139 Results for

Aerospace Jobs in Dracut, MA

Jobs

Exeter, NH12 days ago

Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. C/A Design is an Innovator and leader in the Brazing industry providing custom engineered cooling solutions while leveraging decades of cutting edge, industry leading, brazing experience.

Exeter, NH8 days ago

Exeter, NH12 days ago

Managing daily operations to support the on time delivery of quality parts for our valued customer base is the top priority while partnering with other top leaders in the organization on continuous improvement initiatives. Experience with TPS lean-management principals including lean daily management, machine setup reduction, manufacturing process-flow, visual shop-floor management, and continuous improvement is highly desired.

Exeter, NH8 days ago

Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. Since its founding over 40 years ago The Heico Companies has grown from a single business to over 80 separate companies through a strategic acquisition policy, and by reinvesting its earnings into internal growth and new prospects.

Hudson, New Hampshire30+ days ago

Contractor

You will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.

New!

Hudson, New Hampshire5 days ago

Contractor

Collaboration: Collaborate with cross-functional teams, including electrical engineers, mechanical engineers, software engineers, and project managers, to ensure successful integration of the Antennas . Testing and Measurement Equipment: Experience with Antenna/RF testing and measurement equipment, such as network analyzers, spectrum analyzers, signal generators, and oscilloscopes.

New!

Wilmington, MAToday

$184,000–$341,500 Per Year

L3Harris' Space and Airborne Systems seeks a Chief Engineer with expertise in electro-optical payloads, subsystems, and software for mid to large aperture national, civil, and commercial space systems. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Andover, MA24 days ago

$70–$79 Per Hour
Temporary
Contractor
Full-time

Self-manage workload to support existing production, perform non-recurring engineering work for new products, and drive improvement projects to completion. • Support process improvements using data analysis, application of best practices, engaging with production personnel, and implementing innovative solutions to improve process capability and decrease cost.

New!

Needham, MAToday

$80,000–$165,000 Per Year

Powered by two trusted, global brands, Shark and Ninja, the company has a proven track record of bringing disruptive innovation to market and developing one consumer product after another has allowed SharkNinja to enter multiple product categories, driving significant growth and market share gains. SharkNinja is a global product design and technology company, with a diversified portfolio of 5-star rated lifestyle solutions that positively impact people’s lives in homes around the world.

Cambridge, Massachusetts25 days ago

Contractor

Client is seeking a software engineer with an B.S. or a M.S. in Aerospace Engineering, Electrical Engineering, Systems Engineering, Computer Science or equivalent. Integration and test will include everything from unit testing, static and dynamic testing, integration and interface testing, debugging, and defect resolution.

New!

Wilmington, MAToday

$127,500–$236,500 Per Year

The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel on space applications. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Andover, MA25 days ago

$74–$77 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • CMM programming experience for complex workpieces typically requiring 4+ axis machining centers • Demonstrated working knowledge of Creo CAD Software • Process familiarity with paint, plating, and structural assembly • Results-oriented focus on past projects to evaluate success • Demonstrated hands-on mechanical aptitude • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work individually to support team/department success • Excellent written, verbal, visual, and graphical communication skills • Possess excellent judgment and professional maturity • Knowledge and ability to apply CORE principles and technique. Qualifications You Must Have: • Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering • 5+ years of relevant experience in a similar field • Knowledge of CMM programming and workpiece holding and manual inspection methodology • 5+ years correctly interpreting engineering drawings, including ASME Y14.5 Geometric Dimensions and Tolerances as well as typical government and industry specifications • The ability to obtain and maintain a US security clearance.

Andover, MA25 days ago

$90–$95 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in NX CAM supporting medium to complex CNC programs • Demonstrated working knowledge of Creo CAD/CAM Software • Process familiarity with paint, plating, and structural assembly • Innovative mindset for continuous improvement keeping pace with advancements in technology • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organization skills with ability to manage multiple tasks simultaneously • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills • Knowledge and ability to apply CORE principles and techniques . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

Andover, MA25 days ago

$65–$68 Per Hour
Temporary
Contractor
Full-time

Qualifications We Value: • 5 Axis CNC programming experience • Competency in Siemens NX and/or Creo for CAD and CAM • Demonstrated hands-on mechanical aptitude with the ability to work across disciplines • GD&T certification • Strong organizational and time management skills • Ability to work in a team setting as well as individually • Self-motivated and results oriented • Excellent written and verbal communication skills . * While an hourly range is posted for this position, an eventual hourly rate is determined by a comprehensive salary analysis which considers multiple factors including but not limited to: job-related knowledge, skills and qualifications, education and experience as compared to others in the organization doing substantially similar work, if applicable, and market and business considerations.

Andover, MA10 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. Qualifications You Must Have: * Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering.

Cambridge, Massachusetts30+ days ago

$60–$75 Per Hour
Contractor

Performs calculations, studies, and analyses to support designs such as geometric and dimensional tolerance studies, trigonometric calculations, mass property calculations and potential manufacturing, and assembly techniques. Interprets and employs conventional engineering principles, practices, guidelines, and precedents in considering design requirements including contamination, structural integrity, corrosion resistance, ground environments, coefficients of thermal expansion, machinability, weldability, formability, etc.

Woburn, Massachusetts30+ days ago

$75–$90 Per Hour
Contractor

Role can be Hybrid, TBD The Systems Engineer should have experience architecting systems, working across the Systems Engineering Lifecycle, and in Digital Engineering/Model-Based Systems Engineering (MBSE) achieving architectural integrity and traceability through requirements analysis, system and software development and production system deployment. The ideal candidate will be well-versed in Systems Engineering techniques, Modeling and Simulation, and Digital Engineering/MBSE and be excited about opportunities to mentor more junior staff and help foster growth of subject matter expertise across the organization.

Cambridge30+ days ago

Contractor

Time domain simulations, covariance-based methods, and Monte Carlo dispersed analysis will be used to assess and tune system performance and to document analysis results. The analysis will include assessment of control, navigation, and guidance system performance, verification of algorithms and algorithm requirements, and analysis of flight dynamics and trajectory dispersions.

Hudson, New Hampshire30+ days ago

$45–$58 Per Hour
Contractor

This role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.

New!

Needham, MAToday

$80,000–$165,000 Per Year

Andover, MA10 days ago

Translate engineering design requirements into formal manufacturing process documentation including raw material definition, fixturing/tooling development, CNC programming, inspection planning, finishing requirements, and assembly instructions. Qualifications: * Typically requires a Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Electrical Engineering, or Aerospace Engineering.

New!

Tewksbury, MA6 days ago

The individual comes up to speed quickly, has an impact on our projects developing test stations/fixtures/automated test software, has familiarity with a process-heavy work environment. Our projects are nearly always team-based (5-10 engineers) so attributes such as strong collaboration and communication, in addition to technical aptitude, are essential for achieving success within our department.

New!

Billerica, MA6 days ago

Chelmsford, MA10 days ago

Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.

New!

Maynard, MA4 days ago

Seabrook, NH27 days ago

$80,000–$100,000 Per Year
Full-time

ProfileBachelor's degree in Mechanical Engineering, or a related field (or equivalent experience).2+ years of mechanical engineering experience (industry or relevant project‑based work).Experience designing electronic or electromechanical products. DescriptionThe Mechanical Engineer will report directly into the Engineering Manager and be responsible for:Develop detailed mechanical designs for new products, fabrication tools, and test fixtures.

Seabrook, NH27 days ago

$80,000–$100,000 Per Year

The Mechanical Engineer will report directly into the Engineering Manager and be responsible for: Develop detailed mechanical designs for new products, fabrication tools, and test fixtures. This Mechanical Engineer will support early-stage mechanical design efforts, contributing to the development of new products, tooling, and test fixtures from concept through production.

Seabrook, NH27 days ago

$90,000–$110,000 Per Year
Full-time

DescriptionThe Manufacturing Engineer III will report directly into the Engineering Manager and be responsible for:Primary manufacturing engineering support for machining processes and equipment. You will work closely with engineering, production, and machine shop teams to improve processes, tooling, documentation, and equipment performance while driving lean manufacturing initiatives.

Seabrook, NH27 days ago

$90,000–$110,000 Per Year

You will work closely with engineering, production, and machine shop teams to improve processes, tooling, documentation, and equipment performance while driving lean manufacturing initiatives. The Manufacturing Engineer III will report directly into the Engineering Manager and be responsible for: Primary manufacturing engineering support for machining processes and equipment.

Bedford, MA18 days ago

$100,000–$140,000 Per Year
Full-time

This role plays a key part in driving continuous improvement, mentoring production teams, and supporting new product introductions while ensuring compliance with quality and regulatory requirements. DescriptionThe Manufacturing Engineer will lead efforts to develop, optimize, and sustain complex manufacturing processes in a high‑throughput, aerospace‑focused production environment.

New!

Worcester, MA1 day ago

Ideal candidates have a relevant degree or equivalent experience, 3+ years in CNC manufacturing (preferably aerospace), proficiency in multi-axis CNC programming, and strong knowledge of GD&T, tooling, and regulated environments. The Lead CNC Engineer role offers a direct impact on complex, high-precision manufacturing within a highly specialized environment supporting aerospace, defense, and communication systems.

Bedford, MA18 days ago

$100,000–$140,000 Per Year

This role plays a key part in driving continuous improvement, mentoring production teams, and supporting new product introductions while ensuring compliance with quality and regulatory requirements. The Manufacturing Engineer will lead efforts to develop, optimize, and sustain complex manufacturing processes in a high‑throughput, aerospace‑focused production environment.

Merrimack, NH27 days ago

$145,000–$170,000 Per Year
Full-time

The organization has a strong track record of steady, planned growth and is continuing to expand capabilities, teams, and technologies to support increasing demand and entry into new markets. Their products are deployed across a wide range of aerospace platforms, including space exploration, international space missions, and U.S. military applications.

Manchester, NH25 days ago

$140,000–$170,000 Per Year
Full-time

ProfileThe successful candidate is an experienced program manager with a background in manufacturing and the ability to operate confidently in customer-facing, technically driven environments. This role interfaces closely with customers and internal teams, manages financial performance, and drives clear communication across all phases of program execution.

Ayer, MA18 days ago

$60,000–$75,000 Per Year
Full-time

ProfileA successful Inside Sales / Estimator should have:Strong understanding of machine shop, aerospace, defense, or medical device processes and engineering principles. It specializes in precision laser machining and materials processing, offering both services and components to OEMs and manufacturers.

Lowell, MA18 days ago

$80,000–$100,000 Per Year
Full-time

They are comfortable balancing people leadership, production execution, and data-driven decision-making.5+ years supervising manufacturing teams in machining or heavy industry. Client DetailsOur client is a well-established, global manufacturing organization specializing in advanced metal forming solutions for highly regulated markets, including aerospace, defense, energy, and medical systems.

Merrimack, NH27 days ago

$145,000–$170,000 Per Year

Lowell, MA18 days ago

$80,000–$100,000 Per Year

Our client is a well-established, global manufacturing organization specializing in advanced metal forming solutions for highly regulated markets, including aerospace, defense, energy, and medical systems. The position plays a critical role in workforce leadership, production execution, ERP coordination, and driving performance against safety, quality, and delivery metrics.

Manchester, NH25 days ago

$140,000–$170,000 Per Year

This role interfaces closely with customers and internal teams, manages financial performance, and drives clear communication across all phases of program execution. The successful candidate is an experienced program manager with a background in manufacturing and the ability to operate confidently in customer-facing, technically driven environments.

Ayer, MA18 days ago

$60,000–$75,000 Per Year

A successful Inside Sales / Estimator should have: Strong understanding of machine shop, aerospace, defense, or medical device processes and engineering principles. It specializes in precision laser machining and materials processing, offering both services and components to OEMs and manufacturers.

Exeter, New Hampshire17 days ago

The Quality Control Inspector performs independent inspection of machined and brazed aluminum components and assemblies used in Aerospace and Defense applications, with a focus on completing FAI (First Article Inspection). Works with Quality Assurance representatives to complete other required reports (e.g., PPAP, PFMEA, etc.), Identify workmanship or material defects and initiate Non-Conforming Material Reports (NCMR).

Nashua, NH16 days ago

Full-time

OEM Logistics, LLC was founded in January 2023 by two industry veterans with a proven track record of success identifying outside the box niche solutions that address the supply chain challenges within the aerospace & defense industry. OEM delivers proactive supplier management solutions for the major Primes and Tier-1’s across the aerospace, defense, and shipbuilding sectors.

Seabrook, NH13 days ago

Will-Mor Manufacturing delivers precision CNC solutions for aerospace and defense, producing complex, tight-tolerance parts. Hands-on CNC experience; exposure to CNC Turning Centers up to 12 turrets and CNC Mill machines.

Exeter, New Hampshire12 days ago

Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms.

Newton, MA30+ days ago

$130,000–$150,000 Per Year

This role is designed as a near-term leadership position with the opportunity to expand into a broader senior leadership role (Director, Program Management & Planning) as the business and aerospace market portfolio grow. High performers will be positioned for advancement into a Director-level or higher role leading Program Management and Planning across the Aerospace & Defense market segments.

New!

Malden, MA1 day ago

The Lead Aerospace Quality Inspector performs in-process, final, and 1st article inspections of jet engine parts and sheet metal fabrications for aerospace manufacturing. Qualifications include 5+ years in aerospace quality inspection, proficiency in blueprint reading, GD&T, and measuring equipment.

Lexington, MA30+ days ago

As an SRP intern, you’ll engage in hands-on research, receive dedicated mentorship, and take part in professional development opportunities including workshops, tech talks, and networking events—all while building connections within a vibrant community of peers. Housing support is available for eligible non-local interns, including access to discounted university housing in Boston and a one-time taxable relocation payment.

Lexington, MA11 days ago

$25–$32 Per Hour

The group seeks a program intern to assist specialist and technical staff members with cutting-edge CAD modeling to aid research and program execution in the Mechanical/Aerospace engineering. In addition to specific technical tasks, an employment experience at Lincoln Laboratory offers: The opportunity to generate real-world impact to national security and broader society through your work on challenging technology problems.

Lexington, MA25 days ago

$116,400–$140,000 Per Year

Examples include the development of structural-material systems for space-based imaging and laser communication terminals, thermal management solutions spanning cryogenic to hypersonic applications, and aerodynamic designs and assessments to support unmanned aerial vehicles, airborne pods, and hypersonic platforms. Our engineers support a broad range of simulation, design, optimization, and test activities, and we develop innovative simulation capabilities to solve challenging engineering design problems across a broad array of applications ranging from low-speed aircraft to hypersonic systems and satellite design.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Aerospace job opportunities. Plus, receive relevant job recommendations in your inbox.

Aerospace Jobs in Dracut, MA

Sr. Manufacturing Engineer - Aerospace and Defense Industry! C/A Design Inc

Manufacturing Engineer - Aerospace and Defense Industry! C/A Design Inc

Manufacturing Cell Leader - Aerospace and Defense Industry! C/A Design Inc

CNC Machinist - Aerospace & Defense industry! C/A Design Inc

Manufacturing Engineer III (NH) GCR Professional Services

RF Engineer III (NH) GCR Professional Services

Director, Systems Engineering - Agile EO (Electro-Optical) Chief Engineer : Sign-on bonus ($50K max) L3Harris Technologies

Senior Manufacturing Engineer US Tech Solutions, Inc.

Mechanical Engineering Manager SharkNinja

Flight Software Engineer GCR Professional Services

Lead, Systems Engineer (Space Systems) - MBSE : Sign-on bonus ($30K max) L3Harris Technologies

Senior Manufacturing Engineer, 1st Shift The Computer Merchant, LTD.

Principal Manufacturing Engineer, 4th Shift The Computer Merchant, LTD.

Manufacturing Engineer, 1st Shift The Computer Merchant, LTD.

Manufacturing Engineer II - 4th shift Butler Aerospace and Defense

Mechanical Designer GCR Professional Services

Model-Based Systems Engineer (MBSE) GCR Professional Services

GNC SYSTEMS ANALYST ENGINEER GCR Professional Services

Quality Engineer III (NH) GCR Professional Services

Engineering Manager, R&D SharkNinja

Principal Manufacturing Engineer Butler Aerospace and Defense

Senior Manufacturing Engineer Butler Aerospace and Defense

STS Senior Test Development Engineer P2 Butler Aerospace and Defense

STS Senior Test Development Engineer P3 Butler Aerospace and Defense

System Integration Test Engineer Butler Aerospace and Defense

Systems Integration/Test Engineer Butler Aerospace and Defense

Mechanical Engineer - Aerospace - Seabrook, NH Michael Page International

Mechanical Engineer - Aerospace - Seabrook, NH Michael Page

Manufacturing Engineer III - Aerospace - Seabrook, NH Michael Page International

Manufacturing Engineer III - Aerospace - Seabrook, NH Michael Page

Manufacturing Engineer - Aerospace - Bedford, MA Michael Page International

Lead CNC Engineer - Aerospace - Worcester, MA Michael Page International

Manufacturing Engineer - Aerospace - Bedford, MA Michael Page

Program Manager - Aerospace - Merrimack, NH Michael Page International

Program Manager - Aerospace - Manchester, NH Michael Page International

Inside Sales - Metal Fab & Aerospace - MA Michael Page International

Manufacturing Supervisor - Aerospace - Lowell, MA Michael Page International

Program Manager - Aerospace - Merrimack, NH Michael Page

Manufacturing Supervisor - Aerospace - Lowell, MA Michael Page

Program Manager - Aerospace - Manchester, NH Michael Page

Inside Sales - Metal Fab & Aerospace - MA Michael Page

Quality Inspector - Aerospace and Defense Industry! C/A Design Inc

Aerospace and Defense Supplier Specialist OEM Logistics LLC

Aerospace/Defense CNC Machinist — Mills & Lathes Global Precision Products

Straightener - Aerospace & Defense Industry! C/A Design Inc

Program Manager – Aerospace & Defense Systems Giner, Inc.

Aerospace Quality Inspector Lead Enjet Aero

Group 07-75 | SRP Intern - Software/AI Engineering | Systems Engineering - | Summer 2026 (Lexing... MIT Lincoln Laboratory

CAD Design Specialist CO-OP | Group 07-71 | June - November 2026 MIT Lincoln Laboratory

AI/ML Engineer for Multidisciplinary Engineering Design-Associate Staff MIT Lincoln Laboratory

Resume Resources