298 Results for

3rd Shift Manufacturing Jobs in Lake Forest Park, WA

Jobs

New!

Kent, WA5 days ago

Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, bend, operate foot controls, and work above shoulders occasional to constant. Our philosophy of developing a close customer contact to provide prompt, responsive service and to meet our customer's changing needs allows us to be leaders within our respective industries.

New!

Kent, WA5 days ago

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. Our belief in our people and their capabilities drives our decentralized structure, which fosters entrepreneurship — a key driver of our long-term growth.

Kent, WA7 days ago

Kent, WA30+ days ago

Full-time
Employee

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility. This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.

New!

Seattle, WA2 days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Hands on experience in hardware manufacturing (i.e. tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, Manufacturing Execution Systems/Software).

Kent, WA30+ days ago

$77,968–$130,228 Per Year
Full-time
Employee

Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.

Renton, WA30+ days ago

Full-time
Employee

Experience in Manufacturing Engineering Planning systems such as Product Data Manager (PDM), Computer Aided Process Planning (CAPP), Reference Engineering Data Automated Retrieval System (REDARS), and Wire Integration Retrieval System (WIRS). This role will require collaboration with a cross-functional electrical team, which includes Manufacturing Engineers, Design Engineers, and Shop Investigators, tasked with investigating and resolving emergent factory producibility issues.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Kent, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Seattle, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. Required SkillS: * Bachelor, Master or Doctorate of Science degree required from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Renton, WA30+ days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Renton, WA30+ days ago

$100–$135 Per Hour
Full-time
Employee

Capable of designing or defining the requirements for the development of equipment, robotics, Lay-up molds, Vacuum Holding Fixtures, Shop Aids, Positioning fixtures, Go-No-Go inspection tools required for the manufacturing of new products. Essential Functions: Essential functions, including how an individual is to perform them and the frequency with which the tasks are performed; the tasks must be part of the job function and truly necessary or required to perform the job.

Redmond, WA30+ days ago

Full-time
Employee

The Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.

Mill Creek, WA30 days ago

Full-time
Employee

Execute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.

New!

Kent, WA1 day ago

$77,968–$130,228 Per Year
Full-time
Employee

Renton, WA30+ days ago

Full-time
Employee

This responsibility encompasses the entire R&D manufacturing value chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and documentation associated with the processes that the Manufacturing Engineer oversees. Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets.

Woodmont Beach, WA20 days ago

$83,250–$138,550 Per Year
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.

Redmond, WA30+ days ago

$20.52–$34.20 Per Hour
Intern
Full-time

With our wide range of technologies, including in the clean tech space, we help our customers solve their most complex engineering challenges by living our purpose: enabling engineering breakthroughs that lead to a better tomorrow. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Kent, WA30+ days ago

$77,968–$117,324 Per Year
Full-time
Employee

New!

Seattle, WA2 days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Spacecraft or launch vehicle integration experience with demonstrated technical expertise in one or more of the following areas: Fluids/Propulsion Systems, Harnessing, Electrical Power Systems, Thermal Protection Systems, Environmental Control and Life Support Systems, Integrated Vehicle Test, MGSE/EGSE.

Kent, WA30+ days ago

$63,000–$85,000 Per Year

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility. We’re looking for a hands-on, driven Operations Leader to supervise 3rd shift production and champion continuous improvement in a fast-paced environment.

Renton, WA17 days ago

Full-time
Employee

seeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Mill Creek, WA30+ days ago

Full-time
Employee

The Manufacturing Technician I is responsible for: following documented procedures, such as Manufacturing Work Instructions; performing inspections and functional tests to verify quality conformance; and following all safety protocols to perform all tasks in a safe environment. The base salary for the role will depend on a several job-related factors, including, but not limited to education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge and travel requirements for this position.

Kent, WA11 days ago

$129,150–$252,105 Per Year
Full-time
Employee

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. You will be held to the high technical bar of our manufacturing development team and will be responsible for the following: Develop capabilities in the factory that improve lead time and reliability of the launch vehicle product.

Bellevue, WA22 days ago

$138,685–$208,027 Per Year
Full-time
Employee

TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. As a result, the companys activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications all for significant human health benefits.

Woodmont Beach, WA30+ days ago

$83,250–$138,550 Per Year
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Leads capital equipment and process improvement projects end-to-end-managing scope, schedule/milestones, budget/CapEx tracking, and cross-functional coordination through installation, start-up, and closure while escalating risks/issues as needed.

New!

Bellevue, WA5 days ago

$168,316–$252,475 Per Year
Full-time
Employee

TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. The Core Components Fabrication Manager will interface extensively with the Natrium Fuel Design and Supply leadership team to ensure proper integration between functional areas to support on-time fuel load.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Bothell, WA30+ days ago

$23.58–$28.18 Per Hour
Intern
Full-time

In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance. Required Qualifications: Completed a minimum of 2-3 years of Mechanical Engineering coursework, working towards a BS in Manufacturing Engineering, Mechanical Engineering, Aerospace Engineering, or a related field.

Woodmont Beach, WA30+ days ago

$111,450–$195,150 Per Year
Full-time
Employee

Management of extensive capital project - leadership experience spanning capital equipment procurement (specification development, supplier evaluation, RFQ/RFP support, vendor selection, FAT/SAT), project management (charter, scope, schedule, risk, cost control), CapEx justification (NPV/ROI/payback aligned to strategy), and equipment/line installation, commissioning, and validation with minimal operational disruption. Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.

Woodmont Beach, WA30+ days ago

$69,500–$115,000 Per Year
Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

The role is responsible for managing the direction of the Production team across all shifts and the full breadth of the Value Stream utilizing support from Production Leads and shift Production Supervisors. Is skilled in monitoring and assessing the performance of self, other individuals, and teams to make improvements and take corrective action, creating a track record of successful leadership.

Woodmont Beach, WA30+ days ago

$69,500–$115,000 Per Year
Full-time
Employee

New!

Everett, WA1 day ago

$196,537–$294,806 Per Year
Full-time
Employee

This role provides full operational leadership for day to day production activities in GMP aligned hot cell and glovebox operations, ensuring safe, compliant, and efficient manufacturing performance. TerraPower Isotopes is seeking a Radioisotopes Manufacturing Manager to lead all aspects of actinium 225 manufacturing as an API starting material precursor for targeted radiopharmaceutical therapies.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. This multi-orbit constellation will consist of 5,408 optically interconnected satellites in low Earth orbit (LEO) and 128 satellites in medium Earth orbit (MEO), providing enterprise-grade connectivity for critical operations worldwide.

New!

Arlington, WA2 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

A Production Supervisor will be expected to perform a variety of functions which include but are not limited to managing and reporting on daily/weekly/monthly/quarterly Flex targets, tracking and planning their department's staffing needs, communicating and disseminating production targets and corporate policies from the facility's Management team down to their Hourly workforce, identifying, investigating, and resolving production and personnel issues within a fast paced, diverse work force. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys.

Redmond, WA30+ days ago

Full-time
Employee

Background in mass production across multiple processes such as miniature motorized mechanisms, soft goods cutting and laminating, kitting, active optical alignment, casting, molding, machining, electronics packaging, coatings, and additive manufacturing. The ideal candidate will have strong experience in developing and scaling novel manufacturing processes from concept to pilot-production and a proven ability to deliver reliable, high-performance hardware prototypes for future projects.

Everett, WA20 days ago

Full-time
Employee

Job Requirements.

Kent, WA30+ days ago

Full-time
Employee

Marysville, WA30+ days ago

Annual salary** $35,640.00 - $5,100.00 USD **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-177789 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 3rd Shift $2.00 per hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Use ply cutting machine and computer to cut prepreg for composite panels.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA30+ days ago

Full-time
Employee

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in the facility. Prioritizes and processes orders from certification department; verifies documentation is complete and places orders in the proper area for shipping via Hytek truck or common carrier.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 3rd Shift Manufacturing job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

3rd Shift Manufacturing Jobs in Lake Forest Park, WA

Maintenance Mechanic - 2nd or 3rd Shift Davis Wire Corporation

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WA Davis Wire Corporation

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WA Davis Wire

Production Supervisor, 3rd Shift - Aerospace Manufacturing Leadership Opportunit Hytek Finishes

Manufacturing Engineer 3 Spectraforce Technologies Inc.

Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue Origin LLC

Manufacturing Engineer - Rocket Engines Valves (Weekend Shift) Blue Origin LLC

Manufacturing Engineer 3 Hexcel Corporation

Manufacturing Planner 3 Spectraforce Technologies Inc.

Aerospace Paint Masker - 3rd Shift Hytek Finishes

Aerospace Zinc Nickel Assistant - 3rd Shift Hytek Finishes

Aerospace Abrasive Blast Operator - 3rd Shift Hytek Finishes

Aerospace Painter - 3rd Shift Hytek Finishes

Aerospace Cadmium Assistant - 3rd Shift Hytek Finishes

Manufacturing Engineer 2 Spectraforce Technologies Inc.

Advanced Composites Manufacturing Lead - 1st Shift Sekisui Aerospace

Machine Tool Manufacturing Engineer III Blue Origin LLC

Manufacturing Engineer II Sekisui Aerospace

Manufacturing Engineer III/Sr. - Design for Automation Terex Corporation

Manufacturing Production Technician Bruker Nano Inc

Manufacturing Engineer III Hexcel Corporation

Manufacturing Engineer III - Product Development Sekisui Aerospace

Manufacturing Engineer 2 (Aerospace) Parker Hannifin Corporation

Manufacturing Engineer Intern (Summer 2026) Parker Hannifin Corporation

Manufacturing Engineer II Hexcel Corporation

Manufacturing Engineer III Blue Origin LLC

Production Supervisor, 3rd Shift - Aerospace Manufacturing Leadership Opportunity Hytek Finishes

Aerospace Manufacturing Production Worker - All Shifts Sekisui Aerospace

Manufacturing Assembly Tech II Bruker Nano Inc

Manufacturing Engineer - Reliability Stoke Space Technologies, Inc.

Senior Mechanical Manufacturing Engineer TerraPower

Experienced Manufacturing Engineer (CapEx Focus) Parker Hannifin Corporation

Manager, Core Component Manufacturing TerraPower

Machining Manufacturing Engineer Blue Origin LLC

2026 Summer Intern (Manufacturing Engineer) General Dynamics OTS Inc

Senior Manufacturing Engineer (CapEx) Parker Hannifin Corporation

Manufacturing Engineer (Aftermarket) Parker Hannifin Corporation

Production Value Stream Manager - Aerospace Manufacturing Leadership Opportunity Hytek Finishes

Manufacturing Engineer (Aerospace) Parker Hannifin Corporation

Radioisotopes Manufacturing Manager TerraPower

SENIOR MANAGER - OPTICAL TEST & MANUFACTURING ENGINEERING Blue Origin LLC

Engineer - Manufacturing Castings Blue Origin LLC

Production Supervisor - Graveyard Shift Primus International LLC

Process Engineer V (Manufacturing) Bucher & Christian Consulting, Inc. dba BCforward (BCF)

Senior Manufacturing Engineer (Aerospace) Acara Solutions

Aerospace Cadmium Assistant - 2nd Shift Hytek Finishes

Kit Cut 3rd Shift $2.00 per hour shift premium - SCI Safran

Aerospace Anodize Operator - 1st Shift Hytek Finishes

Aerospace Packager - 2nd Shift Hytek Finishes

Shipping Clerk and Back Up Driver - 1st Shift Hytek Finishes

Resume Resources