Aircraft Technician (Unlicensed) - INCREASED PAY! HQ Aero ManagementAircraft Technician (Unlicensed) - INCREASED PAY!Bridgeport, WVThe job duties consist of using hand tools to remove screws on access panels of the aircraft, performing limited aircraft maintenance, cleaning grease grime in wheel wells and aircraft underbelly, removing corrosion protection, and working with different chemicals. Shift Work: Front Half Days - Sun, Mon, Tues and every other Wed 6:00 AM to 6:30 PM | Back Half Days - Thu, Fri, Sat and every other Wed 6:00 AM to 6:30 PM | Front Half Nights - Sun, Mon, Tues and every other Wed 6:00 PM to 6:30 AM | Back Half Nights - 6:00 PM to 6:30 AM (must be willing to work either shift).
Army C-12 / King Air Transport Aircraft Mechanic (FAA A&P) -Williamstown, WV. Amentum Services IncArmy C-12 / King Air Transport Aircraft Mechanic (FAA A&P) -Williamstown, WV.Williamstown, WVUnion CBA Site offers 3 levels of A&P mechanic employment, based on the number of specific years of A&P experience on the MDS Army C-12/King Air B200/350/1900, PT6 aircraft assigned. Reads and interprets manufacturers' maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
TITLE 32 AIRCRAFT WORKER WG-8852-08 United States ArmyTITLE 32 AIRCRAFT WORKER WG-8852-08Wheeling, WV$28.60–$33.30 / hourRepair work includes removing, cleaning, reinstalling or replacing defective parts, accessories and components such as worn gaskets, couplings, fittings, bad actuators, accumulators, and gauges, sections of corroded fuel and oil lines, worn cable pulleys, frayed sparkplug cables, and burned-out landing lights. Experience in following detailed instructions in making routine, reoccurring repairs and modifications to aircraft parts, subassemblies, and components, e.g., such as jacking and leveling aircraft, installing, and adjusting engines, landing gear assemblies, instrument panels, and flight control systems.
AIRCRAFT CLEANER HQ Aero ManagementAIRCRAFT CLEANERBridgeport, WVYou will complete duties such as preparing cleaning products, discharging waste and performing cleaning by hand or tools. Potential for advancement in the aircraft industry exists, as this job will provide an entry level introduction to what aircraft maintenance is all about.
TITLE 32 AIRCRAFT LOADMASTER (INSTRUCTOR) GS-2185-10 United States Air ForceTITLE 32 AIRCRAFT LOADMASTER (INSTRUCTOR) GS-2185-10Martinsburg, WV$77,771–$101,097 / yearFunctionally checks all aircraft systems, flight instruments, and onboard computers e.g., Communications Navigation Identification Unit, Heads Down Display (HDD), the Self Contained Navigation System (SCNS), Inertial Navigation System (INS), Traffic Alert and Collision Avoiding System (TCAS), Ground Collision Avoidance System (GCAS) and Multi-functional Control Display. Typical missions assigned the unit include the airlift of equipment and personnel, combat airdrop, medical evacuation, polar operations, search and rescue, fire fighting, special operations, combat aircrew training, formal school, and counter drug intelligence and reconnaissance.
Diesel Technician Apprentice (Military Veterans) Isuzu Veterans Apprenticeship Program (IVAP)Diesel Technician Apprentice (Military Veterans)Mineral Wells, WV$45,000–$65,000This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Matheny Isuzu Trucks of Mineral Wells, West Virginia is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician.
Skillbridge Fellowship - Industrial Maintenance Technician Tyson Foods IncSkillbridge Fellowship - Industrial Maintenance TechnicianWVRelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). Tyson Foods proudly supports the Department of Defense SkillBridge program and invites transitioning service members to join our team as an Equipment Maintenance Fellow.
Maintenance Supervisor - Veteran Pathway Tyson Foods IncMaintenance Supervisor - Veteran PathwayCharleston, WV$78,500–$113,600 / yearTyson will develop an offer based on a candidate's or team member's relevant skills and capabilities, the market data for the role described in this requisition, internal equity, and other information relevant to the candidate and role. Relevant backgrounds may include (not required): • Army: 91B (Wheeled Vehicle Mechanic), 91X / 91Z (Maintenance Leadership), 12R (Interior Electrician), 11Z (Senior Enlisted Leadership).
Central Maintenance Manager Constellium SECentral Maintenance ManagerWVThese include parks, lakes, forests, Civil War trails, golf courses, historical landmarks (covered bridges, a heritage house, a castle), museums and galleries, conference centers, the Clay Center for the Arts and Sciences, the Charleston Light Opera Guild, and much more. Our advanced aluminum products manufactured in the US, France and Switzerland can be found in platforms manufactured by Airbus, Applied Materials, Blue Origin, Boeing, Bombardier, Dassault, Embraer, General Dynamics, LAM, Lockheed Martin, SpaceX and others.
A&P TECHNICIAN HQ Aero ManagementA&P TECHNICIANBridgeport, WVShift Schedule: 12-hour shifts |3 days on / 4 days off | 4 days on / 3 days off. Physical Demands: The employee must occasionally lift and/or move up to 50 pounds, Position requires frequent walking, standing and/or climbing.
A&P MECHANIC - MRT HQ Aero ManagementA&P MECHANIC - MRTBridgeport, WVRecruiting a specialized Aircraft Maintenance Technician (AMT) or A&P mechanic who travels to the location of an aircraft to perform repairs, inspections, and maintenance, often in urgent Aircraft On Ground (AOG) situations. Experience: 3+ years of experience in aircraft maintenance, often with specific experience on corporate, regional, or specific manufacturer jet models (e.g., Dassault, Bombardier, Pratt & Whitney).
NewA&P Mechanic GAL AeroStaffA&P MechanicBridgeport, WVPRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): Perform system and/or function checkouts of components (static checks, hydraulic function checks, flight control rigging, fuel system checks and oxygen, ect.) per appropriate approved maintenance procedures or FAA requirements. Complete assigned work, including troubleshooting and repairs of malfunctioning systems in a safe manner in accordance with OSHA and company safety procedures within established schedule.
Structures Technician CR&O Johnson Service GroupStructures Technician CR&OBridgeport, WVStay current on industry trends, technological advancements, and regulatory changes related to aviation structural maintenance. Utilize precision measuring tools and equipment to ensure accurate repairs and compliance with aviation regulations.
Structures Technician Mitsubishi Heavy Industries LtdStructures TechnicianBridgeport, WVPurpose of the role: MHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The Structures Technician performs thorough inspections of aircraft structures, identifying and documenting any signs of damage or wear while complying with environmental health, safety policies, and procedures. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
CR&O Structures Technician Mitsubishi Heavy Industries LtdCR&O Structures TechnicianBridgeport, WVPurpose of the role: MHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The CR&O Structures Technician performs thorough inspections of aircraft structures, identifying and documenting any signs of damage or wear while complying with environmental health, safety policies, and procedures. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
Refrigeration Technician - Veteran Pathway Tyson Foods IncRefrigeration Technician - Veteran PathwayWVRelevant Backgrounds May Include (Not Required): Army: 91B (Wheeled Vehicle Mechanic), 91D (Power Generation Equipment Repairer), 91E (Allied Trades Specialist), 91C (Utilities Equipment Repairer), 15T (UH-60 Helicopter Repairer). If you've troubleshot mechanical, electrical, Refrigeration or HVAC systems, performed preventive maintenance, followed safety procedures, or ensured equipment reliability, your experience can translate directly into this role.
STRUCTURES TECHNICIAN HQ Aero ManagementSTRUCTURES TECHNICIANBridgeport, WVQualifications, Experience & Requirements: Minimum of 3 years of structural sheet metal repair and modification experience or substantiated similar experience. Assist in conducting hidden damage inspection of aircraft structures and aircraft component repair.
AVIONICS TECHNICIAN HQ Aero ManagementAVIONICS TECHNICIANBridgeport, WVQualifications, Experience & Requirements: Minimum of 4 year avionics work experience or substantiated equivalent experience; corporate jet aircraft / commercial aircraft experience is preferred. Shift Schedule: 12-hour shifts |3 days on / 4 days off | 4 days on / 3 days off.
CR&O STRUCTURES TECHNICIAN HQ Aero ManagementCR&O STRUCTURES TECHNICIANBridgeport, WVQualifications, Experience & Requirements: Minimum of 2 years of structural sheet metal repair / modification experience or substantiated similar experience. Physical Demands: The employee must occasionally lift and/or move up to 50 pounds, Position requires frequent walking, standing and/or climbing.
Manufacturing Structures Technician Mitsubishi Heavy Industries LtdManufacturing Structures TechnicianBridgeport, WVMHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The Manufacturing Structures Technician will fabricate and/or modify structural aircraft parts. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
QUALITY INSPECTORS - CONTRACT TO HIRE HQ Aero ManagementQUALITY INSPECTORS - CONTRACT TO HIREBridgeport, WVEnsure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customers (RED, RFE, & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc.) are complete and required approvals have been obtained. Qualifications, Experience & Requirements: Minimum of 2 years' experience performing aircraft inspections under Far 145, 121, 135 or Military experience on commercial / military aircraft.
Diesel Technician (Military Veterans) Isuzu Veterans Apprenticeship Program (IVAP)Diesel Technician (Military Veterans)Cross Lanes, WV$45,000–$65,000World-Wide Equipment Isuzu Trucks of Cross Lanes, West Virginia is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry.
Test Mechanic (B Shift)(Onsite) RTXTest Mechanic (B Shift)(Onsite)Bridgeport, West VirginiaKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. Check dimensions for backlash, endplay, fits, clearances, and other specified requirements with precision measuring instruments such as micrometers, dial indicators and a variety of fixed gauges working to close tolerances.
Test Mechanic (D Shift)(Onsite) RTXTest Mechanic (D Shift)(Onsite)Bridgeport, West VirginiaKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. Check dimensions for backlash, endplay, fits, clearances, and other specified requirements with precision measuring instruments such as micrometers, dial indicators and a variety of fixed gauges working to close tolerances.
Aviation Technician (A&P Certified) (1986) VSE CorpAviation Technician (A&P Certified) (1986)Bridgeport, WVStrong knowledge of electric fuel pumps, engine driven fuel pumps, fuel controls, fuel heaters, oil coolers, fuel actuators, fuel valves, fuel pressure switches, MEC's HMU's, FMU's, and fuel accessories. SUMMARY: The Aviation Technician I must demonstrate high mechanical aptitude and will inspect, service, maintain, troubleshoot, repair, and overhaul aircraft components while maintaining a safe work environment and following all company and federal rules/ regulations.
Aviation Technician (A&P Certified) (1985) VSE CorpAviation Technician (A&P Certified) (1985)Bridgeport, WVStrong knowledge of electric fuel pumps, engine driven fuel pumps, fuel controls, fuel heaters, oil coolers, fuel actuators, fuel valves, fuel pressure switches, MEC's HMU's, FMU's, and fuel accessories. SUMMARY: The Aviation Technician I must demonstrate high mechanical aptitude and will inspect, service, maintain, troubleshoot, repair, and overhaul aircraft components while maintaining a safe work environment and following all company and federal rules/ regulations.
Diesel Technician (Military Veterans) IVAPDiesel Technician (Military Veterans)Cross Lanes, West VirginiaWorld-Wide Equipment Isuzu Trucks of Cross Lanes, West Virginia is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry.
Diesel Technician Apprentice (Military Veterans) IVAPDiesel Technician Apprentice (Military Veterans)Mineral Wells, West VirginiaThis opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Matheny Isuzu Trucks of Mineral Wells, West Virginia is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician.
Test Mechanic (B Shift)(Onsite) RTX CorpTest Mechanic (B Shift)(Onsite)Bridgeport, WVKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. Check dimensions for backlash, endplay, fits, clearances, and other specified requirements with precision measuring instruments such as micrometers, dial indicators and a variety of fixed gauges working to close tolerances.
Test Mechanic (D Shift)(Onsite) RTX CorpTest Mechanic (D Shift)(Onsite)Bridgeport, WVKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. Check dimensions for backlash, endplay, fits, clearances, and other specified requirements with precision measuring instruments such as micrometers, dial indicators and a variety of fixed gauges working to close tolerances.
Interior Technician Mitsubishi Heavy Industries LtdInterior TechnicianBridgeport, WVPurpose of the role: MHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The Interiors Technician will install / refurbish / modify / aircraft interior equipment and furnishings. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
Production Controller Mitsubishi Heavy Industries LtdProduction ControllerBridgeport, WVMHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The Production Controller is responsible for coordinating and expediting the flow of work and associated material for assigned aircraft. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
TITLE 32 SUPERVISORY QUALITY ASSURANCE SPECIALIST GS-1910-12 United States Air ForceTITLE 32 SUPERVISORY QUALITY ASSURANCE SPECIALIST GS-1910-12Martinsburg, WV$102,415–$133,142 / yearPlans, directs, organizes, and exercises control over Quality Assurance Specialists (non-supervisory employees) assigned utilizing a comprehensive knowledge of aircraft to include electronic equipment and systems, manual and automatic flight controls, airframe, landing gear, pneudraulics, and jet engine propulsion, armament, munitions, and associated systems. The purpose of this position is to supervise, establish and direct a planned, systematic approach of a quality assurance program designed to provide the maintenance managers confidence that aircraft, aircraft systems, products or supporting processes conform to technical, safety, work load and customer requirements.
PW800 Assembly Technician (5th Shift)(Onsite) RTX CorpPW800 Assembly Technician (5th Shift)(Onsite)Bridgeport, WVKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
PW800 Assembly Technician (5th Shift)(Onsite) RTXPW800 Assembly Technician (5th Shift)(Onsite)Bridgeport, West VirginiaKnowledge of aircraft engine assembly procedures including fits and tolerances, use of precision measuring instruments and gauges, hand tools, special assembly equipment and the ability to work from complicated drawings and specifications. Not Required At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems.
MRT Technical Coordinator (Onsite) RTX CorpMRT Technical Coordinator (Onsite)Bridgeport, WVFor a given work scope, identify technician with proper capabilities, establish parts listing and tooling required, including airframe interfaces, ship parts and tooling as required to meet the RTS strategy. Additional Information and FAA Requirements: FAA Anti-Drug and Alcohol Misuse Prevention Program - This position is covered under the PWES FAA Anti-Drug and Alcohol Misuse Prevention Program.
MRT Technical Coordinator (Onsite) RTXMRT Technical Coordinator (Onsite)Bridgeport, West VirginiaFor a given work scope, identify technician with proper capabilities, establish parts listing and tooling required, including airframe interfaces, ship parts and tooling as required to meet the RTS strategy. Additional Information and FAA Requirements: FAA Anti-Drug and Alcohol Misuse Prevention Program – This position is covered under the PWES FAA Anti-Drug and Alcohol Misuse Prevention Program.
Pilot (First Officer) - Midwest Region NetJets Inc.Pilot (First Officer) - Midwest RegionHuntington, WV$86,015–$117,706 / yearGreets Owners/passengers pre-flight, makes introductions and briefs them on the specific flight/trip and verifies itinerary/provides passengers with weather updates and safety briefings and explains any changes to itinerary. Acts as a liaison for Owners/ passengers and NetJets from the time the Owners/passengers arrive at the FBO until they have safely landed at their final destination and have departed the final FBO.
Engine MRO Specialist (Onsite) RTX CorpEngine MRO Specialist (Onsite)Bridgeport, WVYou will also work closely with customer managers and operations cost managers to optimize the fleet lifecycle cost for their customer's fleets, investigate and report on hardware cost trends, review cost estimates, and influence engine costs during shop visit. You will collect data and examples related to trends of hardware condition and work with your network to improve work scopes, extend inspection limits, develop repairs, and optimize decisions that will result in improvements to profitability for our maintenance contracts.
Mechanic - Field Service Technician Crown Equipment CorporationMechanic - Field Service TechnicianParkersburg, WVOur global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Company Description: Crown Equipment Corporation, one of the worlds largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries.
Diesel Mechanic Republic ServicesDiesel MechanicFairmont, West VirginiaPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. Republic has partnered with renewable gas developers to construct Renewable Natural Gas (RNG) plants at our landfills, expanding beyond the 77 projects we currently have to make progress towards our goal to beneficially reuse 50% more biogas by 2030 (2017 baseline year).
Airport Ramp Agent PT - CRW Unifi Aviation, LLCAirport Ramp Agent PT - CRWCharleston, WVPart timeJob Title Airport Ramp Agent PT - CRW Date Wednesday, June 24, 2026 Entity Unifi Aviation, LLC State West Virginia City Charleston Base Pay Rate: $ 13.50 Seasonal Pay Rate: $ 1.5 Full/Part Time Part Time Total Pay: $ 15 Exempt or Non-Exempt Position Non-Exempt Shift A.M. Physical requirements: Must be able to frequently lift, greater than 70lbs and constantly lift up to 70 lbs; Constantly push, pull up to 70 lbs; and constantly walk, stand, reach above shoulder, climb, crawl, stoop, squat, kneel, & bend.
Quality Inspector Mitsubishi Heavy Industries LtdQuality InspectorBridgeport, WVPurpose of the role: MHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The Quality Inspector performs inspections of aircraft, engines, parts, and components using precision tools, equipment, and other materials in accordance with applicable regulatory requirements and is responsible for ensuring all airworthiness quality requirements are performed and documented in accordance with all applicable regulations regarding maintenance, preventative maintenance, repair and alteration of aircraft, engine, and aircraft components/parts for which the Repair Station is rated. • Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc.) is complete and required approvals have been obtained.
NewCR&O Quality Inspector Mitsubishi Heavy Industries LtdCR&O Quality InspectorBridgeport, WVPurpose of the role: MHIRJ's network of service centers, support offices and parts depots are positioned in important aviation hubs in the U.S. The CR&O Quality Inspector performs inspections of aircraft, engines, parts, and components using precision tools, equipment, and other materials in accordance with applicable regulatory requirements and is responsible for ensuring all airworthiness quality requirements are performed and documented in accordance with all applicable regulations regarding maintenance, preventative maintenance, repair and alteration of aircraft, engine, and aircraft components/parts for which the Repair Station is rated. Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA) and regulatory paperwork (FAA, FAR/CAA, etc.) is complete and required approvals have been obtained.
Product Review Engineer (Mid or Lead) The Boeing CoProduct Review Engineer (Mid or Lead)Shepherd Field Air National Guard Base, WV$103,700–$150,650 / yearBoeing Global Services (BGS) is currently hiring for a broad range of experience levels including a Mid or Lead Level Product Review Engineer to join the C-17 Field Engineering and Technical Support (FETS) team at Ramstein Air Force Base in Ramstein, Germany. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Cross-Utilized Airport Agent - Mid-Ohio Valley Regional Airport (PT) Corporate Flight Management IncCross-Utilized Airport Agent - Mid-Ohio Valley Regional Airport (PT)WVBoard and deplane flights, escort passengers to and from aircraft as needed, including assisting unaccompanied minors, pushing wheelchairs, and providing support to passengers with special needs. Handle customer baggage and Company materials with care; responsibilities include frequent lifting, loading/unloading, sorting, and transferring baggage and cargo.
CMM Operator (2nd Shift)(Onsite) RTX CorpCMM Operator (2nd Shift)(Onsite)Bridgeport, WVQualifications You Must Have: High School Diploma or GED equivalent and a minimum of 1 year of experience operating Coordinate Measuring Machines (CMM), CNC machines, manual lathes, or similar inspection equipment. Must be able to provide component dimensions, visual and dimensional inspection of a variety of engine components to determine serviceability, and conformance to overhaul / repair manual specifications.
UAS Integration Engineer ParsonsUAS Integration EngineerUs, West VirginiaYou will serve as a Remote Pilot in Command, technical subject matter expert, integrator, and test engineer responsible for building, modifying, evaluating, and operating UAS platforms, payloads, command-and-control systems, and supporting technologies in laboratory, field, and operational environments. Bachelor's Degree in Engineering, Aviation, Unmanned Systems, Robotics, Electronics, Computer Science, or a related technical field and 5+ years of relevant experience, or at least 9+ years of related work experience in lieu of degree.
Continuous Improvement Manager (Onsite) RTX CorpContinuous Improvement Manager (Onsite)Bridgeport, WVPartner with business unit and value stream owners to implement best practices and industry-leading process improvement tools, such as SIPOC, Impact/Maturity analysis, MFA, QCPC, 3P, VSM, and RCA. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
CMM Operator (2nd Shift)(Onsite) RTXCMM Operator (2nd Shift)(Onsite)Bridgeport, West VirginiaHigh School Diploma or GED equivalent and a minimum of 1 year of experience operating Coordinate Measuring Machines (CMM), CNC machines, manual lathes, or similar inspection equipment. Must be able to provide component dimensions, visual and dimensional inspection of a variety of engine components to determine serviceability, and conformance to overhaul / repair manual specifications.