JobotNewPropulsion Engineer JobotPropulsion EngineerLittleton, CO$150,000–$210,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications.
ArcfieldAerospace Engineer III ArcfieldAerospace Engineer IIILouisville, ColoradoThere are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Headquartered in Chantilly, VA with 16 global offices, Arcfield employs more than 1,500 engineers, analysts, IT specialists, and other professionals with more than 60 years of collective proven experience supporting missions in cyber and space defense, space exploration, hypersonic and nuclear deterrence and warfighter readiness.
ArcfieldAerospace Flight Software Test Engineer ArcfieldAerospace Flight Software Test EngineerGreenwood Village, ColoradoThere are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Join a team of highly skilled engineers (ROCKET SCIENTISTS!) performing Software Independent Validation and Verification (IV&V) tasks for payloads launching on ULA Vulcan, SpaceX Falcon 9 and potentially other New Entrant launch vehicles.
ALTEN Technology USAElectrical Engineer (aerospace/medical devices) ALTEN Technology USAElectrical Engineer (aerospace/medical devices)Westminster, CO$90,000–$115,000 / yearAs a member of our electrical team, you will work in multi-disciplinary project teams to architect and develop systems for a wide variety of markets including consumer products, medical devices, space systems, unmanned aerial vehicles, and industrial controls. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
ALTEN Technology USAManager of Sales Operations & Performance - Aerospace & Defense ALTEN Technology USAManager of Sales Operations & Performance - Aerospace & DefenseWestminster, CO$90,000–$125,000 / yearJob Purpose: ln collaboration with the Global Account Managers (GAM) and the Business Units, the Director Salesops and Performance (DSP) coordinates the Sales activity for dedicated market sector(s) and set of Global Customers in each geography to achieve annual sales ambitions in top line growth, market share and profitability. We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles.
XometrySenior Solutions Engineer - Aerospace and Defense XometrySenior Solutions Engineer - Aerospace and DefenseDenver, CO$101,000–$150,000 / yearXometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery.
XometrySenior Solutions Engineer, Aerospace & Defense XometrySenior Solutions Engineer, Aerospace & DefenseDenver, CO$101,000–$150,000 / yearXometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery.
Davis ManufacturingAerospace Quality Inspector Davis ManufacturingAerospace Quality InspectorArvada, COFull timeDuties and Responsibilities:Mechanical Dimensional Inspection: Utilize precision hand tools—including calipers, micrometers, height gauges, bore gauges, and indicators—Run CMM programs — to verify tight-tolerance features and internal diameters against engineering blueprints. Fluorescent Penetrant Inspection (FPI): Training provided to perform high-sensitivity Liquid Penetrant Testing (PT) on complex, multi-axis machined parts to detect discontinuities in aluminum, titanium, and advanced aerospace alloys.
Keysight Technologies, Inc.Engineering Manager, Aerospace Defense Custom Solutions Keysight Technologies, Inc.Engineering Manager, Aerospace Defense Custom SolutionsLoveland, ColoradoThe SCCI team will centrally own custom solutions and reusable platforms such as switch matrices, calibration modules, RF signal conditioning assemblies, PCAs, and associated firmware / software / FPGA programming, enabling greater reuse, quality, scalability, and faster system delivery. Keysight Technologies is seeking an experienced Engineering Manager to lead a Signal Conditioning Components and Instruments (SCCI) team within our Aerospace Defense Customer Solutions (ADCS) organization.
XometryAccount Executive III, Aerospace and Defense XometryAccount Executive III, Aerospace and DefenseDenver, CO$70,000–$95,000 / yearXometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. The estimated base salary range for new hires into this role is $70,000-95,000 annually + commission depending on factors such as job-related skills, relevant experience, and location.
Actalent CareersNewTest Technician (Aerospace) Actalent CareersTest Technician (Aerospace)Littleton, CO$35–$42 / hourThe environment emphasizes precision, cleanliness, and adherence to documented procedures, with close collaboration among engineers and technicians who share a passion for space exploration and high-quality, reliable space systems. You will work on activities such as hardware assembly, soldering and PCB inspection, harness builds, component and assembly testing, and supporting environmental test campaigns for spacecraft.
Keysight Technologies, Inc.Account Manager - Aerospace and Defense Keysight Technologies, Inc.Account Manager - Aerospace and DefenseDenver, ColoradoOur ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization.
RCM Technologies, Inc. | Life Sciences / Data & SolutionsManager of Mechanical Engineering RCM Technologies, Inc. | Life Sciences / Data & SolutionsManager of Mechanical EngineeringDenver, COOperating at the intersection of resources, critical infrastructure, and modernization of industries, RCM is a provider of services in Life Sciences, Data & Solutions (IT), Healthcare, Engineering, Aerospace & Defense, and Process & Industrial. We are seeking a highly technical Mechanical Engineering leader to take full ownership of the cooling architecture, thermal strategy, and mechanical system integration across a portfolio of hyperscale HPC and AI data center projects.
University of ColoradoAssociate/Full Teaching Professor in Mechanical Engineering University of ColoradoAssociate/Full Teaching Professor in Mechanical EngineeringBoulder, CO$114,000–$125,000 / yearIn addition to a competitive salary, the University of Colorado Boulder offers gender-neutral paid parental leave (https://www.colorado.edu/policies/paid-parental-leave-policy) ; housing down-payment assistance programs (https://www.cu.edu/treasurer/housing-assistance-programs) ; a relocation and dual career assistance program (https://www.colorado.edu/engineering/careers/dual-career-relocation-assistance-program) ; and teaching (https://www.colorado.edu/center/teaching-learning/) and professional development (https://www.colorado.edu/facultydevelopmentandsupport/) . + A master's degree in mechanical engineering or a closely related field with either: (i) at least three years of experience working in a related industry and a minimum 6 years of teaching mechanical engineering or a closely related field at a higher education level, or (ii) a minimum 9 years of teaching mechanical engineering or a closely related field at a higher education level.
AURA NSF CentersMechanical Engineer III AURA NSF CentersMechanical Engineer IIIBoulder, CO$110,000–$130,000 / yearPart timeBy leading the design of key mechanical subsystems, this role ensures that telescope and instrumentation hardware meets demanding requirements for precision, stability, and long-term reliability. Independently solve moderately complex mechanical design problems for assigned subsystems, including selection of materials, fasteners, and fabrication methods suitable for precision observatory environments and remote sites.
Paragon Space Development CorporationStructural Analysis Engineer II Paragon Space Development CorporationStructural Analysis Engineer IIDenver, COParagon is developing exciting technologies, including spacesuits, lunar in-situ resource utilization (ISRU) systems, lunar dust mitigation, cryogenic fluid storage solutions, atmospheric revitalization for NASA's Lunar Gateway outpost, water recovery systems, and high-turndown morphing radiators. Proficient in structural analysis of aerospace system and components, including linear and nonlinear static analysis, stability analysis, Sine and random vibration analysis, shock and impact analysis.
Rocket Lab USAMission Operation Intern Fall 2026 Rocket Lab USAMission Operation Intern Fall 2026Littleton, COTemporaryMust be enrolled in a bachelor’s, master's or doctorate degree program in Aerospace Engineering, Aeronautical Engineering, Mechanical Engineering, or Software Engineering, or related field and have at least one semester of school remaining post internship GPA of 3.0 or above 3+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) Proficiency in Python, Linux, and Git THESE QUALIFICATIONS WOULD BE NICE TO HAVE GPA of 3.5 or above 6+ months of applied engineering experience (internship, laboratory, and personal/team project experience is applicable) General understanding of spacecraft systems, operations, or mission workflows Experience in AI/ML applications in software development or operations Familiarity with testing frameworks that integrate software and hardware systems ADDITIONAL REQUIREMENTS Able to work full-time, on-site for a minimum of 12 consecutive weeks beginning August or September 2026. WHAT YOU’LL GET TO DO As an intern, you will work closely with your mentor and other employees within the department to apply your knowledge and grow your skills both technically and professionally Work with a fast-paced group of professionals to apply engineering and industry concepts to solve real challenges Attend frequent 1:1’s with mentors and supervisors to facilitate success and learning while providing progress updates Enjoy tech talks and network with other interns and employees through social and professional events YOU’LL BRING THESE QUALIFICATIONS Ideal candidates will thrive in ambiguity and are excited to work in small, high-performing teams that are focused on continued learning and growth.
Redwire SpaceMechanical Engineer (will consider all Sr. levels), Redwire Space Redwire SpaceMechanical Engineer (will consider all Sr. levels), Redwire SpaceLittleton, Colorado$107,000–$190,000 / yearSome examples include but are not limited to spacecraft primary structure, lightweight and high‑stiffness assemblies, deployment and release mechanisms, avionics and payload mounting architectures, and tailored structural solutions enabling reliable mission performance from launch through end-of-life. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Lunar OutpostNewSenior Staff Systems Engineer - Mechanical Lunar OutpostSenior Staff Systems Engineer - MechanicalArvada, CO$155,000–$215,000 / yearPersonPreferred Qualifications:Masters Degree inrelevant disciplineProficiency in Bild, GrabCAD Workbench, Git, or similar CAD management softwareExperience inreliability assessmentsExperience in materials & processesPrior experience in aerospace startup environmentDemonstrated leadership in engineering environmentAny offer of employment for this position is conditional upon Lunar Outpost receiving theLTVS SubCLIN 1C Awardfrom NASA. Required Qualifications:Bachelor's Degree inMechanicalEngineering or related discipline10+Years of relevant experience(may be supplemented by applicable Masters degree)Demonstrated experience managing hardwarerequirements throughdevelopment and maturation for spaceflightDemonstrated experiencedriving V&V activitiesand test campaigns for flight hardwareProficiency inrequirementsmanagement tools such asJama, Doors, etc.
Alten Technology USANewMechanical Engineer II Alten Technology USAMechanical Engineer IILongmont, CO$100,000–$140,000 / yearJob Description Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.
Blue Origin Enterprises LPGuidance, Navigation & Control Engineer I - Early Career (2026 Starts) Blue Origin Enterprises LPGuidance, Navigation & Control Engineer I - Early Career (2026 Starts)Denver, CO$80,499–$112,697.55 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Throughout your three four-month rotations, you'll explore a variety of fields supporting our business units: New Shepard, New Glenn, Blue Engines, Lunar Permanence, In-Space Systems, Advanced Concepts and Enterprise Engineering, and Operations.
CesiumAstro IncPrincipal Spacecraft Systems Engineer II - Mission SEIT CesiumAstro IncPrincipal Spacecraft Systems Engineer II - Mission SEITWestminster, CO$193,000–$236,000 / yearThe Principal Systems Engineer II (Mission SEIT Lead) is the expert contributor to mission definition and verification, using best practices such as technical performance measures, decision analyses, system budgets, requirements elicitation and definition, verification and validation (V&V) planning, test practices, change management practices, risk management and mitigation, as well as your general technical knowledge and experience to provide guidance, plans, and expectations to the design teams who implement the requirements and CONOPS and deliver capability that is ready for assembly, integration, and test (AI&T) and ultimately launch and mission operations. In this position, you will be responsible for leading and mentoring a team of SE and test professionals, organized as a "SEIT" (Systems Engineering Integration and Test) group, in defining end-to-end mission capabilities, requirements, interfaces, and test campaigns for our satellite projects, including all relevant segments: space, ground, operations, and launch.
OpterusSenior Mechanical Engineer OpterusSenior Mechanical EngineerLoveland, CO$130,000–$165,000We combine cutting-edge composite materials, origami-inspired architectures, and elegant engineering to deliver lightweight, high-performance structural solutions for commercial, defense, and scientific missions. This role requires deep expertise in spaceflight hardware and a track record of leading complex programs from concept through flight qualification and production.
Urban SkyNewMechanical Engineer - Imaging Payloads Urban SkyMechanical Engineer - Imaging PayloadsDenver, CO$100,000–$140,000 / yearLead post-flight hardware teardowns and failure investigations to determine root cause and inform corrective actionsMaintain thorough engineering documentation including design/analysis rationale, trade studies, assembly procedures, test reports, and lessons learned to support knowledge retention and production readinessGenerate high-quality engineering drawings with appropriate use of GD&T when necessaryQualifications:Bachelor's degree in Mechanical Engineering or a closely related discipline; advanced degree is a plus but not required2-5 years of experience in mechanical design and integration of electromechanical systems operating in real-world environmentsProficiency in CAD software (e.g., OnShape, SolidWorks, or Fusion 360) for designing complex mechanical systemsStrong knowledge of materials and manufacturing processes, including CNC machining, sheet metal fabrication, 3D printing, and injection moldingIntuitive understanding of tolerance analysis, design for manufacturing (DFM), and design for assembly (DFA), with the ability to design parts and assemblies that are practical to build, inspect, and maintainStrong analytical and problem-solving skills, with experience using hand calculations and simulation tools to inform design decisions and the ability to systematically troubleshoot hardware issues when things don't go as plannedNice-to-Haves/Preferred Skills:Knowledge in optics, optomechanics, or imaging systemsExperience working in aerospace or satellite developmentExperience developing mechanisms, motion control applications, or gimbal systemsFamiliarity with integrating mechanical systems with electronics and sensorsKnowledge of stratospheric or high-altitude conditions and their impact on mechanical systemsExperience with cable and wire harness designFamiliarity with Linux or embedded systemsRequirements:Must be US Citizen or Permanent ResidentMust be located near Denver, COBenefits:Medical, Vision and DentalUnlimited Vacation DaysParental LeaveCell Phone Bill StipendStock OptionsUrban Sky is required to post this salary range per Colorado law. Develop and verify thermal models against test and flight data to build confidence in system performanceContribute to payload architecture decisions, including evaluating new sensor technologies, identifying candidate hardware for integration, and proposing new payload concepts or capability expansionsPlan and execute benchtop testing of subsystems and prototypes to validate functionality prior to flight testingConduct environmental testing including thermal cycling, vacuum exposure, and shock qualification.
DP ProfessionalsStructural Engineer II DP ProfessionalsStructural Engineer IIEnglewood, COEducation: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 2 or more years of relevant experience. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.) Rarely exposed to fumes or hazardous chemicals/materials.
DP ProfessionalsStructual Engineer III DP ProfessionalsStructual Engineer IIIEnglewood, COEducation: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.) Rarely exposed to fumes or hazardous chemicals/materials.
DP ProfessionalsStructural Engineer I DP ProfessionalsStructural Engineer IEnglewood, COEducation: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 0-2 or more years of relevant experience. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.) Rarely exposed to fumes or hazardous chemicals/materials.
Johnson Service GroupStructural Engineer I Johnson Service GroupStructural Engineer IEnglewood, CO$48–$57 / hourSkills: Must-haves: Understanding of engineering principles and practices, Basic knowledge of Computer Aided Engineering tools, Experience working in multi-disciplinary design and development teams, Exposure to Static and/or Dynamic Analyses. Education: Must-haves: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 2 or more years of relevant experience.
Johnson Service GroupStructural Engineer ( Stress) III Johnson Service GroupStructural Engineer ( Stress) IIIEnglewood, CO$65–$75 / hourKeywords: Education: Must-haves: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience, Understanding of engineering principles and practices. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.)Rarely exposed to fumes or hazardous chemicals/materials.
True Anomaly IncTest Engineer I or II True Anomaly IncTest Engineer I or IIDenver, CO$65,000–$90,000 / yearTest Engineer II: • Bachelor's degree with 2-4+ years of hands-on test engineering experience within the aerospace or defense industry, or a Master's degree with relevant experience • Demonstrated proficiency in, or strong interest in developing expertise across, test planning, execution, and post-test analysis using modern tools and methods • Working knowledge of test equipment, instrumentation, data acquisition systems, and test scripting or automation • Strong attention to detail and ability to follow defined processes and safety protocols • Proficiency with Microsoft Office; ability to learn test management and data analysis tools • Strong documentation and communication skills • U.S. Citizenship required due to government contracts. Test Engineer I: • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field • 0-1 years of academic or industry experience in a test, validation, or lab environment.
Precision Resources Company IncStructural Engineer I Precision Resources Company IncStructural Engineer IEnglewood, COSkills: Must-haves: Conceptual knowledge of engineering principles and practices, Basic knowledge of Computer Aided Engineering tools, Familiarity working in multi-disciplinary design and development teams, Understanding of Static and/or Dynamic Analyses. Keywords: Education: Must-haves: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 0-2 or more years of relevant experience
Precision Resources Company IncStructural Engineer II Precision Resources Company IncStructural Engineer IIEnglewood, COSkills: Must-haves: Understanding of engineering principles and practices, Basic knowledge of Computer Aided Engineering tools, Experience working in multi-disciplinary design and development teams, Exposure to Static and/or Dynamic Analyses. Keywords: Education: Must-haves: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 2 or more years of relevant experience
Precision Resources Company IncStructural Engineer III Precision Resources Company IncStructural Engineer IIIEnglewood, COKeywords: Education: Must-haves: Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience, Understanding of engineering principles and practices Skills and Experience: Required Skills: COMPUTER AIDED ENGINEERING TOOLS. Working Conditions: Rarely exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.)Rarely exposed to fumes or hazardous chemicals/materials.
Air MethodsSystems Engineer Air MethodsSystems EngineerEnglewood, ColoradoDuring the NPI Propose Phase: Collaborate with Sales and Business Development Team to define, manage, and provide technical leadership to commercial or military projects within the Engineering Department to assure technical project compliance with budget, schedule and performance by leading airframe, subsystem, and component level requirement capture, memorialization, and management processes and tools across mechanical and electrical engineering teams, utilizing a “right-size” approach to ensure efficiency across a wide range of project / program complexity and applications. During the NPI Plan Phase: Lead requirement decomposition, including all aspects of 14 CFR and external customer requirements and facilitate decomposition to component and functional levels for both electrical and mechanical subsystems with subsystem Project Engineers, Electrical Engineering, Mechanical Engineering, and Certification Engineering teams.
ALTEN Technology USAMechanical Engineer (NPI/NTI) ALTEN Technology USAMechanical Engineer (NPI/NTI)Boulder, CO$120,000–$150,000 / yearAs a Mechanical Engineer you will be responsible for; Work with cross functional teams to research novel technologies and design new instrumentation to demonstrate project feasibility and meet defined specifications. Ability to read, interpret, and create mechanical drawings; especially sheet metal, plastic injection-molded and machined part drawings utilizing geometric dimensioning and tolerancing (GD&T) per ASME/ANSI Y14.5M.
ALTEN Technology USAMechanical Engineer II ALTEN Technology USAMechanical Engineer IIDenver, CO$85,000–$90,000 / yearWe're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments.
Redwire SpacePropulsion Engineer (will consider all Sr. levels) (Mechanical Engineer) Redwire SpacePropulsion Engineer (will consider all Sr. levels) (Mechanical Engineer)Littleton, Colorado$140,000–$205,000 / yearSummaryRedwire Space Missions LLC, has an exciting opportunity for a Propulsion Engineer (will consider all senior levels), responsible for the definition, integration, and technical oversight of spacecraft propulsion subsystems supporting maneuvering, station-keeping, and end-of-life disposal across Space Missions programs. Experience with performance modeling (CEA-equilibrium for chemical, EP thruster curve fits), duty cycles, life models, thermal/structural margins, and fault detection, isolation, and recovery (FDIR) strategies for autonomous operations.
LightshipNewSenior Mechanical Engineer - Exteriors & Closures LightshipSenior Mechanical Engineer - Exteriors & ClosuresBroomfield, COMinimum Qualifications BS mechanical/aerospace engineering or similar (MS preferred)5+ years of relevant experienceExperience designing and engineering similar products, taking them from concept to production manufacturing, ideally in a lower volume environmentRelevant prior experience in RV, automotive or aerospace design/engineering, including bonded and opening windows, exterior doors and mechanisms, or linear actuation. - 8 Company Holidays + the company observes a period of scheduled downtime during the end of the year for a week, allowing all employees to enjoy a break - 12 weeks paid parental leave - $2,000 per year towards an RV trip of your own &/or professional development opportunities - we call this a LightTripLightship offers all of its full time employees and their dependents full benefits including health, dental and vision insurance and covers 100% of the insurance premium.
Synopsys IncApplications Engineering, Staff Engineer Synopsys IncApplications Engineering, Staff EngineerBoulder, COThe team thrives on collaboration, knowledge sharing, and technical excellence, working closely with sales, product development, marketing, and customers to drive continuous improvement and expand Synopsys impact in engineering simulation. Guiding project teams to develop differentiated simulation solutions using Ansys platforms and products, integrating these solutions into customers engineering workflows.
Redwire SpaceChief Engineer, Space Missions Redwire SpaceChief Engineer, Space MissionsLittleton, Colorado$222,000–$280,000 / yearYou'll operate across multiple programs, allocating time to the highest-risk and most technically complex challenges, providing deep technical leadership, and serving as a unifying technical fabric across the Space Missions Engineering organization. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Capella Space CorpNewStaff Quality Engineer, Hardware Capella Space CorpStaff Quality Engineer, HardwareLouisville, CO$145,920–$192,000 / yearTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Capella Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Provide real-time quality support on the manufacturing floor, including developing inspection test procedures, acceptance test procedures (ATP) and overseeing environmental testing quality compliance (vibration, thermal vacuum, EMI/EMC).
True Anomaly IncPrincipal Spacecraft Simulation Software Engineer True Anomaly IncPrincipal Spacecraft Simulation Software EngineerDenver, CO$180,000–$295,000 / yearLead the design and implementation of production-quality multi-physics simulation software spanning spacecraft subsystems: 6DOF rigid body dynamics (gravity gradient, solar radiation pressure, atmospheric drag, magnetic torques, third-body effects), thermal modeling, attitude dynamics and control, propulsion (chemical/electric), power generation and storage, and high-fidelity sensor/actuator models (reaction wheels, CMGs, star trackers, gyros, magnetometers). True Anomaly is seeking a Principal Spacecraft Simulation Software Engineer to define the long-term technical vision and architecture for a simulation platform that spans some of the hardest problems in modern aerospace-from high-fidelity multi-physics modeling of spacecraft and constellations to simulation of complex, dynamic environments that dont yet have established playbooks.
Lux AeternaSenior Mechanisms Engineer Lux AeternaSenior Mechanisms EngineerDenver, COFull timeAt Lux Aeterna, we’re building that future by developing the first fully reusable satellite platform built for reliable reentry, recovery, and rapid redeployment, transforming space from a one-way street into a two-way highway for innovation and commerce. This role exists to produce real flight hardware that deploys, actuates, seals, separates, latches, releases, survives, and operates repeatedly in the harsh realities of spaceflight.
Odyssey Information ServicesSupplier Quality Engineer Odyssey Information ServicesSupplier Quality EngineerBroomfield, COThe ideal candidate will have experience managing supplier quality initiatives, conducting audits, driving corrective actions, and partnering cross-functionally with engineering, operations, and supply chain teams. This position will support supplier performance throughout the full product lifecycle, from qualification and production readiness through continuous improvement efforts.
Impulse Space Propulsion Inc.Simulation Engineer Impulse Space Propulsion Inc.Simulation EngineerBoulder, COSimulation EngineerDepartment Autonomous SystemsEmployment Type Full TimeLocation Boulder CountyCompensation 125000 - 175000 yearDescriptionAs a Simulation Engineer you will be responsible for developing and maintaining high-fidelity simulations of space vehicle dynamics sensors actuators and propulsion systems with the potential to expand into other subsystems. This position requires applicants to be either U.S. Persons i.e. U.S. citizen U.S. national lawful permanent U.S. resident green card holder an individual granted asylum in the U.S. or an individual admitted in U.S. refugee status or persons eligible to obtain an export license from the U.S. Departments of State Commerce or other applicable U.S. government agencies.
InfleqtionPrincipal Thermal Engineer - Space Payload Design, Analysis and Modeling InfleqtionPrincipal Thermal Engineer - Space Payload Design, Analysis and ModelingLouisville, COInfleqtion is seeking a highly experienced thermal analyst; this role is responsible for keeping our sensor head and electronics temperature limits in check when performing physics sequences enabling quantum sensing operations in space. The role requires close collaboration with our prime customer(s), internal management, researchers, systems engineers, aerospace experts, manufacturing partners, suppliers, and external subcontractors.
InfleqtionNewSenior Productization Engineer InfleqtionSenior Productization EngineerLouisville, COThe Senior Productization Engineer owns the technical implementation path for turning architected product intent, custom development opportunities, prototypes, and improvement campaigns into buildable, testable, manufacturable, and supportable offerings within the vacuum cell technologies (VCT) portfolio. The Senior Productization Engineer translates product concepts and requirements into executable technical work packages, integration and verification plans, technical risk retirement plans, and production-readiness deliverables.
Impulse SpaceSenior Simulation Engineer Impulse SpaceSenior Simulation EngineerLouisville, CO$150,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. As a Simulation Engineer, you will be responsible for developing and maintaining high-fidelity simulations of space vehicle dynamics, sensors, actuators, and propulsion systems, with the potential to expand into other subsystems.
Albedo Space Corp.Senior GNC Engineer Albedo Space Corp.Senior GNC EngineerBroomfield, CO$130,000–$155,000 / yearExperience with spacecraft GNC sensors (star trackers, IMUs, sun sensors, GNSS) and attitude actuators (reaction wheels, torque rods, CMGs). B.S. or M.S. in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Physics, or related field - or equivalent depth from a Ph.
Sargent & LundyLead Piping Stress Engineer 1 - Nuclear Sargent & LundyLead Piping Stress Engineer 1 - NuclearEnglewood, CO$116,620–$179,890 / yearSince 1954, we’ve been a trusted leader in nuclear engineering, design, and licensing, with expertise spanning small modular reactors (SMRs), advanced reactor technology (ART), and first-of-a-kind commercial reactor restart projects. BS or MS in Mechanical Engineering, Engineering Mechanics, Aerospace, or Structural/Civil Engineering, from an ABET Engineering Accreditation Commission-approved program, with an emphasis in solid mechanics, structural analysis, theory of elasticity, metallurgy, and finite element analysis.