CBA Aircraft Mechanic III - (H60) Maintenance Controller - NTWP Naval Test V2X IncCBA Aircraft Mechanic III - (H60) Maintenance Controller - NTWP Naval TestCAThe Maintenance Control Representatives shall have an in-depth working knowledge of the CNAFINST 4790.2 (series) and all applicable T/M/S technical publications, which apply to their applicable T/M/S specific aircraft as well, have a working knowledge of the Special Projects / Flight Clearances / Interim Flight Clearances, which are applicable to their assigned T/M/S aircraft. The Maintenance Control Aircraft Mechanic III directs, coordinates, and monitors all maintenance/material actions necessary to retain or restore aircraft, material, equipment, or components to a serviceable condition with a minimum expenditure of resources in the most efficient manner.
CBA Aircraft Mechanic III - (F-18) Maintenance Controller - NTWP Naval Test V2X IncCBA Aircraft Mechanic III - (F-18) Maintenance Controller - NTWP Naval TestCAThe Maintenance Control Representatives shall have an in-depth working knowledge of the CNAFINST 4790.2 Series and all applicable T/M/S technical publications which apply to their applicable Type/Model/Series (T/M/S) specific aircraft as well have a working knowledge of the Special Projects/Flight Clearances/Interim Flight Clearances which are applicable to their assigned T/M/S aircraft. Knowledgeable of technical directives and CNAFINST 4790.2 Series; be knowledgeable of and understand basic supply procedures; possess a working knowledge of applicable aircraft and shall have worked a minimum of one year in a maintenance/production control position.
CBA Aircraft Mechanic II - Airframes (F-18) V2X IncCBA Aircraft Mechanic II - Airframes (F-18)CAThe Aircraft Mechanic II maintains/repairs aircraft engine systems, structures and structural components of moderate difficulty, maintains and repairs aircraft components flight controls, power plants and related systems, hydraulics, pneumatics, fuel systems, mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Perform scheduled/unscheduled O-Level maintenance on specific applicable squadron T/M/S aircraft airframe, ordnance, power plants, corrosion control and painting, and related systems hired to maintain.
CBA Aircraft Mechanic I - Airframes (F-18) V2X IncCBA Aircraft Mechanic I - Airframes (F-18)CAMaintains, repairs and modifies aircraft structures, aircraft ordnance systems, egress systems, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, aviation ordnance systems, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe, ordnance and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Aircraft Mechanic I performs scheduled/unscheduled maintenance on specific applicable T/M/S aircraft airframe, ordnance, egress/life support system, power plants, corrosion control and painting, and related systems hired to maintain.
CBA Aircraft Mechanic II - Power Plants (F-18) V2X IncCBA Aircraft Mechanic II - Power Plants (F-18)CAThe Aircraft Mechanic II maintains/repairs aircraft engine systems, structures and structural components of moderate difficulty, maintains and repairs aircraft components flight controls, power plants and related systems, hydraulics, pneumatics, fuel systems, mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Aircraft Mechanic II - Power Plants (F-18) NTWP China Lake, CA V2X IncCBA Aircraft Mechanic II - Power Plants (F-18) NTWP China Lake, CACAThe Aircraft Mechanic II maintains/repairs aircraft engine systems, structures and structural components of moderate difficulty, maintains and repairs aircraft components flight controls, power plants and related systems, hydraulics, pneumatics, fuel systems, mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Quality Assurance Representative - Aircraft Mechanic III (P-8) - NTWP - V2X IncCBA Quality Assurance Representative - Aircraft Mechanic III (P-8) - NTWP -CAMinimum of three years of aircraft maintenance experience as an aircraft quality assurance representative/specialist in naval aviation (E-6), or civil service (WG-10), or Government aviation maintenance Contractor inspector. Comply with all current sections of NAVAIRINST 3710.1 (series) and CNAFINST 4790.2 (series) as applicable to Aircraft Maintenance, and a thorough knowledge of flight line operations.
CBA Aircraft Mechanic II (F18 Airframes) - NTWP - China Lake, CA V2X IncCBA Aircraft Mechanic II (F18 Airframes) - NTWP - China Lake, CACARepairs replace and rebuild aircraft structures of moderate difficulties, such as wings, fuselage, surface controls, and functional components including rigging, plumbing, and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns, and drills. The candidate must have completed the Navy Class "C" school in airframe and hydraulic repair for the position-specific T/M/S aircraft billet, or USMC/USCG (Five years organizational level experience on the applicable position-specific T/M/S aircraft may be substituted for the Class "C" school.).
NewCBA Aircraft Mechanic II Ordnance QASO (F-18) V2X IncCBA Aircraft Mechanic II Ordnance QASO (F-18)CAShall have ten (10) years of experience supervising the loading and arming of all types of conventional ordnance on aircraft, three (3) of which must have been within the last 10 years on similar type aircraft and shall have been a T/M load team member. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.
CBA Aircraft Mechanic I - Plane Captain (F-18) - NTWP Naval Test Wing China Lake, CA V2X IncCBA Aircraft Mechanic I - Plane Captain (F-18) - NTWP Naval Test Wing China Lake, CAChina Lake, CAThe Aircraft Servicer services aircraft, performing any combination of the following tasks: Directs incoming and outgoing aircraft near terminal or flight line parking area to assist pilots maneuvering of the aircraft on the ground, using hand or light signals or drives light truck with guiding sign. Essential Job Functions: Services aircraft, performing any combination of the following tasks: Directs incoming and outgoing aircraft near terminal area or flight line to assist pilots maneuvering of the aircraft on ground, using hand or light signals or drives light truck with guiding sign.
CBA Aircraft Technician II - Avionics Electrical Technician (C-130) - Naval V2X IncCBA Aircraft Technician II - Avionics Electrical Technician (C-130) - NavalCAExperienced in maintaining their assigned specific T/M/S aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, weapons release and control checks, aircraft conventional weapons load team member, aircraft conventional weapons load team leader, aircraft communications and navigation system and aircraft instruments. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Aircraft Technician II - Avionics Technician (P-3) - Naval Test Wing V2X IncCBA Aircraft Technician II - Avionics Technician (P-3) - Naval Test WingCAExperienced in maintaining their assigned specific T/M/S aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, weapons release and control checks, aircraft conventional weapons load team member, aircraft conventional weapons load team leader, aircraft communications and navigation system and aircraft instruments. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Aircraft Technician II - Avionics Technician (C-130) - Naval Test Wing V2X IncCBA Aircraft Technician II - Avionics Technician (C-130) - Naval Test WingCAExperienced in maintaining their assigned specific T/M/S aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, weapons release and control checks, aircraft conventional weapons load team member, aircraft conventional weapons load team leader, aircraft communications and navigation system and aircraft instruments. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Aircraft Technician II - Avionics Technician (P-3) - Naval Test Wing Pa V2X IncCBA Aircraft Technician II - Avionics Technician (P-3) - Naval Test Wing PaCAExperienced in maintaining their assigned specific T/M/S aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, weapons release and control checks, aircraft conventional weapons load team member, aircraft conventional weapons load team leader, aircraft communications and navigation system and aircraft instruments. Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.)
CBA Aircraft Avionics Technician II (F18) - NTWP - China Lake, CA. V2X IncCBA Aircraft Avionics Technician II (F18) - NTWP - China Lake, CA.CAShall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.) Apply electrical and electronic theory and related knowledge, usually under the direction of engineering staff, to design, build, repair, adjust, and modify electrical components, circuitry, controls, and machinery for subsequent evaluation and use by engineering staff in making engineering design decisions.
Site Manager - Naval Test Wing Pacific - NTWP - China Lake, CA V2X IncSite Manager - Naval Test Wing Pacific - NTWP - China Lake, CACA$130,000–$140,000 / yearSite manager reassigns contractors between work centers as needed to best meet the daily flight schedule requirements, ensures adequate number of qualified personnel are cross-trained to launch and recover all T/M/S aircraft across all hours of operation as defined within the PWS, and ensures contractor personnel support good order, productivity, and cohesiveness within the squadron. Duties and responsibilities include formulating policies, managing daily operations, and planning the use of materials and human resources, but are too diverse and general in nature to be classified in any one functional area of management or administration, such as personnel, purchasing, or administrative services.