Aviation Electrician’s Mate U.S. NavyAviation Electrician’s MateShorewood, WIWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianNorth Oaks, MNWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Aviation Operations & Support (Enlisted) U.S. NavyAviation Operations & Support (Enlisted)Rainsville, ALKey Responsibilities Support aircraft launch and recovery operations in operational environments; assist with aircraft handling, movement, spotting, and securing of aircraft and equipment on flight decks and flight lines; operate aviation support equipment and systems used in aircraft operations; perform inspections and operational checks before and after equipment use; conduct preventive and corrective maintenance on assigned aviation support equipment; support safety practices including foreign object damage (FOD) prevention and emergency readiness; assist with emergency response and training drills related to aviation operations; support administrative and maintenance control activities as required. Work Environment Work primarily in shipboard and shore station aviation environments, including flight decks, hangar bays, and flight lines; exposure to jet blast, rotor wash, noise, heat, weather, and moving equipment is routine; operations occur in a wide range of climates at sea and ashore and often follow the tempo of flight operations, including nights, weekends, and deployments.
NewTOOL / FIXTURE MAKER, 1st Shift - Experience Required Hi-Tek Manufacturing IncTOOL / FIXTURE MAKER, 1st Shift - Experience RequiredMason, OH$25–$35 / hourVerifies conformance of finished workpiece to required tolerances on design drawings using precision measuring equipment, including but not limited to sine plates, gauge blocks, Cadillac gauge, micrometers, calipers, and dial indicators. The Tool/Fixture Maker , reporting to the Toolroom Supervisor, specializes in constructing, repairing, maintaining, and calibrating machine shop dies, jigs, fixtures, and gauges.
NewElectrician Gregory ElectricElectricianAiken, SCSet up and commission electrical distribution and automation systems, including switchgear, transformers, control panels, PLC cabinets, and VFDs. Collaborate effectively with foremen, electricians, apprentices, and project managers to ensure project milestones are met.
Contract Journeyman Electrician RPC CompanyContract Journeyman ElectricianAlbuquerque, NM$33–$35 / hourTemporaryContractorNote: The project is scheduled for 08/31–09/04, but the assignment may end earlier if the work is completed ahead of schedule. Journeyman Electricians: Must have previous electrical experience and bring their own hand tools and drill.
Structures Academy Apprenticeship Mitsubishi Heavy Industries LtdStructures Academy ApprenticeshipTucson, AZOur industry experts will introduce Structures Academy Apprentices to aviation maintenance, safety protocols, aerospace hand tools, non-destructive testing and how to perform hands-on structural (sheet metal) repairs. We provide comprehensive critical operational, engineering and customer support solutions including maintenance, refurbishment, technical publications, marketing and sales activities for the global regional aircraft industry.
Aviation Heavy Equipment Service Technician Apprentice City of Charlotte, North CarolinaAviation Heavy Equipment Service Technician ApprenticeCharlotte, NCThe type of information that will be collected as part of a background check includes, but is not limited to: reference checks, social security verification, education verification, criminal conviction record check, and, if applicable, a credit history check, sex offender registry and motor vehicle records check. The checks must be consistent with the guidelines set forth by these laws requiring organizations to obtain a candidate's written authorization before obtaining a criminal background report, motor vehicle records check or credit report; and to properly store and dispose of information derived from such reports.
Director of Quality Control (Aviation) V2X IncDirector of Quality Control (Aviation)Melbourne, FLMust have experience and skills necessary to provide competent oversight for the following aircraft maintenance quality control tasks: 1) destructive and non-destructive first article testing; 2) establishment and collection of quality metrics; 3) execution of quality plans; 4) preparation and execution quality related tests, data collection and analysis; and 5) conduct manufacturing Source Inspections. Pre-Award & Proposal Development Support: Partner with the Capture Manager to shape the overall Program Management, Execution Approach, and technical volumes, ensuring alignment between proposed technical solutions, staffing models, performance metrics, and long-term contract sustainability.
SkillBridge Aviation Maintenance Internship Dynamic Aviation Group IncSkillBridge Aviation Maintenance InternshipBridgewater, VAWhether modifying aircraft to help protect our service members overseas, performing geographical mapping for scientific research, or working to suppress large wildfires on the West Coast, we serve with integrity and excellence. Job Purpose: As a DoD SkillBridge Aviation Maintenance Intern, you will further develop your aviation maintenance skills with the support of experienced A&P mechanics in a variety of areas to deliver quality and value to a diverse set of customers.
PAINTER (AVIATION) Broward County GovernmentPAINTER (AVIATION)Fort Lauderdale, FL$42,377.30–$67,634.32 / yearRigs and erects scaffolding; hauls and erects ladders; applies waterproofing to building walls; cuts old caulking compounds and inserts new; repairs bad spots in furniture; applies paint remover; neutralizes spots with alcohol or sands or scrapes it; cleans brushes and spray guns and makes minor repairs to equipment and apparatus. Mixes and matches paints and stains using the proper proportions of pigment, base, and thinner; applies paint to interiors and exteriors of buildings; applies paint to special institutions, general building, and other furniture and equipment as well as to a variety of equipment; uses spray gun and brushes.
Aviation Heavy Equipment Service Technician Apprentice City of CharlotteAviation Heavy Equipment Service Technician ApprenticeCharlotte, North CarolinaThe type of information that will be collected as part of a background check includes, but is not limited to: reference checks, social security verification, education verification, criminal conviction record check, and, if applicable, a credit history check, sex offender registry and motor vehicle records check. The checks must be consistent with the guidelines set forth by these laws requiring organizations to obtain a candidate’s written authorization before obtaining a criminal background report, motor vehicle records check or credit report; and to properly store and dispose of information derived from such reports.
Aviation Manual Machinist (Evening & Weekend Shift) Standard AeroAviation Manual Machinist (Evening & Weekend Shift)Dallas, TXWhat you'll do: Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed. Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers.
Aircraft Maintenance- Apprenticeship FlexjetAircraft Maintenance- ApprenticeshipCleveland, OHFlexjet, an award-winning organization, is currently looking for Apprentice Aircraft Maintenance Technicians (AAMTs) to join our team for a career-focused, “earn while you learn”, on-the-job experience with the goal of achieving their A&P (Airframe & Powerplant) license. In coordination with Purdue University’s School of Aviation & Transportation Technology , a premier program in aviation maintenance education, Flexjet apprentices will have access to: Classes and curriculum developed in conjunction with Purdue staff and instructors.
Aviation Maintenance Program Director/Instructor New River Community and Technical CollegeAviation Maintenance Program Director/InstructorGhent, WVIndustry- At least 5 years of practical aviation maintenance experience, including knowledge of 14 CFR Part 147; supervisory, lead, or program coordination experience sufficient to direct personnel, operations and compliance. Maintain facilities, aircraft, equipment, tools, parts, instructional materials, and shop inventory in a safe, serviceable, and instructionally appropriate condition for the ratings held and the number of students enrolled.
Aviation Machinist – C-130 Specialist Yulista SolutionsAviation Machinist – C-130 SpecialistFloridaMaterial Selection: Select and work with a variety of aviation-grade materials, including aluminum alloys, stainless steel, titanium, and high-strength composites, ensuring proper heat treatment and stress relief processes are followed. Precision Machining: Set up and operate conventional and computer numerically controlled (CNC) machine tools, including lathes, milling machines, grinders, and drill presses (HASS VF4/7 and HASS TL-2), to fabricate and repair aircraft parts.
Licensed Journeyman Electrician - All Electric Kelso IndustriesLicensed Journeyman Electrician - All ElectricGillette, WYJoin us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. At Kelso Industries, 4,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide.
NewTool & Die Maker (Aviation) CBA Fort Hood, TX AmentumTool & Die Maker (Aviation) CBA Fort Hood, TXFort Hood, TexasRequires training in machine shop and tool room practices including courses such as blueprint reading, technical drafting, metalworking, or machine tooling; usually acquired through formal apprenticeship or equivalent training and experience; a certificate program from trade, vocational school or equivalent is acceptable. Using various Tool and Die Maker's hand tools and precision measuring instrument, work to very close tolerances, heat-treating metal parts and finished tools and dies to achieve required qualities, and fitting and assembling parts to prescribed tolerances and allowances.
NewTool & Die Maker (Aviation) CBA Fort Hood, TX Amentum Services IncTool & Die Maker (Aviation) CBA Fort Hood, TXFort Hood, TXRequires training in machine shop and tool room practices including courses such as blueprint reading, technical drafting, metalworking, or machine tooling; usually acquired through formal apprenticeship or equivalent training and experience; a certificate program from trade, vocational school or equivalent is acceptable. Using various Tool and Die Maker''s hand tools and precision measuring instrument, work to very close tolerances, heat-treating metal parts and finished tools and dies to achieve required qualities, and fitting and assembling parts to prescribed tolerances and allowances.
Maintenance Technician Apprenticeship Global FoundriesMaintenance Technician ApprenticeshipMalta, NY$36,200–$59,200 / yearUpon successful completion of required courses, positive performance reviews, and 2700 hours of on the job training Maintenance Technician Apprentices will be eligible for a promotion to a Level 2 Maintenance Technician with a corresponding pay adjustment. Maintenance Technicians monitor equipment performance, schedule, perform preventative and corrective maintenance on assigned tool sets, and use mechanical, electronic and PC/software skills to troubleshoot and resolve equipment related issues.