FLToday

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. + Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as lifting, balancing, walking, stooping, and handling materials.

New!

St Petersburg, FLToday

However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. **To protect our employees and those who spend time at our facilities, and as may be required by our customers, Omnicell requires most U.S. employees to be fully vaccinated for COVID-19 or obtain an approved exemption from Omnicell as an accommodation for a disability or sincerely held religious belief or practice.

New!

Gibsonton, FL5 days ago

With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls.

Tampa, FL30+ days ago

The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Production job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Production Jobs in Dunedin, FL

Jobs

Assembly/Soldering, 2nd Shift (SMT required)Butler Aerospace and Defense

Electromechanical Repair Tech, 2nd Shift (10yrs exp)Butler Aerospace and Defense

Electronics Technician - 2nd ShiftButler Aerospace and Defense

Soldering Assembler - 2nd ShiftNesco Resource

Assembler - 2nd ShiftButler Aerospace and Defense

Material Expeditor - 2nd ShiftButler Aerospace and Defense

Solder Assembler - 2nd ShiftButler Aerospace and Defense

Senior Accountant - ManufacturingCustom Manufacturing and Engineering

Production Supervisor (2nd Shift)Siemens Energy

Manufacturing Technician - Wax Assembly 2nd Shift 2pm-10pm (P)Siemens Energy

Manufacturing Technician Core Blue Dye Operator 2nd Shift 2pm to 10pm (P)Siemens Energy

Manufacturing Technician Core Impreg 2nd Shift 2pm to 10pm (P)Siemens Energy

Manufacturing Technician Visual Borescope 2nd Shift 2pm to 10:00pm (P)Siemens Energy

Manufacturing Technician Bench 2nd Shift 2pm to 10:00pm (P)Siemens Energy

Warehouse Assembly - 2nd shiftRita Staffing

Manufacturing Technician Wax Ultrasonic 2nd Shift 2pm to 10pm (P)Siemens Energy

CNC Machinist- Twin spindle/Twin Turret- 2nd ShiftPrince Industries LLC

CNC Turning Machinist- 2nd ShiftPrince Industries LLC

Assembler-2nd ShiftPlanIT Group

Cable Inspector - 2nd ShiftThe Structures Company, LLC

Solder Assembler - 2nd ShiftThe Structures Company, LLC

CNC Multi-Axis Lathe Operators (1st, 2nd & 3rd Shift)TempExperts

CNC Multi-Axis Lathe Operator (1st, 2nd & 3rd Shift)TempExperts

CNC Mill & Lathe Operator (1st, 2nd & 3rd Shift)TempExperts

Cable Inspector - 2nd ShiftThe Structures Company

Quality Control Associate (2nd Shift)The Panther Group

Solder Assembler - 2nd ShiftThe Structures Company

2nd Shift CNC MachinistPlasma-Therm

Solder Rework Assembler - 2nd ShiftThe Structures Company, LLC

QC Inspector - Non-Final Cell 2nd shiftchromalloy

Inspector - 2nd ShiftThe Structures Company, LLC

RF Electronics Technician - 2nd ShiftThe Structures Company, LLC

Electronics Test Technician - 2nd ShiftThe Structures Company, LLC

Solder Rework Assembler - 2nd ShiftThe Structures Company

Inspector - 2nd ShiftThe Structures Company

RF Electronics Technician - 2nd ShiftThe Structures Company

QC Inspector - In Process Inspection 2nd shiftchromalloy

Vapor Phase Coating - Chemical Process Operator 2nd shiftchromalloy

Electronics Test Technician - 2nd ShiftThe Structures Company

CNC Mill Operator (2nd Shift)Synerfac Technical Staffing

Light Industrial Talent Community - Warehouse, Production, ManufacturingStaff Management Solutions, LLC

Flex/Part-Time Bakery Production AssociateStaff Management Solutions, LLC

Bakery Production AssociateStaff Management Solutions, LLC

Flex/Part-Time Bakery Production AssociateStaff Management | SMX

Bakery Production AssociateStaff Management | SMX

Manufacturing Engineer (CCA & Cable Harness)The Structures Company, LLC

Card Operator I (Regular - 3rd Shift)Omnicell

Press Assistant I 3rd ShiftOmnicell

Manufacturing Technician Core Blue Light 3rd Shift 10pm to 6am (P)Siemens Energy

Manufacturing Engineer 3AEVEX

Resume Resources